Home » The PARIS Forums » PARIS: Main » UAD dropouts what the???....
| UAD dropouts what the???.... [message #99161] |
Tue, 10 June 2008 09:46  |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
I have recently been experiencing some dropouts on tracks with UAD plugs during
mixing. This hasn't happened before. There are no edits in the tracks in
question, and the dropouts, when the occur, tend to happen at the same place,
and on the same track, time after time, assuming I start playback in the
same place. This sounds like some sort of buffer mishap or something. Something
else is, I've noticed that if I look at the UAD meter, under config, the
sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid word
clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
4.9. Anybody had anything like this happen, or any thouoght about something
that I may be missing?
addendum
I just tried it again and rendered the bass track ( the one with droputs)
all the way to the beggining of the piece, so there are no spaces before
the track starts and there are no dropouts, at least for now. The drop out
happened at about 19 seconds, consistantly, before I did this.
errrrrrr!
|
|
|
|
| Re: UAD dropouts what the???.... [message #99162 is a reply to message #99161] |
Tue, 10 June 2008 10:08  |
|
|
Corrupted audio file? I recall PARIS is a bit twitchy about that sort of
thing.
- Kerry
On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
<rlincoln@nospam.kc.rr.com> wrote:
>
> I have recently been experiencing some dropouts on tracks with UAD plugs
> during
> mixing. This hasn't happened before. There are no edits in the tracks in
> question, and the dropouts, when the occur, tend to happen at the same place,
> and on the same track, time after time, assuming I start playback in the
> same place. This sounds like some sort of buffer mishap or something.
> Something
> else is, I've noticed that if I look at the UAD meter, under config, the
> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid word
> clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
> 4.9. Anybody had anything like this happen, or any thouoght about something
> that I may be missing?
> addendum
> I just tried it again and rendered the bass track ( the one with droputs)
> all the way to the beggining of the piece, so there are no spaces before
> the track starts and there are no dropouts, at least for now. The drop out
> happened at about 19 seconds, consistantly, before I did this.
> errrrrrr!
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
|
|
|
|
| Re: UAD dropouts what the???.... [message #99163 is a reply to message #99162] |
Tue, 10 June 2008 10:17 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
Or maybe fragmented files?
Erling
"Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
news:C474030B.B179%kg@kerrygalloway.com...
> Corrupted audio file? I recall PARIS is a bit twitchy about that sort of
> thing.
>
> - Kerry
>
>
> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
> <rlincoln@nospam.kc.rr.com> wrote:
>
>>
>> I have recently been experiencing some dropouts on tracks with UAD plugs
>> during
>> mixing. This hasn't happened before. There are no edits in the tracks in
>> question, and the dropouts, when the occur, tend to happen at the same
>> place,
>> and on the same track, time after time, assuming I start playback in the
>> same place. This sounds like some sort of buffer mishap or something.
>> Something
>> else is, I've noticed that if I look at the UAD meter, under config, the
>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>> word
>> clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>> 4.9. Anybody had anything like this happen, or any thouoght about
>> something
>> that I may be missing?
>> addendum
>> I just tried it again and rendered the bass track ( the one with droputs)
>> all the way to the beggining of the piece, so there are no spaces before
>> the track starts and there are no dropouts, at least for now. The drop
>> out
>> happened at about 19 seconds, consistantly, before I did this.
>> errrrrrr!
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99164 is a reply to message #99163] |
Tue, 10 June 2008 13:03 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Think so? I would think that paris would give me an "disk to slow" kind of
error if that were the case. Still, when I rendered the file, the problem
went away, so I suppose it's possible. thanks
Rod
"erlilo" <erlingl@tdcadsl.dk> wrote:
>Or maybe fragmented files?
>
>Erling
>
>"Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
>news:C474030B.B179%kg@kerrygalloway.com...
>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort
of
>> thing.
>>
>> - Kerry
>>
>>
>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>> <rlincoln@nospam.kc.rr.com> wrote:
>>
>>>
>>> I have recently been experiencing some dropouts on tracks with UAD plugs
>>> during
>>> mixing. This hasn't happened before. There are no edits in the tracks
in
>>> question, and the dropouts, when the occur, tend to happen at the same
>>> place,
>>> and on the same track, time after time, assuming I start playback in
the
>>> same place. This sounds like some sort of buffer mishap or something.
>>> Something
>>> else is, I've noticed that if I look at the UAD meter, under config,
the
>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>>> word
>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1
I'm
>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>> something
>>> that I may be missing?
