Home » The PARIS Forums » PARIS: Main » OT:Need Help Installing DVD Recorder Drive
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61391 is a reply to message #61382] |
Fri, 16 December 2005 01:53   |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
all the track "Lucky Indie"
>>> g
>>>
>>>
>>
>>
>Hi, all.
I too, will be building another comp soon. But only for Paris.
Thus far I was set on the Gigabyte Ultra 939, but I have read
various posts about others having success with the Epox 9NDA3+,
and Asus A8v.
I take it that Dual core is a no go with Paris. (?).
Thanks for any clarity you guys could shed.
KimLOL... Nice haha
"Aaron Allen" <nospam@not_here.dude> wrote in message news:43a2126f@linux...
> Heh, yeah I pretty much had stuff of that nature running for years didn't
> I?
> You ought to see my brother's much more insane Tesla-esque experiments.
> His latest electromechanical trick for me was shredding the armature/brush
> material off an old sears lawn mower starter to rebuild the one on my
> bike.. using nothing more than a dremel, torch, soldering iron and some
> solder. I promise you in no way were those parts even remotely simlar. It
> works -flawlessly- and I didn't have to cough out $430 for a new one from
> Honda. Merry Christmas bro!
> I was digging around looking for video, but all I could find was this old
> picture with your mug on it.
> Remember it? (yah, thanks a lot, Lovell...)
>
> You guys gettin' cold enough down there yet?
>
> AA
>
> "Mark McCurdy" <mark@mccurdy.net> wrote in message
> news:43a1e528$
|
|
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61403 is a reply to message #61394] |
Fri, 16 December 2005 06:38 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
at all. PARIS 3.0 w/ 3 eds
> works fine.
>
> Any tips or solutions would be very helpful.
>
> Here is my system profile.
>
> TIA,
> Lance
>
> Athlon 2 gig Asus
> PC - Win 98 SE
> 450 watt Power supply
> 1 20 gig dr
> 1 80 gig dr
> 3.5 floppy
> 3 eds cards
>
>
>how about for piano tuning?
El Miguel
"DC" <dc@spamyermama.com> wrote in message news:43a0ebf2$1@linux...
>
> "Chris Wargo" <na@na.na> wrote:
>
> >Hey Don,
> >
> >Slightly off topic, but how does the Peterson software tuner compare to
> the
> >hardware units?
> >
> >-Chris
>
>
> Terrific product. I have had a VSII virtual strobe, and now I have a
> V-Sam and the software tuner.
>
> I was a beta tester for the Mac version, so we got to help fine-tune
> the thing and I love it. It has all the sweetened tunings, variable
> concert pitch settings, a zillion intonation choices, an oscilloscope
> and spectrum display, and as many of your own presets, instantly
> recallable as you want. The manual is even decent, and oh
> yeah, there is a PC version too. It even lights up which string you
> are tuning.
>
> The sweetened tunings sound great too.
>
> Evidently it runs nicely with most DAW's launched. I couldn't check
> it with Paris since there is no OS9 version.
>
> BTW, it is very stable, more even than the stand-alone versions.
>
> The deluxe version is only 79.00 USD.
>
> I love it, I use it, I complained about the manual and a couple of
> non-functional features, and they fixed them asap.
>
> Highly recommended.
>
> http://www.strobosoft.com/
>
> DC
>
>
>Record output via input onto another track, yep...
Download pdf versions of the Paris manual if you haven't done so, Joe.
El Miguel
"Don Nafe" <dnafe@magma.ca> wrote in message news:43a00d28@linux...
> Exactly what do you mean by bounce?
>
> Don
>
> "Joseph Kouri" <knotepro@dwx.com> wrote in message
news:439fb093$1@linux...
> >
> > Is there any way to bounce tracks after you record them
> > on a Paris 2.1 setup?
> >
> > Step by step Please.
> >
> > Thanks
>
>Hey Miguel! Howwaahhhyyyaaa?
Haven't used it for that, but the only problem I could see would be
having to take the computer, mic, etc to the piano. Seems like a
stand-alone tuner might be better if you do that a lot.
DC
"Miguel Vigil" <nospam@nospam.com> wrote:
>how about for piano tuning?
>
>
>El Miguel
>
>
>
>
>"DC" <dc@spamyermama.com> wrote in message news:43a0ebf2$1@linux...
>>
>> "Chris Wargo" <na@na.na> wrote:
>>
>> >Hey Don,
>> >
>> >Slightly off topic, but how does the Peterson software tuner compare
to
>> the
>> >hardware units?
>> >
>> >-Chris
>>
>>
>> Terrific product. I have had a VSII virtual strobe, and now I have a
>> V-Sam and the software tuner.
>>
>> I wa
|
|
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61407 is a reply to message #61382] |
Fri, 16 December 2005 07:18 |
Lance Reichert
Messages: 39
Registered: July 2005
|
Member |
|
|
gt;
> >
>
>Hi, Erlilo,
That's cool. I am presently running two Nvidia Quadro cards (one agp, one
pci), giving me 4 vga outputs. (One monitor for each EDS card.)
Thanks.
Kim
"erlilo" <erlilo@online.no> wrote:
>I have tested my Epox 9NDA3+ a couple of weeks now with WinXP and Paris
>without any problems yet. The only problem I've had so far with the system
>was, it couldn't use my Matrox G550 graphic card with the Matrox's own
>drivers. It was a big problem in WinME where it only could show up in VGA
>save mode. So I ended up with buying a card with Geforce GPU to be sure
it
>would work with the nForce 3 Ultra chipset in the motherboard.
>
>Erling
>
>"Kim W." <no@way.com> skrev i melding news:43a2c3ec$1@linux...
>>
>> Hi, all.
>> I too, will be building another comp soon. But only for Paris.
>> Thus far I was set on the Gigabyte Ultra 939, but I have read
>> various posts about others having success with the Epox 9NDA3+,
>> and Asus A8v.
>> I take it that Dual core is a no go with Paris. (?).
>> Thanks for any clarity you guys could shed.
>> Kim
>>
>
>Cubase SX 3z with 2 x RME HDSP 9652's 1 x RME Multiface and 4 x UAD-1's in
Magma 32 bit x13 slot chassis.
..
"Bill Lorentzen" <bill@lorentzen.ws> wrote in message news:43a2d177@linux...
> What s/w are you running?
