Home » The PARIS Forums » PARIS: Main » Cubase SX HELP PLEASE
| Cubase SX HELP PLEASE [message #69727] |
Tue, 27 June 2006 17:19  |
![brandon[2] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "brandon[2] is currently offline")
brandon[2]
Messages: 380
Registered: June 2006
|
Senior Member |
|
|
Ok guys..I have these saved project files I am trying to open and listen to,
but I can't hear squat.
I can create a new project and import an audio file and everything is fine.
I can hear it thru my card.
But I open one of the saved project files and I can see the individual channel
meters LEDs moving, but nothing on the stereo out meters. I have tried configuring
the VST Connections
and they look identical to the newly created project, but no go.
These were created on someone elses computer so I am thinking it is a config
issue, but I cant figure it out. All the tracks and plugs loaded up nicely,
but no SOUND thru the stereo outs.
ANY IDEAS?
Arg!!
Thanks
b
|
|
|
|
|
|
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69735 is a reply to message #69729] |
Wed, 28 June 2006 02:21  |
Martin Harrington
Messages: 560
Registered: September 2005
|
Senior Member |
|
|
Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
either/or.Have you read the setup manual for the card?
Set it for the Cubase settings, From memory here...That's how I remember
initial setting it up, actually, I think there are a few presets setup for
the card in the software.
--
Martin Harrington
www.lendanear-sound.com
"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>
> Yes different sound card.
> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
> EMU is my new EMU0404 sound card.
> In the VST Connections / outputs tab......it only gives
> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
> In the Input tab it lets me select all 8 of the inputs if I want.(that are
> associated with this card).
>
>
>
>
>
> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>Maybe the config details of your friends computer are different to yours.
>>Does he have a different sound card?
>>If so, the setup info that is transferred to your computer will not match
>
>>yours.
>>Have you selected your soundcard in the VST connections window?
>>--
>>Martin Harrington
>>www.lendanear-sound.com
>>
>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>
>>> Ok guys..I have these saved project files I am trying to open and listen
>
>>> to,
>>> but I can't hear squat.
>>> I can create a new project and import an audio file and everything is
>
>>> fine.
>>> I can hear it thru my card.
>>> But I open one of the saved project files and I can see the individual
>
>>> channel
>>> meters LEDs moving, but nothing on the stereo out meters. I have tried
>
>>> configuring
>>> the VST Connections
>>> and they look identical to the newly created project, but no go.
>>> These were created on someone elses computer so I am thinking it is a
>
>>> config
>>> issue, but I cant figure it out. All the tracks and plugs loaded up
>>> nicely,
>>> but no SOUND thru the stereo outs.
>>> ANY IDEAS?
>>> Arg!!
>>>
>>> Thanks
>>> b
>>
>>
>
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69748 is a reply to message #69735] |
Wed, 28 June 2006 10:09 |
brandon[2]
Messages: 380
Registered: June 2006
|
Senior Member |
|
|
Hmm...I read all the documentation and I don't recal a preset for Softwares
such as Cubase. I will check again though.
Thanks.
Also, is it possible to send from Cubase with the 0404 by way of lightpipe
into the ADAT module on the MEC or are these different formats? OR would
I have to go out the Spdif's for digital xfers?
THANKS!!!!!!!!
b
"Martin Harrington" <lendan@bigpond.net.au> wrote:
>Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
>either/or.Have you read the setup manual for the card?
>Set it for the Cubase settings, From memory here...That's how I remember
>initial setting it up, actually, I think there are a few presets setup for
>the card in the software.
>--
>Martin Harrington
>www.lendanear-sound.com
>
>"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>>
>> Yes different sound card.
>> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
>> EMU is my new EMU0404 sound card.
>> In the VST Connections / outputs tab......it only gives
>> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
>> In the Input tab it lets me select all 8 of the inputs if I want.(that
are
>> associated with this card).
>>
>>
>>
>>
>>
>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>Maybe the config details of your friends computer are different to yours.
>>>Does he have a different sound card?
>>>If so, the setup info that is transferred to your computer will not match
>>
>>>yours.
>>>Have you selected your soundcard in the VST connections window?
>>>--
>>>Martin Harrington
>>>www.lendanear-sound.com
>>>
>>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>>
>>>> Ok guys..I have these saved project files I am trying to open and listen
>>
>>>> to,
>>>> but I can't hear squat.
