Home » The PARIS Forums » PARIS: Main » OK...new computer.....here's the plan...and a question
| OK...new computer.....here's the plan...and a question [message #60922] |
Sun, 04 December 2005 10:46  |
![Deej [1] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "Deej [1] is currently offline")
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
will be more than
> enough for her current needs with Photoshop, Illustrator, Pagemaker, etc.
>
> Since I keep my computers set up on open SenFu test benches in a machine
> room, what I'm going to do is buy a good, quiet case, PSU, video card, audio
> card, CD/DVD player/burner, floppy and a big storage drive for her, install
> the current system drive, mobo and aforementioned componentry into that,
> reformat the drive, reload Win XP (so that she's not running the *tweaked to
> hell* system I'm running now) and buy her the Adobe software that she needs
> to be productive.
>
> Next, I'm going to build another native system. I'm going to need a mobo,
> RAM and a dual core AMD CPU. I'll be interfacing my audio hardware/UAD-1
> cards using a Magma 13 slot chassis so I'm not really concerned about the
> number of PCI slots. One thing I do want to be able to do is to use my two
> existing Matrox G450's (AGP and PCI) Due to this, I am leaning toward trying
> the ASUS A8V-Deluxe mobo just because I'm familiar with the quirks of ASUS,
> I know that one of the PCI slots will be hardwired to the AGP and I know
> that since the Matrox cards share the same driver, this *should* work nicely
> with the host card of the Magma using az PCI slot that (hopefully) isn't
> sharing an IRQ with any other device, or at least benignly with something
> friendly. I'm also going to be going with at least 2 gig of DDR in this
> machine.....maybe more. Guess I'll check ASUS' site to see what's
> recommended.
>
> Lastly is the CPU. I want to be able to operate this machine as much as
> possible at low latencies with VSTi's. I've been eyeing the dual core 3800
> CPU's because they are the least expensive right now, but skimping will
> defeat the whole purpose of this upgrade.
>
> Is anyone using an AMD dual core CPU system right now? If so, I'd be mighty
> interested to hear your experiences before I once again descend into
> computer building hell.
>
> Thanks,
>
> Deej
>
>
>That's good news Dave. After checking out the mobo manual, it looks like PCI
#4 isn't shared. I'm also thinking of going with a Matrox P750 since I'm
just using 3 x mon
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60924 is a reply to message #60922] |
Sun, 04 December 2005 12:03  |
steve the artguy
Messages: 308
Registered: June 2005
|
Senior Member |
|
|
egg has very good deals on the components right now. I can get an A8V
deluxe with 2G of Corsair RAM and an AMD 64 4400 x 2 for around $800.00.
That oughta get me what I need here and then some.
Thanks,
Deej
"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
news:43934838@linux...
> Hi DJ,
>
> The machine I just built for Nuendo is an A8V Deluxe with an
> Athlon 64 X2 4800 and 2 gigs of Kingston RAM. I'm liking it
> so far, but I haven't taxed it yet, so I'm not sure where
> the break point is. I did a simple test recording 24 tracks
> at 44.1/24, played those back and recorded 24 more, played
> all that back and punched in and out repeatedly on the last
> 24. The CPU indicator in Nuendo didn't get past ONE light.
> Then I added a bunch of native and UA plus to the tracks
> (at least 30 plugs, most of them different). I played back
> the 48 tracks and punched in and out of 24 tracks with the
> plugs running. The CPU indicator never got past 4 bars.
> Oh, and I'm only running XP home (not 64), and standard IDE
> drives! :-)
>
> David.
>
> DJ wrote:
> > Wife definitely want
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60926 is a reply to message #60922] |
Sun, 04 December 2005 11:45 |
audioguy_editout_
Messages: 249
Registered: December 2005
|
Senior Member |
|
|
old on Macs in the 80s when the Atari
offered better MIDI features at a lower price and the Amiga offered a
more exciting computing vision, although the Mac of that time still had
some advantages in available software.
Fast forward to the 90s. OS7-8-9 were careening off the tracks - stuck
in decisions and mistakes of the 80's. No preemptive multitasking, no
clean protected memory design, band-aid on top of band-aid to wire
around obsolete legacy code. And after years of unsuccessfully
attempting to rewrite their way out of the bag, scrapping the whole mess
and starting over with OSX was the salvation of the company.
You could argue that the GUI and some operating specs should have
changed less. I would agree in some ways and disagree in others. For
example, requiring a ".xxx" extention in the name for file
identification was a step backwards. But for the most part the changes
were for the better. For example, core audio is great.
The transition wasn't cheap. But it did capitalize on the experience of
NeXT and the engineering talent they acquired with the buyout.
Reportedly it was either that or buy BeOS, the other major option on the
table. Both were good choices with advantages and disadvantages.
At this point the dual G5 boxes out now have plenty of muscle and
available software for audio production, with the ability to do amazing
amounts of real time tracks, virtual instruments and effects.
Speaking of desktop hardware speed, at times Motorola has been faster,
at times, Intel, at times AMD and at times IBM. Motorola's
slower-than-expected rollout of improved G4 chips and then IBM's
slower-than-expected rollout of G5 upgrades the last few years have put
Apple trailing more often than not on the muscle car front, but to say
"extremely slow" is innaccurate. At the moment, the quad G5 has a pretty
good claim for leader of the desktop pack and the duals are no slouches.
Offering Intel chips will put OSX head to head with MSWindows and it
will be interesting to see that comparison.
Price wise, Apple has been a bit more expensive, about the same or a bit
less than comparable offerings from similar turnkey computer companies
depending on the product range or how you compare. The downward trend on
prices overall has not exempted Apple, Mac prices have come down over
the last few years (despite their unfortunate decision to pull the plug
on Mac clone manufacturers).
For those who want to build their own boxes, especially in
configurations Apple has not offered, that can be a money saving option.
I say "can be" and not "will be" money saving because some box builders
I know end up turning over their hardware fairly often. And their old
hardware typically holds a lower resale value than Apple hardware. So
whether building your own boxes is cheaper in the long run is not always
a sure thing.