>
> "DJ" <animix_spam-this-ahole_@animas.ne
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61417 is a reply to message #61407] |
Fri, 16 December 2005 08:44 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
nds like a filtering issue, whether that be a bad ground shield
in
> >> the USB cable or a capacitor in the usb case or the computer. Betcha'
you
> >> have an EFI/RFI issue as a result.
> >> AA
> >>
> >......or it could be a new Mac *feature*
> >
> >;oD
> >
>Howdy.
I very much agree with the idea of getting it right as I'm tracking. For
my ears, quality outboard is unbeatable. Ive never used a RNC. I can safely
say my records only got better when i stopped relying on the computer to
add vital colour to my sounds.
Cheers
"Gary Flanigan" <gary_flanigan@ce9.uscourts.gov> wrote:
>
>"Sanbar" <sanbar@wi.rr.com> wrote:
>>I'm thinking about trying to get rid of as many software effects as
>>possible. Is the idea of buying 4-5 RNC Compressors for drums along with
>a
>>couple of good compressors for vocals and bass a crazy idea. The goal is
>to
>>get the signal close enough on the way in that any touch up can be done
>with
>>Paris software thus eliminating the latency situations.
>>
>>I'm guessing that most would find this ludicrous, but if anyone is
>>succeeding with such an idea I would be curious.
>
>
>I started out recording trying to do all my compression in the box, for
reasons
>of cost and flexibility. However, the tradeoff is not really that simple.
> I have found that the performer often "plays" to the compression, especially
>during vocals. Think of it in terms of a guitar player playing to the sound
>of a sustained amp. You can't really get that after the fact. My epiphany
>about this occurred when I put my voice through a Lawson-DW Fearn-Manley
>ELOP. For the first time in my recording experience, the damned thing sound
>right off the bat like a record. Not necessarily a good record, but a record
>nonetheless. :)
>>
>>
>I own two RNC's, and they are fabulous. They sound better
than any software I have heard. I highly recommend them.
Chris
Gary Flanigan" <gary_flanigan@ce9.uscourts.gov> wrote:
>
>"Sanbar" <sanbar@wi.rr.com> wrote:
>>I'm thinking about trying to get rid of as many software effects as
>>possible. Is the idea of buying 4-5 RNC Compressors for drums along with
>a
>>couple of good compressors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61437 is a reply to message #61436] |
Fri, 16 December 2005 12:16 |
JeffH
Messages: 307
Registered: October 2007
Location: Wamic, OR
|
Senior Member |
|
|
n Australia.
>Which model do you recommend, and what have your experiences
>with this mobo been? Is it relatively trouble-free with paris XP?
>Thanks for any comments.
>Kim
>
>"TCB" <nobody@ishere.com> wrote:
>>
>>Gigabyte, Epox, or Asus? Uh, DFI maybe?
>>
>>TCB
>>
>>"Kim W." <no@way.com> wrote:
>>>
>>>Hi, all.
>>>I too, will be building another comp soon. But only for Paris.
>>>Thus far I was set on the Gigabyte Ultra 939, but I have read
>>>various posts about others having success with the Epox 9NDA3+,
>>>and Asus A8v.
>>>I take it that Dual core is a no go with Paris. (?).
>>>Thanks for any clarity you guys could shed.
>>>Kim
>>>
>>
>It'ws pretty easy to flash these boards, even if the bios doesn't support
dual core CPU's. All you do is DL the newest bios, unzip it to a floppy,
name it ASUS.ROM, load it to your ploppy drive, hit the power switch and key
ALT>F2. The rest takes care of itself.
"EK Sound" <spamnot.info@eksoundNO.com> wrote in message
news:43a316ff$1@linux...
> Yes, V1 is very bad... the newest revision of the MB works well.
>
> David.
>
> DJ wrote:
>
> > Well, to begin with the mobo has an old revision of the bios which
doesn't
> > support dual core processors so it won't boot with my dual core CPU and
I
> > don't have a single core 64 CPU here to use to boot the machine so I can
> > flash the bios. However, I believe I have figured out a way to outsmart
it.
> >
> > stay tuned.
> >
> > "erlilo" <erlilo@online.no> wrote in message news:43a29734$1@linux...
> >
> >>...hmmm....stay tuned everyone, to pray for Deej. I think it's the Asus
> >
> > A8V
> >
> >>Deluxe board he shall try out....
> >>....So, all together now, after me.....
> >>...."Don't let the AMI bios do any harm to Deej"....
> >>
> >>erlilo
> >>
> >>"DJ" <animix_spam-this-ahole_@animas.net> skrev i melding
> >>news:43a2714f@linux...
> >>
> >>>stay tuned.....bitching and whining to be announced.
> >>>
> >>>
> >>
> >>
&g
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61439 is a reply to message #61437] |
Fri, 16 December 2005 12:40 |
Lance Reichert
Messages: 39
Registered: July 2005
|
Member |
|
|
;>Deluxe board he shall try out....
> > >>....So, all together now, after me.....
> > >>...."Don't let the AMI bios do any harm to Deej"....
> > >>
> > >>erlilo
> > >>
> > >>"DJ" <animix_spam-this-ahole_@animas.net> skrev i melding
> > >>news:43a2714f@linux...
> > >>
> > >>>stay tuned.....bitching and whining to be announced.
> > >>>
> > >>>
> > >>
> > >>
> > >
> > >
>
>I track vocals through either an api pre or a demeter
vtmp-2b then into a reissue 1176 then into a ua2192
converter then straight into paris.I then add a uad
compressor plug if it enhances the track.I found
the dbx160x was a little too bright on vocals.
My 2 cents.
Gantt Kushner <gizmo@his.com> wrote:
>The RNC is a great little box for the bucks. If you're talking about tracking
>
>thru compressors, I'd say this: I frequently (but not always) track vocals,
>bass, guitars and horns thru compressors, usually dbx 160X for vocs, UREI
>LA-4's for guitars and bass (although the 160X is nice for them too) and
horns,
>
>then RNC (I have 3 of 'em). I never track drums thru compressors! Nor do
I
>ever gate drums. I would always rather have the un-compressed drum tracks
>first, then compress as needed after. In fact, I frequently don't compress
>drums, even in the mix...
>
>Just my .02 worth.
>
>Gantt
>
>Sanbar wrote:
>
>> I'm thinking about trying to get rid of as many software effects as
>> possible. Is the idea of buying 4-5 RNC Compressors for drums along with
a
>> couple of good compressors for vocals and bass a crazy idea. The goal
is to
>> get the signal close enough on the way in that any touch up can be done
with
>> Paris software thus eliminating the latency situations.
