Home » The PARIS Forums » PARIS: Main » Will this MOBO run Paris XP ?
|
|
|
|
| Re: Will this MOBO run Paris XP ? [message #98247 is a reply to message #98241] |
Fri, 25 April 2008 20:03   |
excelav
Messages: 2130
Registered: July 2005
Location: Metro Detroit
|
Senior Member |
|
|
Thanks Aaron! This is the MOBO I'm currently running with a P4 2.4GHz. It's
in a Antec tower with a Antec 400 watt SmartPower power supply. There is
some issues with memory with this MOBO, so I'm running only 512 k, I think
it's Kingston memory. PCI slots are standard 133.
When I have time I'm going to wipe a 160 GB drive to start fresh and install
Paris on XP. Do you think I should go with server pack 1 or 2?
"Aaron Allen" <know-spam@not_here.dude> wrote:
>Looks like it should, but shut off the CPU hyperthreading in the BIOS. Other
>things to kill are serial/LPT ports, USB and onboard audio if you're
>planning on loading the PCI slots. If you're not using networking, kill
that
>also in the BIOS. These are not 'have to' things, but with 6 PCI slots I
bet
>there's a lot of PCI sharing going on.... and that can mean troubles.
>
>That brings my next question: what PCI spec are those slots, the web page
>didn't say. They look to be keyed properly in the photo FWIW, but I'd
>confirm it.
>
>Don't buy a cheap power supply, get something decent. Ditto the RAM. I buy
>only Crucial RAM (www.crucial.com) unless a mobo manufacturer specifically
>demands something else.
>
>AA
>
>
>"James McCloskey" <excelsm@hotmail.com> wrote in message
>news:481213dc$1@linux...
>>
>> Will this MOBO run Paris XP ?
>>
>> MSI 648F Neo MS-6585
>>
>> http://www.msicomputer.com/product/p_spec.asp?model=648F_Neo -L
>
>
|
|
|
|
| Re: Will this MOBO run Paris XP ? [message #98250 is a reply to message #98247] |
Fri, 25 April 2008 21:04 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_001C_01C8A728.B4AF58E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I use SP1 w/o any troubles. I didn't see anything of real value to a DAW =
in SP2. However, my machine will not ever be an internet machine. Keep =
it lean, clean and focused on DAW duties.=20
What I meant by PCI slots is what spec...... 2.1, 2.2, 2.3?
I would definitely dump the Kingston. Get whatever the manufacturer said =
to get for that model. If you can't find what they spec'd anymore go to =
www.crucial.com and get what they say to get. Get a matched pair of =
512's, they're cheaper than yard dirt these days, and a GB is plenty to =
run ParisXP. www.musicxp.net will have some good optimization tips, =
also.=20
An antec 400 is 'probably' good for 2, maybe 3 EDS cards. No more IMO, =
of course depending on what other stuff you have on it. As you add more =
hard drives and CD/DVD drives, be aware of power drain. FWIW, Brian T =
didn't even had a optical CD/DVD drive in his DAW. He fed out via =
removable FW drives. Extras create extra possible headaches. Get it =
built as a solid system, then you can add stuff. Be methodical, move =
slowly and you'll be a heck of a lot less likely to pull your hair out =
chasing any ghosts.=20
Now, you are going to use a separate audio drive, right? (grandfatherly =
voice)
Memory writes, caching and the such make recording to the OS drive =
generally a bad idea, no matter who's OS.=20
Oh, you didn't say but if that's not an nVidia video card, I'd dump it =
based on my past experiences. Get at minimum 64 MB vid ram per screen =
output, more if you can. Paris loves it some nVidia/GeForce. Don't load =
a bunch of video card/gaming crapware, keep it simple 'n' clean. Native =
XP drivers if they exist. Try TXmicro.com or something similar for =
surplus cards, again priced like dirt these days for AGP but soon you =
won't be able to find those vintage parts.=20
Buy Norton Ghost, or Acronis True Image. Use it. Believe me now or =
believe me later on that.=20
AA
"James McCloskey" <excelsm@hotmail.com> wrote in message =
news:48129b64$1@linux...
