Home » The PARIS Forums » PARIS: Main » Need a Magma ribbon cable or I'll die!!!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69340 is a reply to message #69338] |
Thu, 15 June 2006 10:52   |
![mike audet[1] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "mike audet[1] is currently offline")
mike audet[1]
Messages: 129
Registered: February 2006
|
Senior Member |
|
|
Hi DJ,
I'm glad I could help. I researched the shit out of trying to find one someone
who sold/made them, and Bob was the only guy I could find. I ended up paying
$120 for a used one because I couldn't get the specs from Magma to give to
Bob.
Would you mind posting the specs when you get the new cable back from Bob?
I'll probably order a spare from him just in case mine bites the dust.
Cheers!
Mike
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Thanks Mike,
>
>I talked to Bob and it looks like this may happen. I've got a dead Magma
>cable here and I'm going to send it to him so he ach check the pinout. It's
>likely a straight through situation. He should be able to take it from
>there.
>
>Appreciated.
>
>Deej
>
>"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote in message
>news:448ef6b5$1@linux...
>>
>> Hi DJ,
>>
>> This guy said he could build one for me, but he wasn't sure of the specs
>> and couldn't guanatee it would be right.
>>
>> bobp at sierratechnologies dot com
>>
>> Maybe if you could send him pictures of one, he could comment on it with
>> more confidence.
>>
>> He wrote, "Pricing would be $61.65 for a 1.5 foot cable and it could ship
>> in 3-4 days ARO".
>>
>> Hope this helps,
>>
>> Mike
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> >I'm looking for an external ribbon cable to an older 32bit Magma chassis.
>> >The cable is an 80 pin microcentronics (MC80) and the part name is
>CBL2PCI.
>> >It's a 3M branded connector.
>> >
>> >Calls to Magma have been about as useless as tits on a boar hog. I spent
>> the
>> >best part of yesterday trying to source one on the net with no luck.
Any
>> >suggestions as to where to find one or how to build one would be welcome.
>> >
>> >Thanks,
>> >
>> >Deej
>> >
>> >
>>
>
>
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69349 is a reply to message #69340] |
Thu, 15 June 2006 12:09 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
No way dude.........I'm going to corner the market on these, advertize them
on EBay and make a killing off all the poor schmucks like you and me who
have bad Magma cables and then I can retire. It's gonna cost you $250.00!!!
(seriously though........I'll be glad to share this ;o)
Bob said that to the best of his knowledge, the 80 pin microcentronics
cables were wired straight through. Guess we'll find out soon enough.
Thanks again for the lead on this. Hopefully it will work.
;o)
..
"mike audet" <mike@....> wrote in message news:44919e77$1@linux...
>
> Hi DJ,
>
> I'm glad I could help. I researched the shit out of trying to find one
someone
> who sold/made them, and Bob was the only guy I could find. I ended up
paying
> $120 for a used one because I couldn't get the specs from Magma to give to
> Bob.
>
> Would you mind posting the specs when you get the new cable back from Bob?
> I'll probably order a spare from him just in case mine bites the dust.
>
> Cheers!
> Mike
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >Thanks Mike,
> >
> >I talked to Bob and it looks like this may happen. I've got a dead Magma
> >cable here and I'm going to send it to him so he ach check the pinout.
It's
> >likely a straight through situation. He should be able to take it from
> >there.
> >
> >Appreciated.
> >
> >Deej
> >
> >"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote in message
> >news:448ef6b5$1@linux...
> >>
> >> Hi DJ,
> >>
> >> This guy said he could build one for me, but he wasn't sure of the
specs
> >> and couldn't guanatee it would be right.
> >>
> >> bobp at sierratechnologies dot com
> >>
> >> Maybe if you could send him pictures of one, he could comment on it
with
> >> more confidence.
> >>
> >> He wrote, "Pricing would be $61.65 for a 1.5 foot cable and it could
ship
> >> in 3-4 days ARO".
> >>
> >> Hope this helps,
> >>
> >> Mike
> >>
> >>
> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >> >I'm looking for an external ribbon cable to an older 32bit Magma
chassis.
> >> >The cable is an 80 pin microcentronics (MC80) and the part name is
> >CBL2PCI.
> >> >It's a 3M branded connector.
> >> >
> >> >Calls to Magma have been about as useless as tits on a boar hog. I
spent
> >> the
> >> >best part of yesterday trying to source one on the net with no luck.
> Any
> >> >suggestions as to where to find one or how to build one would be
welcome.
> >> >
> >> >Thanks,
> >> >
> >> >Deej
> >> >
> >> >
> >>
> >
> >
>
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69420 is a reply to message #69295] |
Sat, 17 June 2006 07:53 |
c2
Messages: 1
Registered: June 2006
|
Junior Member |
|
|
Hello
I'm in need of an 80 pin cable for my Magma box, too. Would appreciate a
contact where I could get one, too.
Thanks
Craig
On 6/13/06 10:32 AM, in article 448ef6b5$1@linux, "Mike Audet"
<mike@mikeF-SPAMaudet.com> wrote:
>
> Hi DJ,
>
> This guy said he could build one for me, but he wasn't sure of the specs
> and couldn't guanatee it would be right.