>>
>> I'm guessing that most would find this ludicrous, but if anyone is
>> succeeding with such an idea I would be curious.
>I'll third a vote for DiskWarrior.. it rocks. Recovered a totally trashed
disk on OSX for me.
AA
"rick" <parnell68@hotmail.com> wrote in message
news:t686q19p40j17fi0n3vu5f94ha2uv7n28c@4ax.com...
> did you try mounting the disk on a prior boot then do restart then the
> c command? jamie right about disk warrior though i've never tried
> norton on a mac.
>
> On Fri, 16 Dec 2005 10:13:55 -0700, "DJ"
> <animix_spam-this-ahole_@animas.net> wrote:
>
>>Last night I was trying to get our Mac to boot to a Norton Utilities CD by
>>holding down the *C* key. Wouldn't work, no way, nohow. Leave it to Mac to
>>require a third party software to defrag a hard drive.This, along with the
>>joy involved in doing simple things like copying files from a CD must be
>>the
>>isuck feature.
>>
>>;o)
>>
>>
>>"rick" <parnell68@hotmail.com> wrote in message
>>news:mqd2q1588bo40rmprm2qloactqhc249ova@4ax.com...
>>> yup...it's called iNoise.
>>>
>>> On Wed, 14 Dec 2005 16:46:14 -0700, "DJ"
>>> <animix_spam-this-ahole_
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61445 is a reply to message #61439] |
Fri, 16 December 2005 15:42 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
de ASAP!
Although I had to work with 3 people at memorex to get this togeher, they
all
bent over backward to help me.
Thanks again and have a great weekend.
Lance
"Aaron Allen" <nospam@not_here.dude> wrote in message
news:43a3524a$1@linux...
> Going off memory here, but I think you can go into MSCONFIG and reload
just
> those drivers through that panel from the Win98se CD. How escapes me at
the
> moment - lot's going on here - but I bet microsoft.com will have those
> answers in the Knowledge Base.
> http://support.microsoft.com
>
> AA
>
> "Jeff hoover" <jkhoover@excite.com> wrote in message
> news:43a32145$1@linux...
> > Lance,
> >
> > THis is what I'd try:
> >
> > 1 If 98 drivers came with the DVD go into safe mode and install them
> >
> > 2 Reboot and see if your results are good. if not:
> >
> > 3 Backup you windows 98 directory and the system state to one of those
> > extra hard drives you have
> >
> > 4 Boot off the Win98 Cd and go throught the process of installing 98
over
> > the top of itself. If a system file it "pooched" this will replace it.
> > Of course it will also put all the standard stuff back as well.
> >
> > 5 Boot again and see if it fixes the problem. If not, call tech support
> > (actually you can call me and we can discuss further if your stateside
> > 503-704-3701). Availabel 'til about 3pm pacific, then again later.
> >
> > Hope this helps
> >
> > JH
> >
> > Lance Reichert wrote:
> >> 98 se
> >>
> >>
> >> "Jeff hoover" <jkhoover@excite.com> wrote in message
> >> news:43a31b0f@linux...
> >>
> >>>Lance,
> >>>
> >>>Just to verify, you're on '98? (plan of attack coming)
> >>>
> >>>JH
> >>>
> >>>Lance Reichert wrote:
> >>>
> >>>>Hey John,
> >>>>
> >>>>The Cd drive is not recognized under safe mode, but the hard drives
are.
> >>>>
> >>>>
> >>>>
> >>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
> >>
> >> news:43a30f67@linux...
> >>
> >>>>>Lance,
> >>>>>
> >>>>>Will it come up in safe mode with either optical drive installed?
That
> >>>>>could help narrow down the field on where the problem exists.
> >>>>>
> >>>>>
> >>>>>JH
> >>>>>
> >>>>>Lance Reichert wrote:
> >>>>>
> >>>>>
> >>>>>>Still no luck.
> >>>>>>
> >>>>>>I removed all Cd drivers, and there were too many.
> >>>>>>
> >>>>>>Restarted with the new DVD burner, same crash.
> >>>>>>Checked the driver, it's the only one available.
> >>>>>>Removed it under safe mode.
> >>>>>>
> >>>>>>Put in the original Cd burner - worked for 3 years until now.
> >>>>>>same crash. checked the driver . no problems there.
> >>>>>>
> >>>>>>Can't thank you guys enough for your help.
> >>>>>>Looks like I need more!!!
> >>>>>>
> >>>>>>Lance
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>
> >>>>
> >>>>
> >>
>Oh man.. I remember this one now. Yeah, once you install EZ CD Destroyer
(now Roxio) it never leaves your system!
Glad you caught that one man, are you running an old version of
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61446 is a reply to message #61437] |
Fri, 16 December 2005 15:45 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
Roxio/Adaptec per chance?
AA
"Lance Reichert" <lance.rocks@nospam.verizon.net> wrote in message
news:43a357bf$1@linux...
> Guys - Thanks a million for your help and suggestions.
> I knew this was good place to turn when I need help.
>
> The problem is solved. It's Roxio Cd Creator.
>
> Memorex put me in touch with "the man" on the west coast.
> He'd seen it before. He e-mailed two "cleaner" utiltities: one to take off
> the nero
> software supplied with the new DVD burner, and a second to clean off roxio
> software. He said the regular add remove process would not cut it.
>
> Anyway, in a few minutes my computer has returned to normal without any
> major deal.
> I'm not watching a dvd yet but I hope to get into what this thing does
> right
> away.
>
> Just wanted to get you guys off the trouble shooting mode ASAP!
>
> Although I had to work with 3 people at memorex to get this togeher, they
> all
> bent over backward to help me.
>
> Thanks again and have a great weekend.
>
> Lance
>
>
>
>
>
>
>
>
>
> "Aaron Allen" <nospam@not_here.dude> wrote in message
> news:43a3524a$1@linux...
>> Going off memory here, but I think you can go into MSCONFIG and reload
> just
>> those drivers through that panel from the Win98se CD. How escapes me at
> the
>> moment - lot's going on here - but I bet microsoft.com will have those
>> answers in the Knowledge Base.
>> http://support.microsoft.com
>>
>> AA
>>
>> "Jeff hoover" <jkhoover@excite.com> wrote in message
>> news:43a32145$1@linux...
