Home » The PARIS Forums » PARIS: Main » Am I lonely in Paris solving problem search here ??
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84821 is a reply to message #84818] |
Sat, 19 May 2007 12:32   |
|
|
Dimitrios,
I think a part of the problem is that a lot of the folks who still hang here
no longer use Paris on a regular basis. I still do, but I'm a Mac guy, so
your XP experiments aren't relevent for me. And frankly, I'm seriously looking
around to see what my next DAW is going to be.
Gantt
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>I am surprised that my last attempts to solve the more adat cards under
XP
>thing did not quite interested anyone !!
>I thought that this was a great finding and would lead with some help from
>my friends to solve the adat mystery under XP !
>Most of you say you cannot have more than one adat catd per mec, DJ achieved
>the most two adat cards only on one mec on his eds multicard and mec system.
>Now I managed to have two adat cards on two of the three mecs.
>OK if all these are boring then I might loose my interest too and to rphrase
>I might loose my interest in posting and trying to share experience and
keep
>whatever I do to myself.
>Do I sound pissed off ?
>Not quite but I am asking again is anyone interested ?
>Regards,
>Dimitrios
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84822 is a reply to message #84819] |
Sat, 19 May 2007 12:39 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_008C_01C79A2B.EF5F2610
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi Dimitrios,
I am hot on this one. At this time I only have two MECs and the
need for two ADATs. I was unable to get two ADATs working in MEC A
with none in MEC E and vise versa. I don't need a third ADAT card at =
this
time though it might be advantageous to have these two in one MEC D.
Do you think that will be possible if the new 442 is attached on card 5 =
as 442 E?
I'll give that a try. =20
I am interested in all things Paris. That's all I do these days beside =
gig.
Finishing up a jazz album today and another rock album this week =
hopefully. =20
I'll be ready to Dimtriosize my system some more after that.
The new Mackie Mixer Mixer is in and running by your design. That's a =
great
one! My plan will implement fours submixes with two mono and one stereo =
send
across them all with that simple install. Snakes weren't fun to solder =
but that's
over. I am waiting for five Mogami clock cables later this week also.
Lots of fun and all Paris!
Tom
PS I got a Creamware card because of your recommendation also. =20
This is getting scary!
"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:464f4bdc$1@linux...
OK,
and I someone replies with yes I ma interested I would like some =
tryouts
from you too to sahre if this can be achieved onn your systems to =
finally
find out what is causing this adat mystery under XP.
I say again that I believe that only the last mec in chain needs tio =
have
only one adat card and all other mecs can have at least two !.
If I had more adat cards I could try to load them all so you who might =
have
more adat cards could try that...
Regards,
Dimitrios
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>I am surprised that my last attempts to solve the more adat cards =
under
XP
>thing did not quite interested anyone !!
>I thought that this was a great finding and would lead with some help =
from
>my friends to solve the adat mystery under XP !
>Most of you say you cannot have more than one adat catd per mec, DJ =
achieved
>the most two adat cards only on one mec on his eds multicard and mec =
system.
>Now I managed to have two adat cards on two of the three mecs.
>OK if all these are boring then I might loose my interest too and to =
rphrase
>I might loose my interest in posting and trying to share experience =
and
keep
>whatever I do to myself.
>Do I sound pissed off ?
>Not quite but I am asking again is anyone interested ?
