The PARIS Forums: PARIS: Main » Record Enable from C16 in 3.0

Home » The PARIS Forums » PARIS: Main » Record Enable from C16 in 3.0

Show: Today's Messages :: Polls :: Message Navigator

Record Enable from C16 in 3.0 [message #110116]

Sat, 11 June 2022 08:12

Rich.Kelley

Messages: 98
Registered: August 2009

Member

Just ran into the weirdest problem with using the record enable button on the C16.

I have a 5 card, 3 C16 rig and running 3.0. I realized recently that I can only enable record from the 2 C16s that are plugged into the first two EDS cards. The third C16, plugged into any of the other EDS cards, works completely normally (as far as I can tell) except that the record enable button will not arm a track. The lights correctly show when a track is armed for recording, it's just the button that doesn't work.

Fast forward through several hours of swapping C16s, CAT5 cables, EDS cards, EDS card positions, jumper cables on EDS - nothing fixes it. Finally I load PARIS 2.2 and it everything works as it should.

Is there some issue 3.0 and multiple C16s?

Report message to a moderator

Re: Record Enable from C16 in 3.0 [message #110128 is a reply to message #110116]

Mon, 01 August 2022 22:33

Rich.Kelley

Messages: 98
Registered: August 2009

Member

Bumping.

Report message to a moderator

Re: Record Enable from C16 in 3.0 [message #110129 is a reply to message #110128]

Wed, 03 August 2022 05:55

Kim W.

Messages: 189
Registered: January 2010
Location: Australia

Senior Member

I know this is a stupid question, Rich. (Given you know more about Paris than a lot of folk). But, have you checked that all the c-16's are set to "classic mode", rather than "pro mode"? (In the config settings).
Cheers.

Report message to a moderator

Re: Record Enable from C16 in 3.0 [message #110130 is a reply to message #110129]

Fri, 05 August 2022 16:10

Rich.Kelley

Messages: 98
Registered: August 2009

Member

I don't think it's a stupid question. I didn't even know that was a thing you coulf set. I'm on vacation right now, but when I get back home I will look into that.

Thanks for the tip.

Ricb

Report message to a moderator

Re: Record Enable from C16 in 3.0 [message #110135 is a reply to message #110129]

Tue, 30 August 2022 07:38

Rich.Kelley

Messages: 98
Registered: August 2009

Member

... and give Kim the prize!! Some C16s set to "Pro" mode was exactly the problem. I have no idea how it got that way, but I set them all back, restarted, and record enable works again.

Thanks a bunch, Kim.

Report message to a moderator

Re: Record Enable from C16 in 3.0 [message #110136 is a reply to message #110135]

Thu, 08 September 2022 02:16

Kim W.

Messages: 189
Registered: January 2010
Location: Australia

Senior Member

Glad to be of service, Sir.

Report message to a moderator

Previous Topic:	New PARIS Mix
Next Topic:	Brian Tankersley's tutorial video on Vimeo.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 01 05:55:56 PDT 2025

Total time taken to generate the page: 0.02229 seconds