Home » The PARIS Forums » PARIS: Main » HELP!-No interface connected to master card error.18/12 code
| HELP!-No interface connected to master card error.18/12 code [message #64215] |
Sun, 05 February 2006 21:31  |
Pete
Messages: 7
Registered: February 2006
|
Junior Member |
|
|
So I've gone out of town and decided to take a scaled down
version of my rig to do some mixing.
Previous settup:
4 EDS
2 MEC
PARIS 3.0 all clocked with GenX
I've brought with me 1 MEC and planned to use the internal clock.
Hooked everything up and I get error intializing PARIS engine.
No interface connected to master card.I've also gotten a 18/12
error.
In the Paris.cfg file I noticed MasterOutput Card=0.Should the 0
be an actual number(1 maybe)?
Any help?
Guess I should just not mess with the rig when its working.
TIA,
Pete
|
|
|
|
|
|
|
|
| Re: HELP!-No interface connected to master card error.18/12 code [message #64237 is a reply to message #64232] |
Mon, 06 February 2006 10:24  |
Pete
Messages: 7
Registered: February 2006
|
Junior Member |
|
|
I've got 1 ADAT in the mec,but I don't thik this is the
problem.
I installed 1 EDS and it was saying not enough free resources.
I was getting gcCreateControl:ran out of controllers.[0/0}
Still wondering if I had my word clock would I have had these
issues at all;should of remembered to bring the damn thing.
Pete
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>This happened to me using Paris XP and two
>ADAT modules in one MEC. If you can lose an
>ADAT module or split them into two MECs it
>should be okay.
>Tom
> "Pete" <ruthenburg@insightbb.com> wrote in message =
>news:43e76e53$1@linux...
>
> Looks like the 18/12 is an ADAT issue,but I've only gotten this
> 1 time.
>
> I didn't bring my GenX clock and I'm wondering if that is my
> problem.I figured since I was using just 1 MEC I didn't need it
> though most of my projects were clocked with it.
> Figured I could open the projects then switch them to internal
> clock;maybe I was wrong.I'm trying to open a default project=20
> then opening the other projects,but no worky so far.
>
> Pete
>
> "Pete Ruthenburg" <ruthenburg@insightbb.com> wrote:
> >
> > So I've gone out of town and decided to take a scaled down=20
> >version of my rig to do some mixing.
> > Previous settup:
> > 4 EDS
> > 2 MEC
> > PARIS 3.0 all clocked with GenX
> >
> >I've brought with me 1 MEC and planned to use the internal clock.
> >
> >Hooked everything up and I get error intializing PARIS engine.
> >No interface connected to master card.I've also gotten a 18/12
> >error.
> >
> >In the Paris.cfg file I noticed MasterOutput Card=3D0.Should the 0
> >be an actual number(1 maybe)?
> >
> >Any help?
> >Guess I should just not mess with the rig when its working.
> >
> >TIA,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>This happened to me using Paris XP and=20
>two</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT modules in one MEC. If you =
>can lose=20
>an</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT module or split them into two MECs
=
>
>it</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>should be okay.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:43e76e53$1@linux">news:43e76e53$1@linux</A>...</DIV><BR>Look=
>s like=20
> the 18/12 is an ADAT issue,but I've only gotten this<BR>1 =
>time.<BR><BR>I=20
> didn't bring my GenX clock and I'm wondering if that is =
>my<BR>problem.I=20
> figured since I was using just 1 MEC I didn't need it<BR>though most =
>of my=20
> projects were clocked with it.<BR> Figured I could open the =
>projects=20
> then switch them to internal<BR>clock;maybe I was wrong.I'm trying to
=
>open a=20
> default project <BR>then opening the other projects,but no worky so=20
> far.<BR><BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
>=20
> wrote:<BR>><BR>> So I've gone out of town and decided to take a =
>scaled=20
> down <BR>>version of my rig to do some mixing.<BR>> =
>Previous=20
> =
>settup:<BR>> &nbs=
>p; =20
> 4=20
> =
>EDS<BR>> &n=
>bsp; =20
> 2=20
> =
>MEC<BR>> &n=
>bsp; =20
> PARIS 3.0 all clocked with GenX<BR>><BR>>I've brought with me 1 =
>MEC and=20
> planned to use the internal clock.<BR>><BR>>Hooked everything up =
>and I=20
> get error intializing PARIS engine.<BR>>No interface connected to =
>master=20
> card.I've also gotten a 18/12<BR>>error.<BR>><BR>>In the =
>Paris.cfg=20
> file I noticed MasterOutput Card=3D0.Should the 0<BR>>be an actual =
>number(1=20
> maybe)?<BR>><BR>>Any help?<BR>>Guess I should just not mess =
>with the=20
> rig when its=20
>working.<BR>><BR>>TIA,<BR>>Pete<BR></BLOCKQUOTE></BODY ></HTML>
>
>
|
|
|
|
| Re: HELP!-No interface connected to master card error.18/12 code [message #64239 is a reply to message #64232] |
Mon, 06 February 2006 10:34 |
Pete
Messages: 7
Registered: February 2006
|
Junior Member |
|
|
forgot to say when I have the 1 EDS installed it intializes,
but after that is when I get the not enough free resources
error.
