Home » The PARIS Forums » PARIS: Main » MIDI Hell
|
|
|
|
|
|
|
|
|
|
|
|
| Re: MIDI Hell [message #55174 is a reply to message #55169] |
Sat, 02 July 2005 11:44   |
Colonel Panic
Messages: 11
Registered: July 2005
|
Junior Member |
|
|
/>
>
>
>
>
>
>
>I would do this with a 3rd party sequencer. Recording midi into Paris is
such a nightmare.
"Colonel Panic" <Panic@home.nowhere> wrote in message
news:42c6e0a7$1@linux...
>
> Cool. I think that may work.
>
> Here's exactly what I want to do:
>
> Use one of these:
>
> http://www.rogerlinndesign.com/products/adrenalinn2.shtml
>
> with PARIS.
>
> It has only 2 outputs, so you either actually use the drums mixed
> with the effected guitar for the final track (ouch!) or you track the
> drums first, then the effected guitar (using their very cool beat-
> synched fx) seperately with MIDI clocking the AdrenaLinn from
> Paris, then replace the drum track with an actual human.
>
> So, I need to record MIDI at the same time as the drum track.
>
> Do you think the Midex will let me do this in Paris and then play it
> back to control the AdrenaLinn while tracking guitar?
>
> I wouldn't go through all this if the AdrenaLinn wasn't so darn cool.
>
> thanks
>
> Panic
>
>
> "Mr Simplicity" <animix_spamless_@animas.net> wrote:
> >There is no midi interface integrated into the Paris hardware. My
> >suggestion, based on a post by one of our own who had midi sync working
> >flawlessly between Paris and Nuendo on a second computer, would be to
> >purchase a Steinberg Midex unit. Once the hardware is installed, the
driver
> >will show in the midi devices menu of the Paris application. Choose the
> >Mides midi out as the master and attach a midi cable to the midi in of
your
> >slave device and set the software application to slave to incoming midi
> >timecode and choose the midi input that is connected to the Midex midi
out
> >to be the receiving port.
> >
> >You can also achieve sample accurate sync by slaving a third party device
> >that has a 9 pin ADAT sync input port to ADAT timecode being broadcast
from
> >a Paris ADAT module.........if you can find one.
> >
> >Deej
> >
> >
> >
> >"Colonel Panic" <Panic@home.nowhere> wrote in message
> >news:42c6a2c6$1@linux...
> >>
> >> Thanks. I saw all the stuff on that when I looked through the
> >> various sites on Paris. The trouble is, I can't get MIDI out of the
> >> MEC to clock anything else with.
> >>
> >> I wonder if there is a MIDI - Sp/dif convertor somewhere so I could
> >> record MIDI as an audio track.
> >>
> >> hmmmm
> >>
> >> Panic
> >>
> >> rick <parnell68@hotmail.com> wrote:
> >> >i believe you can only load midi files and play them back. the set up
> >> >for this is in the project window.
> >> >
> >> >On 2 Jul 2005 06:56:17 +1000, "Colonel Panic" <Report message to a moderator
|
|
|
|
|
|
| Re: MIDI Hell [message #55177 is a reply to message #55174] |
Sat, 02 July 2005 13:53 |
Deej [3]
Messages: 181
Registered: June 2005
|
Senior Member |
|
|
output SMPTE via MIDI time code. Check the manual for deatils
>>>on how to do this. I'm not at my PARIS PC, and I'm afraid that I'll give
>>>you inacurate directions if I try to.
>>>
>>>MIDI Time code is SMTE sent via MIDI commands. It's not sample accurate,
>>>and I find that it drifts if PARIS gets overloaded with lots of DX plugins.
>>>
>>>What I do, is record a SMPTE stripe on a track in PARIS and play that
back
>>>through an old MIDIMAN Smart Sync which converts the track to MTC. I
then
>>>feed the MTC into a seperate PC running Windows 98 and Cakewalk Pro 9.
>
>>I
>>>believe that the Smartsync can be set to output MIDI clocks instead of
>MTC,
>>>so that might be an option for you.
>>>
>>>Good luck!
>>>
>>>Mike
>>>
>>>
>>>
>>>"Colonel Panic" <Panic@home.nowhere> wrote:
>>>>
>>>>Thanks. I saw all the stuff on that when I looked through the
>>>>various sites on Paris. The trouble is, I can't get MIDI out of the
>
>>>>MEC to clock anything else with.
>>>>
>>>>I wonder if there is a MIDI - Sp/dif convertor somewhere so I could
>>>>record MIDI as an audio track.
>>>>
>>>>hmmmm
>>>>
>>>>Panic
>>>>
>>>>rick <parnell68@hotmail.com> wrote:
>>>>>i believe you can only load midi files and play them back. the set
up
>>>>>for this is in the project window.
>>>>>
>>>>>On 2 Jul 2005 06:56:17 +1000, "Colonel Panic" <Panic@home.nowhere>
>>>>>wrote:
>>>>>
>>>>>>
>>>>>>You all have probably all been through this, so maybe you can help
me.
>>>>>>
>>>>>>How do you record and playback MIDI info in Paris 3.0?
>>>>>>
>>>>>>Say you want to sync a Synth box to paris using MIDI clock.
>>>>>>
>>>>>>Can this be done? There doesn't appear to be any way to get MIDI
signal
>>>>>>in and out of PARIS.
>>>>>>
>>>>>>TIA
>>>>>>
>>>>>>Panic
>>>>>
>>>>
>>>
>>
>Jesus. You're a sucker for punishment, I'd say.
All the different flavors of fuzzy baby have their drawbacks, I suppose...
Jimmy
"Mr Simplicity" <animix_spamless_@animas.net> wrote in message
news:42c6e065$1@linux...
> Most readily obeyed commands-
>
> Lie down on the couch-GOOD DOG!!!!
>
> Eat that dried pig ear-GOOD DOG!!!!
>
> Chew on that giant rawhide bone-GOOD DOG!!!!
>
> Big yawn-GOOD DOG!!!!
