The PARIS Forums: PARIS: Main » Problem loading up 3.0

Home » The PARIS Forums » PARIS: Main » Problem loading up 3.0

Show: Today's Messages :: Polls :: Message Navigator

Problem loading up 3.0 [message #99736]

Mon, 28 July 2008 17:43

Ron Bloom
Messages: 12
Registered: July 2008

Junior Member

Hi all,

So I rushed home to do the install of 3.0. Says to blow away the old version
(that was working fine last night) before I went on with the install. So
I did that. Files seem to down load right, but right after the opening screen
says it can't find the master card and that I should check connections and
make sure they are tight. They are all tight. I can't get any further in
the install. Any thoughts.........everytime I try and make something better.............

Report message to a moderator

Re: Problem loading up 3.0 [message #99739 is a reply to message #99736]

Mon, 28 July 2008 18:11

Ron Bloom
Messages: 12
Registered: July 2008

Junior Member

Me Again,

to be more specific the error says this "Error in initializing Paris Engine.
No interface was found connected to the master card.

Before I turned it off and deleted 2.0 it was connected and ran the two eds
cards fine. It wasn't moved or anything during install....HELP

"Ron" <concerts4u@prodigy.net> wrote:
>
>Hi all,
>
>So I rushed home to do the install of 3.0. Says to blow away the old version
>(that was working fine last night) before I went on with the install. So
>I did that. Files seem to down load right, but right after the opening screen
>says it can't find the master card and that I should check connections and
>make sure they are tight. They are all tight. I can't get any further in
>the install. Any thoughts.........everytime I try and make something better.............
>
>

Report message to a moderator

Re: Problem loading up 3.0 [message #99742 is a reply to message #99739]

Mon, 28 July 2008 18:33

Ron Bloom
Messages: 12
Registered: July 2008

Junior Member

Fixed - it seems it wanted the other card to be the master now for some reason.
This NG is great. I must have been close enough to the screen to get the
wisdom of others befroe they typed. I heard loud and clear check the other
card.
thanks

"Ron" <concerts4u@prodigy.net> wrote:
>
>Me Again,
>
>to be more specific the error says this "Error in initializing Paris Engine.
>No interface was found connected to the master card.
>
>Before I turned it off and deleted 2.0 it was connected and ran the two
eds
>cards fine. It wasn't moved or anything during install....HELP
>
>"Ron" <concerts4u@prodigy.net> wrote:
>>
>>Hi all,
>>
>>So I rushed home to do the install of 3.0. Says to blow away the old version
>>(that was working fine last night) before I went on with the install. So
>>I did that. Files seem to down load right, but right after the opening
screen
>>says it can't find the master card and that I should check connections
and
>>make sure they are tight. They are all tight. I can't get any further in
>>the install. Any thoughts.........everytime I try and make something better.............
>>
>>
>

Report message to a moderator

Re: Problem loading up 3.0 [message #99743 is a reply to message #99739]

Mon, 28 July 2008 18:34

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

yup. Here's the deal. Your 'master' card changed positions, although I
thought for some reason that was a PCI bus Windows 95/98 versus ME/XP deal.
Put on ONE interface (442 or MEC) and move the plug around the EDS cards
(the SCSI one) until you get a hit. Then you've found your master card and
can add any other interfaces.

AA

"Ron" <concerts4u@prodigy.net> wrote in message news:488e6e57$1@linux...
>
> Me Again,
>
> to be more specific the error says this "Error in initializing Paris
> Engine.
> No interface was found connected to the master card.
>
> Before I turned it off and deleted 2.0 it was connected and ran the two
> eds
> cards fine. It wasn't moved or anything during install....HELP
>
> "Ron" <concerts4u@prodigy.net> wrote:
>>
>>Hi all,
>>
>>So I rushed home to do the install of 3.0. Says to blow away the old
>>version
>>(that was working fine last night) before I went on with the install. So
>>I did that. Files seem to down load right, but right after the opening
>>screen
>>says it can't find the master card and that I should check connections and
>>make sure they are tight. They are all tight. I can't get any further in
>>the install. Any thoughts.........everytime I try and make something
>>better.............
>>
>>
>

Report message to a moderator

Re: Problem loading up 3.0 [message #99754 is a reply to message #99743]

Tue, 29 July 2008 11:15

Morgan

Messages: 133
Registered: August 2005

Senior Member

Hey Ron,
Glad to hear you got it :)
Call me if you have any further issues !
Morgan

"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:488e757d@linux...
> yup. Here's the deal. Your 'master' card changed positions, although I
> thought for some reason that was a PCI bus Windows 95/98 versus ME/XP
> deal. Put on ONE interface (442 or MEC) and move the plug around the EDS
> cards (the SCSI one) until you get a hit. Then you've found your master
> card and can add any other interfaces.
>
> AA
>
> "Ron" <concerts4u@prodigy.net> wrote in message news:488e6e57$1@linux...
>>
>> Me Again,
>>
>> to be more specific the error says this "Error in initializing Paris
>> Engine.
>> No interface was found connected to the master card.
>>
>> Before I turned it off and deleted 2.0 it was connected and ran the two
>> eds
>> cards fine. It wasn't moved or anything during install....HELP
>>
>> "Ron" <concerts4u@prodigy.net> wrote:
>>>
>>>Hi all,
>>>
>>>So I rushed home to do the install of 3.0. Says to blow away the old
>>>version
>>>(that was working fine last night) before I went on with the install. So
>>>I did that. Files seem to down load right, but right after the opening
>>>screen
>>>says it can't find the master card and that I should check connections
>>>and
>>>make sure they are tight. They are all tight. I can't get any further in
>>>the install. Any thoughts.........everytime I try and make something
>>>better.............
>>>
>>>
>>
>
>

Report message to a moderator

Previous Topic:	Tubes for Atomic Reactor guitar amp
Next Topic:	ADAT Beta Testers needed

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri May 30 13:24:56 PDT 2025

Total time taken to generate the page: 0.02390 seconds