Home » The PARIS Forums » PARIS: Main » OT Question for MAudio MIDI Sport 8x8 users
|
|
|
|
| Re: OT Question for MAudio MIDI Sport 8x8 users [message #67990 is a reply to message #67973] |
Wed, 10 May 2006 08:40   |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_001F_01C67426.97C44740
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Rick,
Thanks for the help Rick
Are you passing MTC through it or is that outside the box?
Do you use a separate MIDI box for Cubase to get to it or
do you leave the USB in while in use? Are able to get
MIDI input? I have to triple check my settings for that.
It shows 8 ins, 8 outs and the SMPTE in outs under my
list of MIDI ports. I assign the output of my master keyboard
to Cubase, engage record and yet no note data is present
when it's complete. ???
While hooked up via USB the box outputs data to everything fine.
I have to disconnect the USB to get my presets to function though.
Seems odd. Once the USB is disconnected then there's no=20
link to Cubase! =20
I'll try some more things,
Tom
"rick" <parnell68@hotmail.com> wrote in message =
news:9ce36216huotqa14la25bho89g7mivothp@4ax.com...
it's been a few months since i've used sx but do you have all your
I/O's properly assigned? i'm also assuming you have the midi cables
connected to there proper port assignments. i have mine (4 version)
connected to both my mac and pc via a usb hub and also using midi
cables connected to the various gear (m24 controller and a pro 88 kb).
On Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" <arpegio@comcast.net>
wrote:
>Help needed!
>
>Is it possible to get this box to function while connected to the =
Cubase via USB?
>It appears to only honor the presets I've created once it's =
disconnected. When
>it's connected it routes out to all synths (good) but I haven't been =
able to get
>my controllers note data in. =20
>
>Does this thing transmit MTC from the SMPTE it receives? If not then =
do I now
>have to get another MIDI module to send Cubase to and from this 8x8 =
patchbay
>to get to my synths so I can actually facilitate the presets I've =
created? This seems=20
>like the only way to allow Paris' MTC to Cubase (not all the synths =
too) and use my=20
>different presets.
>
>The Motu crashed everytime I used sysex. MIDI Sport won't even =
acknowledge I'm
>there when it's connected to Cubase via USB. No presets or MIDI =
input allowed.
>At least it's not crashing!
>
>I'm obviously confused.
------=_NextPart_000_001F_01C67426.97C44740
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Rick,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for the help Rick</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Are you passing MTC through it or is =
that outside=20
the box?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Do you use a separate MIDI box for =
Cubase to get to=20
it or</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>do you leave the USB in while in =
use? Are=20
able to get</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>MIDI input? I have to triple =
check my=20
settings for that.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>It shows 8 ins, 8 outs and the SMPTE in =
outs under=20
my</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>list of MIDI ports. I assign the =
output of my=20
master keyboard</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to Cubase, engage record and yet no =
note data is=20
present</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>when it's complete. ???</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>While hooked up via USB the box outputs =
data to=20
everything fine.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I have to disconnect the USB to get my =
presets to=20
function though.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Seems odd. Once the USB is =
disconnected then=20
there's no </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>link to Cubase! </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I'll try some more things,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>"rick" <<A=20
href=3D"mailto:parnell68@hotmail.com">parnell68@hotmail.com</A>> =
wrote in=20
message <A=20
href=3D"news:9ce36216huotqa14la25bho89g7mivothp@4ax.com">news:9ce36216huo=
tqa14la25bho89g7mivothp@4ax.com</A>...</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">it's=20
been a few months since i've used sx but do you have all your<BR>I/O's =
properly assigned? i'm also assuming you have the midi=20
cables<BR>connected to there proper port assignments. i have =
mine=20
(4 version)<BR>connected to both my mac and pc via a usb hub and =
also=20
using midi<BR>cables connected to the various gear (m24 controller and =
a pro=20
88 kb).<BR><BR>On Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>><BR>wrote:=
<BR><BR>>Help=20
needed!<BR>><BR>>Is it possible to get this box to function =
while=20
connected to the Cubase via USB?<BR>>It appears to only honor the =
presets=20
I've created once it's disconnected. When<BR>>it's connected =
it=20
routes out to all synths (good) but I haven't been able to =
get<BR>>my=20
controllers note data in. <BR>><BR>>Does this thing =
transmit MTC=20
from the SMPTE it receives? If not then do I now<BR>>have to =
get=20
another MIDI module to send Cubase to and from this 8x8 =
patchbay<BR>>to get=20
to my synths so I can actually facilitate the presets I've =
created? This=20
seems <BR>>like the only way to allow Paris' MTC to Cubase (not all =
the=20
synths too) and use my <BR>>different presets.<BR>><BR>>The =
Motu=20
crashed everytime I used sysex. MIDI Sport won't even =
acknowledge=20
I'm<BR>>there when it's connected to Cubase via USB. No =
presets or=20
MIDI input allowed.<BR>>At least it's not =
crashing!<BR>><BR>>I'm=20
obviously confused.<BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_001F_01C67426.97C44740--
|
|
|
|
| Re: OT Question for MAudio MIDI Sport 8x8 users [message #68001 is a reply to message #67990] |
Wed, 10 May 2006 12:08 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
hey tom,
i use the same box for both the mac and the pc. from what i gather
you're doing more than i am with the midi. i just have the one
controller (pro 88) that i use in both logic and sx for the vstis and
the m24 for logic though it can be used for either.
have you loaded in the sampler data crap...sorry i'm not at the puter
now and i don't remember the what the option label is to add specific
hardware for recognition.