>>>> I can create a new project and import an audio file and everything is
>>
>>>> fine.
>>>> I can hear it thru my card.
>>>> But I open one of the saved project files and I can see the individual
>>
>>>> channel
>>>> meters LEDs moving, but nothing on the stereo out meters. I have tried
>>
>>>> configuring
>>>> the VST Connections
>>>> and they look identical to the newly created project, but no go.
>>>> These were created on someone elses computer so I am thinking it is
a
>>
>>>> config
>>>> issue, but I cant figure it out. All the tracks and plugs loaded up
>>>> nicely,
>>>> but no SOUND thru the stereo outs.
>>>> ANY IDEAS?
>>>> Arg!!
>>>>
>>>> Thanks
>>>> b
>>>
>>>
>>
>
>
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69759 is a reply to message #69748] |
Wed, 28 June 2006 16:47 |
Martin Harrington
Messages: 560
Registered: September 2005
|
Senior Member |
|
|
Not sure about the lightpipe/optical outs into ADAT, (I'd say they were
different), but I'd be going out SPdif.
As to the Cubase setting...going from memory over 2 years ago..not sure.
I thought there was various software settings though.
I'll check when I get to the studio later today.
--
Martin Harrington
www.lendanear-sound.com
"Brandon" <a@a.com> wrote in message news:44a2b7b4$1@linux...
>
>
> Hmm...I read all the documentation and I don't recal a preset for
> Softwares
> such as Cubase. I will check again though.
> Thanks.
> Also, is it possible to send from Cubase with the 0404 by way of lightpipe
> into the ADAT module on the MEC or are these different formats? OR would
> I have to go out the Spdif's for digital xfers?
>
> THANKS!!!!!!!!
> b
>
>
>
>
>
>
>
> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
>>either/or.Have you read the setup manual for the card?
>>Set it for the Cubase settings, From memory here...That's how I remember
>
>>initial setting it up, actually, I think there are a few presets setup for
>
>>the card in the software.
>>--
>>Martin Harrington
>>www.lendanear-sound.com
>>
>>"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>>>
>>> Yes different sound card.
>>> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
>>> EMU is my new EMU0404 sound card.
>>> In the VST Connections / outputs tab......it only gives
>>> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
>>> In the Input tab it lets me select all 8 of the inputs if I want.(that
> are
>>> associated with this card).
>>>
>>>
>>>
>>>
>>>
>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>Maybe the config details of your friends computer are different to
>>>>yours.
>>>>Does he have a different sound card?
>>>>If so, the setup info that is transferred to your computer will not
>>>>match
>>>
>>>>yours.
>>>>Have you selected your soundcard in the VST connections window?
>>>>--
>>>>Martin Harrington
>>>>www.lendanear-sound.com
>>>>
>>>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>>>
>>>>> Ok guys..I have these saved project files I am trying to open and
>>>>> listen
>>>
>>>>> to,
>>>>> but I can't hear squat.
>>>>> I can create a new project and import an audio file and everything is
>>>
>>>>> fine.
>>>>> I can hear it thru my card.
>>>>> But I open one of the saved project files and I can see the individual
>>>
>>>>> channel
>>>>> meters LEDs moving, but nothing on the stereo out meters. I have tried
>>>
>>>>> configuring
>>>>> the VST Connections
>>>>> and they look identical to the newly created project, but no go.
>>>>> These were created on someone elses computer so I am thinking it is
> a
>>>
>>>>> config
>>>>> issue, but I cant figure it out. All the tracks and plugs loaded up
>>>>> nicely,
>>>>> but no SOUND thru the stereo outs.
>>>>> ANY IDEAS?
>>>>> Arg!!
>>>>>
>>>>> Thanks
>>>>> b
>>>>
>>>>
>>>
>>
>>
>
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69764 is a reply to message #69759] |
Wed, 28 June 2006 19:53 |
Martin Harrington
Messages: 560
Registered: September 2005
|
Senior Member |
|
|
I'm in the studio now, and am looking at the session presets, and there are
presets for Cubasis, (same as Cubase) and Wavelab at various sample rate
settings.