>
> Stretch-GOOD DOG!!!!!
>
> Watch TV all day-GOOD DOG!!!!!
>
> Intimidate the ****out of the mailman-GOOD DOG!!!!
>
> Dig a hole in the back yard that is deep enough from me to fall into and
> disappear-GOOD DOG!!!!!
>
> Roll in something dead-GOOD DOG!!!!
>
> Kill that skunk-GOOD DOG
>
> Eat the cat food-GOOD DOG!!!!!
>
> Chase the cat-GOOD DOG!!!!
>
> Jump up on the bed after I've gone to sleep and step on my head-GOOD
DOG!!!!
>
> Eat $200.00 worth of food a month-GOOD DOG!!!!!
>
> Steal a loaf of bread off the kitchen counter-GOOD DOG!!!!
>
> Steal a pound of butter off the kitchen counter-GOOD DOG!!!!!
>
> Steal a pound of cheese off the counter-GOOD DOG!!!!
>
> Steal a brisket off the kitchen counter and eat it on the living room
|
|
|
|
| Re: MIDI Hell [message #55179 is a reply to message #55175] |
Sat, 02 July 2005 14:22 |
Mike Audet
Messages: 294
Registered: December 2008
|
Senior Member |
|
|
DOG!!!!!
> > >
> > > Steal a loaf of bread off the kitchen counter-GOOD DOG!!!!
> > >
> > > Steal a pound of butter off the kitchen counter-GOOD DOG!!!!!
> > >
> > > Steal a pound of cheese off the counter-GOOD DOG!!!!
> > >
> > > Steal a brisket off the kitchen counter and eat it on the living room
> > > carpet-GOOD DOG!!!!
> > >
> > > Drink out of your bowl and then walk up and drool all over me-GOOD
DOG!
> > >
> > > Drink out of the toilet and then walk up and drool all over me-GOOD
DOG!
> > >
> > > Bark feriociously at any sound that you hear within 100 meters of the
> > > house
> > > between midnight and sunrise and literally vibrate the walls to the
> point
> > > where I am bounced out of bed-GOOD DOG!!!!!!!
> > >
> > > Pretend that my favorite pillow is a rabbit that you need to kill-GOOD
> > > DOG!!!!
> > >
> > > There are other commands that they will obey also, but these are the
> best
> > > ones when you really need instant obedience.
> > >
> > > ;o)
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>Ok. I read your post again. The problem is that the delay effects need to
be in sync with the drums. I get it.
It doesn't look like this box syncs to anything. If it did, I'm sure that
MTC, SMPTE ot Clocks would have been somewhere in the manual.
You'll have to track them both at one to have them in sync.
All the best,
Mike
"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
>
>I read your post to Mr. Simlicity, but I'm not completely sure what you're
>looking to do.
>
>I downloaded the manual for the box you are looking to buy and searched
it
>for SMPTE, Clocks, and MTC, and none of them are in the manual. Are you
>sure that it can follow MIDI? It looks like it just plays pre-configured
>beats over and over to its own internal clock.
>
>If I undestand what you're trying to do right, I'd record this amp simulators
>pre-sequenced beat into PARIS on two tracks, and then overdub my guitars
>overtop on two other tracks on a second pass. That way, you don't need
to
>sync anything.
>
>Forgive me if I'm misunderstanding what you're trying to do. I don't know
>this Amp simulator at all.
>
>Good luck!
>Mike
>
>
>"Colonel Panic" <Panic@home.nowhere> wrote:
>>
>>Thanks Mike,
>>
>>What do you think of the scenario I described to Mr. Simplicity?
>>
>>Would it work?
>>
>>Panic
>>
>>
>>"Mike Audet" <mike@....com> wrote:
>>>
>>>Actually, I doubt that the Smartsync can output MIDI clocks. You'd have
>>to
>>>be able to tell it the tempo somehow.
>>>
>>>I'd sync Cakwalk vis MTC and have it generate MIDI clocks if you really
>>want
>>>to use your keyboard as a sequencer. it would be easier to just use Cakewalk
>>>as your sequencer, though.
>>>
>>>All the best,
>>>Mike
>>>
>>>
>>>"Mike Audet" <mike@.....com> wrote:
>>>>
>>>>Hi Panic,
>>>>
>>>>It doesn't sound to me like you have a complete undestanding of how to
>>synch
>>>>2 devices via MIDI.
>>>>
>>>>You mentioned MIDI clocks, which was a cheap way to synch two devices
>for
>>>>people who could not afford smpte when MIDI programs had to be synced
>to
>>>>tape decks. PARIS doesn't support this.
>>>>
>>>>PARIS can output SMPTE via MIDI time code. Check the manual for deatils
>>>>on how to do this. I'm not at my PARIS PC, and I'm afraid that I'll
give
>>>>you inacurate directions if I try to.
>>>>
>>>>MIDI Time code is SMTE sent via MIDI commands. It's not sample accurate,
>>>>and I find that it drifts if PARIS gets overloaded with lots of DX plugins.
>>>>
>>>>What I do, is record a SMPTE stripe on a track in PARIS and play that
>back
>>>>through an old MIDI
|
|
|
|
| Re: MIDI Hell [message #55182 is a reply to message #55179] |
Sat, 02 July 2005 14:25 |
Mike Audet
Messages: 294
Registered: December 2008
|
Senior Member |
|
|
MIDI programs had to be synced
>>to
>>>>>tape decks. PARIS doesn't support this.
>>>>>
>>>>>PARIS can output SMPTE via MIDI time code. Check the manual for deatils
>>>>>on how to do this. I'm not at my PARIS PC, and I'm afraid that I'll
>give
>>>>>you inacurate directions if I try to.
>>>>>
>>>>>MIDI Time code is SMTE sent via MIDI commands. It's not sample accurate,
>>>>>and I find that it drifts if PARIS gets overloaded with lots of DX plugins.