Factor in the time spend researching, building, testing, replacing
components, fussing with drivers, customizing your MSWindows setup.
Then, depending on what your time is worth, the comparison may come out
differently. But there's no denying that building your own box may give
you a closer approximation of what you want, assuming Apple doesn't
already offer what you want and assu
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60927 is a reply to message #60926] |
Sun, 04 December 2005 11:54 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
ming you don't want OSX and you
really like MSWindows, BSD or Linux.
Speaking of BSD and Linux, if up front cost is the measure, by far the
cheapest-upfront-cost way to go is to build your own box and run an open
source OS and software. For example: ubuntulinux.org/download/ The back
end costs are similar for any box building adventure, time spent getting
it all to work and getting software happening.
Cheers,
-Jamie
http://www.JamieKrutz.com
Mike Audet wrote:
> I agree completely. OSX was a big left turn, too. That spinning pizza is
> just completely unacceptable. They crash if they don't have enough ram.
> They're extremely slow compared to a PC (which will change when they use
> PC chips). And, they are very expensive for what the hardware and software
> are really worth.
>
> They had a really nice, simple, clean OS with OS8-9. They saved a lot of
> money not having to develop an OS from the ground up by going with UNIX,
> but they lost most of what made Apple wonderful and unique, too.
>
> Just my 2 cents. :)
>
> Mike
>I have the HDSP9652 and two UAD1 cards in there... seems
happy... I had considered picking up the 750, but we are
going to stay with two monitors for now. Using a GeForce
FX5200 card at the moment (I think), and it seems happy as well.
David.
DJ wrote:
> That's good news Dave. After checking out the mobo manual, it looks like PCI
> #4 isn't shared. I'm also thinking of going with a Matrox P750 since I'm
> just using 3 x monitors on my native system. I can use the G450 AGP on my
> wife's computer.
>
> Newegg has very good deals on the components right now. I can get an A8V
> deluxe with 2G of Corsair RAM and an AMD 64 4400 x 2 for around $800.00.
>
> That oughta get me what I need here and then some.
>
> Thanks,
>
> Deej
> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
> news:43934838@linux...
>
>>Hi DJ,
>>Deej,
I'm using the ASUS A8V-Deluxe with a 7 % overclocked dual core 3800 CPU(49
degrees Celsius), but not for Paris use. I'm using ATI 3700 graphiccard with
it and E-MU 1820M audiosystem. No problems at all with the little use I have
had with audio works on it.
For the Paris system, I'm now using an Epox 9NDA3+ motherboard with a 3200+
processor. It couldn't use my Matrox G550 card with it, so I buyed a G-Force
FX5200 card, to be sure it would work with the nForce3 Ultra chipset on the
motherboard. I'm using an Artic-Cooling Freezer 64 Pro on the processor and
a North-Q 400w power supply with a 140 mm super silent fan. I must say I
was asstonished when I saw the temperature was stable at about 42 degrees
Celsius on both processor and motherboard when driving the system hard.
Between the two Paris card it showes about 10-12 degrees higher, so the new
system is about 10-15 degrees cooler than my old Asus A/V600-X board with a
3000+ processor. On the old system I had for the most problems wit Paris and
WinXP, but on the new system, I havn't had any problems at all on both WinME
or WinXP after using it a couple of weeks. So I'm crossing my fingers that
WinXP now will work as WinME allways have done for me. So, it seems to be a
wonderful system if you're not using Matrox graphic cards with it, so Doug,
here you're out.
I have tested both boards with recoding videoes with Nero 7 and the dual
core system was unbelievable more speedy.
Erling
> Next, I'm going to build another native system. I'm going to need a mobo,
> RAM and a dual core AMD CPU. I'll be interfacing my audio hardware/UAD-1
> cards using a Magma 13 slot chassis so I'm not really concerned about the
> number of PCI slots. One thing I do want to be able to do is to use my two
> existing Matrox G450's (AGP and PCI) Due to this, I am leaning toward
> trying
> the ASUS A8V-Deluxe mobo just because I'm familiar with the quirks of
> ASUS,
> I know that one of the PCI slots will be hardwired to the AGP and I know
> that since the Matrox cards
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60928 is a reply to message #60924] |
Sun, 04 December 2005 11:54 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
share the same driver, this *should* work
> nicely
> with the host card of the Magma using az PCI slot that (hopefully) isn't
> sharing an IRQ with any other device, or at least benignly with something
> friendly. I'm also going to be going with at least 2 gig of DDR in this
> machine.....maybe more. Guess I'll check ASUS' site to see what's
> recommended.
>
> Lastly is the CPU. I want to be able to operate this machine as much as
> possible at low latencies with VSTi's. I've been eyeing the dual core 3800
> CPU's because they are the least expensive right now, but skimping will
> defeat the whole purpose of this upgrade.
>
> Is anyone using an AMD dual core CPU system right now? If so, I'd be
> mighty
> interested to hear your experiences before I once again descend into
> computer building hell.
>
> Thanks,
>
> Deej
>
>
>Thanks Erling. Is this using the AMI Bios? Please say no. I hate the AMI
bios. I gotta have the Award Bios or I will die.
;o(
"erlilo" <erlilo@online.no> wrote in message news:439354d1@linux...
>
> Deej,
>
> I'm using the ASUS A8V-Deluxe with a 7 % overclocked dual core 3800 CPU(49
> degrees Celsius), but not for Paris use. I'm using ATI 3700 graphiccard
with
> it and E-MU 1820M audiosystem. No problems at all with the little use I
have
> had with audio works on it.
>
> For the Paris system, I'm now using an Epox 9NDA3+ motherboard with a
3200+
> processor. It couldn't use my Matrox G550 card with it, so I buyed a
G-Force
> FX5200 card, to be sure it would work with the nForce
|
|
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60931 is a reply to message #60922] |
Sun, 04 December 2005 12:39 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
Be well!
Mike
Jamie K <Meta@Dimensional.com> wrote:
>
>For everyone that doesn't want a Mac, it's great that you don't have to
>have one. I wasn't completely sold on Macs in the 80s when the Atari
>offered better MIDI features at a lower price and the Amiga offered a
>more exciting computing vision, although the Mac of that time still had
>some advantages in available software.