>=20
> Thanks Aaron! This is the MOBO I'm currently running with a P4 =
2.4GHz. It's
> in a Antec tower with a Antec 400 watt SmartPower power supply. There =
is
> some issues with memory with this MOBO, so I'm running only 512 k, I =
think
> it's Kingston memory. PCI slots are standard 133. =20
>=20
> When I have time I'm going to wipe a 160 GB drive to start fresh and =
install
> Paris on XP. Do you think I should go with server pack 1 or 2?
>=20
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>Looks like it should, but shut off the CPU hyperthreading in the BIOS. =
Other
>=20
>>things to kill are serial/LPT ports, USB and onboard audio if you're=20
>>planning on loading the PCI slots. If you're not using networking, =
kill
> that=20
>>also in the BIOS. These are not 'have to' things, but with 6 PCI slots =
I
> bet=20
>>there's a lot of PCI sharing going on.... and that can mean troubles.
>>
>>That brings my next question: what PCI spec are those slots, the web =
page
>=20
>>didn't say. They look to be keyed properly in the photo FWIW, but I'd=20
>>confirm it.
>>
>>Don't buy a cheap power supply, get something decent. Ditto the RAM. I =
buy
>=20
>>only Crucial RAM (www.crucial.com) unless a mobo manufacturer =
specifically
>=20
>>demands something else.
>>
>>AA
>>
>>
>>"James McCloskey" <excelsm@hotmail.com> wrote in message=20
>>news:481213dc$1@linux...
>>>
>>> Will this MOBO run Paris XP ?
>>>
>>> MSI 648F Neo MS-6585
>>>
>>> http://www.msicomputer.com/product/p_spec.asp?model=3D648F_N eo-L=20
>>
>>
>
------=_NextPart_000_001C_01C8A728.B4AF58E0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16640" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2>I use SP1 w/o any troubles. I didn't =
see anything=20
of real value to a DAW in SP2. However, my machine will not ever be =
an=20
internet machine. Keep it lean, clean and focused on DAW duties. =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>What I meant by PCI slots is what =
spec...... 2.1,=20
2.2, 2.3?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I would definitely dump the Kingston. =
Get whatever=20
the manufacturer said to get for that model. If you can't find what they =
spec'd=20
anymore go to </FONT><A href=3D"http://www.crucial.com"><FONT =
face=3DArial=20
size=3D2>www.crucial.com</FONT></A><FONT face=3DArial size=3D2> and get =
<A=20
href=3D" http://www.crucial.com/store/listparts.aspx?model=3DMS-6585% 20V5.=
0%20%28648F%20Neo%29">what=20
they say to get</A>. Get a matched pair of 512's, they're cheaper than =
yard dirt=20
these days, and a GB is plenty to run ParisXP. </FONT><A=20
href=3D"http://www.musicxp.net"><FONT face=3DArial=20
size=3D2>www.musicxp.net</FONT></A><FONT face=3DArial size=3D2> will =
have some good=20
optimization tips, also. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>An antec 400 is 'probably' good for 2, =
maybe 3 EDS=20
cards. No more IMO, of course depending on what other stuff you have on =
it. As=20
you add more hard drives and CD/DVD drives, be aware of power drain. =
FWIW, Brian=20
T didn't even had a optical CD/DVD drive in his DAW. He fed out via =
removable FW=20
drives. Extras create extra possible headaches. Get it built as a solid =
system,=20
then you can add stuff. Be methodical, move slowly and you'll be a heck =
of a lot=20
less likely to pull your hair out chasing any ghosts. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Now, you are going to use a separate =
audio drive,=20
right? (grandfatherly voice)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Memory writes, caching and the such =
make recording=20
to the OS drive generally a bad idea, no matter who's OS. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Oh, you didn't say but if that's not an =