>>>>>
>>>>>What I do, is record a SMPTE stripe on a track in PARIS and play that
>>back
>>>>>through an old MIDIMAN Smart Sync which converts the track to MTC.
I
>>then
>>>>>feed the MTC into a seperate PC running Windows 98 and Cakewalk Pro
9.
>>>
>>>>I
>>>>>believe that the Smartsync can be set to output MIDI clocks instead
of
>>>MTC,
>>>>>so that might be an option for you.
>>>>>
>>>>>Good luck!
>>>>>
>>>>>Mike
>>>>>
>>>>>
>>>>>
>>>>>"Colonel Panic" <Panic@home.nowhere> wrote:
>>>>>>
>>>>>>Thanks. I saw all the stuff on that when I looked through the
>>>>>>various sites on Paris. The trouble is, I can't get MIDI out of the
>>>
>>>>>>MEC to clock anything else with.
>>>>>>
>>>>>>I wonder if there is a MIDI - Sp/dif convertor somewhere so I could
>>>>>>record MIDI as an audio track.
>>>>>>
>>>>>>hmmmm
>>>>>>
>>>>>>Panic
>>>>>>
>>>>>>rick <parnell68@hotmail.com> wrote:
>>>>>>>i believe you can only load midi files and play them back. the set
>>up
>>>>>>>for this is in the project window.
>>>>>>>
>>>>>>>On 2 Jul 2005 06:56:17 +1000, "Colonel Panic" <Panic@home.nowhere>
>>>>>>>wrote:
>>>>>>>
>>>>>>>>
>>>>>>>>You all have probably all been through this, so maybe you can help
>>me.
>>>>>>>>
>>>>>>>>How do you record and playback MIDI info in Paris 3.0?
>>>>>>>>
>>>>>>>>Say you want to sync a Synth box to paris using MIDI clock.
>>>>>>>>
>>>>>>>>Can this be done? There doesn't appear to be any way to get MIDI
>>signal
>>>>>>>>in and out of PARIS.
>>>>>>>>
>>>>>>>>TIA
>>>>>>>>
>>>>>>>>Panic
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>Hi All,
I'm looking for the presets for the Mod pack. Anyone have them?
Thanks in advance,
MikeI think that actually, we are owned by two great danes.
;o)
"uptown jimmy" <johnson314@bellsouth.net> wrote in message
news:42c705d4@linux...
> Jesus. You're a sucker for punishment, I'd say.
>
> All the different flavors of fuzzy baby have their drawbacks, I suppose...
>
> Jimmy
>
>
> "Mr Simplicity" <animix_spamless_@animas.net> wrote in message
> news:42c6e065$1@linux...
> > Most readily obeyed commands-
> >
> > Lie down on the couch-GOOD DOG!!!!
> >
> > Eat that dried pig ear-GOOD DOG!!!!
> >
> > Chew on that giant rawhide bone-GOOD DOG!!!!
> >
> > Big yawn-GOOD DOG!!!!
> >
> > Stretch-GOOD DOG!!!!!
> >
> > Watch TV all day-GOOD DOG!!!!!
> >
> > Intimidate the ****out of the mailman-GOOD DOG!!!!
> >
> > Dig a hole in the back yard that is deep enough from me to fall into and
> > disappear-GOOD DOG!!!!!
> >
> > Roll in something dead-GOOD DOG!!!!
> >
> > Kill that skunk-GOOD DOG
> >
> > Eat the cat food-GOOD DOG!!!!!
> >
> > Chase the cat-GOOD DOG!!!!
> >
> > Jump up on the bed after I've gone to sleep and step on my head-GOOD
> DOG!!!!
> >
> > Eat $200.00 worth of food a month-GOOD DOG!!!!!
> >
> > Steal a loaf of bread off the kitchen counter-GOOD DOG!!!!
> >
> > Steal a pound of butter off the kitchen counter-GOOD DOG!!!!!
> >
> > Steal a pound of cheese off the counter-GOOD DOG!!!!
> >
> > Steal a brisket off the kitchen counter and eat it on the living room
> > carpet-GOOD DOG!!!!
> >
> > Drink out of your bowl and then walk up and drool all over me-GOOD DOG!
> >
> > Drink out of the toilet and then walk up and drool all over me-GOOD DOG!
> >
> > Bark feriociously at any sound that you hear within 100 meters of the
> house
> > between midnight
|
|
|
|
| Re: MIDI Hell [message #55183 is a reply to message #55182] |
Sat, 02 July 2005 14:30 |
Mike Audet
Messages: 294
Registered: December 2008
|
Senior Member |
|
|
and sunrise and literally vibrate the walls to the
point
> > where I am bounced out of bed-GOOD DOG!!!!!!!
> >
> > Pretend that my favorite pillow is a rabbit that you need to kill-GOOD
> > DOG!!!!
> >
> > There are other commands that they will obey also, but these are the
best
> > ones when you really need instant obedience.
> >
> > ;o)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>Thanks Mike,
Is it possible to generate MIDI clock in Paris, at a certain BPM and
output it with a MIDI interface to the AdrenaLinn?
Isn't Cakewalk PC-only? I am on a Mac G3.
And....
Why the heck can't I record MIDI into the Sp/dif port and call it an
audio track, then output it back to clock an external box?
There's got to be a way to convert MIDI to Sp/dif...
Dang... I am resisting buying Logic... I realy like Paris, but this
sort of stuff is a pain..
thanks guys!
Panic
"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
>
>Ok, I take it all back. It follows MIDI Clocks (note the capital C that
got
>missed in my search).
>
>You'll need Cakewalk following SMPTE from PARIS and outputting MIDI clocks.
> Then you can record the drums first and have the delay effects in time
in
>a subsequent pass.
>
>You need:
>
>Cakewalk Professional 5.5 or later and a MIDI interface.
>
>Good luck!
>Mike
>
>
>
>"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
>>
>>Ok. I read your post again. The problem is that the delay effects need
>to
>>be in sync with the drums. I get it.
>>
>>It doesn't look like this box syncs to anything. If it did, I'm sure that
>>
>>You'll have to track them both at one to have them in sync.
