The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » Novice Question

Show: Today's Messages :: Polls :: Message Navigator

Novice Question [message #64517]

Mon, 13 February 2006 17:14

Sanbar

Messages: 37
Registered: July 2005

Member

If I am going to insert hardware components (compressors, etc) into the
individual channels do I need the output units or how is this done. I'm used
to only working with software.

Thanks

Barry

Report message to a moderator

Re: Novice Question [message #64522 is a reply to message #64517]

Mon, 13 February 2006 19:46

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

In order to insert external hardware on a playback track,
you have to connect the input of the external device to a
physical output on the 442, MEC or output modules. The
output of the external device is then patched to a matching
input on the same 442, MEC etc to complete the loop. In the
Paris patchbay, you make the software connection for the
insert point. The track insert EDS effect "External" would
also need to be selected to make this work.

What is your Paris hardware compliment?

David.

Sanbar wrote:
> If I am going to insert hardware components (compressors, etc) into the
> individual channels do I need the output units or how is this done. I'm used
> to only working with software.
>
> Thanks
>
> Barry
>
>

Report message to a moderator

Re: Novice Question [message #64528 is a reply to message #64522]

Tue, 14 February 2006 06:44

Sanbar

Messages: 37
Registered: July 2005

Member

Don't have one yet, but am considering some sort of compressor.

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
news:43f153f9$1@linux...
> In order to insert external hardware on a playback track,
> you have to connect the input of the external device to a
> physical output on the 442, MEC or output modules. The
> output of the external device is then patched to a matching
> input on the same 442, MEC etc to complete the loop. In the
> Paris patchbay, you make the software connection for the
> insert point. The track insert EDS effect "External" would
> also need to be selected to make this work.
>
> What is your Paris hardware compliment?
>
> David.
>
> Sanbar wrote:
> > If I am going to insert hardware components (compressors, etc) into the
> > individual channels do I need the output units or how is this done. I'm
used
> > to only working with software.
> >
> > Thanks
> >
> > Barry
> >
> >

Report message to a moderator

Previous Topic:	Pops when monitoring Cubase Midi in Paris
Next Topic:	Can't get my new Athlon 64 to Overclock... any ideas?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jan 16 05:58:05 PST 2025

Total time taken to generate the page: 0.01354 seconds