>
>Fast forward to the 90s. OS7-8-9 were careening off the tracks - stuck
>in decisions and mistakes of the 80's. No preemptive multitasking, no
>clean protected memory design, band-aid on top of band-aid to wire
>around obsolete legacy code. And after years of unsuccessfully
>attempting to rewrite their way out of the bag, scrapping the whole mess
>and starting over with OSX was the salvation of the company.
>
>You could argue that the GUI and some operating specs should have
>changed less. I would agree in some ways and disagree in others. For
>example, requiring a ".xxx" extention in the name for file
>identification was a step backwards. But for the most part the changes
>were for the better. For example, core audio is great.
>
>The transition wasn't cheap. But it did capitalize on the experience of
>NeXT and the engineering talent they acquired with the buyout.
>Reportedly it was either that or buy BeOS, the other major option on the
>table. Both were good choices with advantages and disadvantages.
>
>At this point the dual G5 boxes out now have plenty of muscle and
>available software for audio production, with the ability to do amazing
>amounts of real time tracks, virtual instruments and effects.
>
>Speaking of desktop hardware speed, at times Motorola has been faster,
>at times, Intel, at times AMD and at times IBM. Motorola's
>slower-than-expected rollout of improved G4 chips and then IBM's
>slower-than-expected rollout of G5 upgrades the last few years have put
>Apple trailing more often than not on the muscle car front, but to say
>"extremely slow" is innaccurate. At the moment, the quad G5 has a pretty
>good claim for leader of the desktop pack and the duals are no slouches.
>
>Offering Intel chips will put OSX head to head with MSWindows and it
>will be interesting to see that comparison.
>
>Price wise, Apple has been a bit more expensive, about the same or a bit
>less than comparable offerings from similar turnkey computer companies
>depending on the product range or how you compare. The downward trend on
>prices overall has not exempted Apple, Mac prices have come down over
>the last few years (despite their unfortunate decision to pull the plug
>on Mac clone manufacturers).
>
>For those who want to build their own boxes, especially in
>
|
|
|
|
| ASUS A8V Deluxe.....AMI bios [message #60932 is a reply to message #60931] |
Sun, 04 December 2005 12:49 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
;configurations Apple has not offered, that can be a money saving option.
>I say "can be" and not "will be" money saving because some box builders
>I know end up turning over their hardware fairly often. And their old
>hardware typically holds a lower resale value than Apple hardware. So
>whether building your own boxes is cheaper in the long run is not always
>a sure thing.
>
>Factor in the time spend researching, building, testing, replacing
>components, fussing with drivers, customizing your MSWindows setup.
>Then, depending on what your time is worth, the comparison may come out
>differently. But there's no denying that building your own box may give
>you a closer approximation of what you want, assuming Apple doesn't
>already offer what you want and assuming you don't want OSX and you
>really like MSWindows, BSD or Linux.
>
>Speaking of BSD and Linux, if up front cost is the measure, by far the
>cheapest-upfront-cost way to go is to build your own box and run an open
>source OS and software. For example: ubuntulinux.org/download/ The back
>end costs are similar for any box building adventure, time spent getting
>it all to work and getting software happening.
>
>Cheers,
> -Jamie
> http://www.JamieKrutz.com
>
>
>Mike Audet wrote:
>> I agree completely. OSX was a big left turn, too. That spinning pizza
is
>> just completely unacceptable. They crash if they don't have enough ram.
>> They're extremely slow compared to a PC (which will change when they use
>> PC chips). And, they are very expensive for what the hardware and software
>> are really worth.
>>
>> They had a really nice, simple, clean OS with OS8-9. They saved a lot
of
>> money not having to develop an OS from the ground up by going with UNIX,
>> but they lost most of what made Apple wonderful and unique, too.
>>
>> Just my 2 cents. :)
>>
>> Mike
>>Hi Mike,
No offense taken at all. I didn't mean to say OS 7-8-9 was useless,
either, just that I was never impressed with it on a technical basis,
whereas OSX does impress me. Glad you got good use out of OS9 despite my
naysaying. :^)
OSX is not just "old UNIX" - it's been developed for media production
and offers significant advantages. Before you dismiss Core Audio, or for
that matter the other core media elements, you might want to look into
what's there. It took a lot of work for Apple to get to this point. And
Apple is way ahead of the game on this.
Most of my software that needs it does advantage of dual processors and
would take advantage of quad processors. It's actually not "just
marketing." It's faster DVD encoding, more audio plugins (like I need
any more than my dual 2.5GHZ can do already), faster animation
rendering, etc. etc.
BTW, when OSX goes Intel it will be able to take good advantage of the
next round of Intel duallies.
Anyway, enjoy what you have. What matters in the end is the music we make.
Cheers,
-Jamie
http://www.JamieKrutz.com
Mike Audet wrote:
> Hi Jamie,
>
> I appologize if I offended you. I certainly didn't mean to. I used to love
> the mac back in th day, and despite the layers of bandaids below the surface,
> the elegance of having extentions, control pannels, and preference files
> made for a beautiful system.
>
> No, it did
|
|
|
|
| Re: ASUS A8V Deluxe.....AMI bios [message #60948 is a reply to message #60932] |
Mon, 05 December 2005 01:12 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
ed to get this error. =
I have
a gig of memory and a fast processor as well. I am using XP pro =
with SP1
though.
Thanks,
E
"Cujo" <chris@nospamapplemanstudio.com> wrote in message
news:4392898b$1@linux...
>
>
> Hey E,
> THis is one of my fave's cause I can actually help.
> If you see this error, stop what you are doing, do not respond to =
the
error
> message on the screen, get to the project window and save the =
project
under
> a new name (songV2 or something) and the let paris crach, your =
project
will
> be A OK when you get paris back up!