>>
>>All the best,
>>Mike
>>
>>"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
>>>
>>>I read your post to Mr. Simlicity, but I'm not completely sure what you're
>>>looking to do.
>>>
>>>I downloaded the manual for the box you are looking to buy and searched
>>it
>>>for SMPTE, Clocks, and MTC, and none of them are in the manual. Are you
>>>sure that it can follow MIDI? It looks like it just plays pre-configured
>>>beats over and over to its own internal clock.
>>>
>>>If I undestand what you're trying to do right, I'd record this amp simulators
>>>pre-sequenced beat into PARIS on two tracks, and then overdub my guitars
>>>overtop on two other tracks on a second pass. That way, you don't need
>>to
>>>sync anything.
>>>
>>>Forgive me if I'm misunderstanding what you're trying to do. I don't
know
>>>this Amp simulator at all.
>>>
>>>Good luck!
>>>Mike
>>>
>>>
>>>"Colonel Panic" <Panic@home.nowhere> wrote:
>>>>
>>>>Thanks Mike,
>>>>
>>>>What do you think of the scenario I described to Mr. Simplicity?
>>>>
>>>>Would it work?
>>>>
>>>>Panic
>>>>
>>>>
>>>>"Mike Audet" <mike@....com> wrote:
>>>>>
>>>>>Actually, I doubt that the Smartsync can output MIDI clocks. You'd
have
>>>>to
>>>>>be able to tell it the tempo somehow.
>>>>>
>>>>>I'd sync Cakwalk vis MTC and have it generate MIDI clocks if you really
>>>>want
>>>>>to use your keyboard as a sequencer. it would be easier to just use
>Cakewalk
>>>>>as your sequencer, though.
>>>>>
>>>>>All the best,
>>>>>Mike
>>>>>
>>>>>
>>>>>"Mike Audet" <mike@.....com> wrote:
>>>>>>
>>>>>>Hi Panic,
>>>>>>
>>>>>>It doesn't sound to me like you have a complete undestanding of how
>to
>>>>synch
>>>>>>2 devices via MIDI.
>>>>>>
>>>>>>You mentioned MIDI clocks, which was a cheap way to synch two devices
>>>for
>>>>>>people who could not afford smpte when MIDI programs had to be synced
>>>to
>>>>>>tape decks. PARIS doesn't support this.
>>>>>>
>>>>>>PARIS can output SMPTE via MIDI time code. Check the manual for deatils
>>>>>>on how to do this. I'm not at my PARIS PC, and I'm afraid that I'll
>>give
>>>>>>you inacurate directions if I try to.
>>>>>>
>>>>>>MIDI Time code is SMTE sent via MIDI commands. It's not sample accurate,
>>>>>>and I find that it drifts if PARIS gets overloaded with lots of DX
plugins.
>>>>>>
>>>>>>What I do, is record a SMPTE stripe on a track in PARIS and play that
>>>back
>>>>>>through an old MIDIMAN Smart Sync which converts the track to MTC.
>I
>>>then
>>>>>>feed the MTC into a seperate PC running Windows 98 and Cakewalk Pro
>9.
>>>>
>>>>>I
>>>>>>believe that the Smartsync can be set to output MIDI clocks instead
>of
>>>>MTC,
>>>>>>so that might be an option for you.
>>>>>>
>>>>>>Good luck!
>>>>>>
>>>>>>Mike
>>>>>>
>>>>>>
>>>>>>
>>>>>>"Colonel Panic" <Panic@home.nowhere> wrote:
>>>>>>>
>>>>>>>Thanks. I saw all the stuff on that when I looked through the
>>>>>>>various sites on Paris. The trouble is, I can't get MIDI out of
the
>>>>
>>
|
|
|
|
| Re: MIDI Hell [message #55186 is a reply to message #55183] |
Sat, 02 July 2005 15:21 |
Colonel Panic
Messages: 11
Registered: July 2005
|
Junior Member |
|
|
r />
> >
> >Ok, I take it all back. It follows MIDI Clocks (note the capital C that
> got
> >missed in my search).
> >
> >You'll need Cakewalk following SMPTE from PARIS and outputting MIDI
clocks.
> > Then you can record the drums first and have the delay effects in time
> in
> >a subsequent pass.
> >
> >You need:
> >
> >Cakewalk Professional 5.5 or later and a MIDI interface.
> >
> >Good luck!
> >Mike
> >
> >
> >
> >"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
> >>
> >>Ok. I read your post again. The problem is that the delay effects need
> >to
> >>be in sync with the drums. I get it.
> >>
> >>It doesn't look like this box syncs to anything. If it did, I'm sure
that
> >>
> >>You'll have to track them both at one to have them in sync.
> >>
> >>All the best,
> >>Mike
> >>
> >>"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
> >>>
> >>>I read your post to Mr. Simlicity, but I'm not completely sure what
you're
> >>>looking to do.
> >>>
> >>>I downloaded the manual for the box you are looking to buy and searched
> >>it
> >>>for SMPTE, Clocks, and MTC, and none of them are in the manual. Are
you
> >>>sure that it can follow MIDI? It looks like it just plays
pre-configured
> >>>beats over and over to its own internal clock.
> >>>
> >>>If I undestand what you're trying to do right, I'd record this amp
simulators
> >>>pre-sequenced beat into PARIS on two tracks, and then overdub my
guitars
> >>>overtop on two other tracks on a second pass. That way, you don't need
> >>to
> >>>sync anything.
> >>>
> >>>Forgive me if I'm misunderstanding what you're trying to do. I don't
> know
> >>>this Amp simulator at all.
> >>>
> >>>Good luck!
> >>>Mike
> >>>
> >>>
> >>>"Colonel Panic" <Panic@home.nowhere> wrote:
> >>>>
> >>>>Thanks Mike,
> >>>>
> >>>>What do you think of the scenario I described to Mr. Simplicity?
> >>>>
> >>>>Would it work?