nVidia=20
video card, I'd dump it based on my past experiences. Get=20
at minimum 64 MB vid ram per screen output, more if you can. =
Paris=20
loves it some nVidia/GeForce. Don't load a bunch of video card/gaming =
crapware,=20
keep it simple 'n' clean. Native XP drivers if they exist. Try =
TXmicro.com or=20
something similar for surplus cards, again priced like dirt these days=20
for AGP but soon you won't be able to find those vintage parts.=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Buy Norton Ghost, or Acronis True =
Image. Use it.=20
Believe me now or believe me later on that. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>AA</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>"James McCloskey" <</FONT><A=20
href=3D"mailto:excelsm@hotmail.com"><FONT face=3DArial=20
size=3D2>excelsm@hotmail.com</FONT></A><FONT face=3DArial size=3D2>> =
wrote in=20
message </FONT><A href=3D"news:48129b64$1@linux"><FONT face=3DArial=20
size=3D2>news:48129b64$1@linux</FONT></A><FONT face=3DArial=20
size=3D2>...</FONT></DIV><FONT face=3DArial size=3D2>> <BR>> =
Thanks Aaron! =20
This is the MOBO I'm currently running with a P4 2.4GHz. It's<BR>> in =
a Antec=20
tower with a Antec 400 watt SmartPower power supply. There =
is<BR>> some=20
issues with memory with this MOBO, so I'm running only 512 k, I =
think<BR>>=20
it's Kingston memory. PCI slots are standard 133. <BR>> =
<BR>>=20
When I have time I'm going to wipe a 160 GB drive to start fresh and=20
install<BR>> Paris on XP. Do you think I should go with server =
pack 1=20
or 2?<BR>> <BR>> "Aaron Allen" <</FONT><A=20
href=3D"mailto:know-spam@not_here.dude"><FONT face=3DArial=20
size=3D2>know-spam@not_here.dude</FONT></A><FONT face=3DArial =
size=3D2>>=20
wrote:<BR>>>Looks like it should, but shut off the CPU =
hyperthreading in=20
the BIOS. Other<BR>> <BR>>>things to kill are serial/LPT ports, =
USB and=20
onboard audio if you're <BR>>>planning on loading the PCI slots. =
If you're=20
not using networking, kill<BR>> that <BR>>>also in the BIOS. =
These are=20
not 'have to' things, but with 6 PCI slots I<BR>> bet =
<BR>>>there's a=20
lot of PCI sharing going on.... and that can mean=20
troubles.<BR>>><BR>>>That brings my next question: what PCI =
spec are=20
those slots, the web page<BR>> <BR>>>didn't say. They look to =
be keyed=20
properly in the photo FWIW, but I'd <BR>>>confirm=20
it.<BR>>><BR>>>Don't buy a cheap power supply, get something =
decent.=20
Ditto the RAM. I buy<BR>> <BR>>>only Crucial RAM (</FONT><A=20
href=3D"http://www.crucial.com"><FONT face=3DArial=20
size=3D2>www.crucial.com</FONT></A><FONT face=3DArial size=3D2>) unless =
a mobo=20
manufacturer specifically<BR>> <BR>>>demands something=20
else.<BR>>><BR>>>AA<BR>>> <BR>>><BR>>>"James=
=20
McCloskey" <</FONT><A href=3D"mailto:excelsm@hotmail.com"><FONT =
face=3DArial=20
size=3D2>excelsm@hotmail.com</FONT></A><FONT face=3DArial size=3D2>> =
wrote in=20
message =
<BR>>>news:481213dc$1@linux...<BR>>>><BR>>>>=20
Will this MOBO run Paris XP ?<BR>>>><BR>>>> MSI 648F =
Neo=20
MS-6585<BR>>>><BR>>>> </FONT><A=20
href=3D" http://www.msicomputer.com/product/p_spec.asp?model=3D648F_N eo-L"=
><FONT=20
face=3DArial=20
size=3D2> http://www.msicomputer.com/product/p_spec.asp?model=3D648F_N eo-L=
</FONT></A><FONT=20
face=3DArial size=3D2> =
<BR>>><BR>>><BR>></FONT ></BODY></HTML>
------=_NextPart_000_001C_01C8A728.B4AF58E0--
|
|
|
|
| Re: Will this MOBO run Paris XP ? [message #98324 is a reply to message #98250] |
Tue, 29 April 2008 08:12 |
Chris Ludwig
Messages: 868
Registered: May 2006
|
Senior Member |
|
|
Hi Aaron,
The new Norton Ghost sucks balls! :)
Acronis True Image 11 is excellent as well as Paragon drive back up.