Good Luck
Martin
"Martin Harrington" <lendan@bigpond.net.au> wrote in message
news:44a313aa$1@linux...
> Not sure about the lightpipe/optical outs into ADAT, (I'd say they were
> different), but I'd be going out SPdif.
> As to the Cubase setting...going from memory over 2 years ago..not sure.
> I thought there was various software settings though.
> I'll check when I get to the studio later today.
> --
> Martin Harrington
> www.lendanear-sound.com
>
> "Brandon" <a@a.com> wrote in message news:44a2b7b4$1@linux...
>>
>>
>> Hmm...I read all the documentation and I don't recal a preset for
>> Softwares
>> such as Cubase. I will check again though.
>> Thanks.
>> Also, is it possible to send from Cubase with the 0404 by way of
>> lightpipe
>> into the ADAT module on the MEC or are these different formats? OR would
>> I have to go out the Spdif's for digital xfers?
>>
>> THANKS!!!!!!!!
>> b
>>
>>
>>
>>
>>
>>
>>
>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
>>>either/or.Have you read the setup manual for the card?
>>>Set it for the Cubase settings, From memory here...That's how I remember
>>
>>>initial setting it up, actually, I think there are a few presets setup
>>>for
>>
>>>the card in the software.
>>>--
>>>Martin Harrington
>>>www.lendanear-sound.com
>>>
>>>"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>>>>
>>>> Yes different sound card.
>>>> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
>>>> EMU is my new EMU0404 sound card.
>>>> In the VST Connections / outputs tab......it only gives
>>>> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
>>>> In the Input tab it lets me select all 8 of the inputs if I want.(that
>> are
>>>> associated with this card).
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>>Maybe the config details of your friends computer are different to
>>>>>yours.
>>>>>Does he have a different sound card?
>>>>>If so, the setup info that is transferred to your computer will not
>>>>>match
>>>>
>>>>>yours.
>>>>>Have you selected your soundcard in the VST connections window?
>>>>>--
>>>>>Martin Harrington
>>>>>www.lendanear-sound.com
>>>>>
>>>>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>>>>
>>>>>> Ok guys..I have these saved project files I am trying to open and
>>>>>> listen
>>>>
>>>>>> to,
>>>>>> but I can't hear squat.
>>>>>> I can create a new project and import an audio file and everything is
>>>>
>>>>>> fine.
>>>>>> I can hear it thru my card.
>>>>>> But I open one of the saved project files and I can see the
>>>>>> individual
>>>>
>>>>>> channel
>>>>>> meters LEDs moving, but nothing on the stereo out meters. I have
>>>>>> tried
>>>>
>>>>>> configuring
>>>>>> the VST Connections
>>>>>> and they look identical to the newly created project, but no go.
>>>>>> These were created on someone elses computer so I am thinking it is
>> a
>>>>
>>>>>> config
>>>>>> issue, but I cant figure it out. All the tracks and plugs loaded up
>>>>>> nicely,
>>>>>> but no SOUND thru the stereo outs.
>>>>>> ANY IDEAS?
>>>>>> Arg!!
>>>>>>
>>>>>> Thanks
>>>>>> b
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69768 is a reply to message #69764] |
Thu, 29 June 2006 06:57 |
brandon[5]
Messages: 1
Registered: June 2006
|
Junior Member |
|
|
Is that located in the Patchmix software or whatever it is called? Or is there
a different config gui?
Thanks,
b
"Martin Harrington" <lendan@bigpond.net.au> wrote:
>I'm in the studio now, and am looking at the session presets, and there
are
>presets for Cubasis, (same as Cubase) and Wavelab at various sample rate
>settings.
>Good Luck
>Martin
>
>"Martin Harrington" <lendan@bigpond.net.au> wrote in message
>news:44a313aa$1@linux...
>> Not sure about the lightpipe/optical outs into ADAT, (I'd say they were
>> different), but I'd be going out SPdif.
>> As to the Cubase setting...going from memory over 2 years ago..not sure.
>> I thought there was various software settings though.
>> I'll check when I get to the studio later today.
>> --
>> Martin Harrington
>> www.lendanear-sound.com
>>
>> "Brandon" <a@a.com> wrote in message news:44a2b7b4$1@linux...
>>>
>>>
>>> Hmm...I read all the documentation and I don't recal a preset for
>>> Softwares
>>> such as Cubase. I will check again though.