>
>
> "Edna" <edna@texomaonline.com> wrote:
> >Has anyone been able to interpret just what this message means? =
And
> >basically what causes it? I only had 8 tracks recorded and was =
working
> on
> >aux effects on the piano track which I had copied, delaying the =
copy,
> >shifting the pitch, and then panning them L and R. After =
working most
> of
> >the day on the project, this error appeared but I wasnt able to =
save the
> >project and since I hadn't remembered to save the project earlier =
I lost
> it
> >all. Think I will call it a day! :-(
> >
> >
------=_NextPart_000_001F_01C5F972.D7DC1580
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Thanks. Yes I have a P4, but have =
HT=20
off. The error message does have "cache: 460. . . " in =
it.(?)</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
<A href=3D"news:4393cad7@linux">news:4393cad7@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Edna,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>By chance are you using a P4 =
chip? If so=20
make sure</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Hyperthreading is turned off in your =
BIOS. =20
That can really </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ruin a nice </FONT><FONT face=3DArial =
size=3D2>day in=20
Paris.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Edna" <<A=20
href=3D"mailto:edna@texomaonline.com">edna@texomaonline.com</A>> =
wrote in=20
message <A =
href=3D"news:4392fb60@linux">news:4392fb60@linux</A>...</DIV>Hi=20
Cujo,<BR>Unfortunately, I was not able to save it. Paris would =
not let=20
me do<BR>anything at all until I responded to t
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60955 is a reply to message #60931] |
Mon, 05 December 2005 07:36 |
Rohde Wakefield
Messages: 11
Registered: December 2005
|
Junior Member |
|
|
ood luck.... ~ Ed
"Edna" <edna@texomaonline.com> wrote:
>Thanks, I will. Well, all was not lost as I had thought. I started a new
>project using the same name and my recorded tracks appeared, only the
>project was lost. 8:)
>
>"John" <no@no.com> wrote in message news:43933964@linux...
>> Get Analogx Autosave for Paris.
>>
>> Edna wrote:
>> > Thanks for the tip, hadn't thought of ctrl-s. Yes, I know I need to
do
>> > regular saves and usually do, but got so involved in the excitement
of
>the
>> > project I just forgot. I have to admit, though, I really love Paris!
>> > E
>> >
>> > "Kim W." <no@way.com> wrote in message news:4392fecc$1@linux...
>> >
>> >>Too late now, but I have found that sometimes I have more luck just
>> >
>> > hitting
>> >
>> >>ctrl-s, without even touching the project window.
>> >>When you see that HD LED blink, you know you'll be good to go
>> >>the next boot-up. I Always do an incremental save every 15 minutes
>> >>or so. Just add a number after the project name when you do a
>> >>"save as". This gives you the benefit of reviewing your progress,
>> >>and doing reality checks after many hours at mixing.
>> >>
>> >>Kim
>> >>
>> >>"Edna" <edna@texomaonline.com> wrote:
>> >>
>> >>>Hi Cujo,
>> >>>Unfortunately, I was not able to save it. Paris would not let me do
>> >>>anything at all until I responded to the error window and then it was
>all
>> >>>gone! I tried to pull up the project window or do anything but it
was
>a
>> >>>hard freeze.
>> >>>Since I only had a single submix going and was only using a couple
>> >
>> > effects
>> >
>> >>>in the aux module on one channel, I was surprised to get this error.
I
>> >>
>> >>have
>> >>
>> >>>a gig of memory and a fast processor as well. I am using XP pro with
>SP1
>> >>>though.
>> >>>Thanks,
>> >>>E
>> >>>
>> >>>"Cujo" <chris@nospamapplemanstudio.com> wrote in message
>> >>>news:4392898b$1@linux...
>> >>>
>> >>>>
>> >>>>Hey E,
>> >>>>THis is one of my fave's cause I can actually help.
>> >>>>If you see this error, stop what you are doing, do not respond to
the
>> >>>
>> >>>error
>> >>>
>> >>>>message on the screen, get to the project window and save the project
>> >>>
>> >>>under
>> >>>
>> >>>>a new name (songV2 or something) and the let paris crach, your project
>> >>>
>> >>>will
>> >&
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #60956 is a reply to message #60955] |
Mon, 05 December 2005 08:02 |
erlilo
Messages: 405
Registered: June 2005
|
Senior Member |
|
|
gt;>
>> >>>>be A OK when you get paris back up!
>> >>>>
>> >>>>
>> >>>>"Edna" <edna@texomaonline.com> wrote:
>> >>>>
>> >>>>>Has anyone been able to interpret just what this message means?
And
>> >>>>>basically what causes it? I only had 8 tracks recorded and was
>> >
>> > working
>> >
>> >>>>on
>> >>>>
>> >>>>>aux effects on the piano track which I had copied, delaying the
>copy,
>> >>>>>shifting the pitch, and then panning them L and R. After working
>> >
>> > most
>> >
>> >>>>of
>> >>>>
>> >>>>>the day on the project, this error appeared but I wasnt able to save
>> >>
>> >>the
>> >>
>> >>>>>project and since I hadn't remembered to save the project earlier
I
>> >
>> > lost
>> >
>> >>>>it
>> >>>>
>> >>>>>all. Think I will call it a day! :-(
>> >>>>>
>> >>>>>
>> >>>
>> >>>
>> >
>> >
>
>This is a multi-part message in MIME format.
------=_NextPart_000_011E_01C5F992.8A34BA60
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Edna,
I really don't have any better answer for you. Control S is your friend =
though.
Maybe you found another Paris bug? Like grabbing too many tracks in the =
editor and changing their lengths together? That one gets me once in a =
while.
Lesson is Control S, Cut all tracks needing editing to the exact same =
length,
Control S, then do the edit, then control S.
I wish I could be of more help. Maybe you do have an issue with Paris =
and your computer.
My assertion failures usually have something related to .dll in their =
title.
Tom
"Edna" <edna@texomaonline.com> wrote in message news:43944a50@linux...
Thanks. Yes I have a P4, but have HT off. The error message does =
have "cache: 460. . . " in it.(?)
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4393cad7@linux...
Edna,
By chance are you using a P4 chip? If so make sure
Hyperthreading is turned off in your BIOS. That can really=20
ruin a nice day in Paris.
Tom
"Edna" <edna@texomaonline.com> wrote in message =
news:4392fb60@linux...