>
> bobp at sierratechnologies dot com
>
> Maybe if you could send him pictures of one, he could comment on it with
> more confidence.
>
> He wrote, "Pricing would be $61.65 for a 1.5 foot cable and it could ship
> in 3-4 days ARO".
>
> Hope this helps,
>
> Mike
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> I'm looking for an external ribbon cable to an older 32bit Magma chassis.
>> The cable is an 80 pin microcentronics (MC80) and the part name is CBL2PCI.
>> It's a 3M branded connector.
>>
>> Calls to Magma have been about as useless as tits on a boar hog. I spent
> the
>> best part of yesterday trying to source one on the net with no luck. Any
>> suggestions as to where to find one or how to build one would be welcome.
>>
>> Thanks,
>>
>> Deej
>>
>>
>
|
|
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69489 is a reply to message #69485] |
Mon, 19 June 2006 05:12 |
mike audet[1]
Messages: 129
Registered: February 2006
|
Senior Member |
|
|
Hi Migel,
I'm not sure when, but at some point, Magma switched from custom made 80
pin ribbon style cables to connect the host and system cards to a standard
68 pin scsi cable. Unortunately, people like me got "great" deals on the
older style of chassis, only to run into the severe shortage of the older
cables. Magma doesn't sell, support, or even provide specs for the older
cables anymore.
Hopefully, DJ will report success in having one custom made.
All the best,
Mike
"Miguel Vigil" <nospam@nospam.com> wrote:
> http://mobilityelectronics.com/expansion/products/pci_expans ion/7slot3233/7slot_3233_prices.html
>
>Scroll down to
>Spares and Replacements
>Product #
>
>Description Price Availability Buy
>
>CBL1HF
>
>1 meter expansion cable
>
>$99
>
>In Stock
>
>CBL1.5HF
>
>1.5 meter expansion cable
>
>$109
>
>In Stock
>
>
>
>I'm beginning to think the older models used a flat scsi iii type cable
male
>68 connectors.
>If you look at the pix for the newer 32bit model it shows a round cable.
>
>Hope this helps,
>
>El Miguel
>
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:448edbb8$1@linux...
>> I'm looking for an external ribbon cable to an older 32bit Magma chassis.
>> The cable is an 80 pin microcentronics (MC80) and the part name is
>CBL2PCI.
>> It's a 3M branded connector.
>>
>> Calls to Magma have been about as useless as tits on a boar hog. I spent
>the
>> best part of yesterday trying to source one on the net with no luck. Any
>> suggestions as to where to find one or how to build one would be welcome.
>>
>> Thanks,
>>
>> Deej
>>
>>
>
>
>
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69493 is a reply to message #69489] |
Mon, 19 June 2006 06:50 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
Hopefully.......
;o)
"Mike Audet" <mike@....> wrote in message news:44969495$1@linux...
>
> Hi Migel,
>
> I'm not sure when, but at some point, Magma switched from custom made 80
> pin ribbon style cables to connect the host and system cards to a standard
> 68 pin scsi cable. Unortunately, people like me got "great" deals on the
> older style of chassis, only to run into the severe shortage of the older
> cables. Magma doesn't sell, support, or even provide specs for the older
> cables anymore.
>
> Hopefully, DJ will report success in having one custom made.
>
> All the best,
>
> Mike
>
>
> "Miguel Vigil" <nospam@nospam.com> wrote:
>
> http://mobilityelectronics.com/expansion/products/pci_expans ion/7slot3233/7
slot_3233_prices.html
> >
> >Scroll down to
> >Spares and Replacements
> >Product #
> >
> >Description Price Availability Buy
> >
> >CBL1HF
> >
> >1 meter expansion cable
> >
> >$99
> >
> >In Stock
> >
> >CBL1.5HF
> >
> >1.5 meter expansion cable
> >
> >$109
> >
> >In Stock
> >
> >
> >
> >I'm beginning to think the older models used a flat scsi iii type cable
> male
> >68 connectors.
> >If you look at the pix for the newer 32bit model it shows a round cable.
> >
> >Hope this helps,
> >
> >El Miguel
> >
> >
> >
> >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >news:448edbb8$1@linux...
> >> I'm looking for an external ribbon cable to an older 32bit Magma
chassis.
> >> The cable is an 80 pin microcentronics (MC80) and the part name is
> >CBL2PCI.
> >> It's a 3M branded connector.
> >>
> >> Calls to Magma have been about as useless as tits on a boar hog. I
spent
> >the
> >> best part of yesterday trying to source one on the net with no luck.
Any
> >> suggestions as to where to find one or how to build one would be
welcome.
> >>
> >> Thanks,
> >>
> >> Deej
> >>
> >>
> >
> >
> >
>
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69562 is a reply to message #69489] |
Tue, 20 June 2006 18:02 |
Miguel Vigil [1]
Messages: 258
Registered: July 2005
|
Senior Member |
|
|
Rats, too bad. When I purchased a pair of older Avid Magma 7 slot;
I got heavy flat type cable but the 3M connectors count are 68.
dunno know if I'm lucky or what?