" assign the output of my master keyboard>to Cubase, engage record and
yet no note data is present when it's complete.???"
are you sure you have the right order in what is designated as in of
out for...man i'm sorry. i'll have to go out to the studio to see
which is which. like i said it's been a few months since i used sx.
...and since the other engineer hasn't been here to eff things up i
haven't had to fix it.
On Wed, 10 May 2006 11:40:53 -0400, "Tom Bruhl" <arpegio@comcast.net>
wrote:
>Rick,
>Thanks for the help Rick
>
>Are you passing MTC through it or is that outside the box?
>Do you use a separate MIDI box for Cubase to get to it or
>do you leave the USB in while in use? Are able to get
>MIDI input? I have to triple check my settings for that.
>It shows 8 ins, 8 outs and the SMPTE in outs under my
>list of MIDI ports. I assign the output of my master keyboard
>to Cubase, engage record and yet no note data is present
>when it's complete. ???
>
>While hooked up via USB the box outputs data to everything fine.
>I have to disconnect the USB to get my presets to function though.
>Seems odd. Once the USB is disconnected then there's no
>link to Cubase!
>
>I'll try some more things,
>Tom
>
>
>
>"rick" <parnell68@hotmail.com> wrote in message news:9ce36216huotqa14la25bho89g7mivothp@4ax.com...
> it's been a few months since i've used sx but do you have all your
> I/O's properly assigned? i'm also assuming you have the midi cables
> connected to there proper port assignments. i have mine (4 version)
> connected to both my mac and pc via a usb hub and also using midi
> cables connected to the various gear (m24 controller and a pro 88 kb).
>
> On Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" <arpegio@comcast.net>
> wrote:
>
> >Help needed!
> >
> >Is it possible to get this box to function while connected to the Cubase via USB?
> >It appears to only honor the presets I've created once it's disconnected. When
> >it's connected it routes out to all synths (good) but I haven't been able to get
> >my controllers note data in.
> >
> >Does this thing transmit MTC from the SMPTE it receives? If not then do I now
> >have to get another MIDI module to send Cubase to and from this 8x8 patchbay
> >to get to my synths so I can actually facilitate the presets I've created? This seems
> >like the only way to allow Paris' MTC to Cubase (not all the synths too) and use my
> >different presets.
> >
> >The Motu crashed everytime I used sysex. MIDI Sport won't even acknowledge I'm
> >there when it's connected to Cubase via USB. No presets or MIDI input allowed.
> >At least it's not crashing!
> >
> >I'm obviously confused.
|
|
|
|
| Re: OT Question for MAudio MIDI Sport 8x8 users [message #68003 is a reply to message #68001] |
Wed, 10 May 2006 12:57 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0064_01C6744A.6A20BC50
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Rick,
"have you loaded in the sampler data crap...sorry i'm not at the puter
now and i don't remember the what the option label is to add specific
hardware for recognition."
Not sure what you're talking about here. I'll look for it though.
The way I read the graphic display is the column on the left is all the =
MIDI outputs.
I click the inputs to their right to route those MIDI outputs to those =
inputs. This works
fine once I've disconnected the USB. The reason I do this is because I =
need to program=20
synths using an Amiga (soon to go). To get Cubase to play audio to =
these synths I
have to reconnect the USB but the preset that allows the Amiga to edit =
no longer works!
Pain in the sphincter.
Major problem #1:
I set Cubase's MIDI input to #1 which is my controller's MIDI port but =
can't receive data
in Cubase. How should that be set to record MIDI data? I'm hoping to =
figure this out
on my own.
Major problem #2:
I wanted to send SMPTE to the MIDI Sport and thought it would be able to =
convert that
to MTC like the Motu box did. It seems it doesn't. I have heard that =
there is a way to get Cubase=20
to read SMPTE but am not sure how to do that. My other option I guess =
is to add a MIDI card to Paris and
another possibly to Cubase to allow MTC to do the syncing. More =
hardware I was hoping
to avoid for this task.
I'm about to try again. I'll come back for your response and tell you =
what I've learned.