>>> Thanks.
>>> Also, is it possible to send from Cubase with the 0404 by way of
>>> lightpipe
>>> into the ADAT module on the MEC or are these different formats? OR would
>>> I have to go out the Spdif's for digital xfers?
>>>
>>> THANKS!!!!!!!!
>>> b
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
>>>>either/or.Have you read the setup manual for the card?
>>>>Set it for the Cubase settings, From memory here...That's how I remember
>>>
>>>>initial setting it up, actually, I think there are a few presets setup
>>>>for
>>>
>>>>the card in the software.
>>>>--
>>>>Martin Harrington
>>>>www.lendanear-sound.com
>>>>
>>>>"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>>>>>
>>>>> Yes different sound card.
>>>>> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
>>>>> EMU is my new EMU0404 sound card.
>>>>> In the VST Connections / outputs tab......it only gives
>>>>> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
>>>>> In the Input tab it lets me select all 8 of the inputs if I want.(that
>>> are
>>>>> associated with this card).
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>>>Maybe the config details of your friends computer are different to
>>>>>>yours.
>>>>>>Does he have a different sound card?
>>>>>>If so, the setup info that is transferred to your computer will not
>>>>>>match
>>>>>
>>>>>>yours.
>>>>>>Have you selected your soundcard in the VST connections window?
>>>>>>--
>>>>>>Martin Harrington
>>>>>>www.lendanear-sound.com
>>>>>>
>>>>>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>>>>>
>>>>>>> Ok guys..I have these saved project files I am trying to open and
>>>>>>> listen
>>>>>
>>>>>>> to,
>>>>>>> but I can't hear squat.
>>>>>>> I can create a new project and import an audio file and everything
is
>>>>>
>>>>>>> fine.
>>>>>>> I can hear it thru my card.
>>>>>>> But I open one of the saved project files and I can see the
>>>>>>> individual
>>>>>
>>>>>>> channel
>>>>>>> meters LEDs moving, but nothing on the stereo out meters. I have
>>>>>>> tried
>>>>>
>>>>>>> configuring
>>>>>>> the VST Connections
>>>>>>> and they look identical to the newly created project, but no go.
>>>>>>> These were created on someone elses computer so I am thinking it
is
>>> a
>>>>>
>>>>>>> config
>>>>>>> issue, but I cant figure it out. All the tracks and plugs loaded
up
>>>>>>> nicely,
>>>>>>> but no SOUND thru the stereo outs.
>>>>>>> ANY IDEAS?
>>>>>>> Arg!!
>>>>>>>
>>>>>>> Thanks
>>>>>>> b
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69786 is a reply to message #69768] |
Thu, 29 June 2006 21:22 |
Martin Harrington
Messages: 560
Registered: September 2005
|
Senior Member |
|
|
It's in the Patchmix Software under Open session.
Martin
"brandon" <a@2.COM> wrote in message news:44a3dc52$1@linux...
>
> Is that located in the Patchmix software or whatever it is called? Or is
> there
> a different config gui?
>
> Thanks,
> b
>
>
>
>
>
>
>
>
> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>I'm in the studio now, and am looking at the session presets, and there
> are
>>presets for Cubasis, (same as Cubase) and Wavelab at various sample rate
>
>>settings.
>>Good Luck
>>Martin
>>
>>"Martin Harrington" <lendan@bigpond.net.au> wrote in message
>>news:44a313aa$1@linux...
>>> Not sure about the lightpipe/optical outs into ADAT, (I'd say they were
>
>>> different), but I'd be going out SPdif.
>>> As to the Cubase setting...going from memory over 2 years ago..not sure.
>>> I thought there was various software settings though.
>>> I'll check when I get to the studio later today.
>>> --
>>> Martin Harrington
>>> www.lendanear-sound.com
>>>
>>> "Brandon" <a@a.com> wrote in message news:44a2b7b4$1@linux...
>>>>
>>>>
>>>> Hmm...I read all the documentation and I don't recal a preset for
>>>> Softwares
>>>> such as Cubase. I will check again though.
>>>> Thanks.
>>>> Also, is it possible to send from Cubase with the 0404 by way of
>>>> lightpipe
>>>> into the ADAT module on the MEC or are these different formats? OR
>>>> would
>>>> I have to go out the Spdif's for digital xfers?
