The PARIS Forums


Home » The PARIS Forums » PARIS: Main » virtua via case? what are u parisians using for 4 eds 1000s in a virtua via (psu wattage? virtua via case 4x 1000 eds cards )
virtua via case? what are u parisians using for 4 eds 1000s in a virtua via [message #105837] Thu, 18 November 2010 01:36 Go to next message
rokuez is currently offline  rokuez   UNITED STATES
Messages: 63
Registered: March 2009
Location: West LA
Member
I just received my virtua via

ExpressCard 34 => 4 x PCI Expansion ATX Kit
Options:  Connector: ExpressCard 34 + PCIe

and it is very small . have mobos shrunk recently? or is this just a small pcb board that will fit in the standard computer tower case?

the virtua via board is 6.5 inches by 5.5 inches. which isn't mini atx http://en.wikipedia.org/wiki/Mini_ATX according to wiki is it micro atx? i'm unsure because micro is 6.75 by 6.75 inches

i have four eds 1000 cards, paris software , c16, mec, 2 8 ins

I just have to put together the rig listed over at

http://kerrygalloway.com/ParisForums/index.php?t=msg&th= 14979&start=0& by mr hungaristan

i'm a bit on the fence on what kind of case to get for the virtua via and the four eds cards.

I want to have a psu with 500 watts. should i get a psu with more watts for the 4 eds cards? any brand recommendations?


for the pc case i was planning on going with

http://www.coolerguys.com/llpca71.html

I may just get two of these one for the pc and the other for the eds cards.

What are you parisians using for your virtua via case?

http://www.silentpcreview.com/article75-page5.html great website on cases





E-mu Emulator User Forum

www.eiiiforum.com

[Updated on: Thu, 18 November 2010 01:39]

Report message to a moderator

Re: virtua via case? what are u parisians using for 4 eds 1000s in a virtua via [message #105839 is a reply to message #105837] Thu, 18 November 2010 19:13 Go to previous message
thesandbox1 is currently offline  thesandbox1   UNITED STATES
Messages: 167
Registered: July 2009
Location: Carmel, IN
Senior Member
Not sure what case but as far as PSU goes 500w should be plenty if it is just for the cards. I know they use quite a bit in comparison but you are also not powering everything else that is a normal comp. I have a 7 slot Magma chassis with 4 cards spaced out in it with a 350w silent PSU and have had no issues.

Previous Topic: iPhone version of forums?
Next Topic: Digital noise
Goto Forum:
  


Current Time: Sat Dec 28 13:02:39 PST 2024

Total time taken to generate the page: 0.01209 seconds