Tom
"rick" <parnell68@hotmail.com> wrote in message =
news:nrd462hcmttln0fb0m39hb7jhamkj0hpfe@4ax.com...
hey tom,
i use the same box for both the mac and the pc. from what i gather
you're doing more than i am with the midi. i just have the one
controller (pro 88) that i use in both logic and sx for the vstis and
the m24 for logic though it can be used for either.
have you loaded in the sampler data crap...sorry i'm not at the puter
now and i don't remember the what the option label is to add specific
hardware for recognition.
" assign the output of my master keyboard>to Cubase, engage record and
yet no note data is present when it's complete.???"
are you sure you have the right order in what is designated as in of
out for...man i'm sorry. i'll have to go out to the studio to see
which is which. like i said it's been a few months since i used sx.
..and since the other engineer hasn't been here to eff things up i
haven't had to fix it.
On Wed, 10 May 2006 11:40:53 -0400, "Tom Bruhl" <arpegio@comcast.net>
wrote:
>Rick,
>Thanks for the help Rick
>
>Are you passing MTC through it or is that outside the box?
>Do you use a separate MIDI box for Cubase to get to it or
>do you leave the USB in while in use? Are able to get
>MIDI input? I have to triple check my settings for that.
>It shows 8 ins, 8 outs and the SMPTE in outs under my
>list of MIDI ports. I assign the output of my master keyboard
>to Cubase, engage record and yet no note data is present
>when it's complete. ???
>
>While hooked up via USB the box outputs data to everything fine.
>I have to disconnect the USB to get my presets to function though.
>Seems odd. Once the USB is disconnected then there's no=20
>link to Cubase! =20
>
>I'll try some more things,
>Tom
>
>
>
>"rick" <parnell68@hotmail.com> wrote in message =
news:9ce36216huotqa14la25bho89g7mivothp@4ax.com...
> it's been a few months since i've used sx but do you have all your
> I/O's properly assigned? i'm also assuming you have the midi =
cables
> connected to there proper port assignments. i have mine (4 =
version)
> connected to both my mac and pc via a usb hub and also using midi
> cables connected to the various gear (m24 controller and a pro 88 =
kb).
>
> On Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" =
<arpegio@comcast.net>
> wrote:
>
> >Help needed!
> >
> >Is it possible to get this box to function while connected to the =
Cubase via USB?
> >It appears to only honor the presets I've created once it's =
disconnected. When
> >it's connected it routes out to all synths (good) but I haven't =
been able to get
> >my controllers note data in. =20
> >
> >Does this thing transmit MTC from the SMPTE it receives? If not =
then do I now
> >have to get another MIDI module to send Cubase to and from this =
8x8 patchbay
> >to get to my synths so I can actually facilitate the presets I've =
created? This seems=20
> >like the only way to allow Paris' MTC to Cubase (not all the =
synths too) and use my=20
> >different presets.
> >
> >The Motu crashed everytime I used sysex. MIDI Sport won't even =
acknowledge I'm
> >there when it's connected to Cubase via USB. No presets or MIDI =
input allowed.
> >At least it's not crashing!
> >
> >I'm obviously confused.
------=_NextPart_000_0064_01C6744A.6A20BC50
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman"=20
size=3D3>Rick,</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>"have you=20
loaded in the sampler data crap...sorry i'm not at the puter<BR>now and =
i don't=20
remember the what the option label is to add specific<BR>hardware for=20
recognition."</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3DArial =
size=3D2></FONT></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>Not sure what=20
you're talking about here. I'll look for it =
though.</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3DArial =
size=3D2></FONT></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>The way I read=20
the graphic display is the column on the left is all the MIDI=20
outputs.</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>I click the=20
inputs to their right to route those MIDI outputs to those=20
inputs. This works</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>fine once I've=20
disconnected the USB. The reason I do this is because I need to =
program=20
</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>synths using an=20
Amiga (soon to go). To get Cubase to play audio to these synths=20
I</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>have to=20
reconnect the USB but the preset that allows the Amiga to edit no longer =
works!</FONT></FONT></DIV>
<DIV>Pain in the sphincter.</DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3DArial =
size=3D2></FONT></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Major problem #1:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>I set Cubase's=20
MIDI input to #1 which is my controller's MIDI port but can't receive=20
data</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>in=20
Cubase. </FONT></FONT><FONT face=3DArial size=3D2><FONT =
face=3D"Times New Roman"=20
size=3D3>How should that be set to record MIDI data? I'm hoping to =
figure=20
this out</FONT></FONT></DIV>
<DIV>on my own.</DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman"=20
size=3D3></FONT></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>Major problem=20
#2:</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>I wanted to=20
