|
|
|
|
| Re: Trivial BS you guys probably don't care about.....but........... [message #80145 is a reply to message #80141] |
Thu, 15 February 2007 21:37   |
![Deej [4] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "Deej [4] is currently offline")
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
hehehe!!!!!!! thought you'd never ask..........OK then.........first of all,
but 2 x Behringer SRC 2496 boxes from MF for $129.00 each...then
digital out of DAW at 88.2 to digital in of #1 Behringer SRC 2496>
downsample to 44.1 in #1 SRC 2496 and route 44.1 signal to digital in of
outboard processor, send digital out of processor at 44.1 to digital input
of #2 Behringer SRC 2496 and upsample signal to 88.2, then return upsampled
88.2 signal to DAW running at 88.2.
I have the Behringer boxes here. I haven't tried it yet, but according to
what the F'in'M says, this should work. I'll try it after I get a little
further along in patching together my new world of native
insanity......which now includes two Behringer products......which I'll
probably regret, but the only other box that does this is the RME ADI 8-DD
or the RME ADI 8-192, those cost $800 or 1400.00 each respectively and you
have to have two of them. If the Behringers die, I hope it's before 45
days. I have open rack spaces above and below them in case they catch on
fire.
If this works, I'll bet I could buy 6 more of these at a discount and I
would have all of my old digital signal processors integrated with 88.2
projects for under a grand. Now the question is, WTF would I want to do this
when patching analog would probably sound as good or better once all of the
SRC stuff was said and done?
Well, I just had to see if I could pull it off and since my Yardstick
doesn't have AD/DA converters, the Behringer boxes do and will allow me to
patch
it into higher rez projects using their AD/DA's which are surprisingly good
when they work.which is why I got the Behringers in the first place..
;o)
"Neil" <IUOIU@OIU.com> wrote in message news:45d535b2$1@linux...
>
> and that way is........?
>
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>I just figured out a relatively (as in , less $$$ than other ways I've
>>found) to digitally integrate an older outboard FX box with digital I/O
> that
>>will only work at 48kHz max sample rates with a DAW running at 88.2 or
>>96K.
>>
>>
>>
>
|
|
|
|
| Re: Trivial BS you guys probably don't care about.....but........... [message #80146 is a reply to message #80145] |
Thu, 15 February 2007 23:54 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
MORE Behringer?
When is your birthday? Because Christmas is too long to wait
for me to send you a fire extinguisher.
:)
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>hehehe!!!!!!! thought you'd never ask..........OK then.........first of
all,
>but 2 x Behringer SRC 2496 boxes from MF for $129.00 each...then
>
>digital out of DAW at 88.2 to digital in of #1 Behringer SRC 2496>
>downsample to 44.1 in #1 SRC 2496 and route 44.1 signal to digital in of
>outboard processor, send digital out of processor at 44.1 to digital input
>of #2 Behringer SRC 2496 and upsample signal to 88.2, then return upsampled
>88.2 signal to DAW running at 88.2.
>
>I have the Behringer boxes here. I haven't tried it yet, but according to
>what the F'in'M says, this should work. I'll try it after I get a little
>further along in patching together my new world of native
>insanity......which now includes two Behringer products......which I'll
>probably regret, but the only other box that does this is the RME ADI 8-DD
>or the RME ADI 8-192, those cost $800 or 1400.00 each respectively and you
>have to have two of them. If the Behringers die, I hope it's before 45
>days. I have open rack spaces above and below them in case they catch on
>fire.
>
>If this works, I'll bet I could buy 6 more of these at a discount and I
>would have all of my old digital signal processors integrated with 88.2
>projects for under a grand. Now the question is, WTF would I want to do
this
>when patching analog would probably sound as good or better once all of
the
>SRC stuff was said and done?
>
>Well, I just had to see if I could pull it off and since my Yardstick
>doesn't have AD/DA converters, the Behringer boxes do and will allow me
to
>patch
>it into higher rez projects using their AD/DA's which are surprisingly good
>when they work.which is why I got the Behringers in the first place..
