The PARIS Forums: PARIS: Main » Lightpipe loop from SX 3 using 2408 Mk II

Home » The PARIS Forums » PARIS: Main » Lightpipe loop from SX 3 using 2408 Mk II

Show: Today's Messages :: Polls :: Message Navigator

Lightpipe loop from SX 3 using 2408 Mk II [message #64791]

Tue, 21 February 2006 21:28

JB
Messages: 24
Registered: December 2005

Junior Member

Just got an ADAT card. Wondering how I might set this up:

I'm looking to patch channels off the 8-way lightpipe in directly to an 8-channel
out (ie, a Send from the 2408 through the lightpipe). Then I'm trying to
direct patch the corresponding 8-channel ins back to the 8-way lightpipe
out (ie, a Return via the lightpipe).

Make any sense? I've gotten used to all the bells and whistles in Cubase
but I still just *like* the sound of the PARIS converters vs the 2408 converters.
So I'm trying to use the lightpipe as a big ol' FX loop.

I'm running a single-MEC system on XP. One active 8in (i have a second in
but have already gone into the patch bay and swapped it out for the ADAT
card), one active 8out, and one ADAT card.

Doable?

Report message to a moderator

Re: Lightpipe loop from SX 3 using 2408 Mk II [message #64794 is a reply to message #64791]

Tue, 21 February 2006 22:17

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI,
Not clear on what your trying to do,
If you mean that you want to loop audio via ADAT out then back into
Cubase then it is not necessary to do so sense you can just export of
freeze any of the track that you need to bounce/render.

If you are trying to send 8 channels out of the MOTU into Paris in order
to bypass the 2408's mediocre converters and just use Paris as better
AD/DA then yes that will work.

Chris

JB wrote:
> Just got an ADAT card. Wondering how I might set this up:
>
> I'm looking to patch channels off the 8-way lightpipe in directly to an 8-channel
> out (ie, a Send from the 2408 through the lightpipe). Then I'm trying to
> direct patch the corresponding 8-channel ins back to the 8-way lightpipe
> out (ie, a Return via the lightpipe).
>
> Make any sense? I've gotten used to all the bells and whistles in Cubase
> but I still just *like* the sound of the PARIS converters vs the 2408 converters.
> So I'm trying to use the lightpipe as a big ol' FX loop.
>
> I'm running a single-MEC system on XP. One active 8in (i have a second in
> but have already gone into the patch bay and swapped it out for the ADAT
> card), one active 8out, and one ADAT card.
>
> Doable?
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Re: Lightpipe loop from SX 3 using 2408 Mk II [message #64813 is a reply to message #64794]

Wed, 22 February 2006 16:32

JB
Messages: 24
Registered: December 2005

Junior Member

>If you are trying to send 8 channels out of the MOTU into Paris in order

>to bypass the 2408's mediocre converters and just use Paris as better
>AD/DA then yes that will work.

Yes, that's EXACTLY what I'm trying to do.

Maybe I'm just clueless. I don't have an ADAT manual, so let me describe
what I've done so far:

Installed back card
Installed front card
Connected 2408 to ADAT card with lightpipe only (no sync connection)
Started PARIS 3.0
Opened patch bay
Configured "MEC Modules" to include ADAT in (1-8) and A8i (9-16)
Configured "MEC Modules" to include ADAT out (1-8) and A8o (9-16)
Patched ADAT in 3-4 to A8out 3-4 to PCM90
Patched PCM90 to A8in 3-4 to ADAT out 3-4

The 2408 shows that it's sending from SX on ADAT 3-4 but nothing comes back.

The ADAT card has two solid green indicators on it; "optical lock" changes
from blinking to solid (as I would expect it to) depending on if the 2408
is present or not.

Breaking the loop and patching ADAT in 3-4 to the mixer doesn't yield any
joy, either. I'd expect to see the signal inbound from SX appear at the
mixer in that scenario but it doesn't.

I'm using 24bit and 48K in Cubase and PARIS. The clocking is currently derived
from PARIS SPDIF. I've been using the SPDIF connection in this fashion for
a few months now and it works very well indeed.