send SMPTE to the MIDI Sport and thought it would be able to convert=20
that</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>to MTC like the=20
Motu box did. It seems it doesn't. I have heard that there =
is a way=20
to get Cubase </FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>to read SMPTE=20
</FONT></FONT><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>but am=20
not sure how to do that. My other option I guess is to add a MIDI =
card to=20
Paris and</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>another=20
possibly to Cubase to allow MTC to do the syncing. More hardware I =
was=20
hoping</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>to avoid for=20
this task.</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman"=20
size=3D3></FONT></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>I'm about to=20
try again. I'll come back for your response and tell you what I've =
learned.</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman"=20
size=3D3>Tom</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman"=20
size=3D3></FONT> </DIV>
<DIV><BR></DIV></FONT>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"rick" <<A=20
href=3D"mailto:parnell68@hotmail.com">parnell68@hotmail.com</A>> =
wrote in=20
message <A=20
=
href=3D"news:nrd462hcmttln0fb0m39hb7jhamkj0hpfe@4ax.com">news:nrd462hcmtt=
ln0fb0m39hb7jhamkj0hpfe@4ax.com</A>...</DIV>hey=20
tom,<BR><BR>i use the same box for both the mac and the pc. from =
what i=20
gather<BR>you're doing more than i am with the midi. i just have =
the=20
one<BR>controller (pro 88) that i use in both logic and sx for the =
vstis=20
and<BR>the m24 for logic though it can be used for either.<BR><BR>have =
you=20
loaded in the sampler data crap...sorry i'm not at the puter<BR>now =
and i=20
don't remember the what the option label is to add =
specific<BR>hardware for=20
recognition.<BR><BR>" assign the output of my master keyboard>to =
Cubase,=20
engage record and<BR>yet no note data is present when it's=20
complete.???"<BR><BR>are you sure you have the right order in what is=20
designated as in of<BR>out for...man i'm sorry. i'll have to go =
out to=20
the studio to see<BR>which is which. like i said it's been a few =
months=20
since i used sx.<BR>..and since the other engineer hasn't been here to =
eff=20
things up i<BR>haven't had to fix it.<BR><BR>On Wed, 10 May 2006 =
11:40:53=20
-0400, "Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>><BR>wrote:=
<BR><BR>>Rick,<BR>>Thanks=20
for the help Rick<BR>><BR>>Are you passing MTC through it or is =
that=20
outside the box?<BR>>Do you use a separate MIDI box for Cubase to =
get to it=20
or<BR>>do you leave the USB in while in use? Are able to=20
get<BR>>MIDI input? I have to triple check my settings for=20
that.<BR>>It shows 8 ins, 8 outs and the SMPTE in outs under =
my<BR>>list=20
of MIDI ports. I assign the output of my master =
keyboard<BR>>to=20
Cubase, engage record and yet no note data is present<BR>>when it's =
complete. ???<BR>><BR>>While hooked up via USB the box outputs =
data to=20
everything fine.<BR>>I have to disconnect the USB to get my presets =
to=20
function though.<BR>>Seems odd. Once the USB is disconnected =
then=20
there's no <BR>>link to Cubase! <BR>><BR>>I'll try some =
more=20
things,<BR>>Tom<BR>><BR>><BR>> <BR>>"rick" <<A=20
href=3D"mailto:parnell68@hotmail.com">parnell68@hotmail.com</A>> =
wrote in=20
message <A=20
=
href=3D"news:9ce36216huotqa14la25bho89g7mivothp@4ax.com">news:9ce36216huo=
tqa14la25bho89g7mivothp@4ax.com</A>...<BR>> =20
it's been a few months since i've used sx but do you have all=20
your<BR>> I/O's properly assigned? i'm also assuming =
you have=20
the midi cables<BR>> connected to there proper port=20
assignments. i have mine (4 version)<BR>> =
connected to=20
both my mac and pc via a usb hub and also using midi<BR>> =
cables=20
connected to the various gear (m24 controller and a pro 88=20
kb).<BR>><BR>> On Tue, 9 May 2006 23:56:04 -0400, "Tom =
Bruhl"=20
<<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>><BR>>&n=
bsp;=20
wrote:<BR>><BR>> >Help needed!<BR>> =
><BR>> =20
>Is it possible to get this box to function while connected to the =
Cubase=20
via USB?<BR>> >It appears to only honor the presets I've =
created=20
once it's disconnected. When<BR>> >it's connected it =
routes=20
out to all synths (good) but I haven't been able to get<BR>> =
>my=20
controllers note data in. <BR>> ><BR>> =
>Does=20
this thing transmit MTC from the SMPTE it receives? If not then =
do I=20
now<BR>> >have to get another MIDI module to send Cubase =
to and=20
from this 8x8 patchbay<BR>> >to get to my synths so I can =
actually=20
facilitate the presets I've created? This seems <BR>> =
>like=20
the only way to allow Paris' MTC to Cubase (not all the synths too) =
and use my=20
<BR>> >different presets.<BR>> ><BR>> =
>The=20
Motu crashed everytime I used sysex. MIDI Sport won't even =
acknowledge=20
I'm<BR>> >there when it's connected to Cubase via =
USB. No=20
presets or MIDI input allowed.<BR>> >At least it's not=20
crashing!<BR>> ><BR>> >I'm obviously=20
confused.<BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0064_01C6744A.6A20BC50--
|
|
|
|
| Re: OT Question for MAudio MIDI Sport 8x8 users [message #68027 is a reply to message #68003] |
Thu, 11 May 2006 06:45 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
hey tom,
wouldn't ya know it...i fire up the pc and now nothing works...