Thanks Tom,
Pete
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>This happened to me using Paris XP and two
>ADAT modules in one MEC. If you can lose an
>ADAT module or split them into two MECs it
>should be okay.
>Tom
> "Pete" <ruthenburg@insightbb.com> wrote in message =
>news:43e76e53$1@linux...
>
> Looks like the 18/12 is an ADAT issue,but I've only gotten this
> 1 time.
>
> I didn't bring my GenX clock and I'm wondering if that is my
> problem.I figured since I was using just 1 MEC I didn't need it
> though most of my projects were clocked with it.
> Figured I could open the projects then switch them to internal
> clock;maybe I was wrong.I'm trying to open a default project=20
> then opening the other projects,but no worky so far.
>
> Pete
>
> "Pete Ruthenburg" <ruthenburg@insightbb.com> wrote:
> >
> > So I've gone out of town and decided to take a scaled down=20
> >version of my rig to do some mixing.
> > Previous settup:
> > 4 EDS
> > 2 MEC
> > PARIS 3.0 all clocked with GenX
> >
> >I've brought with me 1 MEC and planned to use the internal clock.
> >
> >Hooked everything up and I get error intializing PARIS engine.
> >No interface connected to master card.I've also gotten a 18/12
> >error.
> >
> >In the Paris.cfg file I noticed MasterOutput Card=3D0.Should the 0
> >be an actual number(1 maybe)?
> >
> >Any help?
> >Guess I should just not mess with the rig when its working.
> >
> >TIA,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>This happened to me using Paris XP and=20
>two</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT modules in one MEC. If you =
>can lose=20
>an</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT module or split them into two MECs
=
>
>it</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>should be okay.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:43e76e53$1@linux">news:43e76e53$1@linux</A>...</DIV><BR>Look=
>s like=20
> the 18/12 is an ADAT issue,but I've only gotten this<BR>1 =
>time.<BR><BR>I=20
> didn't bring my GenX clock and I'm wondering if that is =
>my<BR>problem.I=20
> figured since I was using just 1 MEC I didn't need it<BR>though most =
>of my=20
> projects were clocked with it.<BR> Figured I could open the =
>projects=20
> then switch them to internal<BR>clock;maybe I was wrong.I'm trying to
=
>open a=20
> default project <BR>then opening the other projects,but no worky so=20
> far.<BR><BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
>=20
> wrote:<BR>><BR>> So I've gone out of town and decided to take a =
>scaled=20
> down <BR>>version of my rig to do some mixing.<BR>> =
>Previous=20
> =
>settup:<BR>> &nbs=
>p; =20
> 4=20
> =
>EDS<BR>> &n=
>bsp; =20
> 2=20
> =
>MEC<BR>> &n=
>bsp; =20
> PARIS 3.0 all clocked with GenX<BR>><BR>>I've brought with me 1 =
>MEC and=20
> planned to use the internal clock.<BR>><BR>>Hooked everything up =
>and I=20
> get error intializing PARIS engine.<BR>>No interface connected to =
>master=20
> card.I've also gotten a 18/12<BR>>error.<BR>><BR>>In the =
>Paris.cfg=20
> file I noticed MasterOutput Card=3D0.Should the 0<BR>>be an actual =
>number(1=20
> maybe)?<BR>><BR>>Any help?<BR>>Guess I should just not mess =
>with the=20
> rig when its=20
>working.<BR>><BR>>TIA,<BR>>Pete<BR></BLOCKQUOTE></BODY ></HTML>
>
>
|
|
|
|
|
|
| Re: HELP!-No interface connected to master card error.18/12 code [message #64247 is a reply to message #64240] |
Mon, 06 February 2006 11:21 |
Pete
Messages: 7
Registered: February 2006
|
Junior Member |
|
|
Hi Curt,
On XP here.I've now got 1 EDS ,took out the ADAT card from the
MEC.I'm about to take out the other 8in and 8 out and try that.
Its looking like I'm going to have trouble getting a 1EDS
stripped down MEC running.
When I try and open a default project it says there aren't
enough resources.Guess I might have to do a fresj install.
Thanks,
Pete
Curt Cassingham <mail@mail.com> wrote:
>On 2/6/2006 10:34 AM, Pete wrote:
>
>> forgot to say when I have the 1 EDS installed it intializes,
>> but after that is when I get the not enough free resources
>> error.
>
>Windows or Mac? Did you try a completely fresh install? IOW, let PARIS
create its
>own new Config files, etc?