>Regards,
>Dimitrios
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_008C_01C79A2B.EF5F2610
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi Dimitrios,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am hot on this one. At this =
time I only=20
have two MECs and the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>need for two ADATs. I was unable =
to get two=20
ADATs working in MEC A</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>with none in MEC E and vise versa. I =
don't need a=20
third ADAT card at this</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>time though it might be advantageous to =
have these=20
two in one MEC D.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Do you think that will be possible if =
the new 442=20
is attached on card 5 as 442 E?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'll give that a try. =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I am interested in all things =
Paris. That's=20
all I do these days beside gig.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Finishing up a jazz album today and =
another rock=20
album this week hopefully. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'll be </FONT><FONT face=3DArial =
size=3D2>ready to=20
Dimtriosize my system some more after that.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The new Mackie Mixer Mixer is in and =
running by=20
your design. That's a great</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>one! My plan will implement =
fours=20
submixes with two mono and one stereo send</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>across them all with that simple =
install. =20
Snakes weren't fun to solder but that's</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>over. I am waiting for five =
Mogami clock=20
cables later this week also.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Lots of fun and all Paris!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>PS I got a Creamware card because of =
your=20
recommendation also. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2> This is =
getting=20
scary!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV> </DIV>
<DIV>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message <A=20
href=3D"news:464f4bdc$1@linux">news:464f4bdc$1@linux</A>...</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"><BR>OK,<BR>and=20
I someone replies with yes I ma interested I would like some =
tryouts<BR>from=20
you too to sahre if this can be achieved onn your systems to =
finally<BR>find=20
out what is causing this adat mystery under XP.<BR>I say again that I =
believe=20
that only the last mec in chain needs tio have<BR>only one adat card =
and all=20
other mecs can have at least two !.<BR>If I had more adat cards I =
could try to=20
load them all so you who might have<BR>more adat cards could try=20
that...<BR>Regards,<BR>Dimitrios<BR><BR>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>>=20
wrote:<BR>><BR>>Hi,<BR>>I am surprised that my last attempts =
to solve=20
the more adat cards under<BR>XP<BR>>thing did not quite interested =
anyone=20
!!<BR>>I thought that this was a great finding and would lead with =
some=20
help from<BR>>my friends to solve the adat mystery under XP =
!<BR>>Most=20
of you say you cannot have more than one adat catd per mec, DJ=20
achieved<BR>>the most two adat cards only on one mec on his eds =
multicard=20
and mec system.<BR>>Now I managed to have two adat cards on two of =
the=20
three mecs.<BR>>OK if all these are boring then I might loose my =
interest=20
too and to rphrase<BR>>I might loose my interest in posting and =
trying to=20
share experience and<BR>keep<BR>>whatever I do to myself.<BR>>Do =
I sound=20
pissed off ?<BR>>Not quite but I am asking again is anyone =
interested=20
?<BR>>Regards,<BR>>Dimitrios<BR></BLOCKQUOTE >
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_008C_01C79A2B.EF5F2610--
|
|
|
|
|
|
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84831 is a reply to message #84829] |
Sat, 19 May 2007 18:44 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_000A_01C79A5E.DB9F4500
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Group hug.
T
"James McCloskey" <excelsm@hotmail.com> wrote in message =
news:464f94d8$1@linux...
Hey Dimitrios! I salute you for all your hard work! I always read =
your
posts, and there are many who lurk here that don't post. You are =
helping
more people than you know. I still use Paris but I'm on a Mac and I =
don't
get a chance to use it as much as I would like as well. For a long =
time
I have considered switching to XP for it's obvious advantages. My =
Macs just
work, and I dread the PC problems I've seen here for years. I prefer =
to
avoid the headaches, however, some day I may still give it a try, and =
all
your work and help will be absolutely needed.=20
Thanks again for your contribution!
James
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>I am surprised that my last attempts to solve the more adat cards =
under
XP
>thing did not quite interested anyone !!
>I thought that this was a great finding and would lead with some help =
from
>my friends to solve the adat mystery under XP !
>Most of you say you cannot have more than one adat catd per mec, DJ =
achieved
>the most two adat cards only on one mec on his eds multicard and mec =
system.
>Now I managed to have two adat cards on two of the three mecs.
>OK if all these are boring then I might loose my interest too and to =
rphrase
>I might loose my interest in posting and trying to share experience =
and
keep
>whatever I do to myself.
>Do I sound pissed off ?
>Not quite but I am asking again is anyone interested ?