anyhow, in the Devices>Midi Device Manager>Device Installer lists all
the (most) keyboards and modules. This might be what you're looking
for.
also Devices>Device Setup what default midi input shows up
in the arrange window when you select the midi track the output should
be the midi port and the input should be the instrument
well i've got to get back out to the studio to see why i can step
input from the pro 88 but not real time....hell it worked
yesterday...go figure.
On Wed, 10 May 2006 15:57:18 -0400, "Tom Bruhl" <arpegio@comcast.net>
wrote:
>Rick,
>"have you loaded in the sampler data crap...sorry i'm not at the puter
>now and i don't remember the what the option label is to add specific
>hardware for recognition."
>
>Not sure what you're talking about here. I'll look for it though.
>
>The way I read the graphic display is the column on the left is all the MIDI outputs.
>I click the inputs to their right to route those MIDI outputs to those inputs. This works
>fine once I've disconnected the USB. The reason I do this is because I need to program
>synths using an Amiga (soon to go). To get Cubase to play audio to these synths I
>have to reconnect the USB but the preset that allows the Amiga to edit no longer works!
>Pain in the sphincter.
>
>Major problem #1:
>I set Cubase's MIDI input to #1 which is my controller's MIDI port but can't receive data
>in Cubase. How should that be set to record MIDI data? I'm hoping to figure this out
>on my own.
>
>Major problem #2:
>I wanted to send SMPTE to the MIDI Sport and thought it would be able to convert that
>to MTC like the Motu box did. It seems it doesn't. I have heard that there is a way to get Cubase
>to read SMPTE but am not sure how to do that. My other option I guess is to add a MIDI card to Paris and
>another possibly to Cubase to allow MTC to do the syncing. More hardware I was hoping
>to avoid for this task.
>
>I'm about to try again. I'll come back for your response and tell you what I've learned.
>Tom
>
>
>
> "rick" <parnell68@hotmail.com> wrote in message news:nrd462hcmttln0fb0m39hb7jhamkj0hpfe@4ax.com...
> hey tom,
>
> i use the same box for both the mac and the pc. from what i gather
> you're doing more than i am with the midi. i just have the one
> controller (pro 88) that i use in both logic and sx for the vstis and
> the m24 for logic though it can be used for either.
>
> have you loaded in the sampler data crap...sorry i'm not at the puter
> now and i don't remember the what the option label is to add specific
> hardware for recognition.
>
> " assign the output of my master keyboard>to Cubase, engage record and
> yet no note data is present when it's complete.???"
>
> are you sure you have the right order in what is designated as in of
> out for...man i'm sorry. i'll have to go out to the studio to see
> which is which. like i said it's been a few months since i used sx.
> ..and since the other engineer hasn't been here to eff things up i
> haven't had to fix it.
>
> On Wed, 10 May 2006 11:40:53 -0400, "Tom Bruhl" <arpegio@comcast.net>
> wrote:
>
> >Rick,
> >Thanks for the help Rick
> >
> >Are you passing MTC through it or is that outside the box?
> >Do you use a separate MIDI box for Cubase to get to it or
> >do you leave the USB in while in use? Are able to get
> >MIDI input? I have to triple check my settings for that.
> >It shows 8 ins, 8 outs and the SMPTE in outs under my
> >list of MIDI ports. I assign the output of my master keyboard
> >to Cubase, engage record and yet no note data is present
> >when it's complete. ???
> >
> >While hooked up via USB the box outputs data to everything fine.
> >I have to disconnect the USB to get my presets to function though.
> >Seems odd. Once the USB is disconnected then there's no
> >link to Cubase!
> >
> >I'll try some more things,
> >Tom
> >
> >
> >
> >"rick" <parnell68@hotmail.com> wrote in message news:9ce36216huotqa14la25bho89g7mivothp@4ax.com...
> > it's been a few months since i've used sx but do you have all your
> > I/O's properly assigned? i'm also assuming you have the midi cables
> > connected to there proper port assignments. i have mine (4 version)
> > connected to both my mac and pc via a usb hub and also using midi
> > cables connected to the various gear (m24 controller and a pro 88 kb).
> >
> > On Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" <arpegio@comcast.net>
> > wrote:
> >
> > >Help needed!
> > >
> > >Is it possible to get this box to function while connected to the Cubase via USB?
> > >It appears to only honor the presets I've created once it's disconnected. When
> > >it's connected it routes out to all synths (good) but I haven't been able to get
> > >my controllers note data in.