>
>I had a similar situation here. I have just one EDS card and a 442 on Win
XP. System
>working fine until I installed a new PCI card (unrelated to PARIS) in the
computer,
>and had to rearrange all the PCI cards including the EDI to different slots.
Finally
>found out in the Hardware Manager the computer thought the EDS card was
still in the
>old slot. I uninstalled the card from Hardware Manger, thereby forcing
it to realize
>the new card location, reinstalled PARIS, and all was fine.
>
>Curt
>curt <at> curtcass <dot> com
|
|
|
|
| Re: HELP!-No interface connected to master card error.18/12 code [message #64249 is a reply to message #64247] |
Mon, 06 February 2006 10:43 |
EK Sound
Messages: 939
Registered: June 2005
|
Senior Member |
|
|
Is your EDS card in a PCI slot that is sharing resources with
something else? Check your IRQ's
David.
Pete wrote:
> Hi Curt,
> On XP here.I've now got 1 EDS ,took out the ADAT card from the
> MEC.I'm about to take out the other 8in and 8 out and try that.
> Its looking like I'm going to have trouble getting a 1EDS
> stripped down MEC running.
> When I try and open a default project it says there aren't
> enough resources.Guess I might have to do a fresj install.
>
> Thanks,
> Pete
>
> Curt Cassingham <mail@mail.com> wrote:
>
>>On 2/6/2006 10:34 AM, Pete wrote:
>>
>>
>>>forgot to say when I have the 1 EDS installed it intializes,
>>>but after that is when I get the not enough free resources
>>>error.
>>
>>Windows or Mac? Did you try a completely fresh install? IOW, let PARIS
>
> create its
>
>>own new Config files, etc?
>>
>>I had a similar situation here. I have just one EDS card and a 442 on Win
>
> XP. System
>
>>working fine until I installed a new PCI card (unrelated to PARIS) in the
>
> computer,
>
>>and had to rearrange all the PCI cards including the EDI to different slots.
>
> Finally
>
>>found out in the Hardware Manager the computer thought the EDS card was
>
> still in the
>
>>old slot. I uninstalled the card from Hardware Manger, thereby forcing
>
> it to realize
>
>>the new card location, reinstalled PARIS, and all was fine.
>>
>>Curt
>>curt <at> curtcass <dot> com
>
>
|
|
|
|
| Re: HELP!-No interface connected to master card error.18/12 code [message #64269 is a reply to message #64249] |
Mon, 06 February 2006 19:47 |
Pete
Messages: 7
Registered: February 2006
|
Junior Member |
|
|
Checked the IRQs;all is good.When I have 1 EDS installed it
intializes,but then gives me I/O is different than before.Hit ok
it gives me same error,hit ok again then gives me error creating
default project adn a new project will be opened.Then I get
not enough resources and the gcCreateControl error.
If I have all 4 EDS cards in I just get "no interface connected
to master card"when intializing.Still wondering if having my
wordclock connected would fix this.
Thanks,
Pete
EK Sound <spamnot.info@eksoundNO.com> wrote:
>Is your EDS card in a PCI slot that is sharing resources with
>something else? Check your IRQ's
>
>David.
>
>Pete wrote:
>> Hi Curt,
>> On XP here.I've now got 1 EDS ,took out the ADAT card from the
>> MEC.I'm about to take out the other 8in and 8 out and try that.
>> Its looking like I'm going to have trouble getting a 1EDS
>> stripped down MEC running.
>> When I try and open a default project it says there aren't
>> enough resources.Guess I might have to do a fresj install.
>>
>> Thanks,
>> Pete
>>
>> Curt Cassingham <mail@mail.com> wrote:
>>
>>>On 2/6/2006 10:34 AM, Pete wrote:
>>>
>>>
>>>>forgot to say when I have the 1 EDS installed it intializes,
>>>>but after that is when I get the not enough free resources
>>>>error.
>>>
>>>Windows or Mac? Did you try a completely fresh install? IOW, let PARIS
>>
>> create its
>>
>>>own new Config files, etc?
>>>
>>>I had a similar situation here. I have just one EDS card and a 442 on
Win
>>
>> XP. System
>>
>>>working fine until I installed a new PCI card (unrelated to PARIS) in
the
>>
>> computer,
>>
>>>and had to rearrange all the PCI cards including the EDI to different
slots.
>>
>> Finally
>>
>>>found out in the Hardware Manager the computer thought the EDS card was
>>
>> still in the
>>
>>>old slot. I uninstalled the card from Hardware Manger, thereby forcing
>>
>> it to realize
>>
>>>the new card location, reinstalled PARIS, and all was fine.
>>>
>>>Curt
>>>curt <at> curtcass <dot> com
>>
>>
|
|
|
|
Goto Forum:
Current Time: Mon Nov 25 07:30:48 PST 2024
Total time taken to generate the page: 0.04758 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
