Home » The PARIS Forums » PARIS: Main » So Paris crashes hard for the forth time today...!!
| So Paris crashes hard for the forth time today...!! [message #73603] |
Thu, 05 October 2006 06:51  |
Robert Arsenault
Messages: 49
Registered: September 2006
|
Member |
|
|
Everything is frozen solid, no mouse , keybrd, hard reset needed. Also,
Paris has been flaky for the past month or so, all kinds of digital pops,
I'm working, all of a sudden, graphic display on all 3 monitors goes to
gibberish, need to hard reset. Re-seated all cards,ram, IDE cables, cleaned
MEC /EDS connectors, re-imaged my OS drive.
Then I noticed during tonight's crash that the LEDs on the front of the 442
were dimming in and out = bad pwr supply. So I decide to swap the pwr supply
and looky looky what I found.
I have a long session booked for this evening so decide to try a fix. Ended
up replacing the connector on the mobo with one I had off an old brd,
spliced a used connector onto the pwr supply side, so far so good.
Just thought I'd share my grief and fix with others.
Rob
|
|
|
|
| Re: So Paris crashes hard for the forth time today...!! [message #73604 is a reply to message #73603] |
Thu, 05 October 2006 07:21  |
animix
Messages: 356
Registered: September 2006
|
Senior Member |
|
|
> and looky looky what I found.
Mmmmm.......Bar BQ!!
"Robert Arsenault" <studiomanitou@gmail.com> wrote in message
news:45250c0c@linux...
> Everything is frozen solid, no mouse , keybrd, hard reset needed. Also,
> Paris has been flaky for the past month or so, all kinds of digital pops,
> I'm working, all of a sudden, graphic display on all 3 monitors goes to
> gibberish, need to hard reset. Re-seated all cards,ram, IDE cables,
cleaned
> MEC /EDS connectors, re-imaged my OS drive.
> Then I noticed during tonight's crash that the LEDs on the front of the
442
> were dimming in and out = bad pwr supply. So I decide to swap the pwr
supply
> and looky looky what I found.
>
> I have a long session booked for this evening so decide to try a fix.
Ended
> up replacing the connector on the mobo with one I had off an old brd,
> spliced a used connector onto the pwr supply side, so far so good.
>
> Just thought I'd share my grief and fix with others.
> Rob
>
>
>
|
|
|
|
| Re: So Paris crashes hard for the forth time today...!! [message #73606 is a reply to message #73604] |
Thu, 05 October 2006 07:34 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
What's your setup? 200 EDS cards? 300GHZ pentium with 5mb ram?
"DJ" <notachance@net.net> wrote:
>> and looky looky what I found.
>
>Mmmmm.......Bar BQ!!
>
>
>"Robert Arsenault" <studiomanitou@gmail.com> wrote in message
>news:45250c0c@linux...
>> Everything is frozen solid, no mouse , keybrd, hard reset needed. Also,
>> Paris has been flaky for the past month or so, all kinds of digital pops,
>> I'm working, all of a sudden, graphic display on all 3 monitors goes to
>> gibberish, need to hard reset. Re-seated all cards,ram, IDE cables,
>cleaned
>> MEC /EDS connectors, re-imaged my OS drive.
>> Then I noticed during tonight's crash that the LEDs on the front of the
>442
>> were dimming in and out = bad pwr supply. So I decide to swap the pwr
>supply
>> and looky looky what I found.
>>
>> I have a long session booked for this evening so decide to try a fix.
>Ended
>> up replacing the connector on the mobo with one I had off an old brd,
>> spliced a used connector onto the pwr supply side, so far so good.
>>
>> Just thought I'd share my grief and fix with others.
>> Rob
>>
>>
>>
>
>
|
|
|
|
| Re: So Paris crashes hard for the forth time today...!! [message #73607 is a reply to message #73603] |
Thu, 05 October 2006 07:42 |
Nappy
Messages: 198
Registered: September 2006
|
Senior Member |
|
|
Thanks Man,
Glad your up and running.
respect
Nappy
"Robert Arsenault" <studiomanitou@gmail.com> wrote:
>Everything is frozen solid, no mouse , keybrd, hard reset needed. Also,
>Paris has been flaky for the past month or so, all kinds of digital pops,
>I'm working, all of a sudden, graphic display on all 3 monitors goes to
>gibberish, need to hard reset. Re-seated all cards,ram, IDE cables, cleaned
>MEC /EDS connectors, re-imaged my OS drive.