> > >
> > >Does this thing transmit MTC from the SMPTE it receives? If not then do I now
> > >have to get another MIDI module to send Cubase to and from this 8x8 patchbay
> > >to get to my synths so I can actually facilitate the presets I've created? This seems
> > >like the only way to allow Paris' MTC to Cubase (not all the synths too) and use my
> > >different presets.
> > >
> > >The Motu crashed everytime I used sysex. MIDI Sport won't even acknowledge I'm
> > >there when it's connected to Cubase via USB. No presets or MIDI input allowed.
> > >At least it's not crashing!
> > >
> > >I'm obviously confused.
|
|
|
|
| Re: OT Question for MAudio MIDI Sport 8x8 users [message #68032 is a reply to message #68027] |
Thu, 11 May 2006 09:31 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0009_01C674F6.D25D1410
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Rick,
I'll give it a shot. Thanks!
Tom
"rick" <parnell68@hotmail.com> wrote in message =
news:slf6621t2tu708ecucc37flo27ehvilbcq@4ax.com...
hey tom,
wouldn't ya know it...i fire up the pc and now nothing works...
anyhow, in the Devices>Midi Device Manager>Device Installer lists all
the (most) keyboards and modules. This might be what you're looking
for.
also Devices>Device Setup what default midi input shows up
in the arrange window when you select the midi track the output should
be the midi port and the input should be the instrument
well i've got to get back out to the studio to see why i can step
input from the pro 88 but not real time....hell it worked
yesterday...go figure.
On Wed, 10 May 2006 15:57:18 -0400, "Tom Bruhl" <arpegio@comcast.net>
wrote:
>Rick,
>"have you loaded in the sampler data crap...sorry i'm not at the =
puter
>now and i don't remember the what the option label is to add specific
>hardware for recognition."
>
>Not sure what you're talking about here. I'll look for it though.
>
>The way I read the graphic display is the column on the left is all =
the MIDI outputs.
>I click the inputs to their right to route those MIDI outputs to =
those inputs. This works
>fine once I've disconnected the USB. The reason I do this is because =
I need to program=20
>synths using an Amiga (soon to go). To get Cubase to play audio to =
these synths I
>have to reconnect the USB but the preset that allows the Amiga to =
edit no longer works!
>Pain in the sphincter.
>
>Major problem #1:
>I set Cubase's MIDI input to #1 which is my controller's MIDI port =
but can't receive data
>in Cubase. How should that be set to record MIDI data? I'm hoping =
to figure this out
>on my own.
>
>Major problem #2:
>I wanted to send SMPTE to the MIDI Sport and thought it would be able =
to convert that
>to MTC like the Motu box did. It seems it doesn't. I have heard =
that there is a way to get Cubase=20
>to read SMPTE but am not sure how to do that. My other option I =
guess is to add a MIDI card to Paris and
>another possibly to Cubase to allow MTC to do the syncing. More =
hardware I was hoping
>to avoid for this task.
>
>I'm about to try again. I'll come back for your response and tell =
you what I've learned.
>Tom
>
>
>
> "rick" <parnell68@hotmail.com> wrote in message =
news:nrd462hcmttln0fb0m39hb7jhamkj0hpfe@4ax.com...
> hey tom,
>
> i use the same box for both the mac and the pc. from what i gather
> you're doing more than i am with the midi. i just have the one
> controller (pro 88) that i use in both logic and sx for the vstis =
and
> the m24 for logic though it can be used for either.
>
> have you loaded in the sampler data crap...sorry i'm not at the =
puter
> now and i don't remember the what the option label is to add =
specific
> hardware for recognition.
>
> " assign the output of my master keyboard>to Cubase, engage record =
and
> yet no note data is present when it's complete.???"
>
> are you sure you have the right order in what is designated as in =
of
> out for...man i'm sorry. i'll have to go out to the studio to see
> which is which. like i said it's been a few months since i used =
sx.
> ..and since the other engineer hasn't been here to eff things up i
> haven't had to fix it.
>
> On Wed, 10 May 2006 11:40:53 -0400, "Tom Bruhl" =
<arpegio@comcast.net>
> wrote:
>
> >Rick,
> >Thanks for the help Rick
> >
> >Are you passing MTC through it or is that outside the box?
> >Do you use a separate MIDI box for Cubase to get to it or
> >do you leave the USB in while in use? Are able to get
> >MIDI input? I have to triple check my settings for that.
> >It shows 8 ins, 8 outs and the SMPTE in outs under my
> >list of MIDI ports. I assign the output of my master keyboard
> >to Cubase, engage record and yet no note data is present
> >when it's complete. ???
> >
> >While hooked up via USB the box outputs data to everything fine.
> >I have to disconnect the USB to get my presets to function though.