>
>;o)
>
>
>"Neil" <IUOIU@OIU.com> wrote in message news:45d535b2$1@linux...
>>
>> and that way is........?
>>
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>I just figured out a relatively (as in , less $$$ than other ways I've
>>>found) to digitally integrate an older outboard FX box with digital I/O
>> that
>>>will only work at 48kHz max sample rates with a DAW running at 88.2 or
>>>96K.
>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: Trivial BS you guys probably don't care about.....but........... [message #80154 is a reply to message #80146] |
Fri, 16 February 2007 01:48 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
you can always send him an empty one 4/01/07...
On 16 Feb 2007 17:54:01 +1000, "Neil" <OIUOIU@OIU.com> wrote:
>
>MORE Behringer?
>
>When is your birthday? Because Christmas is too long to wait
>for me to send you a fire extinguisher.
>
>:)
>
>
>"DJ" <www.aarrrrggghhh!!!.com> wrote:
>>hehehe!!!!!!! thought you'd never ask..........OK then.........first of
>all,
>>but 2 x Behringer SRC 2496 boxes from MF for $129.00 each...then
>>
>>digital out of DAW at 88.2 to digital in of #1 Behringer SRC 2496>
>>downsample to 44.1 in #1 SRC 2496 and route 44.1 signal to digital in of
>
>>outboard processor, send digital out of processor at 44.1 to digital input
>
>>of #2 Behringer SRC 2496 and upsample signal to 88.2, then return upsampled
>
>>88.2 signal to DAW running at 88.2.
>>
>>I have the Behringer boxes here. I haven't tried it yet, but according to
>
>>what the F'in'M says, this should work. I'll try it after I get a little
>
>>further along in patching together my new world of native
>>insanity......which now includes two Behringer products......which I'll
>
>>probably regret, but the only other box that does this is the RME ADI 8-DD
>
>>or the RME ADI 8-192, those cost $800 or 1400.00 each respectively and you
>
>>have to have two of them. If the Behringers die, I hope it's before 45
>
>>days. I have open rack spaces above and below them in case they catch on
>
>>fire.
>>
>>If this works, I'll bet I could buy 6 more of these at a discount and I
>
>>would have all of my old digital signal processors integrated with 88.2
>
>>projects for under a grand. Now the question is, WTF would I want to do
>this
>>when patching analog would probably sound as good or better once all of
>the
>>SRC stuff was said and done?
>>
>>Well, I just had to see if I could pull it off and since my Yardstick
>>doesn't have AD/DA converters, the Behringer boxes do and will allow me
>to
>>patch
>>it into higher rez projects using their AD/DA's which are surprisingly good
>
>>when they work.which is why I got the Behringers in the first place..
>>
>>;o)
>>
>>
>>"Neil" <IUOIU@OIU.com> wrote in message news:45d535b2$1@linux...
>>>
>>> and that way is........?
>>>
>>>
>>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>>I just figured out a relatively (as in , less $$$ than other ways I've
>>>>found) to digitally integrate an older outboard FX box with digital I/O
>>> that
>>>>will only work at 48kHz max sample rates with a DAW running at 88.2 or
>
>>>>96K.
>>>>
>>>>
>>>>
>>>
>>
>>
|
|
|
|
|
|
|
|
| Re: Trivial BS you guys probably don't care about.....but........... [message #80188 is a reply to message #80162] |
Fri, 16 February 2007 17:53 |
gene lennon
Messages: 565
Registered: July 2006
|
Senior Member |
|
|
LOL
Almost every album I’ve ever loved was mixed analog, therefore all I/O connections
to effects were analog…and I never had a patch cord catch on fire.
Gene
"chuck duffy" <c@c.com> wrote:
>
>I figured out the analog way, it wasn't hard, although the cables cost almost
>10 dollars each to make :-)
>
>Chuck
>"DJ" <www.aarrrrggghhh!!!.com> wrote:
>>I just figured out a relatively (as in , less $$$ than other ways I've
>>found) to digitally integrate an older outboard FX box with digital I/O
>that
>>will only work at 48kHz max sample rates with a DAW running at 88.2 or
96K.
>>
>>
>>
>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
