|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Athlon XP 3200 Chip Problem [message #95934 is a reply to message #95927] |
Thu, 14 February 2008 08:41   |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
Don't forget, some BIOS' allow YOU to pick the shutdown temp...
you might check that first, to see if perhaps it's set too low
- obviously you don't want to set it too high because then in
the event of an overheat, you'll be facing meltdown instead of
shutdown, but I had a mobo wherein the BIOS defualted to a much-
too-low shutdown temp for the CPU I was using & I was able to
change it.
Neil
"Rich Lamanna" <richard.lamanna@verizon.net> wrote:
>Deej, I downloaded the user guide from Asus and it does support the Barton
>Chip, which I believe is the 3200 mhz chip. I can get the computer to post,
>but now I have a temp. problem. The auto shutdown feature in the bios turns
>off the computer. I've got to find out what the max. temp. allowable for
the
>cpu is.
>
>Rich
>
>"Deej" <noway@jose.net> wrote in message news:47b260a4$1@linux...
>> I think the XP 3000 is the fastest CPU that will work wit this mobo.
>>
>>
>> "Rich Lamanna" <richard.lamanna@verizon.net> wrote in message
>> news:47b2602b$1@linux...
>> >I am setting up a new box, using an ASUS A7V8X-X mobo. The bios won't
>> > recognize the processor, Athlon xp 3200. The fastest the mobo will allow
>> > the
>> > processor to run is 700mhz. Do I need to overclock the processor on
this
>> > mobo, or should it recognize the Barton processor without any tweaking?
>> > Appreciate any help.
>> >
>> > Thanks,
>> > Rich
>> >
>> >
>>
>>
>
>
|
|
|
|
| Re: Athlon XP 3200 Chip Problem [message #96025 is a reply to message #95934] |
Sat, 16 February 2008 09:10 |
Rich Lamanna
Messages: 316
Registered: February 2006
|
Senior Member |
|
|
Good idea. Yes the bios does allow modification of the shutdown temp. I
haven't found out what the highest temp. the chip can run at before it melts
down. Right now it seems to be working fine, but I had to clock it slower
that it its normal speed.
Thanks,
Rich
"Neil" <OIUOIU@OIU.com> wrote in message news:47b4611a$1@linux...
>
> Don't forget, some BIOS' allow YOU to pick the shutdown temp...
> you might check that first, to see if perhaps it's set too low
> - obviously you don't want to set it too high because then in
> the event of an overheat, you'll be facing meltdown instead of
> shutdown, but I had a mobo wherein the BIOS defualted to a much-
> too-low shutdown temp for the CPU I was using & I was able to
> change it.
>
> Neil
>
>
> "Rich Lamanna" <richard.lamanna@verizon.net> wrote:
> >Deej, I downloaded the user guide from Asus and it does support the
Barton
> >Chip, which I believe is the 3200 mhz chip. I can get the computer to
post,
> >but now I have a temp. problem. The auto shutdown feature in the bios
turns
> >off the computer. I've got to find out what the max. temp. allowable for
> the
> >cpu is.
> >
> >Rich
> >
> >"Deej" <noway@jose.net> wrote in message news:47b260a4$1@linux...
> >> I think the XP 3000 is the fastest CPU that will work wit this mobo.
> >>
> >>
> >> "Rich Lamanna" <richard.lamanna@verizon.net> wrote in message
> >> news:47b2602b$1@linux...
> >> >I am setting up a new box, using an ASUS A7V8X-X mobo. The bios won't
> >> > recognize the processor, Athlon xp 3200. The fastest the mobo will
allow
> >> > the
> >> > processor to run is 700mhz. Do I need to overclock the processor on
> this
> >> > mobo, or should it recognize the Barton processor without any
tweaking?
> >> > Appreciate any help.
> >> >
> >> > Thanks,
> >> > Rich
> >> >
> >> >
> >>
> >>
> >
> >
>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