>>> addendum
>>> I just tried it again and rendered the bass track ( the one with droputs)
>>> all the way to the beggining of the piece, so there are no spaces before
>>> the track starts and there are no dropouts, at least for now. The drop
>>> out
>>> happened at about 19 seconds, consistantly, before I did this.
>>> errrrrrr!
>>
>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99165 is a reply to message #99164] |
Tue, 10 June 2008 13:12 |
Cujjo
Messages: 325
Registered: June 2007
|
Senior Member |
|
|
I have had this before,. Rendering the track without native plugs seems to
help. Seems like certain plugs cause this more than others. same with the
pop at the end of a track.
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>Think so? I would think that paris would give me an "disk to slow" kind
of
>error if that were the case. Still, when I rendered the file, the problem
>went away, so I suppose it's possible. thanks
>Rod
>"erlilo" <erlingl@tdcadsl.dk> wrote:
>>Or maybe fragmented files?
>>
>>Erling
>>
>>"Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
>>news:C474030B.B179%kg@kerrygalloway.com...
>>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort
>of
>>> thing.
>>>
>>> - Kerry
>>>
>>>
>>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>>> <rlincoln@nospam.kc.rr.com> wrote:
>>>
>>>>
>>>> I have recently been experiencing some dropouts on tracks with UAD plugs
>>>> during
>>>> mixing. This hasn't happened before. There are no edits in the tracks
>in
>>>> question, and the dropouts, when the occur, tend to happen at the same
>
>>>> place,
>>>> and on the same track, time after time, assuming I start playback in
>the
>>>> same place. This sounds like some sort of buffer mishap or something.
>>>> Something
>>>> else is, I've noticed that if I look at the UAD meter, under config,
> the
>>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>
>>>> word
>>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1
>I'm
>>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>>> something
>>>> that I may be missing?
>>>> addendum
>>>> I just tried it again and rendered the bass track ( the one with droputs)
>>>> all the way to the beggining of the piece, so there are no spaces before
>>>> the track starts and there are no dropouts, at least for now. The drop
>
>>>> out
>>>> happened at about 19 seconds, consistantly, before I did this.
>>>> errrrrrr!
>>>
>>
>>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99166 is a reply to message #99163] |
Tue, 10 June 2008 16:10 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
I usually don't render my files before bouncing down. I haven't had a
problem like this, even with extensive editing, segmenting, etc. Is
rendering something that "should be" done before mixdown? Using PARIS 3.
Thanks,
Edna
"erlilo" <erlingl@tdcadsl.dk> wrote in message news:484eb959@linux...
> Or maybe fragmented files?
>
> Erling
>
> "Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
> news:C474030B.B179%kg@kerrygalloway.com...
>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort of
>> thing.
>>
>> - Kerry
>>
>>
>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>> <rlincoln@nospam.kc.rr.com> wrote:
>>
>>>
>>> I have recently been experiencing some dropouts on tracks with UAD plugs
>>> during
>>> mixing. This hasn't happened before. There are no edits in the tracks in
>>> question, and the dropouts, when the occur, tend to happen at the same
>>> place,
>>> and on the same track, time after time, assuming I start playback in the
>>> same place. This sounds like some sort of buffer mishap or something.
>>> Something
>>> else is, I've noticed that if I look at the UAD meter, under config,
>>> the
>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>>> word
>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>> something
>>> that I may be missing?
>>> addendum
>>> I just tried it again and rendered the bass track ( the one with
>>> droputs)
>>> all the way to the beggining of the piece, so there are no spaces before
>>> the track starts and there are no dropouts, at least for now. The drop
>>> out
>>> happened at about 19 seconds, consistantly, before I did this.
>>> errrrrrr!
>>
>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99168 is a reply to message #99165] |
Tue, 10 June 2008 17:07 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
OK, glad to know I'm alone. It's just wierd that I've been going this long
and never seen this till now. Rendering without native plugs did the trick
this time. I hope it's always as easy as that.
Rod
"Cujo" <chris@applemanstudio.com> wrote:
>
>
>I have had this before,. Rendering the track without native plugs seems
to
>help. Seems like certain plugs cause this more than others. same with the
>pop at the end of a track.
>
>
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>
>>Think so? I would think that paris would give me an "disk to slow" kind
>of
>>error if that were the case. Still, when I rendered the file, the problem
>>went away, so I suppose it's possible. thanks
>>Rod
>>"erlilo" <erlingl@tdcadsl.dk> wrote:
>>>Or maybe fragmented files?
>>>
>>>Erling
>>>
>>>"Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
>>>news:C474030B.B179%kg@kerrygalloway.com...