> >>>>
> >>>>Panic
> >>>>
> >>>>
> >>>>"Mike Audet" <mike@....com> wrote:
> >>>>>
> >>>>>Actually, I doubt that the Smartsync can output MIDI clocks. You'd
> have
> >>>>to
> >>>>>be able to tell it the tempo somehow.
> >>>>>
> >>>>>I'd sync Cakwalk vis MTC and have it generate MIDI clocks if you
really
> >>>>want
> >>>>>to use your keyboard as a sequencer. it would be easier to just use
> >Cakewalk
> >>>>>as your sequencer, though.
> >>>>>
> >>>>>All the best,
> >>>>>Mike
> >>>>>
> >>>>>
> >>>>>"Mike Audet" <mike@.....com> wrote:
> >>>>>>
> >>>>>>Hi Panic,
> >>>>>>
> >>>>>>It doesn't sound to me like you have a complete undestanding of how
> >to
> >>>>synch
> >>>>>>2 devices via MIDI.
> >>>>>>
> >>>>>>You mentioned MIDI clocks, which was a cheap way to synch two
devices
> >>>for
> >>>>>>people who could not afford smpte when MIDI programs had to be
synced
> >>>to
> >>>>>>tape decks. PARIS doesn't support this.
> >>>>>>
> >>>>>>PARIS can output SMPTE via MIDI time code. Check the manual for
deatils
> >>>>>>on how to do this. I'm not at my PARIS PC, and I'm afraid that I'll
> >>give
> >>>>>>you inacurate directions if I try to.
> >>>>>>
> >>>>>>MIDI Time code is SMTE sent via MIDI commands. It's not sample
accurate,
> >>>>>>and I find that it drifts if PARIS gets overloaded with lots of DX
> plugins.
> >>>>>>
> >>>>>>What I do, is record a SMPTE stripe on a track in PARIS and play
that
> >>>back
> >>>>>>through an old MIDIMAN Smart Sync which converts the track to MTC.
>
> >I
> >>>then
> >>>>>>feed the MTC into a seperate PC running Windows 98 and Cakewalk Pro
> >9.
> >>>>
> >>>>>I
> >>>>>>believe that the Smartsync can be set to output MIDI clocks instead
> >of
> >>>>MTC,
> >>>>>>so that might be an option for you.
> >>>>>>
> >>>>>>Good luck!
> >>>>>>
> >>>>>>Mike
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>"Colonel Panic" <Panic@home.nowhere> wrote:
> >>>>>>>
> >>>>>>>Thanks. I saw all the stuff on that when I looked through the
> >>>>>>>various sites on Paris. The trouble is, I can't get MIDI out of
> the
> >>>>
> >>>>>>>MEC to clock anything else with.
> >>>>>>>
> >>>>>>>I wonder if there is a MIDI - Sp/dif convertor somewhere so I could
> >>>>>>>record MIDI as an audio track.
> >>>>>>>
> >>>>>>>hmmmm
> >>>>>>>
> >>>>>>>Panic
> >>>>>>>
> >>>>>>>rick <parnell68@hotmail.com> wrote:
> >>>>>>>>i believe you can only load midi files and play them back. the
set
> >>>up
> >>>>>>>>for this is in the project window.
> >>>>>>>>
> >>>>>>>>On 2 Jul 2005 06:56:17 +1000, "Colonel Panic" <Panic@home.nowhere>
> >>>>>>>>wrote:
> >>>>>>>>
> >>>>>>>>>
> >>>>>>>>>You all have probably all been through this, so maybe you can
help
> >>>me.
> >>>>>>>>>
> >>>>>>>>>How do you record and playback MIDI info in Paris 3.0?
> >>>>>>>>>
> >>>>>>>>>Say you want to sync a Synth box to paris using MIDI clock.
> >>>>>>>>>
> >>>>>>>>>Can this be done? There doesn't appear to be any way to get
MIDI
> >>>signal
> >>>>>>>>>in and out of PARIS.
> >>>>>>>>>
> >>>>>>>>>TIA
> >>>>>>>>>
> >>>>>>>>>Panic
> >>>>>>>>
|
|
|
|
|
|
|
|
| Re: MIDI Hell [message #55193 is a reply to message #55186] |
Sat, 02 July 2005 16:30 |
Mike Audet
Messages: 294
Registered: December 2008
|
Senior Member |
|
|
t;
>>>>>>>>>>Panic
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>This is a multi-part message in MIME format.
---=_linux42c72763
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
A! Stop press. Just found the perfect MB, well, pretty much.
EPOX EP-8KDA3+ PRO. PCI Slot 1 & 5 share, but not with AGP. AGP has its own
interrupt. The only thing stuck sharing with a PCI slot is the firewire,
but that only shares with slot 2, and I can probably make do with only 4
slots, and if I expend beyond 4 slots I can always disable firewire while
using Paris.
Plus, this baby has SPDIF in and out with both coaxial and optical on each.
...mind you I've just noticed that the EDS cards would probably get in
the way of the IDE ports, in two, maybe three slots... mmm... that could
be a problem.
WHY OH WHY IS EVERYTHING ALWAYS SO HARD?!?!
I think I should make a cup of chai tea...
Cheers,
Kim.
"Kim" <hiddensounds@hotmail.com> wrote:
>
>"Kim" <hiddensounds@hotmail.com> wrote:
>
>>Here's a possibility. The MSI AV8.
>
>MSI? Sorry, it seems to be ABIT... ;oP
>
>Erghh.... COFFEE!!!
>
>>
>>Only sizable downside is there's only optical SPDIF outs, so to run audio
>>into Paris I'd need some kind of converter.
>>
>>According to thi diagram it seems you can switch it around to use all of
>>them. That said the note does say that slot 1 shares with the AGP card,
>which
>>I don't quite get. There's no mention anywhere of AGP being able to use
>IRQ
>>C or D.
>>
>>I think this MB might be the go though.