Regards,
El Miguel
"Mike Audet" <mike@....> wrote in message news:44969495$1@linux...
>
> Hi Migel,
>
> I'm not sure when, but at some point, Magma switched from custom made 80
> pin ribbon style cables to connect the host and system cards to a standard
> 68 pin scsi cable. Unortunately, people like me got "great" deals on the
> older style of chassis, only to run into the severe shortage of the older
> cables. Magma doesn't sell, support, or even provide specs for the older
> cables anymore.
>
> Hopefully, DJ will report success in having one custom made.
>
> All the best,
>
> Mike
>
>
> "Miguel Vigil" <nospam@nospam.com> wrote:
>
> http://mobilityelectronics.com/expansion/products/pci_expans ion/7slot3233/7
slot_3233_prices.html
> >
> >Scroll down to
> >Spares and Replacements
> >Product #
> >
> >Description Price Availability Buy
> >
> >CBL1HF
> >
> >1 meter expansion cable
> >
> >$99
> >
> >In Stock
> >
> >CBL1.5HF
> >
> >1.5 meter expansion cable
> >
> >$109
> >
> >In Stock
> >
> >
> >
> >I'm beginning to think the older models used a flat scsi iii type cable
> male
> >68 connectors.
> >If you look at the pix for the newer 32bit model it shows a round cable.
> >
> >Hope this helps,
> >
> >El Miguel
> >
> >
> >
> >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >news:448edbb8$1@linux...
> >> I'm looking for an external ribbon cable to an older 32bit Magma
chassis.
> >> The cable is an 80 pin microcentronics (MC80) and the part name is
> >CBL2PCI.
> >> It's a 3M branded connector.
> >>
> >> Calls to Magma have been about as useless as tits on a boar hog. I
spent
> >the
> >> best part of yesterday trying to source one on the net with no luck.
Any
> >> suggestions as to where to find one or how to build one would be
welcome.
> >>
> >> Thanks,
> >>
> >> Deej
> >>
> >>
> >
> >
> >
>
|
|
|
|
| Re: Need a Magma ribbon cable or I'll die!!! [message #69574 is a reply to message #69562] |
Wed, 21 June 2006 05:52 |
Mike Audet
Messages: 294
Registered: December 2008
|
Senior Member |
|
|
I'd count the pins again. It sounds like you've got the 80 pin cables. But,
I'm no expert.
Let's hope, for your sake, that they are 68 pins. Much easier to replace
the cables that way.
All the best,
Mike
"Miguel Vigil" <nospam@nospam.com> wrote:
>Rats, too bad. When I purchased a pair of older Avid Magma 7 slot;
>I got heavy flat type cable but the 3M connectors count are 68.
>
>dunno know if I'm lucky or what?
>
>Regards,
>
>El Miguel
>
>
>
>
>"Mike Audet" <mike@....> wrote in message news:44969495$1@linux...
>>
>> Hi Migel,
>>
>> I'm not sure when, but at some point, Magma switched from custom made
80
>> pin ribbon style cables to connect the host and system cards to a standard
>> 68 pin scsi cable. Unortunately, people like me got "great" deals on
the
>> older style of chassis, only to run into the severe shortage of the older
>> cables. Magma doesn't sell, support, or even provide specs for the older
>> cables anymore.
>>
>> Hopefully, DJ will report success in having one custom made.
>>
>> All the best,
>>
>> Mike
>>
>>
>> "Miguel Vigil" <nospam@nospam.com> wrote:
>>
>> http://mobilityelectronics.com/expansion/products/pci_expans ion/7slot3233/7
>slot_3233_prices.html
>> >
>> >Scroll down to
>> >Spares and Replacements
>> >Product #
>> >
>> >Description Price Availability Buy
>> >
>> >CBL1HF
>> >
>> >1 meter expansion cable
>> >
>> >$99
>> >
>> >In Stock
>> >
>> >CBL1.5HF
>> >
>> >1.5 meter expansion cable
>> >
>> >$109
>> >
>> >In Stock
>> >
>> >
>> >
>> >I'm beginning to think the older models used a flat scsi iii type cable
>> male
>> >68 connectors.
>> >If you look at the pix for the newer 32bit model it shows a round cable.
>> >
>> >Hope this helps,
>> >
>> >El Miguel
>> >
>> >
>> >
>> >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> >news:448edbb8$1@linux...
>> >> I'm looking for an external ribbon cable to an older 32bit Magma
>chassis.
>> >> The cable is an 80 pin microcentronics (MC80) and the part name is
>> >CBL2PCI.
>> >> It's a 3M branded connector.
>> >>
>> >> Calls to Magma have been about as useless as tits on a boar hog. I
>spent
>> >the
>> >> best part of yesterday trying to source one on the net with no luck.
>Any
>> >> suggestions as to where to find one or how to build one would be
>welcome.
>> >>
>> >> Thanks,
>> >>
>> >> Deej
>> >>
>> >>
>> >
>> >
>> >
>>
>
>
|
|
|
|
Goto Forum:
Current Time: Wed Nov 27 08:19:32 PST 2024
Total time taken to generate the page: 0.02628 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