Paragon is probably a bit to techie for most folks though.
Chris
Aaron Allen wrote:
> I use SP1 w/o any troubles. I didn't see anything of real value to a DAW
> in SP2. However, my machine will not ever be an internet machine. Keep
> it lean, clean and focused on DAW duties.
>
> What I meant by PCI slots is what spec...... 2.1, 2.2, 2.3?
>
> I would definitely dump the Kingston. Get whatever the manufacturer said
> to get for that model. If you can't find what they spec'd anymore go to
> www.crucial.com <http://www.crucial.com> and get what they say to get
> < http://www.crucial.com/store/listparts.aspx?model=MS-6585%20 V5.0%20%28648F%20Neo%29>.
> Get a matched pair of 512's, they're cheaper than yard dirt these days,
> and a GB is plenty to run ParisXP. www.musicxp.net
> <http://www.musicxp.net> will have some good optimization tips, also.
>
> An antec 400 is 'probably' good for 2, maybe 3 EDS cards. No more IMO,
> of course depending on what other stuff you have on it. As you add more
> hard drives and CD/DVD drives, be aware of power drain. FWIW, Brian T
> didn't even had a optical CD/DVD drive in his DAW. He fed out via
> removable FW drives. Extras create extra possible headaches. Get it
> built as a solid system, then you can add stuff. Be methodical, move
> slowly and you'll be a heck of a lot less likely to pull your hair out
> chasing any ghosts.
>
> Now, you are going to use a separate audio drive, right? (grandfatherly
> voice)
> Memory writes, caching and the such make recording to the OS drive
> generally a bad idea, no matter who's OS.
>
> Oh, you didn't say but if that's not an nVidia video card, I'd dump it
> based on my past experiences. Get at minimum 64 MB vid ram per screen
> output, more if you can. Paris loves it some nVidia/GeForce. Don't load
> a bunch of video card/gaming crapware, keep it simple 'n' clean. Native
> XP drivers if they exist. Try TXmicro.com or something similar for
> surplus cards, again priced like dirt these days for AGP but soon you
> won't be able to find those vintage parts.
>
> Buy Norton Ghost, or Acronis True Image. Use it. Believe me now or
> believe me later on that.
>
> AA
>
>
>
> "James McCloskey" <excelsm@hotmail.com <mailto:excelsm@hotmail.com>>
> wrote in message news:48129b64$1@linux...
> >
> > Thanks Aaron! This is the MOBO I'm currently running with a P4
> 2.4GHz. It's
> > in a Antec tower with a Antec 400 watt SmartPower power supply. There is
> > some issues with memory with this MOBO, so I'm running only 512 k, I
> think
> > it's Kingston memory. PCI slots are standard 133.
> >
> > When I have time I'm going to wipe a 160 GB drive to start fresh and
> install
> > Paris on XP. Do you think I should go with server pack 1 or 2?
> >
> > "Aaron Allen" <know-spam@not_here.dude
> <mailto:know-spam@not_here.dude>> wrote:
> >>Looks like it should, but shut off the CPU hyperthreading in the
> BIOS. Other
> >
> >>things to kill are serial/LPT ports, USB and onboard audio if you're
> >>planning on loading the PCI slots. If you're not using networking, kill
> > that
> >>also in the BIOS. These are not 'have to' things, but with 6 PCI slots I
> > bet
> >>there's a lot of PCI sharing going on.... and that can mean troubles.