>Regards,
>Dimitrios
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_000A_01C79A5E.DB9F4500
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Group hug.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>T</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"James McCloskey" <<A=20
href=3D"mailto:excelsm@hotmail.com">excelsm@hotmail.com</A>> wrote =
in message=20
<A =
href=3D"news:464f94d8$1@linux">news:464f94d8$1@linux</A>...</DIV><BR>Hey =
Dimitrios! I salute you for all your hard =
work! I=20
always read your<BR>posts, and there are many who lurk here that don't =
post. You are helping<BR>more people than you know. I =
still use=20
Paris but I'm on a Mac and I don't<BR>get a chance to use it as much =
as I=20
would like as well. For a long time<BR>I have considered =
switching to XP=20
for it's obvious advantages. My Macs just<BR>work, and I dread =
the PC=20
problems I've seen here for years. I prefer to<BR>avoid the =
headaches,=20
however, some day I may still give it a try, and all<BR>your work and =
help=20
will be absolutely needed. <BR><BR>Thanks again for your=20
contribution!<BR><BR>James<BR><BR><BR>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>>=20
wrote:<BR>><BR>>Hi,<BR>>I am surprised that my last attempts =
to solve=20
the more adat cards under<BR>XP<BR>>thing did not quite interested =
anyone=20
!!<BR>>I thought that this was a great finding and would lead with =
some=20
help from<BR>>my friends to solve the adat mystery under XP =
!<BR>>Most=20
of you say you cannot have more than one adat catd per mec, DJ=20
achieved<BR>>the most two adat cards only on one mec on his eds =
multicard=20
and mec system.<BR>>Now I managed to have two adat cards on two of =
the=20
three mecs.<BR>>OK if all these are boring then I might loose my =
interest=20
too and to rphrase<BR>>I might loose my interest in posting and =
trying to=20
share experience and<BR>keep<BR>>whatever I do to myself.<BR>>Do =
I sound=20
pissed off ?<BR>>Not quite but I am asking again is anyone =
interested=20
?<BR>>Regards,<BR>>Dimitrios<BR></BLOCKQUOTE >
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_000A_01C79A5E.DB9F4500--
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84875 is a reply to message #84818] |
Sun, 20 May 2007 19:58 |
DMorrell
Messages: 15
Registered: June 2005
|
Junior Member |
|
|
Hi Dimitrios,
I enjoy following your activity. You and Deej have been the resident
mad scientists of PARIS for a long time and your efforts have been
read and appreciated by me. And now... with Deej out there in
whateversville, you're it.
I run a couple of dual MEC PARIS rigs on 98SE, they're solid and I
don't bother with mods. I also run a couple of native Samplitude
rigs.. Your posts have led me to consider combining one of each into
a hybrid... perhaps. Probably not, though, as I both of my systems
already sound great.
Your hot rodding activity is amazing to me.
Peace - Don.
On 20 May 2007 05:07:57 +1000, "Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>I am surprised that my last attempts to solve the more adat cards under XP
>thing did not quite interested anyone !!
>I thought that this was a great finding and would lead with some help from
>my friends to solve the adat mystery under XP !
>Most of you say you cannot have more than one adat catd per mec, DJ achieved
>the most two adat cards only on one mec on his eds multicard and mec system.
>Now I managed to have two adat cards on two of the three mecs.
>OK if all these are boring then I might loose my interest too and to rphrase
>I might loose my interest in posting and trying to share experience and keep
>whatever I do to myself.
>Do I sound pissed off ?
>Not quite but I am asking again is anyone interested ?
>Regards,
>Dimitrios
|
|
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84879 is a reply to message #84818] |
Sun, 20 May 2007 22:55 |
BT
Messages: 19
Registered: February 2007
|
Junior Member |
|
|
Howdy Ya'll........... from Texas.
Well, well, it appears that Brian T is still alive and still uses Paris
on a regular basis, despite what you may have heard to the contrary. I
still drop in here now and again in lurker mode to see what's up, and
this is still the coolest collection of people on any newsgroup I've
ever seen.
Dimitrios has taken up the torch in the true spirit of bleeding edge
just-because-we-can-ism. I love it.
I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT cards.
2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I never
have a problem, other than it takes a while to boot Paris because of the
way the Paris app parses the hardware attached to the EDS1000s so
slowly. That's something Chris T tried to improve when we were fine
tuning the XP drivers at my studio, but when we sped it up on the XP
drivers, Paris would lock up while booting. Still don't know why.
The only consistent thing I can think of is that in all cases, my ADAT
cards are farthest from the MEC power supply. Other than that, it's just
turn it on and go.
I've been told that electrons seem to like me especially well, for some
reason or other. I suppose this could also be a factor. Say, you guys DO
talk nice to your gear, don't you?
Regards,
Brian T
Dimitrios wrote:
> Hi,
> I am surprised that my last attempts to solve the more adat cards under XP
> thing did not quite interested anyone !!
> I thought that this was a great finding and would lead with some help from
> my friends to solve the adat mystery under XP !
> Most of you say you cannot have more than one adat catd per mec, DJ achieved
> the most two adat cards only on one mec on his eds multicard and mec system.
> Now I managed to have two adat cards on two of the three mecs.
> OK if all these are boring then I might loose my interest too and to rphrase
> I might loose my interest in posting and trying to share experience and keep
> whatever I do to myself.
> Do I sound pissed off ?
> Not quite but I am asking again is anyone interested ?
> Regards,
> Dimitrios
Regards,
Brian T
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84880 is a reply to message #84879] |
Sun, 20 May 2007 23:27 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_009F_01C79B4F.9FE030A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
You're killing me.