>> > Lance,
>> >
>> > THis is what I'd try:
>> >
>> > 1 If 98 drivers came with the DVD go into safe mode and install them
>> >
>> > 2 Reboot and see if your results are good. if not:
>> >
>> > 3 Backup you windows 98 directory and the system state to one of those
>> > extra hard drives you have
>> >
>> > 4 Boot off the Win98 Cd and go throught the process of installing 98
> over
>> > the top of itself. If a system file it "pooched" this will replace it.
>> > Of course it will also put all the standard stuff back as well.
>> >
>> > 5 Boot again and see if it fixes the problem. If not, call tech
>> > support
>> > (actually you can call me and we can discuss further if your stateside
>> > 503-704-3701). Availabel 'til about 3pm pacific, then again later.
>> >
>> > Hope this helps
>> >
>> > JH
>> >
>> > Lance Reichert wrote:
>> >> 98 se
>> >>
>> >>
>> >> "Jeff hoover" <jkhoover@excite.com> wrote in message
>> >> news:43a31b0f@linux...
>> >>
>> >>>Lance,
>> >>>
>> >>>Just to verify, you're on '98? (plan of attack coming)
>> >>>
>
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61447 is a reply to message #61446] |
Fri, 16 December 2005 16:11 |
Lance Reichert
Messages: 39
Registered: July 2005
|
Member |
|
|
> >>>JH
>> >>>
>> >>>Lance Reichert wrote:
>> >>>
>> >>>>Hey John,
>> >>>>
>> >>>>The Cd drive is not recognized under safe mode, but the hard drives
> are.
>> >>>>
>> >>>>
>> >>>>
>> >>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
>> >>
>> >> news:43a30f67@linux...
>> >>
>> >>>>>Lance,
>> >>>>>
>> >>>>>Will it come up in safe mode with either optical drive installed?
> That
>> >>>>>could help narrow down the field on where the problem exists.
>> >>>>>
>> >>>>>
>> >>>>>JH
>> >>>>>
>> >>>>>Lance Reichert wrote:
>> >>>>>
>> >>>>>
>> >>>>>>Still no luck.
>> >>>>>>
>> >>>>>>I removed all Cd drivers, and there were too many.
>> >>>>>>
>> >>>>>>Restarted with the new DVD burner, same crash.
>> >>>>>>Checked the driver, it's the only one available.
>> >>>>>>Removed it under safe mode.
>> >>>>>>
>> >>>>>>Put in the original Cd burner - worked for 3 years until now.
>> >>>>>>same crash. checked the driver . no problems there.
>> >>>>>>
>> >>>>>>Can't thank you guys enough for your help.
>> >>>>>>Looks like I need more!!!
>> >>>>>>
>> >>>>>>Lance
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>
>> >>>>
>> >>>>
>> >>
>>
>
>It was version 4.
I re-installed nero, loaded a pat metheny dvd and bang. The same crash
happened.
So I took the nero off for the time being.
As long as I can work the way I did before I really don't care.
I'm emailing memorex to see if they have a remedy. If not,
I'lll return the new burner, and stick with IDE drives as backup for now.
"Aaron Allen" <nospam@not_here.dude> wrote in message news:43a35c45@linux...
> Oh man.. I remember this one now. Yeah, once you install EZ CD Destroyer
> (now Roxio) it never leaves your system!
> Glad you caught that one man, are you running an old version of
> Roxio/Adaptec per chance?
>
> AA
>
>
> "Lance Reichert" <lance.rocks@nospam.verizon.net> wrote in message
> news:43a357bf$1@linux...
> > Guys - Thanks a million for your help and suggestions.
> > I knew this was good place to turn when I need help.
> >
> > The problem is solved. It's Roxio Cd Creator.
> >
> > Memorex put me in touch with "the man" on the west coast.
> > He'd seen it before. He e-mailed two "cleaner" utiltities: one to take
off
> > the nero
> > software supplied with the new DVD burner, and a second to clean off
roxio
> > software. He said the regular add remove process would not cut it.
> >
> > Anyway, in a few minutes my computer has returned to normal without any
> > major deal.
> > I'm not watching a dvd yet but I hope to get into what this thing does
> > right
> > away.
> >
> > Just wanted to get you guys off the trouble shooting mode ASAP!
> >
> > Although I had to work with 3 people at memorex to get this togeher,
they
> > all
> > bent over backward to help me.
> >
> > Thanks again and have a great weekend.
> >
> > Lance
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Aaron Allen" <nospam@not_here.dude> wrote in message
> > news:43a3524a$1@linux...
> >> Going off memory here, but I think you can go into MSCONFIG and reload
> > just
> >> those drivers through that panel from the Win98se CD. How escapes me at
> > the
> >> moment - lot's going on here - but I bet microsoft.com will have those
> >> answers in the Knowledge Base.
> >> http://support.microsoft.com
>
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61448 is a reply to message #61447] |
Fri, 16 December 2005 16:27 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
; >>
> >> AA
> >>
> >> "Jeff hoover" <jkhoover@excite.com> wrote in message
> >> news:43a32145$1@linux...
> >> > Lance,
> >> >
> >> > THis is what I'd try:
> >> >
> >> > 1 If 98 drivers came with the DVD go into safe mode and install them
> >> >
> >> > 2 Reboot and see if your results are good. if not:
> >> >
> >> > 3 Backup you windows 98 directory and the system state to one of
those
> >> > extra hard drives you have
> >> >
> >> > 4 Boot off the Win98 Cd and go throught the process of installing 98
> > over
> >> > the top of itself. If a system file it "pooched" this will replace
it.
> >> > Of course it will also put all the standard stuff back as well.
> >> >
> >> > 5 Boot again and see if it fixes the problem. If not, call tech
> >> > support
> >> > (actually you can call me and we can discuss further if your
stateside
> >> > 503-704-3701). Availabel 'til about 3pm pacific, then again later.
> >> >
> >> > Hope this helps
> >> >
> >> > JH
> >> >
> >> > Lance Reichert wrote:
> >> >> 98 se
> >> >>
> >> >>
> >> >> "Jeff hoover" <jkhoover@excite.com> wrote in message
> >> >> news:43a31b0f@linux...
> >> >>
> >> >>>Lance,
> >> >>>
> >> >>>Just to verify, you're on '98? (plan of attack coming)
> >> >>>
> >> >>>JH
> >> >>>
> >> >>>Lance Reichert wrote:
> >> >>>
> >> >>>>Hey John,
> >> >>>>
> >> >>>>The Cd drive is not recognized under safe mode, but the hard drives
> > are.
