The PARIS Forums: PARIS: Main » Trim gain control in Paris

Home » The PARIS Forums » PARIS: Main » Trim gain control in Paris

Show: Today's Messages :: Polls :: Message Navigator

Trim gain control in Paris [message #69737]

Wed, 28 June 2006 03:54

Dan B
Messages: 54
Registered: June 2005

Member

Hi,
I'm attempting to set individual channel levels to +2db on a VU meter when
the channel is solod and the fader is cranked to +10. Unfortunately the only
VU plug in I have is native and so can only work on the inserts. Which means
I can't use an EDS comp to set the gain since they're post native inserts.
And the channel fader won't have any effect either. Still, figure I could
insert a native plug to control the gain before the VU meter plug. Any idea
what plug in I could use to do this without introducing artefacts and without
introducing unnecessary load on the CPU.

I could use Waves L2, though that will have artefacts (not necessarily a
bad thing) and increase CPU load.

Thanks for any thoughts.

Dan

Report message to a moderator

Re: Trim gain control in Paris [message #69738 is a reply to message #69737]

Wed, 28 June 2006 04:00

John [1]
Messages: 2229
Registered: September 2005

Senior Member

Try a C1 with 1:1 compression

"dan b" <daniel_burneNOSPAM@yahoo.com> wrote:
>
>Hi,
>I'm attempting to set individual channel levels to +2db on a VU meter when
>the channel is solod and the fader is cranked to +10. Unfortunately the
only
>VU plug in I have is native and so can only work on the inserts. Which means
>I can't use an EDS comp to set the gain since they're post native inserts.
>And the channel fader won't have any effect either. Still, figure I could
>insert a native plug to control the gain before the VU meter plug. Any idea
>what plug in I could use to do this without introducing artefacts and without
>introducing unnecessary load on the CPU.
>
>I could use Waves L2, though that will have artefacts (not necessarily a
>bad thing) and increase CPU load.
>
>Thanks for any thoughts.
>
>Dan

Report message to a moderator

Re: Trim gain control in Paris [message #69739 is a reply to message #69737]

Wed, 28 June 2006 04:20

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Hey you could use just a free volume vst plugin.
Do a simple google search and you will get one free without any cpu resourse
drawback !
Regards,
Dimitrios
"dan b" <daniel_burneNOSPAM@yahoo.com> wrote:
>
>Hi,
>I'm attempting to set individual channel levels to +2db on a VU meter when
>the channel is solod and the fader is cranked to +10. Unfortunately the
only
>VU plug in I have is native and so can only work on the inserts. Which means
>I can't use an EDS comp to set the gain since they're post native inserts.
>And the channel fader won't have any effect either. Still, figure I could
>insert a native plug to control the gain before the VU meter plug. Any idea
>what plug in I could use to do this without introducing artefacts and without
>introducing unnecessary load on the CPU.
>
>I could use Waves L2, though that will have artefacts (not necessarily a
>bad thing) and increase CPU load.
>
>Thanks for any thoughts.
>
>Dan

Report message to a moderator

Re: Trim gain control in Paris [message #69747 is a reply to message #69737]

Wed, 28 June 2006 09:38

Rod Lincoln
Messages: 883
Registered: September 2005

Senior Member

Sounds like you've been reading "Mixing with your Mind"
The Paris vst eq has a trim and would work work well for that application
"dan b" <daniel_burneNOSPAM@yahoo.com> wrote:
>
>Hi,
>I'm attempting to set individual channel levels to +2db on a VU meter when
>the channel is solod and the fader is cranked to +10. Unfortunately the
only
>VU plug in I have is native and so can only work on the inserts. Which means
>I can't use an EDS comp to set the gain since they're post native inserts.
>And the channel fader won't have any effect either. Still, figure I could
>insert a native plug to control the gain before the VU meter plug. Any idea
>what plug in I could use to do this without introducing artefacts and without
>introducing unnecessary load on the CPU.
>
>I could use Waves L2, though that will have artefacts (not necessarily a
>bad thing) and increase CPU load.
>
>Thanks for any thoughts.
>
>Dan

Report message to a moderator

Re: Trim gain control in Paris [message #69758 is a reply to message #69747]

Wed, 28 June 2006 16:21

Dan B
Messages: 54
Registered: June 2005

Member

Hey Rod,
I have indeed! Most of Stav's advice seems to be pure gold (best money I
ever spent in the studio!), so I though I ought to give his VU mix trick
a spin too ... You had much luck with it? And how are you implementing it
through Paris? (with the VST eq and PSP meter?)

Cheers,
Dan

"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>Sounds like you've been reading "Mixing with your Mind"
>The Paris vst eq has a trim and would work work well for that application
>"dan b" <daniel_burneNOSPAM@yahoo.com> wrote:
>>
>>Hi,
>>I'm attempting to set individual channel levels to +2db on a VU meter when
>>the channel is solod and the fader is cranked to +10. Unfortunately the
>only
>>VU plug in I have is native and so can only work on the inserts. Which
means
>>I can't use an EDS comp to set the gain since they're post native inserts.
>>And the channel fader won't have any effect either. Still, figure I could
>>insert a native plug to control the gain before the VU meter plug. Any
idea
>>what plug in I could use to do this without introducing artefacts and without
>>introducing unnecessary load on the CPU.
>>
>>I could use Waves L2, though that will have artefacts (not necessarily
a
>>bad thing) and increase CPU load.
>>
>>Thanks for any thoughts.
>>
>>Dan
>

Report message to a moderator

Previous Topic:	Lots of PARIS Parts For Sale-See For Sale Section
Next Topic:	Using PARIS as a summing bus config????

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 15 00:51:04 PDT 2025

Total time taken to generate the page: 0.01971 seconds