> >Seems odd. Once the USB is disconnected then there's no=20
> >link to Cubase! =20
> >
> >I'll try some more things,
> >Tom
> >
> >
> >
> >"rick" <parnell68@hotmail.com> wrote in message =
news:9ce36216huotqa14la25bho89g7mivothp@4ax.com...
> > it's been a few months since i've used sx but do you have all =
your
> > I/O's properly assigned? i'm also assuming you have the midi =
cables
> > connected to there proper port assignments. i have mine (4 =
version)
> > connected to both my mac and pc via a usb hub and also using =
midi
> > cables connected to the various gear (m24 controller and a pro =
88 kb).
> >
> > On Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" =
<arpegio@comcast.net>
> > wrote:
> >
> > >Help needed!
> > >
> > >Is it possible to get this box to function while connected to =
the Cubase via USB?
> > >It appears to only honor the presets I've created once it's =
disconnected. When
> > >it's connected it routes out to all synths (good) but I haven't =
been able to get
> > >my controllers note data in. =20
> > >
> > >Does this thing transmit MTC from the SMPTE it receives? If =
not then do I now
> > >have to get another MIDI module to send Cubase to and from this =
8x8 patchbay
> > >to get to my synths so I can actually facilitate the presets =
I've created? This seems=20
> > >like the only way to allow Paris' MTC to Cubase (not all the =
synths too) and use my=20
> > >different presets.
> > >
> > >The Motu crashed everytime I used sysex. MIDI Sport won't even =
acknowledge I'm
> > >there when it's connected to Cubase via USB. No presets or =
MIDI input allowed.
> > >At least it's not crashing!
> > >
> > >I'm obviously confused.
------=_NextPart_000_0009_01C674F6.D25D1410
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Rick,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'll give it a shot. =
Thanks!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"rick" <<A=20
href=3D"mailto:parnell68@hotmail.com">parnell68@hotmail.com</A>> =
wrote in=20
message <A=20
=
href=3D"news:slf6621t2tu708ecucc37flo27ehvilbcq@4ax.com">news:slf6621t2tu=
708ecucc37flo27ehvilbcq@4ax.com</A>...</DIV>hey=20
tom,<BR><BR>wouldn't ya know it...i fire up the pc and now nothing=20
works...<BR>anyhow, in the Devices>Midi Device Manager>Device =
Installer=20
lists all<BR>the (most) keyboards and modules. This might be =
what you're=20
looking<BR>for.<BR><BR>also Devices>Device Setup what default midi =
input=20
shows up<BR><BR>in the arrange window when you select the midi track =
the=20
output should<BR>be the midi port and the input should be the=20
instrument<BR><BR>well i've got to get back out to the studio to see =
why i can=20
step<BR>input from the pro 88 but not real time....hell it=20
worked<BR>yesterday...go figure.<BR><BR>On Wed, 10 May 2006 15:57:18 =
-0400,=20
"Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>><BR>wrote:=
<BR><BR>>Rick,<BR>>"have=20
you loaded in the sampler data crap...sorry i'm not at the =
puter<BR>>now=20
and i don't remember the what the option label is to add=20
specific<BR>>hardware for recognition."<BR>><BR>>Not sure =
what you're=20
talking about here. I'll look for it though.<BR>><BR>>The =
way I=20
read the graphic display is the column on the left is all the MIDI=20
outputs.<BR>>I click the inputs to their right to route those MIDI =
outputs=20
to those inputs. This works<BR>>fine once I've disconnected =
the=20
USB. The reason I do this is because I need to program =
<BR>>synths=20
using an Amiga (soon to go). To get Cubase to play audio to =
these synths=20
I<BR>>have to reconnect the USB but the preset that allows the =
Amiga to=20
edit no longer works!<BR>>Pain in the =
sphincter.<BR>><BR>>Major=20
problem #1:<BR>>I set Cubase's MIDI input to #1 which is my =
controller's=20
MIDI port but can't receive data<BR>>in Cubase. How should =
that be=20
set to record MIDI data? I'm hoping to figure this out<BR>>on =
my=20
own.<BR>><BR>>Major problem #2:<BR>>I wanted to send SMPTE to =
the=20
MIDI Sport and thought it would be able to convert that<BR>>to MTC =
like the=20
Motu box did. It seems it doesn't. I have heard that there =
is a=20
way to get Cubase <BR>>to read SMPTE but am not sure how to do =
that. =20
My other option I guess is to add a MIDI card to Paris =
and<BR>>another=20
possibly to Cubase to allow MTC to do the syncing. More hardware =
I was=20
hoping<BR>>to avoid for this task.<BR>><BR>>I'm about to try=20