Hi Cujo,
Unfortunately, I was not able to save it. Paris would not let me =
do
anything at all until I responded to the error window and then it =
was all
gone! I tried to pull up the project window or do anything but it =
was a
hard freeze.
Since I only had a single submix going and was only using a couple =
effects
in the aux module on one channel, I was surprised to get this =
error. I have
a gig of memory and a fast processor as well. I am using XP pro =
with SP1
though.
Thanks,
E
"Cujo" <chris@nospamapplemanstudio.com> wrote in message
news:4392898b$1@linux...
>
>
> Hey E,
> THis is one of my fave's cause I can actually help.
> If you see this error, stop what you are doing, do not respond =
to the
error
> message on the screen, get to the project window and save the =
project
under
> a new name (songV2 or something) and the let paris crach, your =
project
will
> be A OK when you get paris back up!
>
>
> "Edna" <edna@te
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #61001 is a reply to message #60998] |
Tue, 06 December 2005 10:14 |
Jamie K
Messages: 1115
Registered: July 2006
|
Senior Member |
|
|
k.
Certainly worth a look.
Also, you might want to check out the Cakewalk forums/news. They're leading
the charge on 64 bit Windows audio computing.
TCB
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Wife definitely wants to abandon Mac and switch to Windows. I may fix it
up,
>hang an MBox or an 001 off of it and advertize that I have Pro Tools here
>;o}
>
>My current native audio system is running an AMD XP3000 CPU on a 333MHZ
>system bus with 2 x gigs of RAM. Considering the fact that it will be at
>least twice (if not more) s fast as her G4 466 Mac, this will be more than
>enough for her current needs with Photoshop, Illustrator, Pagemaker, etc.
>
>Since I keep my computers set up on open SenFu test benches in a machine
>room, what I'm going to do is buy a good, quiet case, PSU, video card, audio
>card, CD/DVD player/burner, floppy and a big storage drive for her, install
>the current system drive, mobo and aforementioned componentry into that,
>reformat the drive, reload Win XP (so that she's not running the *tweaked
to
>hell* system I'm running now) and buy her the Adobe software that she needs
>to be productive.
>
>Next, I'm going to build another native system. I'm going to need a mobo,
>RAM and a dual core AMD CPU. I'll be interfacing my audio hardware/UAD-1
>cards using a Magma 13 slot chassis so I'm not really concerned about the
>number of PCI slots. One thing I do want to be able to do is to use my two
>existing Matrox G450's (AGP and PCI) Due to this, I am leaning toward trying
>the ASUS A8V-Deluxe mobo just because I'm familiar with the quirks of ASUS,
>I know that one of the PCI slots will be hardwired to the AGP and I know
>that since the Matrox cards share the same driver, this *should* work nicely
>with the
|
|
|
|
|
|
|
|
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #61051 is a reply to message #61014] |
Tue, 06 December 2005 23:31 |
Jamie K
Messages: 1115
Registered: July 2006
|
Senior Member |
|
|
to do our summing. More
parts don't necessarily make a better product. There are some passive designs
out there for free, some good, some bad. Justin being a cool guy has even
given advice to folks building their own. Fred Forsell also has some designs
posted on his website. It might be a good place to start, but there are
a couple of known issues with his designs.
http://www.forsselltech.com/summing_buss_schematics.htm
I guess what I am ultimately saying is that I would think very carefully
before plopping down $2-3K for a summing box. If I weren't willing or able
to do the research and build my own, I'd buy a Roll mixer. Just my $0.02.
-Chris
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>FWIW the D2B came up sounding pretty average on the DAW Summing test. Of
>course this is only one test under one set of conditions. I for one put
it
>down near the bottom of my favourite mixes. Of course much depends on which
>D/A's were used, and which A/D's were used in converting back, and how they
>were clocked (was the A/D picking up the sound at a moment "between" samples,
>or on a sample?).
>
>I'm interested to hear that your colleague is raving about them though.
I'd
>be sure to listen myself though before diving in, and do a blind A/B if
possible.
>The mix I heard lacked clarity through most of the range, seeming especially
>unresponsive in both top and bottom end... if I remember correctly. I
know
>it was on my least favourites in blind testing, and I was honestly expecting
>it to come out well above a standard Protools system.
>
>Cheers,
>Kim.
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>One of my colleagues here who has a fairly hefty PTHD system just send
me
>an
>>e-mail with some pretty positive raving about how the D2B opens up the
>>soundstage. We will be *doing lunch*later this week and I'll be gioving
>this
>>a listen.
>>
>>I've been wondering if this D2B might be the magic bullet for putting a
>>native system on the same sonic footing as Paris. I may have just picked
>up
>>a pretty big client with ongoing work involving composing original music
>for
>>video. This clients sells *lots* of videos so it's got the makings of being
>>one of those situations that I've been hoping for with steady work. I just
>>got the call about this last night. I'm glad I haven't yet ordered the
parts
>>for the new computer. I may be needing to upgrade to Nuendo and to build
>>something with a bit more horsepower if this becomes a reality.
>>
>>
>>
>Was just about ready to buy me an RME card for my Cubase box (running VSTi's)
to slave to Paris via adat sync, and I thought I'd
try my Dakota with the latest incarnation of Cubase SX before kissing the
Dak a final goodbye, and, well... IT SYNC'D.
Time and time again, all day. Most solid sync yet.
Boy, what a christmas present!!
Is it a dream?, or will I wake up next to that soak of a drummer again??Trust me, I know what SMP means. Read what I said, it's in no way incompatible
with what these (marketing boilerplate) articles say.
TCB
"A Mac User 2" <no@nottoday.com> wrote:
>
>Phil Schiller explains in an interview in 2001, near the end of the article.
>
>http://news.com.com/2100-1040-254554.html
>
>Mac OSX uses symmetric multiprocessing. Here is information from 2002.
>Look for the line that says, "Mac OS X features symmetric multiprocessing,
>enabling the operating system itself, as well as applications, to take full
>advantage of dual processors for dramatic performance gains."
>
>http://www.apple.com/pr/library/2002/jan/28pmg4.html
>
>
>Here's an article all the way back in 2000 talking about symmetric multiprocessing
>on a Mac.