>Then I noticed during tonight's crash that the LEDs on the front of the
442
>were dimming in and out = bad pwr supply. So I decide to swap the pwr supply
>and looky looky what I found.
>
>I have a long session booked for this evening so decide to try a fix. Ended
>up replacing the connector on the mobo with one I had off an old brd,
>spliced a used connector onto the pwr supply side, so far so good.
>
>Just thought I'd share my grief and fix with others.
>Rob
>
>
>
|
|
|
|
| Re: So Paris crashes hard for the forth time today...!! [message #73608 is a reply to message #73606] |
Thu, 05 October 2006 07:57 |
Robert Arsenault
Messages: 49
Registered: September 2006
|
Member |
|
|
1700+ Athalon, 256 ram, 3HD, DVD burner, Matrox G450 dual head AGP vid, 3dfx
PCI vid, 2 EDS, 1 MEC, 1 442, 2 IF2, 480w pwr supply, 2 extra case fans,
ECS mobo.
Not sure what happened there, bad connector on the mobo side, heated =
BBQ...?
Rob
"John" <no@no.com> wrote in message news:45251813$1@linux...
>
> What's your setup? 200 EDS cards? 300GHZ pentium with 5mb ram?
>
> "DJ" <notachance@net.net> wrote:
>>> and looky looky what I found.
>>
>>Mmmmm.......Bar BQ!!
>>
>>
>>"Robert Arsenault" <studiomanitou@gmail.com> wrote in message
>>news:45250c0c@linux...
>>> Everything is frozen solid, no mouse , keybrd, hard reset needed. Also,
>>> Paris has been flaky for the past month or so, all kinds of digital
>>> pops,
>>> I'm working, all of a sudden, graphic display on all 3 monitors goes to
>>> gibberish, need to hard reset. Re-seated all cards,ram, IDE cables,
>>cleaned
>>> MEC /EDS connectors, re-imaged my OS drive.
>>> Then I noticed during tonight's crash that the LEDs on the front of the
>>442
>>> were dimming in and out = bad pwr supply. So I decide to swap the pwr
>>supply
>>> and looky looky what I found.
>>>
>>> I have a long session booked for this evening so decide to try a fix.
>>Ended
>>> up replacing the connector on the mobo with one I had off an old brd,
>>> spliced a used connector onto the pwr supply side, so far so good.
>>>
>>> Just thought I'd share my grief and fix with others.
>>> Rob
>>>
>>>
>>>
>>
>>
>
|
|
|
|
|
|
| Re: So Paris crashes hard for the forth time today...!! [message #73627 is a reply to message #73603] |
Thu, 05 October 2006 13:54 |
Ed
Messages: 199
Registered: February 2006
|
Senior Member |
|
|
Was this a Sony? lol.
"Robert Arsenault" <studiomanitou@gmail.com> wrote in message
news:45250c0c@linux...
> Everything is frozen solid, no mouse , keybrd, hard reset needed. Also,
> Paris has been flaky for the past month or so, all kinds of digital pops,
> I'm working, all of a sudden, graphic display on all 3 monitors goes to
> gibberish, need to hard reset. Re-seated all cards,ram, IDE cables,
> cleaned MEC /EDS connectors, re-imaged my OS drive.
> Then I noticed during tonight's crash that the LEDs on the front of the
> 442 were dimming in and out = bad pwr supply. So I decide to swap the pwr
> supply and looky looky what I found.
>
> I have a long session booked for this evening so decide to try a fix.
> Ended up replacing the connector on the mobo with one I had off an old
> brd, spliced a used connector onto the pwr supply side, so far so good.
>
> Just thought I'd share my grief and fix with others.
> Rob
>
>
|
|
|
|
Goto Forum:
Current Time: Sun Dec 15 11:17:36 PST 2024
Total time taken to generate the page: 0.04373 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