T.
"BT" <gbtank@comcast.net> wrote in message news:465135cf$1@linux...
Howdy Ya'll........... from Texas.
Well, well, it appears that Brian T is still alive and still uses =
Paris=20
on a regular basis, despite what you may have heard to the contrary. I =
still drop in here now and again in lurker mode to see what's up, and=20
this is still the coolest collection of people on any newsgroup I've=20
ever seen.
Dimitrios has taken up the torch in the true spirit of bleeding edge=20
just-because-we-can-ism. I love it.
I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT =
cards.=20
2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I =
never=20
have a problem, other than it takes a while to boot Paris because of =
the=20
way the Paris app parses the hardware attached to the EDS1000s so=20
slowly. That's something Chris T tried to improve when we were fine=20
tuning the XP drivers at my studio, but when we sped it up on the XP=20
drivers, Paris would lock up while booting. Still don't know why.
The only consistent thing I can think of is that in all cases, my ADAT =
cards are farthest from the MEC power supply. Other than that, it's =
just=20
turn it on and go.
I've been told that electrons seem to like me especially well, for =
some=20
reason or other. I suppose this could also be a factor. Say, you guys =
DO=20
talk nice to your gear, don't you?
Regards,
Brian T
Dimitrios wrote:
> Hi,
> I am surprised that my last attempts to solve the more adat cards =
under XP
> thing did not quite interested anyone !!
> I thought that this was a great finding and would lead with some =
help from
> my friends to solve the adat mystery under XP !
> Most of you say you cannot have more than one adat catd per mec, DJ =
achieved
> the most two adat cards only on one mec on his eds multicard and mec =
system.
> Now I managed to have two adat cards on two of the three mecs.
> OK if all these are boring then I might loose my interest too and to =
rphrase
> I might loose my interest in posting and trying to share experience =
and keep
> whatever I do to myself.
> Do I sound pissed off ?
> Not quite but I am asking again is anyone interested ?
> Regards,
> Dimitrios
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_009F_01C79B4F.9FE030A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>You're killing me.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"BT" <<A =
href=3D"mailto:gbtank@comcast.net">gbtank@comcast.net</A>>=20
wrote in message <A=20
href=3D"news:465135cf$1@linux">news:465135cf$1@linux</A>...</DIV>Howdy =
Ya'll........... from Texas.<BR><BR>Well, well, it appears that Brian =
T is=20
still alive and still uses Paris <BR>on a regular basis, despite what =
you may=20
have heard to the contrary. I <BR>still drop in here now and again in =
lurker=20
mode to see what's up, and <BR>this is still the coolest collection of =
people=20
on any newsgroup I've <BR>ever seen.<BR><BR>Dimitrios has taken up the =
torch=20
in the true spirit of bleeding edge <BR>just-because-we-can-ism. I =
love=20
it.<BR><BR>I currently have 8 EDS cards and 5 MECs running a total of =
9 ADAT=20
cards. <BR>2x ADAT on MECs B, C, D and E and a single ADAT on the "A" =
MEC. I=20
never <BR>have a problem, other than it takes a while to boot Paris =
because of=20
the <BR>way the Paris app parses the hardware attached to the EDS1000s =
so=20
<BR>slowly. That's something Chris T tried to improve when we were =
fine=20
<BR>tuning the XP drivers at my studio, but when we sped it up on the =
XP=20
<BR>drivers, Paris would lock up while booting. Still don't know=20
why.<BR><BR>The only consistent thing I can think of is that in all =
cases, my=20
ADAT <BR>cards are farthest from the MEC power supply. Other than =
that, it's=20
just <BR> turn it on and go.<BR><BR>I've been told that =
electrons seem=20
to like me especially well, for some <BR>reason or other. I suppose =
this could=20
also be a factor. Say, you guys DO <BR>talk nice to your gear, don't=20
you?<BR><BR>Regards,<BR>Brian T<BR><BR>Dimitrios wrote:<BR>> =
Hi,<BR>> I=20
am surprised that my last attempts to solve the more adat cards under=20
XP<BR>> thing did not quite interested anyone !!<BR>> I thought =
that=20
this was a great finding and would lead with some help from<BR>> my =
friends=20
to solve the adat mystery under XP !<BR>> Most of you say you =
cannot have=20
more than one adat catd per mec, DJ achieved<BR>> the most two adat =
cards=20
only on one mec on his eds multicard and mec system.<BR>> Now I =
managed to=20
have two adat cards on two of the three mecs.<BR>> OK if all these =
are=20
boring then I might loose my interest too and to rphrase<BR>> I =
might loose=20
my interest in posting and trying to share experience and keep<BR>> =
whatever I do to myself.<BR>> Do I sound pissed off ?<BR>> Not =
quite but=20
I am asking again is anyone interested ?<BR>> Regards,<BR>>=20
Dimitrios</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_009F_01C79B4F.9FE030A0--
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84881 is a reply to message #84879] |
Sun, 20 May 2007 23:39 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Hi Brian,
Glad to see you are alive and kickin' using Paris in every day basis !!