> >>
> >>That brings my next question: what PCI spec are those slots, the web page
> >
> >>didn't say. They look to be keyed properly in the photo FWIW, but I'd
> >>confirm it.
> >>
> >>Don't buy a cheap power supply, get something decent. Ditto the RAM.
> I buy
> >
> >>only Crucial RAM (www.crucial.com <http://www.crucial.com>) unless a
> mobo manufacturer specifically
> >
> >>demands something else.
> >>
> >>AA
> >>
> >>
> >>"James McCloskey" <excelsm@hotmail.com <mailto:excelsm@hotmail.com>>
> wrote in message
> >>news:481213dc$1@linux...
> >>>
> >>> Will this MOBO run Paris XP ?
> >>>
> >>> MSI 648F Neo MS-6585
> >>>
> >>> http://www.msicomputer.com/product/p_spec.asp?model=648F_Neo -L
> >>
> >>
> >
--
Chris Ludwig
ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com
|
|
|
|
| Re: Will this MOBO run Paris XP ? [message #98325 is a reply to message #98324] |
Tue, 29 April 2008 11:01 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
sad, yet not surprising. Norton fouled up everything else they do I guess it
was a matter of time.
AA
"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:48173d05$1@linux...
> Hi Aaron,
> The new Norton Ghost sucks balls! :)
> Acronis True Image 11 is excellent as well as Paragon drive back up.
> Paragon is probably a bit to techie for most folks though.
>
> Chris
>
>
> Aaron Allen wrote:
>> I use SP1 w/o any troubles. I didn't see anything of real value to a DAW
>> in SP2. However, my machine will not ever be an internet machine. Keep it
>> lean, clean and focused on DAW duties.
>> What I meant by PCI slots is what spec...... 2.1, 2.2, 2.3?
>> I would definitely dump the Kingston. Get whatever the manufacturer said
>> to get for that model. If you can't find what they spec'd anymore go to
>> www.crucial.com <http://www.crucial.com> and get what they say to get
>> < http://www.crucial.com/store/listparts.aspx?model=MS-6585%20 V5.0%20%28648F%20Neo%29>.
>> Get a matched pair of 512's, they're cheaper than yard dirt these days,
>> and a GB is plenty to run ParisXP. www.musicxp.net
>> <http://www.musicxp.net> will have some good optimization tips, also.
>> An antec 400 is 'probably' good for 2, maybe 3 EDS cards. No more IMO,
>> of course depending on what other stuff you have on it. As you add more
>> hard drives and CD/DVD drives, be aware of power drain. FWIW, Brian T
>> didn't even had a optical CD/DVD drive in his DAW. He fed out via
>> removable FW drives. Extras create extra possible headaches. Get it built
>> as a solid system, then you can add stuff. Be methodical, move slowly and
>> you'll be a heck of a lot less likely to pull your hair out chasing any
>> ghosts.
>> Now, you are going to use a separate audio drive, right? (grandfatherly
>> voice)
>> Memory writes, caching and the such make recording to the OS drive
>> generally a bad idea, no matter who's OS.
>> Oh, you didn't say but if that's not an nVidia video card, I'd dump it
>> based on my past experiences. Get at minimum 64 MB vid ram per screen
>> output, more if you can. Paris loves it some nVidia/GeForce. Don't load a
>> bunch of video card/gaming crapware, keep it simple 'n' clean. Native XP
>> drivers if they exist. Try TXmicro.com or something similar for surplus
>> cards, again priced like dirt these days for AGP but soon you won't be
>> able to find those vintage parts.
>> Buy Norton Ghost, or Acronis True Image. Use it. Believe me now or
>> believe me later on that.