>>>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort
>>of
>>>> thing.
>>>>
>>>> - Kerry
>>>>
>>>>
>>>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>>>> <rlincoln@nospam.kc.rr.com> wrote:
>>>>
>>>>>
>>>>> I have recently been experiencing some dropouts on tracks with UAD
plugs
>>>>> during
>>>>> mixing. This hasn't happened before. There are no edits in the tracks
>>in
>>>>> question, and the dropouts, when the occur, tend to happen at the same
>>
>>>>> place,
>>>>> and on the same track, time after time, assuming I start playback in
>>the
>>>>> same place. This sounds like some sort of buffer mishap or something.
>>>>> Something
>>>>> else is, I've noticed that if I look at the UAD meter, under config,
>> the
>>>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>>
>>>>> word
>>>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1
>>I'm
>>>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>>>> something
>>>>> that I may be missing?
>>>>> addendum
>>>>> I just tried it again and rendered the bass track ( the one with droputs)
>>>>> all the way to the beggining of the piece, so there are no spaces before
>>>>> the track starts and there are no dropouts, at least for now. The drop
>>
>>>>> out
>>>>> happened at about 19 seconds, consistantly, before I did this.
>>>>> errrrrrr!
>>>>
>>>
>>>
>>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99169 is a reply to message #99168] |
Tue, 10 June 2008 17:08 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
errrr I mean, glad to know I'm NOT alone 8^P
rod
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>OK, glad to know I'm alone. It's just wierd that I've been going this long
>and never seen this till now. Rendering without native plugs did the trick
>this time. I hope it's always as easy as that.
>Rod
>"Cujo" <chris@applemanstudio.com> wrote:
>>
>>
>>I have had this before,. Rendering the track without native plugs seems
>to
>>help. Seems like certain plugs cause this more than others. same with the
>>pop at the end of a track.
>>
>>
>>
>>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>>
>>>Think so? I would think that paris would give me an "disk to slow" kind
>>of
>>>error if that were the case. Still, when I rendered the file, the problem
>>>went away, so I suppose it's possible. thanks
>>>Rod
>>>"erlilo" <erlingl@tdcadsl.dk> wrote:
>>>>Or maybe fragmented files?
>>>>
>>>>Erling
>>>>
>>>>"Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
>>>>news:C474030B.B179%kg@kerrygalloway.com...
>>>>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort
>>>of
>>>>> thing.
>>>>>
>>>>> - Kerry
>>>>>
>>>>>
>>>>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>>>>> <rlincoln@nospam.kc.rr.com> wrote:
>>>>>
>>>>>>
>>>>>> I have recently been experiencing some dropouts on tracks with UAD
>plugs
>>>>>> during
>>>>>> mixing. This hasn't happened before. There are no edits in the tracks
>>>in
>>>>>> question, and the dropouts, when the occur, tend to happen at the
same
>>>
>>>>>> place,
>>>>>> and on the same track, time after time, assuming I start playback
in
>>>the
>>>>>> same place. This sounds like some sort of buffer mishap or something.
>>>>>> Something
>>>>>> else is, I've noticed that if I look at the UAD meter, under config,
>>> the
>>>>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my
Lucid
>>>
>>>>>> word
>>>>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1
>>>I'm
>>>>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>>>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>>>>> something
>>>>>> that I may be missing?
>>>>>> addendum
>>>>>> I just tried it again and rendered the bass track ( the one with droputs)
>>>>>> all the way to the beggining of the piece, so there are no spaces
before
>>>>>> the track starts and there are no dropouts, at least for now. The
drop
>>>
>>>>>> out
>>>>>> happened at about 19 seconds, consistantly, before I did this.
>>>>>> errrrrrr!
>>>>>
>>>>
>>>>
>>>
>>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99170 is a reply to message #99166] |
Tue, 10 June 2008 17:17 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
If your not esperiencing any problems, then, no. No rendering is needed.
Rod
"Edna" <edna@texomaonline.com> wrote:
>I usually don't render my files before bouncing down. I haven't had a
>problem like this, even with extensive editing, segmenting, etc. Is
>rendering something that "should be" done before mixdown? Using PARIS 3.
>Thanks,
>Edna
>
>"erlilo" <erlingl@tdcadsl.dk> wrote in message news:484eb959@linux...
>> Or maybe fragmented files?
>>
>> Erling
>>
>> "Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
>> news:C474030B.B179%kg@kerrygalloway.com...
>>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort
of
>>> thing.
