|
|
|
|
|
|
|
|
|
Re: New Paris hardware project [message #107598 is a reply to message #107597] |
Sun, 14 April 2013 02:29 |
danielcornelius
Messages: 171 Registered: May 2012
|
Senior Member |
|
|
Its really expensive !!! You can take better some RME Cards and get some Microphone Tube Amps from Universal Audio Twin Finty 4710 with 8 Channels. I use this UA Amp with Paris and RME Card to swap between 48 Khz to 192 Khz.
----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit
[Updated on: Sun, 14 April 2013 03:09] Report message to a moderator
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Re: New Paris hardware project [message #107684 is a reply to message #107683] |
Sun, 05 May 2013 22:03 |
imajon
Messages: 55 Registered: June 2009 Location: Wisconsin
|
Member |
|
|
Yes, It functions just like to separate normal Mecs. Patchbay config is the same. If in my case a four slot and a 3 slot unit, it still displays all 9 slots but since you physically can only put X number modules in that particular mec, only those that are present show up in the appropriate slot. Slots 5-9 in the four slot mec are displayed but since you can't put a card in the non existant slot, it doesn't matter. In other words... empty slots displayed is a software function. What shows up in the slot when is a combination of the hardware there and the software seeing it.
You can run one eds card with one Mec if you want, the other one will just sit there doing nothing. They are not tied together in any way except for being the same box. In my case, they share the same power supply but that only means both units will be on but still are seperate entities as far as Paris is concerned. For a multi eds card set up you still have to do all the same things as far as syncing them together.
Update
All is working fine with Mec Duet. Just did another... 4 slot X 3 slot, reducing all the mecs Ive collected over the years.
[Updated on: Sun, 26 May 2013 21:39] Report message to a moderator
|
|
|