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
> >> >>
> >> >> news:43a30f67@linux...
> >> >>
> >> >>>>>Lance,
> >> >>>>>
> >> >>>>>Will it come up in safe mode with either optical drive installed?
> > That
> >> >>>>>could help narrow down the field on where the problem exists.
> >> >>>>>
> >> >>>>>
> >> >>>>>JH
> >> >>>>>
> >> >>>>>Lance Reichert wrote:
> >> >>>>>
> >> >>>>>
> >> >>>>>>Still no luck.
> >> >>>>>>
> >> >>>>>>I removed all Cd drivers, and there were too many.
> >> >>>>>>
> >> >>>>>>Restarted with the new DVD burner, same crash.
> >> >>>>>>Checked the driver, it's the only one available.
> >> >>>>>>Removed it under safe mode.
> >> >>>>>>
> >> >>>>>>Put in the original Cd burner - worked for 3 years until now.
> >> >>>>>>same crash. checked the driver . no problems there.
> >> >>>>>>
> >> >>>>>>Can't thank you guys enough for your help.
> >> >>>>>>Looks like I need more!!!
> >> >>>>>>
> >> >>>>>>Lance
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>
> >>
> >
> >
>
>I tried one as a 24/44.1 .raw file. It opened the file , but the left side
played back at double speed and the right side was just white noise. But if
there's a chance, I might play with that option some more.
Thanks for the suggestion,
CL
<david@revealaudio.com> wrote in message news:43a26062@linux...
>
> On 14-Dec-2005, "Chris Latham" <latham_c@bellsouth.net> wrote:
>
> > he had generated SDII
> > files, which until that moment he had no idea what he was making when he
> > bounced to disk...
>
> Have you tried opening them up as raw files in Wavelab? If you know your
> sampling rate and bit depth, you can put that in and tell it that it's in
> Motorola format. Wavelab should be able to open it up, and then you can
> save it as a WAV file and get to work.
>
> davidHad a simliar issue with a Kodak install on a laptop once. Couldn't see
the cd until we had eraidicated the software and got the old drivers back.
JH
Lance Reichert wrote:
> It was version 4.
>
> I re-installed nero, loaded a pat metheny dvd and bang. The same crash
> happened.
> So I took the nero off for the time being.
> As long as I can work the way I did before I really don't care.
>
> I'm emailing memorex to see if they have a remedy. If not,
> I'lll return the new burner, and stick with IDE drives as backup for now.
>
>
>
>
> "Aaron Allen&quo
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61449 is a reply to message #61448] |
Fri, 16 December 2005 16:47 |
Lance Reichert
Messages: 39
Registered: July 2005
|
Member |
|
|
t; <nospam@not_here.dude> wrote in message news:43a35c45@linux...
>
>>Oh man.. I remember this one now. Yeah, once you install EZ CD Destroyer
>>(now Roxio) it never leaves your system!
>>Glad you caught that one man, are you running an old version of
>>Roxio/Adaptec per chance?
>>
>>AA
>>
>>
>>"Lance Reichert" <lance.rocks@nospam.verizon.net> wrote in message
>>news:43a357bf$1@linux...
>>
>>>Guys - Thanks a million for your help and suggestions.
>>>I knew this was good place to turn when I need help.
>>>
>>>The problem is solved. It's Roxio Cd Creator.
>>>
>>>Memorex put me in touch with "the man" on the west coast.
>>>He'd seen it before. He e-mailed two "cleaner" utiltities: one to take
>
> off
>
>>>the nero
>>>software supplied with the new DVD burner, and a second to clean off
>
> roxio
>
>>>software. He said the regular add remove process would not cut it.
>>>
>>>Anyway, in a few minutes my computer has returned to normal without any
>>>major deal.
>>>I'm not watching a dvd yet but I hope to get into what this thing does
>>>right
>>>away.
>>>
>>>Just wanted to get you guys off the trouble shooting mode ASAP!
>>>
>>>Although I had to work with 3 people at memorex to get this togeher,
>
> they
>
>>>all
>>>bent over backward to help me.
>>>
>>>Thanks again and have a great weekend.
>>>
>>>Lance
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>"Aaron Allen" <nospam@not_here.dude> wrote in message
>>>news:43a3524a$1@linux...
>>>
>>>>Going off memory here, but I think you can go into MSCONFIG and reload
>>>
>>>just
>>>
>>>>those drivers through that panel from the Win98se CD. How escapes me at
>>>
>>>the
>>>
>>>>moment - lot's going on here - but I bet microsoft.com will have those
>>>>answers in the Knowledge Base.
>>>>http://support.microsoft.com
>>>>
>>>>AA
>>>>
>>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
>>>>news:43a32145$1@linux...
>>>>
>>>>>Lance,
>>>>>
>>>>>THis is what I'd try:
>>>>>
>>>>>1 If 98 drivers came with the DVD go into safe mode and install them
>>>>>
>>>>>2 Reboot and see if your results are good. if not:
>>>>>
>>>>>3 Backup you windows 98 directory and the system state to one of
>
> those
>
>>>>>extra hard drives you have
>>>>>
>>>>>4 Boot off the Win98 Cd and go throught the process of installing 98
>>>
>>>over
>>>
>>>>>the top of itself. If a system file it "pooched" this will replace
>
> it.
>
>>>>>Of course it will also put all the standard stuff back as well.
>>>>>
>>>>>5 Boot again and see if it fixes the problem. If not, call tech
>>>>>support
>>>>>(actually you can call me and we can discuss further if your
>
> stateside
>
>>>>>503-704-3701). Availabel 'til about 3pm pacific, then again later.
>>>>>
>>>>>Hope this helps
>>>>>
>>>>>JH
>>>>>
>>>>>Lance Reichert wrote:
>>>>>
>>>>>>98 se
>>>>>>
>>>>>>
>>>>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
>>>>>>news:43a31b0f@linux...
>>>>>>
>>>>>>
>>>>>>>Lance,
>>>>>>>
>>>>>>>Just to verify, you're on '98? (plan of attack coming)
>>>>>>>
>>>>>>>JH
>>>>>>>
>>>>>>>Lance Reichert wrote:
>>>>>>>
>>>>>>>
>>>>>>>>Hey John,
>>>>>>>>
>>>>>>>>The Cd drive is not recognized under safe mode, but the hard drives
>>>
>>>are.