>>>
>>> - Kerry
>>>
>>>
>>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>>> <rlincoln@nospam.kc.rr.com> wrote:
>>>
>>>>
>>>> I have recently been experiencing some dropouts on tracks with UAD plugs
>>>> during
>>>> mixing. This hasn't happened before. There are no edits in the tracks
in
>>>> question, and the dropouts, when the occur, tend to happen at the same
>>>> place,
>>>> and on the same track, time after time, assuming I start playback in
the
>>>> same place. This sounds like some sort of buffer mishap or something.
>>>> Something
>>>> else is, I've noticed that if I look at the UAD meter, under config,
>>>> the
>>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>>>> word
>>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1
I'm
>>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>>> something
>>>> that I may be missing?
>>>> addendum
>>>> I just tried it again and rendered the bass track ( the one with
>>>> droputs)
>>>> all the way to the beggining of the piece, so there are no spaces before
>>>> the track starts and there are no dropouts, at least for now. The drop
>>>> out
>>>> happened at about 19 seconds, consistantly, before I did this.
>>>> errrrrrr!
>>>
>>
>>
>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99176 is a reply to message #99170] |
Tue, 10 June 2008 21:23 |
Cujjo
Messages: 325
Registered: June 2007
|
Senior Member |
|
|
Well, it has happened to me whne I didn;t notice till later, like a bass
note dropping out that did not occur the 76 times I heard the song while
mixing..So, on final bounce, I hit D and go out of the room so as not to
want to tweak anymore, burn the file to CD for the band and find out it had
that drop out later..which is annoying.
Honestly, I think it has something to do with the beginning of the file not
going all the way to the front of the project.
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>If your not esperiencing any problems, then, no. No rendering is needed.
>Rod
>"Edna" <edna@texomaonline.com> wrote:
>>I usually don't render my files before bouncing down. I haven't had a
>>problem like this, even with extensive editing, segmenting, etc. Is
>>rendering something that "should be" done before mixdown? Using PARIS
3.
>>Thanks,
>>Edna
>>
>>"erlilo" <erlingl@tdcadsl.dk> wrote in message news:484eb959@linux...
>>> Or maybe fragmented files?
>>>
>>> Erling
>>>
>>> "Kerry Galloway" <kg@kerrygalloway.com> skrev i en meddelelse
>>> news:C474030B.B179%kg@kerrygalloway.com...
>>>> Corrupted audio file? I recall PARIS is a bit twitchy about that sort
>of
>>>> thing.
>>>>
>>>> - Kerry
>>>>
>>>>
>>>> On 6/10/08 9:46 AM, in article 484eafdc$1@linux, "Rod Lincoln"
>>>> <rlincoln@nospam.kc.rr.com> wrote:
>>>>
>>>>>
>>>>> I have recently been experiencing some dropouts on tracks with UAD
plugs
>>>>> during
>>>>> mixing. This hasn't happened before. There are no edits in the tracks
>in
>>>>> question, and the dropouts, when the occur, tend to happen at the same
>
>>>>> place,
>>>>> and on the same track, time after time, assuming I start playback in
>the
>>>>> same place. This sounds like some sort of buffer mishap or something.
>>>>> Something
>>>>> else is, I've noticed that if I look at the UAD meter, under config,
>
>>>>> the
>>>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>
>>>>> word
>>>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1
>I'm
>>>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>>>> something
>>>>> that I may be missing?
>>>>> addendum
>>>>> I just tried it again and rendered the bass track ( the one with
>>>>> droputs)
>>>>> all the way to the beggining of the piece, so there are no spaces before
>>>>> the track starts and there are no dropouts, at least for now. The drop
>
>>>>> out
>>>>> happened at about 19 seconds, consistantly, before I did this.
>>>>> errrrrrr!
>>>>
>>>
>>>
>>
>>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99178 is a reply to message #99161] |
Tue, 10 June 2008 21:44 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
It's possible you have a visual glitch and can't see correctly the segments
that 'should' be touching each other aren't at a splice. I've had this
happen before. Rendering usually handles it. Did you let 17/18 show at any
point on your editor? This can cause just such a 'glitch'. BT said that if
you close and reopen the editor it fixes it.
AA
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:484eafdc$1@linux...
>
> I have recently been experiencing some dropouts on tracks with UAD plugs
> during
> mixing. This hasn't happened before. There are no edits in the tracks in
> question, and the dropouts, when the occur, tend to happen at the same
> place,
> and on the same track, time after time, assuming I start playback in the
> same place. This sounds like some sort of buffer mishap or something.
