Home » The PARIS Forums » PARIS: Main » Cubase 4 questions
|
|
| Re: Cubase 4 questions [message #85572 is a reply to message #85571] |
Tue, 29 May 2007 18:38   |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
Damn, C4 seems to be a problematical beeatch, judging from
you, Deej & Brandon... any way you guys can migrate back to
SXv3.xxx?
Neil
Bill L <bill@billlorentzen.com> wrote:
>I posted this at the Steiny forum, but no replies yet. Hoping one of you
>guys who has been on C4 for a while can suss out what I may have done
>wrong. I just got C4 and it is throwing me for a loop this time. I could
>not find a thing in the manual on these.
>
>Somehow overnight I have 2 new problems.
>
>1) I seem to have lost all my C4 synth settings. Before, they would all
>be there when I wanted to change a sound in Halion or any of the Cubase
>synths. Now it just shows the Browser and Filter with a tree of content
>folders, but I cannot figure out how to access the content.
>
>2) Now when I open a synth with multiple outputs, it only gives me 1
>output in the mixer even though the synth is set for multiple outs. I am
>not using instrument tracks. These are synths I added to the VSTi synth
>rack. When I first installed it, it did not have this problem. I have
>tried adding new synths to projects that have multiple outs on synths
>already, and it only gives the first output.
>
>I have already tried reinstalling, hoping it would go back to the way it
>was behaving originally, but the problems persisted.
|
|
|
|
| Re: Cubase 4 questions [message #85574 is a reply to message #85572] |
Tue, 29 May 2007 18:48 |
Bill L
Messages: 766
Registered: August 2006
|
Senior Member |
|
|
I'd like to go to 3 but I was never on 3. I went from SX to C4 (I was
using Samplitude for the past several years.)
If I had a 3 disk I could use it with my dongle, but I don't got it.
Neil wrote:
> Damn, C4 seems to be a problematical beeatch, judging from
> you, Deej & Brandon... any way you guys can migrate back to
> SXv3.xxx?
>
> Neil
>
>
> Bill L <bill@billlorentzen.com> wrote:
>> I posted this at the Steiny forum, but no replies yet. Hoping one of you
>
>> guys who has been on C4 for a while can suss out what I may have done
>> wrong. I just got C4 and it is throwing me for a loop this time. I could
>
>> not find a thing in the manual on these.
>>
>> Somehow overnight I have 2 new problems.
>>
>> 1) I seem to have lost all my C4 synth settings. Before, they would all
>
>> be there when I wanted to change a sound in Halion or any of the Cubase
>
>> synths. Now it just shows the Browser and Filter with a tree of content
>
>> folders, but I cannot figure out how to access the content.
>>
>> 2) Now when I open a synth with multiple outputs, it only gives me 1
>> output in the mixer even though the synth is set for multiple outs. I am
>
>> not using instrument tracks. These are synths I added to the VSTi synth
>
>> rack. When I first installed it, it did not have this problem. I have
>> tried adding new synths to projects that have multiple outs on synths
>> already, and it only gives the first output.
>>
>> I have already tried reinstalling, hoping it would go back to the way it
>
>> was behaving originally, but the problems persisted.
>
|
|
|
|
| Re: Cubase 4 questions [message #85579 is a reply to message #85571] |
Tue, 29 May 2007 19:45 |
Dedric Terry
Messages: 788
Registered: June 2007
|
Senior Member |
|
|
Bill - not sure about 1). Without looking at C4 I can't say if there's a
browser trick that might be alluding you, but if it's a case of the folders
appearing to be empty, you could try removing the prefs (I think they are
still under the user application data folder for Cubase - they were just xml
files in previous versions - moving them and restarting Cubase would often
clear up any corruptions and get you back up and running easily - even after
putting some of the prefs, such as workspaces/layouts, key commands, etc
back).
With 2), just go to the left (I think) of the VSTi insert in the rack and
there is a small icon with a dropdown menu to select which outputs you want
to activate. The default is a single stereo out, but you can now
enable/disable only the outs you want on any VSTi rather than littering the
mixer with every available out.
Regards,
Dedric
On 5/29/07 7:23 PM, in article 465cd378@linux, "Bill L"
<bill@billlorentzen.com> wrote:
> I posted this at the Steiny forum, but no replies yet. Hoping one of you
> guys who has been on C4 for a while can suss out what I may have done
> wrong. I just got C4 and it is throwing me for a loop this time. I could
> not find a thing in the manual on these.
>
> Somehow overnight I have 2 new problems.
>
> 1) I seem to have lost all my C4 synth settings. Before, they would all
> be there when I wanted to change a sound in Halion or any of the Cubase
> synths. Now it just shows the Browser and Filter with a tree of content
> folders, but I cannot figure out how to access the content.
>
> 2) Now when I open a synth with multiple outputs, it only gives me 1
> output in the mixer even though the synth is set for multiple outs. I am
> not using instrument tracks. These are synths I added to the VSTi synth
> rack. When I first installed it, it did not have this problem. I have
> tried adding new synths to projects that have multiple outs on synths
> already, and it only gives the first output.
>
> I have already tried reinstalling, hoping it would go back to the way it
> was behaving originally, but the problems persisted.
|
|
|
|
| Re: Cubase 4 questions [message #85620 is a reply to message #85579] |
Wed, 30 May 2007 04:23 |
Bill L
Messages: 766
Registered: August 2006
|
Senior Member |
|
|
Spot on, Dedric! Thank you v/ much.
Dedric Terry wrote:
> Bill - not sure about 1). Without looking at C4 I can't say if there's a
> browser trick that might be alluding you, but if it's a case of the folders
> appearing to be empty, you could try removing the prefs (I think they are
> still under the user application data folder for Cubase - they were just xml
> files in previous versions - moving them and restarting Cubase would often
> clear up any corruptions and get you back up and running easily - even after
> putting some of the prefs, such as workspaces/layouts, key commands, etc
> back).
>
> With 2), just go to the left (I think) of the VSTi insert in the rack and
> there is a small icon with a dropdown menu to select which outputs you want
> to activate. The default is a single stereo out, but you can now
> enable/disable only the outs you want on any VSTi rather than littering the
> mixer with every available out.
>
> Regards,
> Dedric
>
> On 5/29/07 7:23 PM, in article 465cd378@linux, "Bill L"
> <bill@billlorentzen.com> wrote:
>
>> I posted this at the Steiny forum, but no replies yet. Hoping one of you
>> guys who has been on C4 for a while can suss out what I may have done
>> wrong. I just got C4 and it is throwing me for a loop this time. I could
>> not find a thing in the manual on these.
>>
>> Somehow overnight I have 2 new problems.
>>
>> 1) I seem to have lost all my C4 synth settings. Before, they would all
>> be there when I wanted to change a sound in Halion or any of the Cubase
>> synths. Now it just shows the Browser and Filter with a tree of content
>> folders, but I cannot figure out how to access the content.
>>
>> 2) Now when I open a synth with multiple outputs, it only gives me 1
>> output in the mixer even though the synth is set for multiple outs. I am
>> not using instrument tracks. These are synths I added to the VSTi synth
>> rack. When I first installed it, it did not have this problem. I have
>> tried adding new synths to projects that have multiple outs on synths
>> already, and it only gives the first output.
>>
>> I have already tried reinstalling, hoping it would go back to the way it
>> was behaving originally, but the problems persisted.
>
|
|
|
|
Goto Forum:
Current Time: Tue Jan 14 20:54:50 PST 2025
Total time taken to generate the page: 0.00948 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