>
>http://www.macobserver.com/editorial/2000/08/02.1.shtml
>
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #61122 is a reply to message #60926] |
Thu, 08 December 2005 13:09 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
low latencies with VSTi's. I've been eyeing the dual core
>
> 3800
>
>>>CPU's because they are the least expensive right now, but skimping will
>>>defeat the whole purpose of this upgrade.
>>>
>>>Is anyone using an AMD dual core CPU system right now? If so, I'd be
>
> mighty
>
>>>interested to hear your experiences before I once again descend into
>>>computer building hell.
>>>
>>>Thanks,
>>>
>>>Deej
>>>
>>>
>>>
>
>
>Dear DJ,
Why not try using CreamwarePUlsar card which has "no latency" like Paris
using its midi drivers with cubase ?
Also you can use their own samplers (Pulsar's) which load any AKAI sample
library Piano.
I am using it that way myself.
Its a complete hardware system...
Regards,
Dimitrios
Dimitrios
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Hey Dave............I just ordered an A8V-Deluxe, 2G Corsair XMS unbuffered
>and AMD 64 x 2 4200. After checking the UAD-1 forum and RME recommended
>info, this looked like the most compatible/stable mobo if using AMD CPU's.
>
>Hopefully I'll be able to track at 1.5 ms latency using VSTi's with my
>MAudiio Prostation 88 keyboard. I've been having to track keyboards using
my
>Ensoniq MR Rack to record midi and then add the VSTi later. This has created
>some problems with primadonna keyboard players who get all wierd if they
>can't use Bosendorfer samples, etc. while tracking. what's with the
>musicians anyway ;o)?
>
>I'm going to run it off the existing IDE drives initially, but I'll likely
>get myself a couple or Raptors eventually.
>
>Here goes.....AMI bios and all.
>
>Deej
>
>
>
>"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
>news:43934838@linux...
>> Hi DJ,
>>
>> The machine I just built for Nuendo is an A8V Deluxe with an
>> Athlon 64 X2 4800 and 2 gigs of Kingston RAM. I'm liking it
>> so far, but I haven't taxed it yet, so I'm not sure where
>> the break point is. I did a simple test recording 24 tracks
>> at 44.1/24, played those back and recorded 24 more, played
>> all that back and punched in and out repeatedly on the last
>> 24. The CPU indicator in Nuendo didn't get past ONE light.
>> Then I added a bunch of native and UA plus to the tracks
>> (at least 30 plugs, most of them different). I played back
>> the 48 tracks and punched in and out of 24 tracks with the
>> plugs running. The CPU indicator never got past 4 bars.
>> Oh, and I'm only running XP home (not 64), and standard IDE
>> drives! :-)
>>
>> David.
>>
>> DJ wrote:
>> > Wife definitely wants to abandon Mac and switch to Windows. I may fix
it
>up,
>> > hang an MBox or an 001 off of it and advertize that I have Pro Tools
>here
>> > ;o}
>> >
>> > My current native audio system is running an AMD XP3000 CPU on a 333MHZ
>> > system bus with 2 x gigs of RAM. Considering the fact that it will be
at
>> > least twice (if not more) s fast as her G4 466 Mac, this will be more
>than
>> > enough for her current needs with Photoshop, Illustrator, Pagemaker,
>etc.
>> >
>> > Since I keep my computers set up on open SenFu test benches in a machine
>> > room, what I'm going to do is buy a good, quiet case, PSU, video card,
>audio
>> > card, CD/DVD player/burner, floppy and a big storage drive for her,
>install
>> > the current system drive, mobo and aforementioned componentry into that,
>> > reformat the drive, reload Win XP (so that she's not running the
>*tweaked to
>> > hell* system I'm running now) and buy her the Adobe software that she
>needs
>> > to be productive.
>> >
>> > Next, I'm going to build another native system. I'm going to need a
>mobo,
>> > RAM and a dual core AMD CPU. I'll be interfacing my audio hardware/UAD-1
>> > cards using a Magma 13 slot chassis so I'm not really concerned about
>the
>> > number of PCI s
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #61123 is a reply to message #61122] |
Thu, 08 December 2005 13:26 |
EK Sound
Messages: 939
Registered: June 2005
|
Senior Member |
|
|
lots. One thing I do want to be able to do is to use
my
>two
>> > existing Matrox G450's (AGP and PCI) Due to this, I am leaning toward
>trying
>> > the ASUS A8V-Deluxe mobo just because I'm familiar with the quirks of
>ASUS,
>> > I know that one of the PCI slots will be hardwired to the AGP and I
know
>> > that since the Matrox cards share the same driver, this *should* work
>nicely
>> > with the host card of the Magma using az PCI slot that (hopefully) isn't
>> > sharing an IRQ with any other device, or at least benignly with
>something
>> > friendly. I'm also going to be going with at least 2 gig of DDR in this
>> > machine.....maybe more. Guess I'll check ASUS' site to see what's
>> > recommended.
>> >
>> > Lastly is the CPU. I want to be able to operate this machine as much
as
>> > possible at low latencies with VSTi's. I've been eyeing the dual core
>3800
>> > CPU's because they are the least expensive right now, but skimping will
>> > defeat the whole purpose of this upgrade.
>> >
>> > Is anyone using an AMD dual core CPU system right now? If so, I'd be
>mighty
>> > interested to hear your experiences before I once again descend into
>> > computer building hell.
>> >
>> > Thanks,
>> >
>> > Deej
>> >
>> >
>> >
>
>Deeply sorry Dave, ..eh.. p>.)
--
Martin Harrington
www.lendanear-sound.com
"EK Sound" <spamnot.info@eksoundNO.com> wrote in message
news:43986266$1@linux...
> I'm not Thad, and I'm not from England... ;-)
>
> I was actually suggesting a total nuke and pave, much more reliable than
> converting a drive.
>
> DAVID, from Canada... eh. ;-)
>
> Martin Harrington wrote:
>> I don't think that's quite true Thad.
>> You can convert any drive to NTFS without loosing any data, (just did
>> it).
>>I didn't watch the whole thing, but what I saw was very good. I didn't
realize how versatile Jack was either.