> Something
> else is, I've noticed that if I look at the UAD meter, under config, the
> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
> word
> clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
> 4.9. Anybody had anything like this happen, or any thouoght about
> something
> that I may be missing?
> addendum
> I just tried it again and rendered the bass track ( the one with droputs)
> all the way to the beggining of the piece, so there are no spaces before
> the track starts and there are no dropouts, at least for now. The drop out
> happened at about 19 seconds, consistantly, before I did this.
> errrrrrr!
|
|
|
|
| Re: UAD dropouts what the???.... [message #99181 is a reply to message #99178] |
Tue, 10 June 2008 22:31 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
No, edits at all. It was a complete file imported into the project. 17/18
are showing but the space below them is not, is that what you mean. I've
never heard about 17/18, just the space below them.
Rod
"Aaron Allen" <know-spam@not_here.dude> wrote:
>It's possible you have a visual glitch and can't see correctly the segments
>that 'should' be touching each other aren't at a splice. I've had this
>happen before. Rendering usually handles it. Did you let 17/18 show at any
>point on your editor? This can cause just such a 'glitch'. BT said that
if
>you close and reopen the editor it fixes it.
>
>AA
>
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>news:484eafdc$1@linux...
>>
>> I have recently been experiencing some dropouts on tracks with UAD plugs
>> during
>> mixing. This hasn't happened before. There are no edits in the tracks
in
>> question, and the dropouts, when the occur, tend to happen at the same
>> place,
>> and on the same track, time after time, assuming I start playback in the
>> same place. This sounds like some sort of buffer mishap or something.
>> Something
>> else is, I've noticed that if I look at the UAD meter, under config,
the
>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>> word
>> clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>> 4.9. Anybody had anything like this happen, or any thouoght about
>> something
>> that I may be missing?
>> addendum
>> I just tried it again and rendered the bass track ( the one with droputs)
>> all the way to the beggining of the piece, so there are no spaces before
>> the track starts and there are no dropouts, at least for now. The drop
out
>> happened at about 19 seconds, consistantly, before I did this.
>> errrrrrr!
>
>
|
|
|
|
| Re: UAD dropouts what the???.... [message #99182 is a reply to message #99181] |
Tue, 10 June 2008 23:38 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
>I've never heard about 17/18, just the space below them.
Of course you're right. Apologies man, I know better than to post anything
after a nutcrusher 14 hour day gig shift (fiber installs using wire
strippers, sheesh.....)
No edits, at all? That is odd dude. Even more odd that a render fixed it.
Kerry's probably right about it being a slight corruption in the audio file.
My guess is windows 'fixed' it on bounce
AA
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:484f632b$1@linux...
>
> No, edits at all. It was a complete file imported into the project. 17/18
> are showing but the space below them is not, is that what you mean. I've
> never heard about 17/18, just the space below them.
> Rod
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>It's possible you have a visual glitch and can't see correctly the
>>segments
>
>>that 'should' be touching each other aren't at a splice. I've had this
>>happen before. Rendering usually handles it. Did you let 17/18 show at any
>
>>point on your editor? This can cause just such a 'glitch'. BT said that
> if
>>you close and reopen the editor it fixes it.
>>
>>AA
>>
>>
>>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>>news:484eafdc$1@linux...
>>>
>>> I have recently been experiencing some dropouts on tracks with UAD plugs
>
>>> during
>>> mixing. This hasn't happened before. There are no edits in the tracks
> in
>>> question, and the dropouts, when the occur, tend to happen at the same
>
>>> place,
>>> and on the same track, time after time, assuming I start playback in the
>>> same place. This sounds like some sort of buffer mishap or something.
>
>>> Something
>>> else is, I've noticed that if I look at the UAD meter, under config,
> the
>>> sample rate reads 48k. I'm mixing at 44.1 with bothe Paris AND my Lucid
>
>>> word
>>> clock set at 44.1. If I reboot, this will usuall change back to 44.1 I'm
>>> running 3 UAD cards and 6 eds cards, all in a magma chassis. UAD version
>>> 4.9. Anybody had anything like this happen, or any thouoght about
>>> something
>>> that I may be missing?
>>> addendum
>>> I just tried it again and rendered the bass track ( the one with
>>> droputs)
>>> all the way to the beggining of the piece, so there are no spaces before
>>> the track starts and there are no dropouts, at least for now. The drop
> out
>>> happened at about 19 seconds, consistantly, before I did this.
>>> errrrrrr!
>>
>>
>
|
|
|
|
Goto Forum:
Current Time: Wed Nov 27 09:35:20 PST 2024
Total time taken to generate the page: 0.03494 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
