The PARIS Forums


Home » The PARIS Forums » PARIS: Main » how eds 1000 with one mec ?
how eds 1000 with one mec ? [message #107573] Mon, 08 April 2013 02:50 Go to next message
laurent is currently offline  laurent   FRANCE
Messages: 39
Registered: February 2009
Member
hi
just i have 4 eds 1000 ,and it s possible to connect 4 eds with one mec
thanks
laurent
Re: how eds 1000 with one mec ? [message #107575 is a reply to message #107573] Tue, 09 April 2013 12:17 Go to previous messageGo to next message
portscan is currently offline  portscan   FRANCE
Messages: 14
Registered: September 2009
Junior Member
nope
1 mec for 1 eds for 1 card submix for 1 c16
Re: how eds 1000 with one mec ? [message #107576 is a reply to message #107573] Tue, 09 April 2013 12:29 Go to previous messageGo to next message
kerryg is currently offline  kerryg   
Messages: 1529
Registered: February 2009
Senior Member
Administrator
Actually I'm pretty sure I recall that it should be fine. You just connect the four EDS cards as in the manual and then connect the MEC to Card A.

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
Re: how eds 1000 with one mec ? [message #107577 is a reply to message #107573] Tue, 09 April 2013 17:27 Go to previous messageGo to next message
portscan is currently offline  portscan   FRANCE
Messages: 14
Registered: September 2009
Junior Member
apologies
i understood "hard connect 1 mec to several eds"

[Updated on: Tue, 09 April 2013 17:28]

Report message to a moderator

Re: how eds 1000 with one mec ? [message #107578 is a reply to message #107576] Wed, 10 April 2013 02:12 Go to previous messageGo to next message
laurent is currently offline  laurent   FRANCE
Messages: 39
Registered: February 2009
Member
ok
I connect the 4 card with three other one, I tries
super thanks
laurent
Re: how eds 1000 with one mec ? [message #107579 is a reply to message #107578] Wed, 10 April 2013 08:37 Go to previous messageGo to next message
thesandbox1 is currently offline  thesandbox1   UNITED STATES
Messages: 167
Registered: July 2009
Location: Carmel, IN
Senior Member
Yep....you can do up to 8 EDS cards and have only one MEC. Then in each Submix on the Master Fader you can choose which card is the Master if you want to actually record into that submix instead of moving tracks around.

Re: how eds 1000 with one mec ? [message #107594 is a reply to message #107579] Sat, 13 April 2013 06:53 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 477
Registered: February 2009
Location: Canada
Senior Member
My experience with this is that you need to have at least half as many interfaces as you have EDS cards. If you have 8 cards, you'd need interfaces on cards 1, 3, 5, and 7, with a word clock generator.

Having only one interface may work, but there are synchronization errors that lead to time-outs in the PSCL. This causes the PARIS app to become unresponsive for a second or so sometimes, and submixes will just not play sometimes.

With 4 cards, I'd have an MEC on card one, and a 442 on card 3 with a word clock generator. The Hosa one works great, and it's cheap.

I hope this helps.

Mike
Re: how eds 1000 with one mec ? [message #107603 is a reply to message #107594] Mon, 15 April 2013 02:22 Go to previous messageGo to next message
laurent is currently offline  laurent   FRANCE
Messages: 39
Registered: February 2009
Member
hi
thanks for response
i have the second mec in the eds 1000 3 ,and i connect world clock in out with both mec ,i think i make the dimitrios mec it s a good idee or i buy a 442 i don t have
juste a question for mike new asio drivers i can buy it ?
super thanks super guys

laurent
Re: how eds 1000 with one mec ? [message #107609 is a reply to message #107603] Thu, 18 April 2013 13:40 Go to previous messageGo to next message
Oui_Oui is currently offline  Oui_Oui   UNITED STATES
Messages: 51
Registered: December 2009
Member
I'm having the same issue. I just built a Windows 7 computer waiting the arrival of this weekend's Windows 7 driver(thx Mike). My goal is to have two C16s controlling 32 tracks at a time without going to submix. Is this possible? I have some newly purchased 2 more MECs, 2x8in cards (so with what I have now that would make 3x8in cards), 1x8 out card, ADAT card, several 442s, and a PCI expansion chasis with 8 eds cards in it. I know I don't need all of this but in came in one lot. Any ideas how I can complete the goal? Just looking to record 32 tracks at a time with the capability of mixing 32 tracks without having to submix etc....
Thank you
Ron
Re: how eds 1000 with one mec ? [message #107610 is a reply to message #107609] Thu, 18 April 2013 18:51 Go to previous message
Wayne is currently offline  Wayne   UNITED STATES
Messages: 206
Registered: July 2008
Location: Las Vegas
Senior Member
You'll need 2 EDS cards to run 2 C-16s and 32 tracks without a submix. This is my set up with 1 MEC. I slave (hook up the EDS cables) per the manual.

Each EDS card can run 1 C16 and a 16 channel submix.

I only have 1 MEC with 2-8ins so I only record 16 at a time, but I mix via 2 EDS cards and 2 C16s up to 32 tracks.

Wayne

[Updated on: Thu, 18 April 2013 18:53]

Report message to a moderator

Previous Topic: PARIS ASIO dll placement
Next Topic: Just got sub millisecond MIDI sync on Windows 7 64
Goto Forum:
  


Current Time: Thu Dec 05 10:29:34 PST 2024

Total time taken to generate the page: 0.01157 seconds