>>>>
>>>> THANKS!!!!!!!!
>>>> b
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>>Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
>>>>>either/or.Have you read the setup manual for the card?
>>>>>Set it for the Cubase settings, From memory here...That's how I
>>>>>remember
>>>>
>>>>>initial setting it up, actually, I think there are a few presets setup
>
>>>>>for
>>>>
>>>>>the card in the software.
>>>>>--
>>>>>Martin Harrington
>>>>>www.lendanear-sound.com
>>>>>
>>>>>"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>>>>>>
>>>>>> Yes different sound card.
>>>>>> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
>>>>>> EMU is my new EMU0404 sound card.
>>>>>> In the VST Connections / outputs tab......it only gives
>>>>>> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
>>>>>> In the Input tab it lets me select all 8 of the inputs if I
>>>>>> want.(that
>>>> are
>>>>>> associated with this card).
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>>>>Maybe the config details of your friends computer are different to
>
>>>>>>>yours.
>>>>>>>Does he have a different sound card?
>>>>>>>If so, the setup info that is transferred to your computer will not
>
>>>>>>>match
>>>>>>
>>>>>>>yours.
>>>>>>>Have you selected your soundcard in the VST connections window?
>>>>>>>--
>>>>>>>Martin Harrington
>>>>>>>www.lendanear-sound.com
>>>>>>>
>>>>>>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>>>>>>
>>>>>>>> Ok guys..I have these saved project files I am trying to open and
>
>>>>>>>> listen
>>>>>>
>>>>>>>> to,
>>>>>>>> but I can't hear squat.
>>>>>>>> I can create a new project and import an audio file and everything
> is
>>>>>>
>>>>>>>> fine.
>>>>>>>> I can hear it thru my card.
>>>>>>>> But I open one of the saved project files and I can see the
>>>>>>>> individual
>>>>>>
>>>>>>>> channel
>>>>>>>> meters LEDs moving, but nothing on the stereo out meters. I have
>
>>>>>>>> tried
>>>>>>
>>>>>>>> configuring
>>>>>>>> the VST Connections
>>>>>>>> and they look identical to the newly created project, but no go.
>>>>>>>> These were created on someone elses computer so I am thinking it
> is
>>>> a
>>>>>>
>>>>>>>> config
>>>>>>>> issue, but I cant figure it out. All the tracks and plugs loaded
> up
>>>>>>>> nicely,
>>>>>>>> but no SOUND thru the stereo outs.
>>>>>>>> ANY IDEAS?
>>>>>>>> Arg!!
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> b
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
|
|
|
|
| Re: Cubase SX HELP PLEASE [message #69800 is a reply to message #69786] |
Fri, 30 June 2006 05:12 |
brandon[2]
Messages: 380
Registered: June 2006
|
Senior Member |
|
|
I was trying to send out the SPDIF 0404 to the SPDIF on the MEC and I got
no signal in PARIS. I didn't try to sync lock the signal and I didn't make
sure everything was on the same sample rate, but it should be. Would the
absence of a sync clock cause the signal not to be recognized? Or should
I have heard something at least with pops and clicks?
In the PatchMix Output config I selected MON for the SPDIF.
I was registering on the Stereo LED output meter of the PatchMIx software.
But when I routed from the DL and RL on the MEC to a pair of channels and
record enabled them I got nothing for sound.
Does this sound right.
I was using a brand new Monster SDPIF RCA cable.
Thanks
"Martin Harrington" <lendan@bigpond.net.au> wrote:
>It's in the Patchmix Software under Open session.
>Martin
>"brandon" <a@2.COM> wrote in message news:44a3dc52$1@linux...
>>
>> Is that located in the Patchmix software or whatever it is called? Or
is
>> there
>> a different config gui?
>>
>> Thanks,
>> b
>>
>>
>>
>>
>>
>>
>>
>>
>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>I'm in the studio now, and am looking at the session presets, and there
>> are
>>>presets for Cubasis, (same as Cubase) and Wavelab at various sample rate
>>
>>>settings.
>>>Good Luck
>>>Martin
>>>
>>>"Martin Harrington" <lendan@bigpond.net.au> wrote in message
>>>news:44a313aa$1@linux...
