The PARIS Forums: PARIS: Main » Room acoustics measurement software

Home » The PARIS Forums » PARIS: Main » Room acoustics measurement software

Show: Today's Messages :: Polls :: Message Navigator

Room acoustics measurement software [message #94705]

Tue, 15 January 2008 06:50

Messages: 37
Registered: June 2005

Member

Hi everybody,

I'm redoing the acoustics of my room at home and I'm using suggestions for
bass traps and absorbers from Ethan Winer http://www.ethanwiner.com/acoustics.html

What I would need now is a software (Mac) to measure the nasty ringing frequencies
at a given spot so I can install absorbers and diffusers accurately.
I found this on the net http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
Anyone familiar with this, or maybe other suggestions?
Any help in this domain is highly appreciated.

Best regards,
Ab

Report message to a moderator

Re: Room acoustics measurement software [message #94713 is a reply to message #94705]

Tue, 15 January 2008 08:42

Cujjo

Messages: 325
Registered: June 2007

Senior Member

What kind of mic do you need and how do you input it into the mac?

"Ab" <ab.vangoor@wanadoo.fr> wrote:
>
>Hi everybody,
>
>I'm redoing the acoustics of my room at home and I'm using suggestions for
>bass traps and absorbers from Ethan Winer http://www.ethanwiner.com/acoustics.html
>
>What I would need now is a software (Mac) to measure the nasty ringing frequencies
>at a given spot so I can install absorbers and diffusers accurately.
>I found this on the net http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
>Anyone familiar with this, or maybe other suggestions?
>Any help in this domain is highly appreciated.
>
>Best regards,
>Ab

Report message to a moderator

Re: Room acoustics measurement software [message #94717 is a reply to message #94705]

Tue, 15 January 2008 08:42

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

You can pretty well cut the cost by 2/3rds if you are able to do the DIY
thing

www.recording.org has a acoustics thread...check it out

also John L. Sayers forum at http://www.johnlsayers.com/phpBB2/index.php

Lot's of good ideas as well as experienced people to answer your questions

As for software I used ETF 1.5 as well as a couple of others but
unfortunately I lost them when my Laptop died

Don

"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cba32$1@linux...
>
> Hi everybody,
>
> I'm redoing the acoustics of my room at home and I'm using suggestions for
> bass traps and absorbers from Ethan Winer
> http://www.ethanwiner.com/acoustics.html
>
> What I would need now is a software (Mac) to measure the nasty ringing
> frequencies
> at a given spot so I can install absorbers and diffusers accurately.
> I found this on the net
> http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
> Anyone familiar with this, or maybe other suggestions?
> Any help in this domain is highly appreciated.
>
> Best regards,
> Ab

Report message to a moderator

Re: Room acoustics measurement software [message #94718 is a reply to message #94713]

Tue, 15 January 2008 09:58

Messages: 37
Registered: June 2005

Member

I was thinking of using a B&K 4006 (omni) through Metric Halo ULN2 interface.
I'd only need the software.

Regards,
Ab

"Cujo" <chris@applemanstudio.com> wrote:
>
>
>
>What kind of mic do you need and how do you input it into the mac?
>
>"Ab" <ab.vangoor@wanadoo.fr> wrote:
>>
>>Hi everybody,
>>
>>I'm redoing the acoustics of my room at home and I'm using suggestions
for
>>bass traps and absorbers from Ethan Winer http://www.ethanwiner.com/acoustics.html
>>
>>What I would need now is a software (Mac) to measure the nasty ringing
frequencies
>>at a given spot so I can install absorbers and diffusers accurately.
>>I found this on the net http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
>>Anyone familiar with this, or maybe other suggestions?
>>Any help in this domain is highly appreciated.
>>
>>Best regards,
>>Ab
>

Report message to a moderator

Re: Room acoustics measurement software [message #94719 is a reply to message #94705]

Tue, 15 January 2008 09:14

tonehouse

Messages: 184
Registered: July 2006

Senior Member

SpectraFoo is great if you want to spen the money.....
"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cba32$1@linux...
>
> Hi everybody,
>
> I'm redoing the acoustics of my room at home and I'm using suggestions for
> bass traps and absorbers from Ethan Winer
http://www.ethanwiner.com/acoustics.html
>
> What I would need now is a software (Mac) to measure the nasty ringing
frequencies
> at a given spot so I can install absorbers and diffusers accurately.
> I found this on the net
http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
> Anyone familiar with this, or maybe other suggestions?
> Any help in this domain is highly appreciated.
>
> Best regards,
> Ab

Report message to a moderator

Re: Room acoustics measurement software [message #94723 is a reply to message #94719]

Tue, 15 January 2008 11:17

Messages: 37
Registered: June 2005

Member

I agree, I use MH interfaces all the time but hoped to get along with a less

pricier software for my needs. Thanks anyway.