>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
>>>>>>
>>>>>>news:43a30f67@linux...
>>>>>>
>>>>>>
>>>>>>>>>Lance,
>>>>>>>>>
>>>>>>>>>Will it come up in safe mode with either optical drive installed?
>>>
>>>That
>>>
>>>>>>>>>could help narrow down the field on where the problem exists.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>JH
>>>>>>>>>
>>>>>>>>>Lance Reichert wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>Still no luck.
>>>>>>>>>>
>>>>>>>>>>I removed all Cd drivers, and there were too many.
>>>>>>>>>>
>>>>>>>>>>Restarted with the new DVD burner, same crash.
>>>>>>>>>>Checked the driver, it's the only one available.
>>>>>>>>>>Removed it under safe mode.
>>>>>>>>>>
>>>>>>>>>>Put in the original Cd burner - worked for 3 years until now.
>>>>>>>>>>same crash. checked the driver . no problems there.
>>>>>>>>>>
>>>>>>>>>>Can't thank you guys enough for your help.
>>>>>>>>>>Looks like I need more!!!
>>>>>>>>>>
>>>>>>>>>>Lance
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>&
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61451 is a reply to message #61449] |
Fri, 16 December 2005 17:27 |
JeffH
Messages: 307
Registered: October 2007
Location: Wamic, OR
|
Senior Member |
|
|
t; It was version 4.
>
> I re-installed nero, loaded a pat metheny dvd and bang. The same crash
> happened.
> So I took the nero off for the time being.
> As long as I can work the way I did before I really don't care.
>
> I'm emailing memorex to see if they have a remedy. If not,
> I'lll return the new burner, and stick with IDE drives as backup for now.
>
>
>
>
> "Aaron Allen" <nospam@not_here.dude> wrote in message
> news:43a35c45@linux...
>> Oh man.. I remember this one now. Yeah, once you install EZ CD Destroyer
>> (now Roxio) it never leaves your system!
>> Glad you caught that one man, are you running an old version of
>> Roxio/Adaptec per chance?
>>
>> AA
>>
>>
>> "Lance Reichert" <lance.rocks@nospam.verizon.net> wrote in message
>> news:43a357bf$1@linux...
>> > Guys - Thanks a million for your help and suggestions.
>> > I knew this was good place to turn when I need help.
>> >
>> > The problem is solved. It's Roxio Cd Creator.
>> >
>> > Memorex put me in touch with "the man" on the west coast.
>> > He'd seen it before. He e-mailed two "cleaner" utiltities: one to take
> off
>> > the nero
>> > software supplied with the new DVD burner, and a second to clean off
> roxio
>> > software. He said the regular add remove process would not cut it.
>> >
>> > Anyway, in a few minutes my computer has returned to normal without any
>> > major deal.
>> > I'm not watching a dvd yet but I hope to get into what this thing does
>> > right
>> > away.
>> >
>> > Just wanted to get you guys off the trouble shooting mode ASAP!
>> >
>> > Although I had to work with 3 people at memorex to get this togeher,
> they
>> > all
>> > bent over backward to help me.
>> >
>> > Thanks again and have a great weekend.
>> >
>> > Lance
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > "Aaron Allen" <nospam@not_here.dude> wrote in message
>> > news:43a3524a$1@linux...
>> >> Going off memory here, but I think you can go into MSCONFIG and reload
>> > just
>> >> those drivers through that panel from the Win98se CD. How escapes me
>> >> at
>> > the
>> >> moment - lot's going on here - but I bet microsoft.com will have those
>> >> answers in the Knowledge Base.
>> >> http://support.microsoft.com
>> >>
>> >> AA
>> >>
>> >> "Jeff hoover" <jkhoover@excite.com> wrote in message
>> >> news:43a32145$1@linux...
>> >> > Lance,
>> >> >
>> >> > THis is what I'd try:
>> >> >
>> >> > 1 If 98 drivers came with the DVD go into safe mode and install them
>> >> >
>> >> > 2 Reboot and see if your results are good. if not:
>> >> >
>> >> > 3 Backup you windows 98 directory and the system state to one of
> those
>> >> > extra hard drives you have
>> >> >
>> >> > 4 Boot off the Win98 Cd and go throught the process of installing 98
>> > over
>> >> > the top of itself. If a system file it "pooched" this will replace
> it.
>> >> > Of course it will also put all the standard stuff back as well.
>> >> >
>> >> > 5 Boot again and see if it fixes the problem. If not, call tech
>> >> > support
>> >> > (actually you can call me and we can discuss further if your
> stateside
>> >> > 503-704-3701). Availabel 'til about 3pm pacific, then again later.
>> >> >
>> >> > Hope this helps
>> >> >
>> >> > JH
>> >> >
>> >> > Lance Reichert wrote:
>> >> >> 98 se
>> >> >>
>> >> >>
>> >> >> "Jeff hoover" <jkhoover@excite.com> wrote in message
>> >> >> news:43a31b0f@linux...
>> >> >>
>> >> >>>Lance,
>> >> >>>
>> >> >>>Just to verify, you're on '98? (plan of attack coming)
>> >> >>>
>> >> >>>JH
>> >> >>>
>> >> >>>Lance Reichert wrote:
>> >> >>>
>> >> >>>>Hey John,
>> >> >>>>
>> >> >>>>The Cd drive is not recognized under safe mode, but the hard
>> >> >>>>drives
>> > are.
>> >> >>>>
>> >> >>>>
>> >> >>>>
>> >> >>>>"Jeff hoover" <jkhoover@excite.com> wrote in message
>> >> >>
>> >> >> news:43a30f67@linux...
>> >> >>
>> >> >>>>>Lance,
>> >> >>>>>
>> >> >>>>>Will it come up in safe mode with either optical drive installed?
>> > That
>> >> >>>>>could help narrow down the field on where the problem exists.
>> >> >>>>>
>> >> >>>>>
>> >> >>>>>JH
>> >> >>>>>
>> >> >>>>>Lance Reichert wrote:
>> >> >>>>>
>> >> >>>>>
>> >> >>>>>>Still no luck.
>> >> >>>>>>
>> >> >>>>>>I removed all Cd drivers, and there were too many.
>> >> >>>>>>
>> >> >>>>>>Restarted with the new DVD burner, same crash.