They played some of the songs a bit long for me, but I must say that
they still are a very impressive power trio...tight as can be.
-Michele Hobbs
DC wrote:
> Did you guys see the Royal Albert Hall Cream concert?
>
> Here in the US it has been on public TV recently. Dang, those guys
> can still do it. They look like hell, but man they are playing great.
>
> I never realized how truly impressive Jack Bruce's bass playing was
> years ago. During solos, he actually brings them close to great
> jazz with these amazing bass parts.
>
> I really enjoyed that show. Hope you got to see it.
>
> DCHey Dave,
I did get a new 200 gig drive last night and reinstalled xp and did not add
anything other than the video card and started copying from the fat32 drive
to the new drive and the system copied about 20 gig to the new drive and
powered down and started back up and the window error was back. I had no
drivers installed at this time for the video card I was trying to eliminate
everything possible. Any ideals. the error was BCP1: 3CF70020 of course there
are more numbers if needed
Thanks, David
>SP stands for "Service Pack". SP1 is better for Paris generally, less
>background crap going on. Definitely optimize windows, it will make a
>big difference. Do you use this box for anything other than Paris?
>
>As for copying the files over, first try recording some stuff on the
>OS drive with the FAT drive disconnected to see if some of your
>problems go away. The performance should be a bit less, but if it
>seems more stable, tha FAT drives may be causing the problem.
>
>The files should be able to be copied from FAT to NTFS with no
>trouble. If it does become an issue, you can network two computers
>and drag the files over the network, but I don't think you will have
>to go that far.
>
>David.
>
>David P. wrote:
>
>> Not sure what Sp 1 is? Is this the version # where would I find this?
I haven't
>> tweaked the system since reinstalling XP but I had on the previous install.I
>> think that I will pick up another harddrive and take my 2 audio drives
out.
>> DO you think that there will be any problems when I put the fat32 drives
>> in and copy everything over to the main audio drive?
>> David P
>>
>>
>>>Formatting to NTFS would wipe the drive clean, so it would be a good
>>>idea to drag all the files to another drive before formatting. Are
>>>you running XP SP1 or SP2? Have you tweaked the OS to shut off all
>>>non essential services and fluff?
>>>
>>>David.
>>>
>>>DAVID P wrote:
>>>
>>>
>>>>can't I change these other fat32 drives to ntfs without formating and
>>
>> do I
>>
>>>>have to worry about losing data. My power suppy is 400 watts.I did a
complete
>>>>Paris inst
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #61124 is a reply to message #61122] |
Thu, 08 December 2005 14:33 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
all with the subsytem as well. I forgot to mention earlier
that
>>>>when I started having the problems that I was being prompted to enter
>>
>> a new
>>
>>>>record path when trying to do overdubs.
>>>>Thanks, David P
>>>>
>>>>
>>>>>Some thoughts below:
>>
>>Dimitrios,
Will the Creamware Pulsar allow me 48 channels of ADAT I/0 plus 6 x channels
of s/pdif I/O and 8 channels of analogue I/O, plus sync to incoming Paris
ADAT sync?
This is what I need it to do.
Regards,
Deej
"Dimitrios" <musurgio@otenet.gr> wrote in message news:4398a6aa$1@linux...
>
> Dear DJ,
> Why not try using CreamwarePUlsar card which has "no latency" like Paris
> using its midi drivers with cubase ?
> Also you can use their own samplers (Pulsar's) which load any AKAI sample
> library Piano.
> I am using it that way myself.
> Its a complete hardware system...
> Regards,
> Dimitrios
> Dimitrios
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >Hey Dave............I just ordered an A8V-Deluxe, 2G Corsair XMS
unbuffered
> >and AMD 64 x 2 4200. After checking the UAD-1 forum and RME recommended
> >info, this looked like the most compatible/stable mobo if using AMD
CPU's.
> >
> >Hopefully I'll be able to track at 1.5 ms latency using VSTi's with my
> >MAudiio Prostation 88 keyboard. I've been having to track keyboards using
> my
> >Ensoniq MR Rack to record midi and then add the VSTi later. This has
created
> >some problems with primadonna keyboard players who get all wierd if they
> >can't use Bosendorfer samples, etc. while tracking. what's with the
> >musicians anyway ;o)?
> >
> >I'm going to run it off the existing IDE drives initially, but I'll
likely
> >get myself a couple or Raptors eventually.
> >
> >Here goes.....AMI bios and all.
> >
> >Deej
> >
> >
> >
> >"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
> >news:43934838@linux...
> >> Hi DJ,
> >>
> >> The machine I just built for Nuendo is an A8V Deluxe with an
> >> Athlon 64 X2 4800 and 2 gigs of Kingston RAM. I'm liking it
> >> so far, but I haven't taxed it yet, so I'm not sure where
> >> the break point is. I did a simple test recording 24 tracks
> >> at 44.1/24, played those back and recorded 24 more, played
> >> all that back and punched in and out repeatedly on the last
> >> 24. The CPU indicator in Nuendo didn't get past ONE light.
> >> Then I added a bunch of native and UA plus to the tracks
> >> (at least 30 plugs, most of them different). I played back
> >> the 48 tracks and punched in and out of 24 tracks with the
> >> plugs running. The CPU indicator never got past 4 bars.
> >> Oh, and I'm only running XP home (not 64), and standard IDE
> >> drives! :-)
> >>
> >> David.
> >>
> >> DJ wrote:
> >> > Wife definitely wants to abandon Mac and switch to Windows. I may fix
> it
> >up,
> >> > hang an MBox or an 001 off of it and advertize that I have Pro Tools
> >here
> >> > ;o}
> >> >
> >> > My current native audio system is running an AMD XP3000 CPU on a
333MHZ
> >> > system bus with 2 x gigs of RAM. Considering the fact that it will be
> at
> >> > least twice (if not more) s fast as her G4 466 Mac, this will be more
> >than
> >> > enough for her current needs with Photoshop, Illustrator, Pagemaker,
> >etc.
