Home » The PARIS Forums » PARIS: Classifieds » Everything Must Go?
| Everything Must Go? [message #53891] |
Tue, 14 November 2006 19:33  |
Robby Berman
Messages: 17
Registered: November 2006
|
Junior Member |
|
|
> and
> generate LTC and VITC time code, and supports both NTSC and PAL formats.
> The following frame rates are supported: 30, 29.97(non-drop), 29.97
> (drop),
> 25, and 24 fps, with the ability to auto detect the frame rate of incoming
> time code. The EDS-Sti-01 will support 48kHz and 44.lkHz sampling
> frequencies,
> as well as the ability to generate .1% pull-down and pull-up for
> film-to-video
> transfers. When reading time code, the EDS-Sti-01 is capable of
> freewheeling
> upon detection of missing time code, and has the ability to jam sync or
> regenerate
> fresh time code when dubbing. The EDS-Sti-01 supports both Black Burst
> mode
> (sample accurate) and Chase Mode type synchronization, and can generate an
> optional SMPTE time code display window in the video output signal
> ("window
> bum").
> The EDS-Sti-01 offers the user 11 front panel status indicator LEDs,
> including
> 30/29.97 (non-drop), 29.97 (drop), 25, and 24 frame rates, Lock, Video
> Present,
> LTC, VITC, Pull Down, Pull Up and Master Sync. Rear panel connectors
> include
> (2) quarter-inch TRS connectors for analog SMPTE time code input and
> output
> (LTC), and (3) BNC connectors for Video Input, House Sync and Video
> Output.
> Will ship to U.S. or Canada only, please. Contact robbyberman@mac.comSure.
I will say, however, that my experience with it had to do with my writing
the manual for it: it worked in my tests, as far as they needed to go to
document the card; I also consulted with Ensoniq's engineers on things I
couldn't test here.
I didn't use it in my own musical work after the manual was done, since I
had no need. It's possible you know more about the card than I do at this
point.
|
|
|
|
| Re: Everything Must Go? [message #53892 is a reply to message #53891] |
Wed, 15 November 2006 05:55  |
Don Nafe
Messages: 1206
Registered: July 2005
|
Senior Member |
|
|
/>
Anyone else want to chime in here?
"Don Nafe" <dnafe@magma.ca> wrote:
>Did you ever get the smpte card to work?1 eds - $175
1 mec- $125
1 c16 - $75
2 IF2's- $50 ea.
Everything is in pristine condition, only used to track a few demo's! Shipping
will be added upon sale. Paypal accepted.
thanks
JoeyHello everyone,
I still have some items left for sale:
1 Mec + EDS cable $100 (with original MEC box!!)
1 8 In card $250 OBO
Any one interested? Make me an offer. You can e-mail me at djinc@cox.net
Thanks!
David JohnYes...
It doesn't work in any "pro" way except in VITC mode.
--
Martin Harrington
www.lendanear-sound.com
"Robby Berman" <robbyberman@mac.com> wrote in message
news:455b268b$1@linux...
>
> Sure.
> I will say, however, that my experience with it had to do with my writing
> the manual for it: it worked in my tests, as far as they needed to go to
> document the card; I also consulted with Ensoniq's engineers on things I
> couldn't test here.
> I didn't use it in my own musical work after the manual was done, since I
> had no need. It's possible you know more about the card than I do at this
> point.
> Anyone else want to chime in here?
>
>
> "Don Nafe" <dnafe@magma.ca> wrote:
>>Did you ever get the smpte card to work?
>Ah, I didn't realize. I've found some positive posts about it here in the
group after doing a search, but maybe that's how the posters were using it.
Well, it's still available if someone can use it and wants to make an offer.
"Martin Harrington" <lendan@bigpond.net.au> wrote:
>Yes...
>It doesn't work in any "pro" way except in VITC mode.Well everything I've heard was that the card was a bust and never worked
properly...may I ask what id this VITC you're speaking of?
Don
"Robby Berman" <robbyberman
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Everything Must Go? [message #53913 is a reply to message #53904] |
Mon, 20 November 2006 22:47 |
Martin Harrington
Messages: 560
Registered: September 2005
|
Senior Member |
|
|
ruely
> brand new/never been used?
>
> also- your blue mec- is there ANY differences at all, between that and the
> black mec, besides the color? i know there are some real, and tangeable
> differences, between the black and the blue C16 controllers- but between
> the mecs???---
>
> much look forward to hearing back from you---
> will much appreciate it---
> most sincerely yours,
> harry epstein
>
>
> "Steve Kim" <chambiprood@hotmail.com> wrote:
>>
>>Still got a few pieces left: Blue mec-$75.00: Brand new Eds card- $225.00:
>>If2- $30.00. Or I'll let everything go for $300.00. Also included: all the
>>books software for 2.0 & 3.0. Email me guys! Steve,
>>Chambiprood@hotmail.com
>1 pair of C-16s (that's two C-16s) -- $75 plus shipping. These are blackface
units with Version 3 labels added. It's hard to believe that it wouldn't
be worth having a few spares around in a hard-working PARIS studio. Pots
need a little cleaning, but they're otherwise fine.
Will ship to US and Canada. Contact robbyberman@mac.com">>
>>>> *EVERYTHING is blackface*
>>>> 1- system 3 pack - $500.00 + shipping
>>>> 1- EDS 1000 w/crossover cables $225.00 + shipping
>>>> 1- adat card $225.00 + shipping
>>>> I guess I should say that everything works and is in mint
>>>> condition,smoke free studio. yadayada.
>>>> pay pal only please
>>>> If you are interested in anything email me at : alex.plasko@snet.net
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>Hi,
Do you have the eds card ?
Regards,
Dimitrios
"joey" <jo@jo.com> wrote:
>
>"harry epstein" <sarahgirl.harry@gmail.com> wrote:
|
|
|
|
Goto Forum:
Current Time: Sun Dec 01 18:09:17 PST 2024
Total time taken to generate the page: 0.01632 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