>> >> >>>>>>Checked the driver, it's the only one available.
>> >> >>>>>>Removed it under safe mode.
>> >> >>>>>>
>> >> >>>>>>Put in the original Cd burner - worked for 3 years until now.
>> >> >>>>>>same crash. checked the driver . no problems there.
>> >> >>>>>>
>> >> >>>>>>Can't thank you guys enough for your help.
>> >> >>>>>>Looks like I need more!!!
>> >> >>>>>>
>> >> >>>>>>Lance
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>
>> >> >>>>
>> >> >>>>
>> >> >>
>> >>
>> >
>> >
>>
>>
>
>This has been so easy I almost feel guilty. All I did was instally the CPU,
strap on the heatsink, install some RAM, hook it up to my PSU and drives,
flash the bios, load some updated drivers and this seems to be done. I guess
moving from an ASUS a7V8X-X mobo to an A8V-Deluxe mobo isn't that big a
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61452 is a reply to message #61449] |
Fri, 16 December 2005 18:24 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
deal. ........I'm literally knocking on wood as I post this.
Getting ready to install my Magma host card and all of the other peripheral
crap now so we'll see if the IRQ fireworks begin.
;o)
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:43a2714f@linux...
> stay tuned.....bitching and whining to be announced.
>
>You posted good vibes 'before` getting the Magma in and Paris running?
Oh man, now you've done it..........
AA
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:43a3781b$1@linux...
> This has been so easy I almost feel guilty. All I did was instally the
> CPU,
> strap on the heatsink, install some RAM, hook it up to my PSU and drives,
> flash the bios, load some updated drivers and this seems to be done. I
> guess
> moving from an ASUS a7V8X-X mobo to an A8V-Deluxe mobo isn't that big a
> deal. ........I'm literally knocking on wood as I post this.
>
> Getting ready to install my Magma host card and all of the other
> peripheral
> crap now so we'll see if the IRQ fireworks begin.
>
> ;o)
>
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:43a2714f@linux...
>> stay tuned.....bitching and whining to be announced.
>>
>>
>
>"Aaron Allen" <nospam@not_here.dude> wrote:
>You posted good vibes 'before` getting the Magma in and Paris running?
>Oh man, now you've done it..........
Hehe... [snigger snigger]I just did that Deej
I installed a new C drive that already had an XP operating system on it...
Major heartache..I ended up having to reinstall XP....Pain....
--
Martin Harrington
www.lendanear-sound.com
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:43a30fe6$1@linux...
>I couldn't find an A8V-Deluxe from the same place I got my CPU. I bought an
> OEM board and now I'm having to jump through the hoops. I've just about
> got
> this sussed though.........there is, however......plenty of opportunity
> for
> some major pain over the weekend as I attempt to migrate my old HD over to
> this new mobo without reformatting an reloading the OS and all of my
> software programs.
> Due to many similarities that seem to be carried over from older to newer
> ASUS boards with VIA chipsets, I've had some previous success with this by
> just loading the old system drive and updating the onboard driver sets.
> Perhaps there will be minimal wailing, gnashing of teeth, rending of
> garments.....etc........but then again.....what would a DAW build be
> without
> at least one major catastrophe? I have a feeling I know exactly at wht
> stage
> of this it will happen, but I'm keeping it secret until I know for sure.
>
> ;o)
> .
>
>
>
> ;o)
>
> "erlilo" <erlilo@online.no> wrote in message news:43a3075a$1@linux...
>> It's nearly four months since I got my A8V Deluxe board delivered with
>> the
>> correct revision for dual core, so I must say, if you buyed both dual
> core
>> processor and board from the same place as a package, they should know
>> better than sell you an old revision board that is good over a half year
>> old, that was made to use with a single core processor. My A8V package
>> was
>> marked well to show it's ready for Athlon X2 processors and I know the
> first
>> bios to work with X2 was version 1013 from 3th June 05. Hope you will
> figure
>> it out easily to update the bios.
>>
>> Erling
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> skrev i melding
>> news:43a2eccd$1@linux...
>> > Well, to begin with the mobo has an old revision of the bios which
> doesn't
>> > support dual core processors so it won't boot with my dual core CPU and
> I
>> > don't have a single core 64 CPU here to use to boot the machine so I
>> > can
>> > flash the bios. However, I believe I have figured out a way to outsmart
>> > it.
>> >
>> > stay tuned.
>> >
>> > "erlilo" <erlilo@online.no> wrote in message news:43a29734$1@linux...
>> >> ...hmmm....stay tuned everyone, to pray for Deej. I think it's the
>> >> Asus
>> > A8V
>> >> Deluxe board he shall try out....
>> >> ....So, all together now, after me.....
>> >> ...."Don't let the AMI bios do any harm to Deej"....
>> >>
>> >> erlilo
>> >>
>> >> "DJ" <animix_spam-this-ahole_@animas.net> skrev i melding
>> >> news:43a2714f@linux...
>> >> > stay tuned.....bitching and whining to be announced.
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>Hey DJ,
I wish my upgrade had gone as easy as yours appears to be going.I kind of
jumped out on a limb as I was in a desperate situation on getting my system
back up and going so I let the local computer store talk me in to going with
a intel processor and msi board. At first it was really crazy but tonight
it looks like it is settling down and seems to be solid. Tomorrow I will
record tracks and push it around and see what happens. I am looking for a
Directx deesser plugin that will work with Paris. Anybody
Thanks
David P
>This has been so easy I almost feel guilty. All I did was instally the CPU,
>strap on the heatsink, install some RAM, hook it up to my PSU and drives,
>flash the bios, load some updated drivers and this seems to be done. I guess
>moving from an ASUS a7V8X-X mobo to an A8V-Deluxe mobo isn't that big a
>deal. ........I'm literally knocking on wood as I post this.
>
>Getting ready to install my Magma host card and all of the other peripheral
>crap now so we'll see if the IRQ fireworks begin.
>
>;o)
>
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:43a2714f@linux...
>> stay tuned.....bitching and whining to be announced.
>>
>>
>
>Well..........no workee with the Magma aND IRQ assignments and getting
squirrellier by the minute on current OS. I ghosted it and pulled the
drive. Now I have got a brand new WD 80G 8MB cache formatted and I installed
Win XP. Immediate problems with my Matrox graphics cards right after I
installed the VIA 4in1 drivers for the mobo. It's gonna be a hellacious
weekend I'm afraid.