again. I'll come back for your response and tell you what I've=20
learned.<BR>>Tom<BR>><BR>><BR>> <BR>> "rick" =
<<A=20
href=3D"mailto:parnell68@hotmail.com">parnell68@hotmail.com</A>> =
wrote in=20
message <A=20
=
href=3D"news:nrd462hcmttln0fb0m39hb7jhamkj0hpfe@4ax.com">news:nrd462hcmtt=
ln0fb0m39hb7jhamkj0hpfe@4ax.com</A>...<BR>> =20
hey tom,<BR>><BR>> i use the same box for both the mac and =
the=20
pc. from what i gather<BR>> you're doing more than i am =
with=20
the midi. i just have the one<BR>> controller (pro 88) =
that i=20
use in both logic and sx for the vstis and<BR>> the m24 for =
logic=20
though it can be used for either.<BR>><BR>> have you =
loaded in the=20
sampler data crap...sorry i'm not at the puter<BR>> now and i =
don't=20
remember the what the option label is to add specific<BR>> =
hardware=20
for recognition.<BR>><BR>> " assign the output of my =
master=20
keyboard>to Cubase, engage record and<BR>> yet no note =
data is=20
present when it's complete.???"<BR>><BR>> are you sure you =
have=20
the right order in what is designated as in of<BR>> out =
for...man i'm=20
sorry. i'll have to go out to the studio to see<BR>> =
which is=20
which. like i said it's been a few months since i used =
sx.<BR>> =20
..and since the other engineer hasn't been here to eff things up=20
i<BR>> haven't had to fix it.<BR>><BR>> On Wed, =
10 May=20
2006 11:40:53 -0400, "Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>><BR>>&n=
bsp;=20
wrote:<BR>><BR>> >Rick,<BR>> >Thanks for =
the help=20
Rick<BR>> ><BR>> >Are you passing MTC through =
it or is=20
that outside the box?<BR>> >Do you use a separate MIDI box =
for=20
Cubase to get to it or<BR>> >do you leave the USB in while =
in=20
use? Are able to get<BR>> >MIDI input? I have =
to=20
triple check my settings for that.<BR>> >It shows 8 ins, 8 =
outs=20
and the SMPTE in outs under my<BR>> >list of MIDI =
ports. I=20
assign the output of my master keyboard<BR>> >to Cubase, =
engage=20
record and yet no note data is present<BR>> >when it's =
complete.=20
???<BR>> ><BR>> >While hooked up via USB the =
box=20
outputs data to everything fine.<BR>> >I have to =
disconnect the=20
USB to get my presets to function though.<BR>> >Seems =
odd. =20
Once the USB is disconnected then there's no <BR>> >link =
to=20
Cubase! <BR>> ><BR>> >I'll try some more =
things,<BR>> >Tom<BR>> ><BR>> =20
><BR>> ><BR>> >"rick" <<A=20
href=3D"mailto:parnell68@hotmail.com">parnell68@hotmail.com</A>> =
wrote in=20
message <A=20
=
href=3D"news:9ce36216huotqa14la25bho89g7mivothp@4ax.com">news:9ce36216huo=
tqa14la25bho89g7mivothp@4ax.com</A>...<BR>> =20
> it's been a few months since i've used sx but do you have =
all=20
your<BR>> > I/O's properly assigned? i'm also =
assuming=20
you have the midi cables<BR>> > connected to there =
proper=20
port assignments. i have mine (4 version)<BR>> =
> =20
connected to both my mac and pc via a usb hub and also using=20
midi<BR>> > cables connected to the various gear =
(m24=20
controller and a pro 88 kb).<BR>> ><BR>> =
> On=20
Tue, 9 May 2006 23:56:04 -0400, "Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>><BR>>&n=
bsp;=20
> wrote:<BR>> ><BR>> > >Help =
needed!<BR>> > ><BR>> > >Is =
it=20
possible to get this box to function while connected to the Cubase via =
USB?<BR>> > >It appears to only honor the presets =
I've=20
created once it's disconnected. When<BR>> > =
>it's=20
connected it routes out to all synths (good) but I haven't been able =
to=20
get<BR>> > >my controllers note data in. =20
<BR>> > ><BR>> > >Does this =
thing=20
transmit MTC from the SMPTE it receives? If not then do I=20
now<BR>> > >have to get another MIDI module to =
send=20
Cubase to and from this 8x8 patchbay<BR>> > >to =
get to my=20
synths so I can actually facilitate the presets I've created? =
This seems=20
<BR>> > >like the only way to allow Paris' MTC to =
Cubase=20
(not all the synths too) and use my <BR>> > =
>different=20
presets.<BR>> > ><BR>> > =
>The Motu=20
crashed everytime I used sysex. MIDI Sport won't even =
acknowledge=20
I'm<BR>> > >there when it's connected to Cubase =
via=20
USB. No presets or MIDI input allowed.<BR>> > =
>At=20
least it's not crashing!<BR>> > ><BR>> =20
> >I'm obviously confused.<BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0009_01C674F6.D25D1410--
|
|
|
|
Goto Forum:
Current Time: Sat Dec 28 04:36:27 PST 2024
Total time taken to generate the page: 0.01854 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
