|
|
| Re: Error in initializing Paris Engine? [message #94205 is a reply to message #94204] |
Mon, 31 December 2007 08:34   |
|
|
Hi Zan,
Will Paris boot if you take all the plugins out of the VST folder? Have
you tried removing all Paris files and re-installing it from the original
disk? I do that periodically and find that things run better. Could it
be a hardware problem? How many EDS cards do you have? If you have two
try removing one. I'm not sure if that's the same message you get when a
MEC isn't turned on. You might try re-seating all your connectors and cables.
Good luck!
Gantt
"tonehouse" <zmcleod@comcast.net> wrote:
>Has anybody ever seen this Error message: Error in initializing
>ParisEngine. There are not enough resources available." This is a real
>puzzle for me. I have been using Paris for 8 years,and have never heard
of
>this .I cannot boot Paris at all...it seems to be related to plug-ins,but
>not sure...
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
|
|
| Re: Error in initializing Paris Engine? [message #94220 is a reply to message #94213] |
Mon, 31 December 2007 13:26 |
tonehouse
Messages: 184
Registered: July 2006
|
Senior Member |
|
|
Thanks John..it hasn't said 7/7 yet..but I will check those things out.The
weird thing is it was working fine,I didn't change anythingor install
anything,,turned it off,went away for 10 days,turned it on ,then the error
message....
"John" <no@no.com> wrote in message news:477945e2$1@linux...
>
> Error Initializing Paris Engine: Error Code 7/7 error 7/7
means
> that paris can't see the EDS card
>
> (1) The EDS Card is loose
> -or-
> (2) IRQ resource conflict
>
> The MEC will flash until Paris has booted up, so that is normal.
> You're turning on the MEC first right and giving it 5 seconds before
turning
> on the PC.
>
> www.kfocus.com/paris
>
>
> "Gantt Kushner" <ganttmann@comcast.net> wrote:
> >
> >Hi Zan,
> >
> >Will Paris boot if you take all the plugins out of the VST folder? Have
> >you tried removing all Paris files and re-installing it from the original
> >disk? I do that periodically and find that things run better. Could it
> >be a hardware problem? How many EDS cards do you have? If you have two
> >try removing one. I'm not sure if that's the same message you get when
> a
> >MEC isn't turned on. You might try re-seating all your connectors and
cables.
> >
> >Good luck!
> >
> >Gantt
> >
> >"tonehouse" <zmcleod@comcast.net> wrote:
> >>Has anybody ever seen this Error message: Error in initializing
> >>ParisEngine. There are not enough resources available." This is a real
> >>puzzle for me. I have been using Paris for 8 years,and have never heard
> >of
> >>this .I cannot boot Paris at all...it seems to be related to
plug-ins,but
> >>not sure...
> >>
> >>
> >
>
|
|
|
|
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