;o{
"Kim" <hiddensounds@hotmail.com> wrote in message news:43a39439$1@linux...
>
> "Aaron Allen" <nospam@not_here.dude> wrote:
> >You posted good vibes 'before` getting the Magma in and Paris running?
> >Oh man, now you've done it..........
>
> Hehe... [snigger snigger]Yep!!!.......definitely an issue with teh VIA 4in1 driver. Damn!!! I hope
this isn't an incompatibility issue between the KT 800 and the Matrox
driver. I was sorta' thinking that this might be a friggin trainwreck. The
G450 is a bit long in the tooth.
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:43a3aac9$1@linux...
> Well..........no workee with the Magma aND IRQ assignments and getting
> squirrellier by the minute on current OS. I ghosted it and pulle
|
|
|
|
| Re: OT:Need Help Installing DVD Recorder Drive [message #61464 is a reply to message #61448] |
Sat, 17 December 2005 02:33 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
> Win XP. Immediate problems with my Matrox graphics cards right after
I
>> > installed the VIA 4in1 drivers for the mobo. It's gonna be a hellacious
>> > weekend I'm afraid.
>> >
>> > ;o{
>> >
>> > "Kim" <hiddensounds@hotmail.com> wrote in message
>news:43a39439$1@linux...
>> > >
>> > > "Aaron Allen" <nospam@not_here.dude> wrote:
>> > > >You posted good vibes 'before` getting the Magma in and Paris
>running?
>> > > >Oh man, now you've done it..........
>> > >
>> > > Hehe... [snigger snigger]
>> >
>> >
>>
>>
>
>Hey Deej! If it were simple, it wouldn't be a challenge, and you'd get bored
and you'd have to buy some new equipment or something; )
James
"erlilo" <erlilo@online.no> wrote:
>Doug, this seems to again be a long story for you. Have you tested with
the
>new Matrox G450 certified drivers from sept.05. I had no luck with the new
>driver on my sForce Epox 9NDA3+ board but maybe VIA will eat it? The new
>driver is for WinXP.
>
>Erling
>
>"DJ" <animix_spam-this-ahole_@animas.net> skrev i melding
>news:43a3bb3e$1@linux...
>> Major suckage. The VIA AGP driver gets corrupted whenever I insert my
>> Matrox
>> G450 PCI card. It's a repeatable situation. Now.........do I really need
>> this driver? That is the question.
>>
>> Hmmmm...........
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:43a3b023@linux...
>>> Yep!!!.......definitely an issue with teh VIA 4in1 driver. Damn!!! I
hope
>>> this isn't an incompatibility issue between the KT 800 and the Matrox
>>> driver. I was sorta' thinking that this might be a friggin trainwreck.
>>> The
>>> G450 is a bit long in the tooth.
>>>
>>>
>>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>> news:43a3aac9$1@linux...
>>> > Well..........no workee with the Magma aND IRQ assignments and getting
>>> > squirrellier by the minute on current OS. I ghosted it and pulled
the
>>> > drive. Now I have got a brand new WD 80G 8MB cache formatted and I
>>> installed
>>> > Win XP. Immediate problems with my Matrox graphics cards right after
I
>>> > installed the VIA 4in1 drivers for the mobo. It's gonna be a hellacious
>>> > weekend I'm afraid.
>>> >
>>> > ;o{
>>> >
>>> > "Kim" <hiddensounds@hotmail.com> wrote in message
>> news:43a39439$1@linux...
>>> > >
>>> > > "Aaron Allen" <nospam@not_here.dude> wrote:
>>> > > >You posted good vibes 'before` getting the Magma in and Paris
>> running?
>>> > > >Oh man, now you've done it..........
>>> > >
>>> > > Hehe... [snigger snigger]
>>> >
>>> >
>>>
>>>
>>
>>
>
>Statistical, I think it was from the late '90 years, it showed up in an
American examination that Mac users wasn't so good at school as PC
users!?!?. I don't know but maybe PC users loves to find solutions on
problems in the life where Mac users don't, because they don't want or know
how to find out any solutions on problems!?!? As said I don't know, just
speculations after I remembered reading the examination in a Swedish
computer magazine from the last century. As said one more time, I don't know
if it's true. You see, I don't want any problems with fanatic, Macreligious
users after writing this;-o)
Camouflated as an unknown erlilo-writer:-)))
"James McCloskey" <excelsm@hotmail.com> skrev i melding
news:43a41dc9$1@linux...
>
> I wonder if Mac users are going to have to deal with issues like this,
> once
> we have Intel inside??? What a PITA!
>
> James
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>Major suckage. The VIA AGP driver gets corrupted whenever I insert my
>>Matrox
>>G450 PCI card. It's a repeatable situation. Now.........do I really need
>>this driver? That is the question.
>>
>>Hmmmm...........
>>
>>
>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>news:43a3b023@linux...
>>> Yep!!!.......definitely an issue with teh VIA 4in1 driver. Damn!!! I
>>> hope
>>> this isn't an incompatibility issue between the KT 800 and the Matrox
>>> driver. I was sorta' thinking that this might be a friggin trainwreck.
> The
>>> G450 is a bit long in the tooth.
>>>
>>>
>>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>> news:43a3aac9$1@linux...
>>> > Well..........no workee with the Magma aND IRQ assignments and getting
>>> > squirrellier by the minute on current OS. I ghosted it and pulled the
>>> > drive. Now I have got a brand new WD 80G 8MB cache formatted and I
>>> installed
>>> > Win XP. Immediate problems with my Matrox graphics cards right after
> I
>>> > installed the VIA 4in1 drivers for the mobo. It's gonna be a
>>> > hellacious
>>> > weekend I'm afraid.
>>> >
>>> > ;o{
>>> >
>>> > "Kim" <hiddensounds@hotmail.com> wrote in message
>>news:43a39439$1@linux...
>>> > >
>>> > > "Aaron Allen" <nospam@not_here.dude> wrote:
>>> > > >You posted good vibes 'before` getting the Magma in and Paris
>>running?
>>> > > >Oh man, now you've done it..........
>>> > >
>>> > > Hehe... [snigger snigger]
>>> >
>>> >
>>>
>>>
>>
>>
>Some interesting info on RAM drives.
Report message to a moderator
|
|
|
|
|
|
Goto Forum:
Current Time: Thu Dec 26 22:04:21 PST 2024
Total time taken to generate the page: 0.01324 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