>>
>> http://www2.abit.com.tw/page/au/motherboard/motherboard_deta il.php?pMODEL_NAME=AV8&fMTYPE=Socket%20939&pPRODINFO =Specifications
>>
>>Cheers,
>>Kim.
>>
>>
>
---=_linux42c72763
Content-Type: image/jpeg; name="EPOX_8KDA3 interrupts.JPG"
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename="EPOX_8KDA3 interrupts.JPG"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|
|
|
|
| Re: MIDI Hell [message #55196 is a reply to message #55193] |
Sat, 02 July 2005 17:00 |
Colonel Panic
Messages: 11
Registered: July 2005
|
Junior Member |
|
|
his is in the project window.
>>>>>>>>>>
>>>>>>>>>>On 2 Jul 2005 06:56:17 +1000, "Colonel Panic" <Panic@home.nowhere>
>>>>>>>>>>wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>You all have probably all been through this, so maybe you can
help
>>>>>me.
>>>>>>>>>>>
>>>>>>>>>>>How do you record and playback MIDI info in Paris 3.0?
>>>>>>>>>>>
>>>>>>>>>>>Say you want to sync a Synth box to paris using MIDI clock.
>>>>>>>>>>>
>>>>>>>>>>>Can this be done? There doesn't appear to be any way to get
MIDI
>>>>>signal
>>>>>>>>>>>in and out of PARIS.
>>>>>>>>>>>
>>>>>>>>>>>TIA
>>>>>>>>>>>
>>>>>>>>>>>Panic
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>I tried one of these boards before I got my ASUS board. I had some *major*
issues with it, though it's been so long ago that I don't remember all of
them.......and they could have been related to my Matrox video cards and/or
my SBS chassis
I think Erling uses this successfully though. He's your man, I think.
Deej
"Kim" <hiddensounds@hotmail.com> wrote in message news:42c7282e$1@linux...
>
>
> I'm guessing this wont fit EDS cards. Can someone who pulls their system
> apart often and really knows the size and shape of EDS cards and MBs
confirm
> that you will or wont fit EDS cards into slots 1, 2 and maybe 3 on this
board...
>
> Cheers,
> Kim.Alos........my experience with AMI bios was less than thrilling. Award Bios
is much better, IMHO. MSImobo's use the AMI bios (or they did last time I
looked). I would check this out before I made the jump.
Deej
"Mr Simplicity" <animix_spamless_@animas.net> wrote in message
news:42c72eda@linux...
> I tried one of these boards before I got my ASUS board. I had some *major*
> issues with it, though it's been so long ago that I don't remember all of
> them.......and they could have been related to my Matrox video cards
and/or
> my SBS chassis
>
> I think Erling uses this successfully though. He's your man, I think.
>
> Deej
>
>
>
>
> "Kim" <hiddensounds@hotmail.com> wrote in message news:42c7282e$1@linux...
> >
> >
> > I'm guessing this wont fit EDS cards. Can someone who pulls their system
> > apart often and really knows the size and shape of EDS cards and MBs
> confirm
> > that you will or wont fit EDS cards into slots 1, 2 and maybe 3 on this
> board...
> >
> > Cheers,
> > Kim.
>
>ARGH!! This is getting up my goiter, whatever a goiter is...
Does anybody know for sure whether or not Paris will run on PCI standard
2.3 or not? I suspect not...
Cheers,
Kim.
"Mr Simplicity" <animix_spamless_@animas.net> wrote:
>Alos........my experience with AMI bios was less than thrilling. Award Bios
>is much better, IMHO. MSImobo's use the AMI bios (or they did last time
I
>looked). I would check this out before I made the jump.
>
>Deej
>
>
>"Mr Simplicity" <animix_spamless_@animas.net> wrote in message
>news:42c72eda@linux...
>> I tried one of these boards before I got my ASUS board. I had some *major*
>> issues with it, though it's been so long ago that I don't remember all
of
>> them.......and they could have been related to my Matrox video cards
>and/or
>> my SBS chassis
>>
>> I think Erling uses this successfully though. He's your man, I think.
>>
>> Deej
>>
>>
>>
>>
>> "Kim" <hiddensounds@hotmail.com> wrote in message news:42c7282e$1@linux...
>> >
>> >
>> > I'm guessing this wont fit EDS cards. Can someone who pulls their system
>> > apart often and really knows the size and shape of EDS cards and MBs
>> confirm
>> > that you will or wont fit EDS cards into slots 1, 2 and maybe 3 on this
>> board...
>> >
>> > Cheers,
>> > Kim.
>>
>>
>
>Yes, it is true, and two small fuzzy baby kitties rule my world.
It's disgusting.
And i love it, mostly.
Jimmy
"Mr Simplicity" <animix_spamless_@animas.net> wrote in message
news:42c71161@linux...
> I think that actually, we are owned by two great danes.
>
> ;o)FWIW, it's probably doable. I had to remove the strain relief clips from the
IDE cables to lower their profile. That was on a
different mobo with similar layout.
I'm toying with updating my Paris box too, so keep us posted with your findings.
Regards,
Kim
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>
>
>I'm guessing this wont fit EDS cards. Can someone who pulls their system
>apart often and really knows the size and shape of EDS cards and MBs confirm
>that you will or wont fit EDS cards into slots 1, 2 and maybe 3 on this
board...
>
>Cheers,
>Kim.I ran Paris on a Mac and used FreeMidi/OMS with it - which should sync to
Logic, DP etc on the same machine, and certainly can send MTC to another
computer. However, Paris' midi is one reason I left it for Nuendo. Great
audio DAW, but the midi implementation is just bizarre.
Syncing to another machine works very well should you decide to go that
route - I even ran a MOTU Midi Express XT on a Mac and a PC concurrently as
it has ports for both, and can sync across the ports.
I don't know that I would run Paris with a Midi app at one time on a G3
unless you don't need a lot of native processing (VST plugins).
Regards,
Dedric
On 7/2/05 6:00 PM, in article 42c72a94$1@linux, "Colonel Panic"
<Panic@home.nowhere> wrote:
>
> Thanks for all the thought and help you put into this issue.