Regards
Ab

"tonehouse" <zmcleod@comcast.net> wrote:
>SpectraFoo is great if you want to spen the money.....
>"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cba32$1@linux...
>>
>> Hi everybody,
>>
>> I'm redoing the acoustics of my room at home and I'm using suggestions
for
>> bass traps and absorbers from Ethan Winer
>http://www.ethanwiner.com/acoustics.html
>>
>> What I would need now is a software (Mac) to measure the nasty ringing
>frequencies
>> at a given spot so I can install absorbers and diffusers accurately.
>> I found this on the net
> http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
>> Anyone familiar with this, or maybe other suggestions?
>> Any help in this domain is highly appreciated.
>>
>> Best regards,
>> Ab
>
>

Report message to a moderator

Re: Room acoustics measurement software [message #94746 is a reply to message #94717]

Tue, 15 January 2008 17:11

Messages: 37
Registered: June 2005

Member

Don, thanks for the info.
In fact, this project is a DIY one and since it's the first time I do a thing
like that
it's a hell of an adventure. I'm sure the room will sound better than before.

Regards,
Ab

"Don Nafe" <dnafe@magma.ca> wrote:
>You can pretty well cut the cost by 2/3rds if you are able to do the DIY

>thing
>
>www.recording.org has a acoustics thread...check it out
>
>also John L. Sayers forum at http://www.johnlsayers.com/phpBB2/index.php
>
>Lot's of good ideas as well as experienced people to answer your questions
>
>As for software I used ETF 1.5 as well as a couple of others but
>unfortunately I lost them when my Laptop died
>
>Don
>
>
>"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cba32$1@linux...
>>
>> Hi everybody,
>>
>> I'm redoing the acoustics of my room at home and I'm using suggestions
for
>> bass traps and absorbers from Ethan Winer
>> http://www.ethanwiner.com/acoustics.html
>>
>> What I would need now is a software (Mac) to measure the nasty ringing

>> frequencies
>> at a given spot so I can install absorbers and diffusers accurately.
>> I found this on the net
>> http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=info
>> Anyone familiar with this, or maybe other suggestions?
>> Any help in this domain is highly appreciated.
>>
>> Best regards,
>> Ab
>
>

Report message to a moderator

Re: Room acoustics measurement software [message #94762 is a reply to message #94723]

Wed, 16 January 2008 07:13

tonehouse

Messages: 184
Registered: July 2006

Senior Member

Check out Craig Anderton's new room tuning software package..this month's EQ
magazine...very cool...not sure of the price...
"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cf89c$1@linux...
>
> I agree, I use MH interfaces all the time but hoped to get along with a
less
>
> pricier software for my needs. Thanks anyway.
>
> Regards
> Ab
>
> "tonehouse" <zmcleod@comcast.net> wrote:
> >SpectraFoo is great if you want to spen the money.....
> >"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cba32$1@linux...
> >>
> >> Hi everybody,
> >>
> >> I'm redoing the acoustics of my room at home and I'm using suggestions
> for
> >> bass traps and absorbers from Ethan Winer
> >http://www.ethanwiner.com/acoustics.html
> >>
> >> What I would need now is a software (Mac) to measure the nasty ringing
> >frequencies
> >> at a given spot so I can install absorbers and diffusers accurately.
> >> I found this on the net
>
> http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=inf
o
> >> Anyone familiar with this, or maybe other suggestions?
> >> Any help in this domain is highly appreciated.
> >>
> >> Best regards,
> >> Ab
> >
> >
>

Report message to a moderator

Re: Room acoustics measurement software [message #94784 is a reply to message #94762]

Wed, 16 January 2008 16:27

Messages: 37
Registered: June 2005

Member

I googled but couldn't find it. Do you have a link?
Thanks,
Ab

"tonehouse" <zmcleod@comcast.net> wrote:
>Check out Craig Anderton's new room tuning software package..this month's
EQ
>magazine...very cool...not sure of the price...
>"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cf89c$1@linux...
>>
>> I agree, I use MH interfaces all the time but hoped to get along with
a
>less
>>
>> pricier software for my needs. Thanks anyway.
>>
>> Regards
>> Ab
>>
>> "tonehouse" <zmcleod@comcast.net> wrote:
>> >SpectraFoo is great if you want to spen the money.....
>> >"Ab" <ab.vangoor@wanadoo.fr> wrote in message news:478cba32$1@linux...
>> >>
>> >> Hi everybody,
>> >>
>> >> I'm redoing the acoustics of my room at home and I'm using suggestions
>> for
>> >> bass traps and absorbers from Ethan Winer
>> >http://www.ethanwiner.com/acoustics.html
>> >>
>> >> What I would need now is a software (Mac) to measure the nasty ringing
>> >frequencies
>> >> at a given spot so I can install absorbers and diffusers accurately.
>> >> I found this on the net
>>
>> http://www.versiontracker.com/dyn/moreinfo/macosx/25161& vid=470175&mode=inf
>o
>> >> Anyone familiar with this, or maybe other suggestions?
>> >> Any help in this domain is highly appreciated.
>> >>
>> >> Best regards,
>> >> Ab
>> >
>> >
>>
>
>

Report message to a moderator

Previous Topic:	DOuble Checking PUAD Plate sample Slide values
Next Topic:	Spanish for your Nanny

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 13 15:16:35 PST 2024

Total time taken to generate the page: 0.01154 seconds