The PARIS Forums


Home » The PARIS Forums » PARIS: Main » 3 Cards?
3 Cards? [message #76983] Wed, 13 December 2006 06:56 Go to next message
cujo is currently offline  cujo
Messages: 285
Registered: July 2005
Senior Member
I currently have 2 EDS, someone just traded me an MEC and EDS and a C16 for
some work..Well, there was more to the trade no matter.

What Do I need to hook it all up..I have a LA Audio WC generator..does the
3rd EDS have to be hooked to an inerface at all I assume it does. do need
the little ribbon cable..any place sell em?

Also, I remember this EDS card may have issues..is there a danger in putting
it in if it is a bad card or will it just not work?

Thanks all
C
Re: 3 Cards? [message #76984 is a reply to message #76983] Wed, 13 December 2006 07:03 Go to previous messageGo to next message
Phil Aiken is currently offline  Phil Aiken
Messages: 62
Registered: February 2008
Member
You just need the same little cables that your other 2 cards have. I don't
believe you need an interface hooked up, as long as the card with no interface
is not tagged as your primary card within Paris. I believe it can get word
clock passed to it internally from one of the other cards, and that is what
one of the cables is for. Someone correct this if I am wrong, please..

******************************************************
****Make sure your power supply is up to the task.****
******************************************************

Can't answer the bad card question.....


"Cujo" <chris@nospamapplemanstudio.com> wrote:
>
>
>I currently have 2 EDS, someone just traded me an MEC and EDS and a C16
for
>some work..Well, there was more to the trade no matter.
>
>What Do I need to hook it all up..I have a LA Audio WC generator..does the
>3rd EDS have to be hooked to an inerface at all I assume it does. do need
>the little ribbon cable..any place sell em?
>
>Also, I remember this EDS card may have issues..is there a danger in putting
>it in if it is a bad card or will it just not work?
>
>Thanks all
>C
Re: 3 Cards? [message #76985 is a reply to message #76984] Wed, 13 December 2006 07:18 Go to previous messageGo to next message
cujo is currently offline  cujo
Messages: 285
Registered: July 2005
Senior Member
Thanks! How are you Phil?



"Phil Aiken" <asdfasdfas@asdfafdasfd.asd> wrote:
>
>You just need the same little cables that your other 2 cards have. I don't
>believe you need an interface hooked up, as long as the card with no interface
>is not tagged as your primary card within Paris. I believe it can get word
>clock passed to it internally from one of the other cards, and that is what
>one of the cables is for. Someone correct this if I am wrong, please..
>
>******************************************************
>****Make sure your power supply is up to the task.****
>******************************************************
>
>Can't answer the bad card question.....
>
>
>"Cujo" <chris@nospamapplemanstudio.com> wrote:
>>
>>
>>I currently have 2 EDS, someone just traded me an MEC and EDS and a C16
>for
>>some work..Well, there was more to the trade no matter.
>>
>>What Do I need to hook it all up..I have a LA Audio WC generator..does
the
>>3rd EDS have to be hooked to an inerface at all I assume it does. do need
>>the little ribbon cable..any place sell em?
>>
>>Also, I remember this EDS card may have issues..is there a danger in putting
>>it in if it is a bad card or will it just not work?
>>
>>Thanks all
>>C
>
Re: 3 Cards? [message #76989 is a reply to message #76984] Wed, 13 December 2006 07:37 Go to previous messageGo to next message
Sound Dog is currently offline  Sound Dog   AUSTRALIA
Messages: 44
Registered: October 2005
Member
Hi Cujo,

My understanding is that you do need external wordclock to run more than 2
MECs / 442s. I have 3 EDS cards in my setup running 2 MECs, with nothing
attached to the 3rd EDS.

Also, make sure you've got adequate ventilation in your computer - these
babies get hot.

I got a set of EDS cables thru http://www.eastcoastmusic.com a couple of
years ago, from Morgan Pettinato. Maybe they can still supply.

Cheers,

Stewart.



Phil Aiken wrote in message <45800842$1@linux>...
>
>You just need the same little cables that your other 2 cards have. I don't
>believe you need an interface hooked up, as long as the card with no
interface
>is not tagged as your primary card within Paris. I believe it can get word
>clock passed to it internally from one of the other cards, and that is what
>one of the cables is for. Someone correct this if I am wrong, please..
>
>******************************************************
>****Make sure your power supply is up to the task.****
>******************************************************
>
>Can't answer the bad card question.....
>
>
>"Cujo" <chris@nospamapplemanstudio.com> wrote:
>>
>>
>>I currently have 2 EDS, someone just traded me an MEC and EDS and a C16
>for
>>some work..Well, there was more to the trade no matter.
>>
>>What Do I need to hook it all up..I have a LA Audio WC generator..does the
>>3rd EDS have to be hooked to an inerface at all I assume it does. do need
>>the little ribbon cable..any place sell em?
>>
>>Also, I remember this EDS card may have issues..is there a danger in
putting
>>it in if it is a bad card or will it just not work?
>>
>>Thanks all
>>C
>
Re: 3 Cards? [message #76991 is a reply to message #76989] Wed, 13 December 2006 08:24 Go to previous messageGo to next message
Carl Amburn is currently offline  Carl Amburn   UNITED STATES
Messages: 214
Registered: July 2005
Senior Member
I run 6 EDS cards - with one MEC, and various other interfaces depending on
what I need. Seems like I remember chaining my wordclock output from my "A"
interface to all of the other ones (before I had an external wordclock). You
do need the EDS 10 and 16 pin jumper cables though. You can actually make
these yourself with ribbon cable and connectors - I actually might have some
laying around here.