>
> I just wanted to play my guitar and now I gotta buy all this stuff...
>
> grrrr
>
> I may still buy the AdrenaLinn and see what I can do with it...
>
> thanks again
>
> Panic
>Well I'm willing to take that as a green light for this MB. I'm just about
doing my head in with this.
But that MB has the best layout of interrupts I've seen. The AGP has it's
own interrupt, and the only PCI slot which shares does so with the onboard
firewire, which could always be disabled if necessary if my Paris setup grew
to require all 5 slots. At the moment I'm only using two slots anyhow, and
I imagine my "dream system" would max out at about 3 EDS cards and a UAD
anyhow. There's not much I do which needs more than that.
So it has:
PCI 2.2 (ie, will take an EDS card)
Slots which don't share interrupts. (thanks deej)
AWARD BIOS (thanks deej)
SPDIF in and out, with both coax and optical outputs.
The only down sides are that it's the old socket 754 standard not the newer
939, and that those EDS cards *might* get in the way of the IDE ports, but
I can probably get around it with a little handy work on the IDE cables (thanks
Kim W).
....which brings forth the question...
....has anybody tried the NForce 3 chipset with Paris?
Cheers,
Kim.
"Kim W." <no@way.com> wrote:
>
>FWIW, it's probably doable. I had to remove the strain relief clips from
the
>IDE cables to lower their profile. That was on a
>different mobo with similar layout.
>I'm toying with updating my Paris box too, so keep us posted with your findings.
>Regards,
>KimWas the one you tried an Athlon 64 board? I thought you only tried Athlon
XP boards? This is the Athlon 64 NForce3 chipset.
Hopefully it doesn't have whatever issues you had in my setup. I think this
is the way I'll be going...
Cheers,
Kim.
"Mr Simplicity" <animix_spamless_@animas.net> wrote:
>I tried one of these boards before I got my ASUS board. I had some *major*
>issues with it, though it's been so long ago that I don't remember all of
>them.......and they could have been related to my Matrox video cards and/or
>my SBS chassis
>
>I think Erling uses this successfully though. He's your man, I think.
>
>Deej
>
>
>
>
>"Kim" <hiddensounds@hotmail.com> wrote in message news:42c7282e$1@linux...
>>
>>
>> I'm guessing this wont fit EDS cards. Can someone who pulls their system
>> apart often and really knows the size and shape of EDS cards and MBs
>confirm
>> that you will or wont fit EDS cards into slots 1, 2 and maybe 3 on this
>board...
>>
>> Cheers,
>> Kim.
>
>Anybody have any experience with the NForce3 ch
|
|
|
|
|
|
|
|
|
|
| Re: MIDI Hell [message #55313 is a reply to message #55279] |
Tue, 05 July 2005 17:21 |
Colonel Panic
Messages: 11
Registered: July 2005
|
Junior Member |
|
|
the like are drive overlay utilities... personally I would
> NEVER put anything important on a drive with an overlay. If the overlay
> gets corrupt, ALL the information is toast... nothing will read the drive.
>
> Use at your own peril!!
>
> David.
>
> Mike R. wrote:
>
>> I just got three fresh 120gb sized Seagate HDs (ata 100)for my Paris rig.
>> Previously, I have worked exclusively with Maxtors. However, due to
>> recent
>> problems with RELIAfrekinBILITY (@#$%%@@@!!!)... I've switched to
>> Seagate:)
>> (By the way, check out www.storagereview.com for a good review of various
>> manufacturers HD's.) Anyhoo, in all my previous installs I've used the
>> Maxtor
>> installation program (Maxblast). The drives I got are not OEM (oops), so
>> I haven't got Seagate's version of Maxblast. I presume Windows can
>> format
>> the disc's just as well, but I'm not sure if this is true and if so, how
>> to go about it. I'm running Win 98SE. One of the drives will be my
>> OS/System
>> drive (though I will be using the extra space on it to store audio
>> files).
>> The other two are for audio files only.
>>
>> Gosh, I should know how to do this by now, but I've been
>> Maxblastorized --and
>> I don't want to mess up my precious bodily data(s) by screwing up an
>> unfamiliar
>> formatting protocol. Thanks.
>> MRI have purchased components in the past from this company and had no
problems. Recently I recommended this company to a friend and helped him
spec a new computer to be built by Monarch. It's been 10 weeks and he has
had nothing but problems with the computer and totally unacceptable
treatment by Monarch throughout the whole ordeal.
I could go into specific detail, but it would be lengthy .........like
asking someone to read Beowulf. It has gotten to the point now that I feel
like a planetary warning is in order."Kim" <hiddensounds@hotmail.com> wrote in message news:42ca159f$1@linux...
>
>
> Just trying to make a plan here for this new machine. Currently I have a
> "Paris Only" boot of XP on my machine which is on a measely 4 Gig
> partition.
> I'm tempted to go 20Gig or so for my Paris only partition, but then, why?
> I mean it fits on 4 Gig happily enough, but I'm paradoid that it will
> somehow
> get bigger.
>
It will. Give it at least 10 from my experience.
> I'm planning to have a whole bunch of seperate boots on this box, so that
> I can mess with things without impacting productivity. A Paris only boot.
> A "general music" boot where I can load Paris plus other music apps. An
> office/publishing
> boot. A gaming bo
|
|
|
|
| Re: MIDI Hell [message #55316 is a reply to message #55313] |
Tue, 05 July 2005 17:46 |
Nappy
Messages: 198
Registered: September 2006
|
Senior Member |
|
|
u give it. Unfortunately it's only designed to mic things
behind the drummer. If you mic something in front of the drummer it comes
through off-phase. Strangely, because you have to mic things behind the drummer
with this mic, even though it's called a football it's only very rare that
somebody uses their foot with it.
Also new, the Soccer Football. This mic can be used on any drum, and was
specially designed for the drummer off Def Leppard, as it gets it's best
sounds from players who don't use their hands at all, and prefer instead
to play with just their feet. It also gets a killer tom sound from any players
you know who do their tom rolls with their heads.