Is there some other process required? I see that clicking on the ADAT module
brings up what appears to be a "remote arming/transport" window but PARIS
tells me that doesn't apply since there isn't a remote ADAT.

Any advice would be helpful. I guess I just kinda figured that the ADAT
card, even though it would truncate to 20 bits, wouldn't have any trouble
with a 24-bit lightpipe and I'd be able to basically mirror my SPDIF connnection
(digital in patched directly to analog out, analog in patched directly to
digital out). Like Chris said, basically using PARIS as a digital mixer
for zero-latency monitoring and improved conversion.

Thanks!

Report message to a moderator

Re: Lightpipe loop from SX 3 using 2408 Mk II [message #64814 is a reply to message #64813]

Wed, 22 February 2006 15:48

EK Sound

Messages: 939
Registered: June 2005

Senior Member

Did you run any "patch cables" inside the Paris patchbay window???

David.

JB wrote:
>>If you are trying to send 8 channels out of the MOTU into Paris in order
>
>
>>to bypass the 2408's mediocre converters and just use Paris as better
>>AD/DA then yes that will work.
>
>
> Yes, that's EXACTLY what I'm trying to do.
>
> Maybe I'm just clueless. I don't have an ADAT manual, so let me describe
> what I've done so far:
>
> Installed back card
> Installed front card
> Connected 2408 to ADAT card with lightpipe only (no sync connection)
> Started PARIS 3.0
> Opened patch bay
> Configured "MEC Modules" to include ADAT in (1-8) and A8i (9-16)
> Configured "MEC Modules" to include ADAT out (1-8) and A8o (9-16)
> Patched ADAT in 3-4 to A8out 3-4 to PCM90
> Patched PCM90 to A8in 3-4 to ADAT out 3-4
>
> The 2408 shows that it's sending from SX on ADAT 3-4 but nothing comes back.
>
> The ADAT card has two solid green indicators on it; "optical lock" changes
> from blinking to solid (as I would expect it to) depending on if the 2408
> is present or not.
>
> Breaking the loop and patching ADAT in 3-4 to the mixer doesn't yield any
> joy, either. I'd expect to see the signal inbound from SX appear at the
> mixer in that scenario but it doesn't.
>
> I'm using 24bit and 48K in Cubase and PARIS. The clocking is currently derived
> from PARIS SPDIF. I've been using the SPDIF connection in this fashion for
> a few months now and it works very well indeed.
>
> Is there some other process required? I see that clicking on the ADAT module
> brings up what appears to be a "remote arming/transport" window but PARIS
> tells me that doesn't apply since there isn't a remote ADAT.
>
> Any advice would be helpful. I guess I just kinda figured that the ADAT
> card, even though it would truncate to 20 bits, wouldn't have any trouble
> with a 24-bit lightpipe and I'd be able to basically mirror my SPDIF connnection
> (digital in patched directly to analog out, analog in patched directly to
> digital out). Like Chris said, basically using PARIS as a digital mixer
> for zero-latency monitoring and improved conversion.
>
> Thanks!
>

Report message to a moderator

Re: Lightpipe loop from SX 3 using 2408 Mk II [message #64821 is a reply to message #64814]

Wed, 22 February 2006 21:13

JB
Messages: 24
Registered: December 2005

Junior Member

EK Sound <askme@nospam.com> wrote:
>Did you run any "patch cables" inside the Paris patchbay window???
>
>David.

Yes. I'd "soft-patched" digital to analog using the PARIS patchbay.

So I fired everything up tonight using the same config and it worked flawlessly
all night exactly as you and I would have expected. Go figure. Can't really
explain what was garfed up last night.

Maybe it was the burnt offering where I called upon the spirit of Mr. Simplicity.

Or it might just be time to check the meds again. : )

Bless both your hearts for your timely attention and assistance. I'll ping
back if it acts up again but I'm fairly confident it should be good now.

Report message to a moderator

Previous Topic:	OT paypal...i have an account
Next Topic:	paypal is no set up

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Jun 13 01:07:36 PDT 2025

Total time taken to generate the page: 0.00796 seconds