>> AA
>> "James McCloskey" <excelsm@hotmail.com <mailto:excelsm@hotmail.com>>
>> wrote in message news:48129b64$1@linux...
>> >
>> > Thanks Aaron! This is the MOBO I'm currently running with a P4
>> 2.4GHz. It's
>> > in a Antec tower with a Antec 400 watt SmartPower power supply. There
>> is
>> > some issues with memory with this MOBO, so I'm running only 512 k, I
>> think
>> > it's Kingston memory. PCI slots are standard 133. >
>> > When I have time I'm going to wipe a 160 GB drive to start fresh and
>> install
>> > Paris on XP. Do you think I should go with server pack 1 or 2?
>> >
>> > "Aaron Allen" <know-spam@not_here.dude
>> <mailto:know-spam@not_here.dude>> wrote:
>> >>Looks like it should, but shut off the CPU hyperthreading in the BIOS.
>> Other
>> >
>> >>things to kill are serial/LPT ports, USB and onboard audio if you're
>> >>planning on loading the PCI slots. If you're not using networking,
>> kill
>> > that
>> >>also in the BIOS. These are not 'have to' things, but with 6 PCI slots
>> I
>> > bet
>> >>there's a lot of PCI sharing going on.... and that can mean troubles.
>> >>
>> >>That brings my next question: what PCI spec are those slots, the web
>> page
>> >
>> >>didn't say. They look to be keyed properly in the photo FWIW, but I'd
>> >>confirm it.
>> >>
>> >>Don't buy a cheap power supply, get something decent. Ditto the RAM. I
>> buy
>> >
>> >>only Crucial RAM (www.crucial.com <http://www.crucial.com>) unless a
>> mobo manufacturer specifically
>> >
>> >>demands something else.
>> >>
>> >>AA
>> >>
>> >>
>> >>"James McCloskey" <excelsm@hotmail.com <mailto:excelsm@hotmail.com>>
>> wrote in message
>> >>news:481213dc$1@linux...
>> >>>
>> >>> Will this MOBO run Paris XP ?
>> >>>
>> >>> MSI 648F Neo MS-6585
>> >>>
>> >>> http://www.msicomputer.com/product/p_spec.asp?model=648F_Neo -L
>> >>
>> >>
>> >
>
> --
> Chris Ludwig
>
> ADK Pro Audio
> (859) 635-5762
> www.adkproaudio.com
> chrisl@adkproaudio.com
|
|
|
|
| Re: Will this MOBO run Paris XP ? [message #98328 is a reply to message #98324] |
Tue, 29 April 2008 13:57 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Crap, I recomended (a couple months ago) Norton Ghost to a friend. :-(
I use Ghost 2003
Rod
Chris Ludwig <chrisl@adkproaudio.com> wrote:
>Hi Aaron,
>The new Norton Ghost sucks balls! :)
>Acronis True Image 11 is excellent as well as Paragon drive back up.
>Paragon is probably a bit to techie for most folks though.
>
>Chris
>
>
>Aaron Allen wrote:
>> I use SP1 w/o any troubles. I didn't see anything of real value to a DAW
>> in SP2. However, my machine will not ever be an internet machine. Keep
>> it lean, clean and focused on DAW duties.
>>
>> What I meant by PCI slots is what spec...... 2.1, 2.2, 2.3?
>>
>> I would definitely dump the Kingston. Get whatever the manufacturer said
>> to get for that model. If you can't find what they spec'd anymore go to
>> www.crucial.com <http://www.crucial.com> and get what they say to get
>> < http://www.crucial.com/store/listparts.aspx?model=MS-6585%20 V5.0%20%28648F%20Neo%29>.
>
>> Get a matched pair of 512's, they're cheaper than yard dirt these days,
>> and a GB is plenty to run ParisXP. www.musicxp.net
>> <http://www.musicxp.net> will have some good optimization tips, also.