And the Aussie Rules Football...? mmm, that one I'll have to think about.
Cheers,
Kim.
"Neil" <OIUOIU@OIUOIU.com> wrote:
>
>"Kim" <hiddensounds@hotmail.com> wrote:
>>
>>
>>Surely they could have done everyone a favour by called the "kickball"
the
>>"football"... I mean come on!! ;o)
>
>Well, I thought about that one - and i have heard of a kick
>drum referred to as a "foot drum" once or twice, but that's
>pretty rare, innit? But then there's your kind of "Football"
>(the one with a bigger field, and nets), and our kind
>of "Football" (the one with bigger guys, goalposts, and rampant
>steroid use), so you'd actually have to come up with a
>different mic application for each pun, and I can't think of
>any... so it's your turn - take a shot at it!
>
>Meanwhile, they could also design:
>The "Volleyball" - meant for trading solos live... it would
>have a built-in ducker with key inputs so when the other guy
>comes in, it drops your level automatically; and, of course,
>the "Squash Ball" with it's built-in hard limiter; the "Polo
>Ball", which would be specifically for toms - it would make
>them sound like they've been hit with a very large mallet; and
>finally, the "Tennis Ball" for that warm & fuzzy feeling. :)
>
>NeilYeh, it's appalling isn't it how Windows just grows.
My Paris boot only has XP, Paris, Wavelab, Nero and plugins and that's it.
I don't load anything else on it, so it *should* fit on a 4 gig partition,
but I'm thinking I should budget for 10-15 just to be sure. This time though
I'm going to go with the old ghosting thing so that I can restore partitions
at will to "brand new". Seems that's the only way to stop them just growing
madly like you say. Still, my Paris partition on my current box hasn't grown
in size, but geez it sure has slowed down a lot for no reason I can work
out.
Cheers,
Kim.
"Aaron Allen" <nospam@not_here.dude> wrote:
>
>"Kim" <hiddensounds@hotmail.com> wrote in message news:42ca159f$1@linux...
>>
>>
>> Just trying to make a plan here for this new machine. Currently I have
a
>> "Paris Only" boot of XP on my machine which is on a measely 4 Gig
>> partition.
>> I'm tempted to go 20Gig or so for my Paris only partition, but then, why?
&
|
|
|
|
| Re: MIDI Hell [message #55325 is a reply to message #55316] |
Tue, 05 July 2005 21:33 |
Colonel Panic
Messages: 11
Registered: July 2005
|
Junior Member |
|
|
to
>> recent
>> problems with RELIAfrekinBILITY (@#$%%@@@!!!)... I've switched to
>> Seagate:)
>> (By the way, check out www.storagereview.com for a good review of various
>> manufacturers HD's.) Anyhoo, in all my previous installs I've used the
>> Maxtor
>> installation program (Maxblast). The drives I got are not OEM (oops), so
>> I haven't got Seagate's version of Maxblast. I presume Windows can
>> format
>> the disc's just as well, but I'm not sure if this is true and if so, how
>> to go about it. I'm running Win 98SE. One of the drives will be my
>> OS/System
>> drive (though I will be using the extra space on it to store audio
>> files).
>> The other two are for audio files only.
>>
>> Gosh, I should know how to do this by now, but I've been
>> Maxblastorized --and
>> I don't want to mess up my precious bodily data(s) by screwing up an
>> unfamiliar
>> formatting protocol. Thanks.
>> MRHave you tried defragmenting the partition to see if it can help?
Cheers
erlilo
"Kim" <hiddensounds@hotmail.com> skrev i en meddelelse
news:42cb32d9$1@linux...
>
>
Still, my Paris partition on my current box hasn't grown
> in size, but geez it sure has slowed down a lot for no reason I can work
> out.
>
> Cheers,
> Kim.
>Thanks to each for their replies -- I was having one of those "which
way is up?" kind of days, so I appreciate y'all lending some clarity
to a man in need. Good suggestions in each of your posts; as it
happens, I do have SX3 here, so will look into "Time Warp" -- maybe
for individual trax, pre-mix, or for the whole thing, if we decide to
finish at this (somewhat sedate) tempo...
Again, gracias to all, much appreciated.
Chas
On Tue, 05 Jul 2005 13:36:27 -0700, Chas. Duncan
<duncan5199@SPAMLESSsbcglobal.net> wrote:
>Paris People:
>
>Working on a song demo here, several days in... The writer now wishes
>we were up 6 or 8 BPM... Don't want to start over...
>
>Thinking about timeshifting the thing in Wavelab... Question is --
>when? Should I finish rest of tracking ('nother guitar or two -- most
>of the lead vox, bg's, etc...) then drag the mix into WL and hit the
>"go faster" button? Or process existing tracks, bring'em back ino
>Paris and go from there? Whcih way is least screwed up?
>
>(starting to hate having this many choices...) -- Chas.in general.
On 6 Jul 2005 08:04:55 +1000, "Kim" <hiddensounds@hotmail.com> wrote:
>
>rick <parnell68@hotmail.com> wrote:
>>from all (what) that i've read 20g is the max with 10 - 12 ideal.
>
>Are you talking about Paris partitions specifically, or just about OS partitions
>in general?
>
>Cheers,
>Kim.Hmm. That one's come up a bit, as has the LOTR trilogy, Finding Nemo, and
star wars, Terminator 2, etc.
"Neil" <IOUOIU@OIU.com> wrote in message news:42ca9e31$1@linux...
>
>
> For effects realism, I'd go with the opening sequnce
> from "Saving Private Ryan".
>
> NeilSo what exactly is an overlay...I've never heard that term before
Don
"EK Sound" <spamnot.info@eksoundNO.com> wrote in message
news:42caf7bc$1@linux...<
|
|
|
|
Goto Forum:
Current Time: Wed Nov 27 08:47:53 PST 2024
Total time taken to generate the page: 0.03657 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