> >> >
> >> > Since I keep my computers set up on open SenFu test benches in a
machine
> >> > room, what I'm going to do is buy a good, quiet case, PSU, video
card,
> >audio
> >> > card, CD/DVD player/burner, floppy and a big storage drive for her,
> >install
> >> > the current system drive, mobo and aforementioned componentry into
that,
> >> > reformat the drive, reload Win XP (so that she's not running the
> >*tweaked to
> >> > hell* system I'm running now) and buy her the Adobe software that she
> >needs
> >> > to be productive.
> >> >
> >> > Next, I'm going to build another native system. I'm going to need a
> >mobo,
> >> > RAM and a dual core AMD CPU. I'll be interfacing my audio
hardware/UAD-1
> >> > cards using a Magma 13 slot chassis so I'm not really concerned about
> >the
> >> > number of PCI slots. One thing I do want to be able to do is to use
> my
> >two
> >> > existing Matrox G450's (AGP and PCI) Due to this, I am leaning toward
> >trying
> >> > the ASUS A8V-Delu
|
|
|
|
| Re: OK...new computer.....here's the plan...and a question [message #61128 is a reply to message #61124] |
Thu, 08 December 2005 15:06 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
ng solos, he actually brings them close to great
>>> jazz with these amazing bass parts.
>>>
>>> I really enjoyed that show. Hope you got to see it.
>>>
>>> DC
>Hey Deej! I'll put you out of your mac misery, you can send you old dead
mac to me, I'll take care of it for you!
Sorry, I won't be able to help you out with the therapy part though; )
James
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Ok .........so I totally lied. Looks like the *^%$&^+*% Mac is gonna grow
>some new legs. Just ordered a 2 GHz CPU upgrade and a new HD for this 'ol
>133MHz doggiebus POS. Maybe next year I'll go on and do this but there's
too
>much happening right now to go through the whole rigamarole of switching
>OS'es/platforms/buying new compatible PC software, etc.
>
>Never believe a word I say........oh yeah..........and BTW............I
love
>Macs.
>
>;o)
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:43926a77$1@linux...
>> My wife's G4 is giving up. I've never been so glad to see a computer to
>crap
>> out in my whole life. I'm gonna build her a *real* computer now.
>>
>> Sorry.......I know this sounds awful and I do love and respect my Mac
>> bretherin here, but I just hate Macs and the whole *Macmoneymerrygoround*
>> with such a passion ...........
>>
>> anyway........I couldn't have asked for a nicer Christmas present.
>>
>>
>>
>>
>>
>
>I think you are experiencing the same problem I did with FAT
and XP... Try finish setting the machine up with just the
NTFS drive for now and see how it works. If you still have
problems without the FAT drive connected you may have an
actual hardware issue.
David.
DAVID P wrote:
> Hey Dave,
> I did get a new 200 gig drive last night and reinstalled xp and did not add
> anything other than the video card and started copying from the fat32 drive
> to the new drive and the system copied about 20 gig to the new drive and
> powered down and started back up and the window error was back. I had no
> drivers installed at this time for the video card I was trying to eliminate
> everything possible. Any ideals. the error was BCP1: 3CF70020 of course there
> are more numbers if needed
>
> Thanks, David
>
>>SP stands for "Service Pack". SP1 is better for Paris generally, less
>>background crap going on. Definitely optimize windows, it will make a
>>big difference. Do you use this box for anything other than Paris?
>>
>>As for copying the files over, first try recording some stuff on the
>>OS drive with the FAT drive disconnected to see if some of your
>>problems go away. The performance should be a bit less, but if it
>>seems more stable, tha FAT drives may be causing the problem.
>>
>>The files should be able to be copied from FAT to NTFS with no
>>trouble. If it does become an issue, you can network two computers
>>and drag the files over the network, but I don't think you will have
>>to go that far.
>>
>>David.
>>
>>David P. wrote:
>>
>>
>>>Not sure what Sp 1 is? Is this the version # where would I find this?
>
> I haven't
>
>>>tweaked the system since reinstalling XP but I had on the previous install.I
>>>think that I will pick up another harddrive and take my 2 audio drives
>
> out.
>
>>>DO you think that there will be any problems when I put the fat32 drives
>>>in and copy everything over to the main audio drive?
>>>David P
>>>
>>>
>>>
>>>>Formatting to NTFS would wipe the drive clean, so it would be a good
>>>>idea to drag all the files to another drive before formatting. Are
>>>>you running XP SP1 or SP2? Have you tweaked the OS to shut off all
>>>>non essential services and fluff?
>>>>
>>>>David.
>>>>
>>>>DAVID P wrote:
>>>>
>>>>
>>>>
>>>>>can't I change these other fat32 drives to ntfs without formating and
>>>
>>>do I
>>>
>>>
>>>>>have to worry about losing data. My power suppy is 400 watts.I did a
>
> complete
>
>>>>>Paris install with the subsytem as well. I forgot to mention earlier
>
> that
>
>>>>>when I started having the problems that I was being prompted to enter
>>>
>>>a new
>>>
>>>
>>>>>record path when trying to do overdubs.
>>>>>Thanks, David P
>>>>>
>>>>>
>>>>>
>>>>>>Some thoughts below:
>>>
>>>
>Great news Chris
;o)
"Chris Latham" <latham_c@bellsouth.net> wrote in message
news:4397c285@linux...
> Hey folks,
>
> If you're in the US, BMG label group has just released "Sounds of the
> Season" a country collection, with various artists from the BMG Nashville
> label roster, exclusively for Target stores. It's actually a pretty good
> Christmas record, some old, some new, with some pretty good performances.
> Anyway, Phil Vassar threw me a bone, and let me mix his contribution to
the
> record, "Let's Make a Little Christmas Tonight". It's the first mix that
> I've done in Paris that was commercailly released. Everything else I've
> done to date has been mixed on a console. Pray for me over the
holidays...
> I'm going to try to migrate one of my rigs to XP.
>
> CL
>
>I've always been a FAT guy m'self. I'm FATting my Win XP drive for Cubase SX
once I get a new one in here.
Just call me DJ FATs
"Dave(EK Sound)" <
|
|
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Sat Nov 23 20:50:56 PST 2024
Total time taken to generate the page: 0.05222 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