>>
>> An antec 400 is 'probably' good for 2, maybe 3 EDS cards. No more IMO,
>> of course depending on what other stuff you have on it. As you add more
>> hard drives and CD/DVD drives, be aware of power drain. FWIW, Brian T
>> didn't even had a optical CD/DVD drive in his DAW. He fed out via
>> removable FW drives. Extras create extra possible headaches. Get it
>> built as a solid system, then you can add stuff. Be methodical, move
>> slowly and you'll be a heck of a lot less likely to pull your hair out
>> chasing any ghosts.
>>
>> Now, you are going to use a separate audio drive, right? (grandfatherly
>> voice)
>> Memory writes, caching and the such make recording to the OS drive
>> generally a bad idea, no matter who's OS.
>>
>> Oh, you didn't say but if that's not an nVidia video card, I'd dump it
>> based on my past experiences. Get at minimum 64 MB vid ram per screen
>> output, more if you can. Paris loves it some nVidia/GeForce. Don't load
>> a bunch of video card/gaming crapware, keep it simple 'n' clean. Native
>> XP drivers if they exist. Try TXmicro.com or something similar for
>> surplus cards, again priced like dirt these days for AGP but soon you
>> won't be able to find those vintage parts.
>>
>> Buy Norton Ghost, or Acronis True Image. Use it. Believe me now or
>> believe me later on that.
>>
>> AA
>>
>>
>>
>> "James McCloskey" <excelsm@hotmail.com <mailto:excelsm@hotmail.com>>
>> wrote in message news:48129b64$1@linux...
>> >
>> > Thanks Aaron! This is the MOBO I'm currently running with a P4
>> 2.4GHz. It's
>> > in a Antec tower with a Antec 400 watt SmartPower power supply. There
is
>> > some issues with memory with this MOBO, so I'm running only 512 k,
I
>> think
>> > it's Kingston memory. PCI slots are standard 133.
>> >
>> > When I have time I'm going to wipe a 160 GB drive to start fresh and
>> install
>> > Paris on XP. Do you think I should go with server pack 1 or 2?
>> >
>> > "Aaron Allen" <know-spam@not_here.dude
>> <mailto:know-spam@not_here.dude>> wrote:
>> >>Looks like it should, but shut off the CPU hyperthreading in the
>> BIOS. Other
>> >
>> >>things to kill are serial/LPT ports, USB and onboard audio if you're
>> >>planning on loading the PCI slots. If you're not using networking,
kill
>> > that
>> >>also in the BIOS. These are not 'have to' things, but with 6 PCI slots
I
>> > bet
>> >>there's a lot of PCI sharing going on.... and that can mean troubles.
>> >>
>> >>That brings my next question: what PCI spec are those slots, the web
page
>> >
>> >>didn't say. They look to be keyed properly in the photo FWIW, but I'd
>> >>confirm it.
>> >>
>> >>Don't buy a cheap power supply, get something decent. Ditto the RAM.
>> I buy
>> >
>> >>only Crucial RAM (www.crucial.com <http://www.crucial.com>) unless
a
>> mobo manufacturer specifically
>> >
>> >>demands something else.
>> >>
>> >>AA
>> >>
>> >>
>> >>"James McCloskey" <excelsm@hotmail.com <mailto:excelsm@hotmail.com>>
>> wrote in message
>> >>news:481213dc$1@linux...
>> >>>
>> >>> Will this MOBO run Paris XP ?
>> >>>
>> >>> MSI 648F Neo MS-6585
>> >>>
>> >>> http://www.msicomputer.com/product/p_spec.asp?model=648F_Neo -L
>> >>
>> >>
>> >
>
>--
>Chris Ludwig
>
>ADK Pro Audio
>(859) 635-5762
>www.adkproaudio.com
>chrisl@adkproaudio.com
|
|
|
|
Goto Forum:
Current Time: Fri Dec 13 13:01:50 PST 2024
Total time taken to generate the page: 0.08181 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