rock on,
-Carl

"Sound Dog" <dogster@tpg.com.au> wrote in message news:45801b9d$1@linux...
> Hi Cujo,
>
> My understanding is that you do need external wordclock to run more than 2
> MECs / 442s. I have 3 EDS cards in my setup running 2 MECs, with nothing
> attached to the 3rd EDS.
>
> Also, make sure you've got adequate ventilation in your computer - these
> babies get hot.
>
> I got a set of EDS cables thru http://www.eastcoastmusic.com a couple of
> years ago, from Morgan Pettinato. Maybe they can still supply.
>
> Cheers,
>
> Stewart.
>
>
>
> Phil Aiken wrote in message <45800842$1@linux>...
> >
> >You just need the same little cables that your other 2 cards have. I
don't
> >believe you need an interface hooked up, as long as the card with no
> interface
> >is not tagged as your primary card within Paris. I believe it can get
word
> >clock passed to it internally from one of the other cards, and that is
what
> >one of the cables is for. Someone correct this if I am wrong, please..
> >
> >******************************************************
> >****Make sure your power supply is up to the task.****
> >******************************************************
> >
> >Can't answer the bad card question.....
> >
> >
> >"Cujo" <chris@nospamapplemanstudio.com> wrote:
> >>
> >>
> >>I currently have 2 EDS, someone just traded me an MEC and EDS and a C16
> >for
> >>some work..Well, there was more to the trade no matter.
> >>
> >>What Do I need to hook it all up..I have a LA Audio WC generator..does
the
> >>3rd EDS have to be hooked to an inerface at all I assume it does. do
need
> >>the little ribbon cable..any place sell em?
> >>
> >>Also, I remember this EDS card may have issues..is there a danger in
> putting
> >>it in if it is a bad card or will it just not work?
> >>
> >>Thanks all
> >>C
> >
>
>
Re: 3 Cards? [message #77010 is a reply to message #76991] Wed, 13 December 2006 17:02 Go to previous message
cujo is currently offline  cujo
Messages: 285
Registered: July 2005
Senior Member
Oh wonderful! I have a new song that needs a ton of tracks.
SO you think I can just attach the card and rock on?
Shoould I then switch out my 442 for the new MEC to lessen the drain on the
Comps PS?



"Carl Amburn" <carlamburn@hotNOSPAMmail.com> wrote:
>I run 6 EDS cards - with one MEC, and various other interfaces depending
on
>what I need. Seems like I remember chaining my wordclock output from my
"A"
>interface to all of the other ones (before I had an external wordclock).
You
>do need the EDS 10 and 16 pin jumper cables though. You can actually make
>these yourself with ribbon cable and connectors - I actually might have
some
>laying around here.
>
>rock on,
>-Carl
>
>"Sound Dog" <dogster@tpg.com.au> wrote in message news:45801b9d$1@linux...
>> Hi Cujo,
>>
>> My understanding is that you do need external wordclock to run more than
2
>> MECs / 442s. I have 3 EDS cards in my setup running 2 MECs, with nothing
>> attached to the 3rd EDS.
>>
>> Also, make sure you've got adequate ventilation in your computer - these
>> babies get hot.
>>
>> I got a set of EDS cables thru http://www.eastcoastmusic.com a couple
of
>> years ago, from Morgan Pettinato. Maybe they can still supply.
>>
>> Cheers,
>>
>> Stewart.
>>
>>
>>
>> Phil Aiken wrote in message <45800842$1@linux>...
>> >
>> >You just need the same little cables that your other 2 cards have. I
>don't
>> >believe you need an interface hooked up, as long as the card with no
>> interface
>> >is not tagged as your primary card within Paris. I believe it can get
>word
>> >clock passed to it internally from one of the other cards, and that is
>what
>> >one of the cables is for. Someone correct this if I am wrong, please..
>> >
>> >******************************************************
>> >****Make sure your power supply is up to the task.****
>> >******************************************************
>> >
>> >Can't answer the bad card question.....
>> >
>> >
>> >"Cujo" <chris@nospamapplemanstudio.com> wrote:
>> >>
>> >>
>> >>I currently have 2 EDS, someone just traded me an MEC and EDS and a
C16
>> >for
>> >>some work..Well, there was more to the trade no matter.
>> >>
>> >>What Do I need to hook it all up..I have a LA Audio WC generator..does
>the
>> >>3rd EDS have to be hooked to an inerface at all I assume it does. do
>need
>> >>the little ribbon cable..any place sell em?
>> >>
>> >>Also, I remember this EDS card may have issues..is there a danger in
>> putting
>> >>it in if it is a bad card or will it just not work?
>> >>
>> >>Thanks all
>> >>C
>> >
>>
>>
>
>
Previous Topic: OT: the magic of a dog and his master
Next Topic: 8-Channel mic pre with summing for $550
Goto Forum:
  


Current Time: Wed Dec 04 20:37:31 PST 2024

Total time taken to generate the page: 0.01449 seconds