The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Please Help Me (Recording onto "B" SubMix)
Please Help Me [message #107451] Tue, 19 February 2013 07:21 Go to next message
ronj_91602 is currently offline  ronj_91602   UNITED STATES
Messages: 64
Registered: March 2010
Location: Fort Worth Texas
Member
I have been using Paris for a couple of years and I never had to venture out of 16 channel recording. Now I find I have a need for more channels. I read everything in the manual and it never touches the real configuration of recording onto a new sub mix. If someone could please shed some light on how to do so. In the configuration window do I choose card A or B or both? Do I drag mixer B onto the patch bay and if I do how does it connect I have tried only to get "You can't cross connect". I know how to open the windows on the sub mix but when I pull down the window to switch A to B it won't highlite. I know this may sound dumb to many of you but I have spent the better part of 40 years behind an API board and 2 3M M79s so much of this is greek to me and the way the manual is written is more for the computer engineer. I would also like to add the extra c-16 I have to control the B card. Any help would be vastly appreciated. Thanks Ron

[Updated on: Tue, 19 February 2013 07:28]

Report message to a moderator

Re: Please Help Me [message #107453 is a reply to message #107451] Tue, 19 February 2013 09:48 Go to previous messageGo to next message
kerryg is currently offline  kerryg   
Messages: 1529
Registered: February 2009
Senior Member
Administrator
Your cards are basically "blocks" of sixteen channels. Importantly, inside PARIS each card represents not just the EDS card itself but the MEC and all the associated hardware inputs cabled to it.

Your submixes are also blocks of sixteen channels. So you need to first associate the card with the inputs you need (probably A?) with the submix you want to record into. You do this in the Master Mixer by hitting G to call it up and then telling the submix which card (and by extension, all the associated MEC hardware cabled to it) you want assigned to it.


"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
Re: Please Help Me [message #107454 is a reply to message #107453] Tue, 19 February 2013 10:12 Go to previous message
ronj_91602 is currently offline  ronj_91602   UNITED STATES
Messages: 64
Registered: March 2010
Location: Fort Worth Texas
Member
Thanks Kerry,
Do I need to go into the patch bay and make new connections? And, how do I set up 2 c-16s? Sorry to bug you!
Previous Topic: Sidechaining in Paris
Next Topic: SMPTE
Goto Forum:
  


Current Time: Sat Dec 14 20:26:09 PST 2024

Total time taken to generate the page: 0.01721 seconds