>>>> Not sure about the lightpipe/optical outs into ADAT, (I'd say they were
>>
>>>> different), but I'd be going out SPdif.
>>>> As to the Cubase setting...going from memory over 2 years ago..not sure.
>>>> I thought there was various software settings though.
>>>> I'll check when I get to the studio later today.
>>>> --
>>>> Martin Harrington
>>>> www.lendanear-sound.com
>>>>
>>>> "Brandon" <a@a.com> wrote in message news:44a2b7b4$1@linux...
>>>>>
>>>>>
>>>>> Hmm...I read all the documentation and I don't recal a preset for
>>>>> Softwares
>>>>> such as Cubase. I will check again though.
>>>>> Thanks.
>>>>> Also, is it possible to send from Cubase with the 0404 by way of
>>>>> lightpipe
>>>>> into the ADAT module on the MEC or are these different formats? OR
>>>>> would
>>>>> I have to go out the Spdif's for digital xfers?
>>>>>
>>>>> THANKS!!!!!!!!
>>>>> b
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>>>Not sure there are 8 inputs...2 analogue, (2 Spdif and 2 optical)
>>>>>>either/or.Have you read the setup manual for the card?
>>>>>>Set it for the Cubase settings, From memory here...That's how I
>>>>>>remember
>>>>>
>>>>>>initial setting it up, actually, I think there are a few presets setup
>>
>>>>>>for
>>>>>
>>>>>>the card in the software.
>>>>>>--
>>>>>>Martin Harrington
>>>>>>www.lendanear-sound.com
>>>>>>
>>>>>>"brandon" <a@a.com> wrote in message news:44a1cfc0$1@linux...
>>>>>>>
>>>>>>> Yes different sound card.
>>>>>>> I selected the EMU ASIO driver in the Device Setup/VST Multitrack.
>>>>>>> EMU is my new EMU0404 sound card.
>>>>>>> In the VST Connections / outputs tab......it only gives
>>>>>>> me two options for output. ASIO 1 OUT & ASIO 2 OUT.
>>>>>>> In the Input tab it lets me select all 8 of the inputs if I
>>>>>>> want.(that
>>>>> are
>>>>>>> associated with this card).
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>>>>>>Maybe the config details of your friends computer are different to
>>
>>>>>>>>yours.
>>>>>>>>Does he have a different sound card?
>>>>>>>>If so, the setup info that is transferred to your computer will not
>>
>>>>>>>>match
>>>>>>>
>>>>>>>>yours.
>>>>>>>>Have you selected your soundcard in the VST connections window?
>>>>>>>>--
>>>>>>>>Martin Harrington
>>>>>>>>www.lendanear-sound.com
>>>>>>>>
>>>>>>>>"Brandon" <a@a.com> wrote in message news:44a1cb29$1@linux...
>>>>>>>>>
>>>>>>>>> Ok guys..I have these saved project files I am trying to open and
>>
>>>>>>>>> listen
>>>>>>>
>>>>>>>>> to,
>>>>>>>>> but I can't hear squat.
>>>>>>>>> I can create a new project and import an audio file and everything
>> is
>>>>>>>
>>>>>>>>> fine.
>>>>>>>>> I can hear it thru my card.
>>>>>>>>> But I open one of the saved project files and I can see the
>>>>>>>>> individual
>>>>>>>
>>>>>>>>> channel
>>>>>>>>> meters LEDs moving, but nothing on the stereo out meters. I have
>>
>>>>>>>>> tried
>>>>>>>
>>>>>>>>> configuring
>>>>>>>>> the VST Connections
>>>>>>>>> and they look identical to the newly created project, but no go.
>>>>>>>>> These were created on someone elses computer so I am thinking it
>> is
>>>>> a
>>>>>>>
>>>>>>>>> config
>>>>>>>>> issue, but I cant figure it out. All the tracks and plugs loaded
>> up
>>>>>>>>> nicely,
>>>>>>>>> but no SOUND thru the stereo outs.
>>>>>>>>> ANY IDEAS?
>>>>>>>>> Arg!!
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>> b
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
|
|
|
|
Goto Forum:
Current Time: Fri Nov 29 20:01:28 PST 2024
Total time taken to generate the page: 0.01239 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
