|
|
| Re: Drum Group Compression (CJG) Dimitrios Suggestion Explained? [message #68211 is a reply to message #68165] |
Sun, 14 May 2006 12:09   |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Hi
No it is simplier !!
!> Put on aux 1 a compressor.
set on each audio track to use compression as prefader.
Put the fader all the way down.
Then from EDS plugins choose wire out and put that after compressor on next
slot on aux.
Then choose any track in your submix and put a eds effect named "wire in"
Now you have the return of you aux1 on a paris audio track and can use eq
fader automation tricks, whatever...
Remember to close the aux1 return knob !
Hope this helps,
Regards,
Dimitrios
"Rich Lamanna" <richard.lamanna@verizon.net> wrote:
>I'm reposting this because I can't resolve this in the original thread.
In
>other words my mail server won't let me post this in the original thread,
>(CJG 5/11/2006 7:35PM).
>
>Dimitrios, I'm not sure I understand exactly what your suggesting here.
>Correct me if I'm wrong. Anyone else want to chime in?
>
>1. Choose compressor in say Aux 1.
>2. Set Aux 1 in all the drum tracks to Pre Fader.
>3. Send the return(s) of Aux 1 to an unused track(s), depending on mono
or
>stereo or,
>4. Patch the signal, with cables, physically out of the 8 out card and back
>into a free audio track(s)
>5. Eq and automate your compressed drum tracks in the new track(s)
>
>Do I have it right?
>
>Rich
>
>
|
|
|
|
| Re: Drum Group Compression (CJG) Dimitrios Suggestion Explained? [message #68212 is a reply to message #68211] |
Sun, 14 May 2006 12:30 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
eq fader automation effects? what eq automation?
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi
>No it is simplier !!
>
>!> Put on aux 1 a compressor.
>set on each audio track to use compression as prefader.
>Put the fader all the way down.
>Then from EDS plugins choose wire out and put that after compressor on next
>slot on aux.
>Then choose any track in your submix and put a eds effect named "wire in"
>Now you have the return of you aux1 on a paris audio track and can use eq
>fader automation tricks, whatever...
>Remember to close the aux1 return knob !
>
>Hope this helps,
>Regards,
>Dimitrios
>
>"Rich Lamanna" <richard.lamanna@verizon.net> wrote:
>>I'm reposting this because I can't resolve this in the original thread.
>In
>>other words my mail server won't let me post this in the original thread,
>>(CJG 5/11/2006 7:35PM).
>>
>>Dimitrios, I'm not sure I understand exactly what your suggesting here.
>>Correct me if I'm wrong. Anyone else want to chime in?
>>
>>1. Choose compressor in say Aux 1.
>>2. Set Aux 1 in all the drum tracks to Pre Fader.
>>3. Send the return(s) of Aux 1 to an unused track(s), depending on mono
>or
>>stereo or,
>>4. Patch the signal, with cables, physically out of the 8 out card and
back
>>into a free audio track(s)
>>5. Eq and automate your compressed drum tracks in the new track(s)
>>
>>Do I have it right?
>>
>>Rich
>>
>>
>
|
|
|
|
| Re: Drum Group Compression (CJG) Dimitrios Suggestion Explained? [message #68214 is a reply to message #68211] |
Sun, 14 May 2006 12:55 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
Dimitrios, Happy Greek Weekend! Is this what you mean?
For example....If your audio is on channel 1
Put a compressor on aux1
Set channel 1 to send to aux1 pre-fader.
Put the fader all the way down on channel 1
From EDS plugins choose wire out on the next slot of aux1 below the compressor
On channel 2 add eds effect "wire in".
Now you have the return of your aux1 on paris audio channel 2
Remember to close the aux1 return knob.
Also, you can't automate EQ right?
Thanks,
John
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi
>No it is simplier !!
>
>!> Put on aux 1 a compressor.
>set on each audio track to use compression as prefader.
>Put the fader all the way down.
>Then from EDS plugins choose wire out and put that after compressor on next
>slot on aux.
>Then choose any track in your submix and put a eds effect named "wire in"
>Now you have the return of you aux1 on a paris audio track and can use eq
>fader automation tricks, whatever...
>Remember to close the aux1 return knob !
>
>Hope this helps,
>Regards,
>Dimitrios
>
>"Rich Lamanna" <richard.lamanna@verizon.net> wrote:
>>I'm reposting this because I can't resolve this in the original thread.
>In
>>other words my mail server won't let me post this in the original thread,
>>(CJG 5/11/2006 7:35PM).
>>
>>Dimitrios, I'm not sure I understand exactly what your suggesting here.
>>Correct me if I'm wrong. Anyone else want to chime in?
>>
>>1. Choose compressor in say Aux 1.
>>2. Set Aux 1 in all the drum tracks to Pre Fader.
>>3. Send the return(s) of Aux 1 to an unused track(s), depending on mono
>or
>>stereo or,
>>4. Patch the signal, with cables, physically out of the 8 out card and
back
>>into a free audio track(s)
>>5. Eq and automate your compressed drum tracks in the new track(s)
>>
>>Do I have it right?
>>
>>Rich
>>
>>
>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