I will be gathering all my own and other findings in a nice post to do
our regular homework with Paris just before summer comes :)
I am not a pusher in any way but have you had the time to listen to my
song Morgan has sent you ("When you call my name" )?
I would love a quick reply even if it is nothing special to you.
With regards,
Dimitrios
BT <gbtank@comcast.net> wrote:
>Howdy Ya'll........... from Texas.
>
>Well, well, it appears that Brian T is still alive and still uses Paris
>on a regular basis, despite what you may have heard to the contrary. I
>still drop in here now and again in lurker mode to see what's up, and
>this is still the coolest collection of people on any newsgroup I've
>ever seen.
>
>Dimitrios has taken up the torch in the true spirit of bleeding edge
>just-because-we-can-ism. I love it.
>
>I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT cards.
>2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I never
>have a problem, other than it takes a while to boot Paris because of the
>way the Paris app parses the hardware attached to the EDS1000s so
>slowly. That's something Chris T tried to improve when we were fine
>tuning the XP drivers at my studio, but when we sped it up on the XP
>drivers, Paris would lock up while booting. Still don't know why.
>
>The only consistent thing I can think of is that in all cases, my ADAT
>cards are farthest from the MEC power supply. Other than that, it's just
> turn it on and go.
>
>I've been told that electrons seem to like me especially well, for some
>reason or other. I suppose this could also be a factor. Say, you guys DO
>talk nice to your gear, don't you?
>
>Regards,
>Brian T
>
>Dimitrios wrote:
>> Hi,
>> I am surprised that my last attempts to solve the more adat cards under
XP
>> thing did not quite interested anyone !!
>> I thought that this was a great finding and would lead with some help
from
>> my friends to solve the adat mystery under XP !
>> Most of you say you cannot have more than one adat catd per mec, DJ achieved
>> the most two adat cards only on one mec on his eds multicard and mec system.
>> Now I managed to have two adat cards on two of the three mecs.
>> OK if all these are boring then I might loose my interest too and to rphrase
>> I might loose my interest in posting and trying to share experience and
keep
>> whatever I do to myself.
>> Do I sound pissed off ?
>> Not quite but I am asking again is anyone interested ?
>> Regards,
>> Dimitrios
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84882 is a reply to message #84879] |
Mon, 21 May 2007 01:56 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
and you probably still don't need an umbrella when it rains. ;o)
On Mon, 21 May 2007 00:55:17 -0500, BT <gbtank@comcast.net> wrote:
>Howdy Ya'll........... from Texas.
>
>Well, well, it appears that Brian T is still alive and still uses Paris
>on a regular basis, despite what you may have heard to the contrary. I
>still drop in here now and again in lurker mode to see what's up, and
>this is still the coolest collection of people on any newsgroup I've
>ever seen.
>
>Dimitrios has taken up the torch in the true spirit of bleeding edge
>just-because-we-can-ism. I love it.
>
>I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT cards.
>2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I never
>have a problem, other than it takes a while to boot Paris because of the
>way the Paris app parses the hardware attached to the EDS1000s so
>slowly. That's something Chris T tried to improve when we were fine
>tuning the XP drivers at my studio, but when we sped it up on the XP
>drivers, Paris would lock up while booting. Still don't know why.
>
>The only consistent thing I can think of is that in all cases, my ADAT
>cards are farthest from the MEC power supply. Other than that, it's just
> turn it on and go.
>
>I've been told that electrons seem to like me especially well, for some
>reason or other. I suppose this could also be a factor. Say, you guys DO
>talk nice to your gear, don't you?
>
>Regards,
>Brian T
>
>Dimitrios wrote:
>> Hi,
>> I am surprised that my last attempts to solve the more adat cards under XP
>> thing did not quite interested anyone !!
>> I thought that this was a great finding and would lead with some help from
>> my friends to solve the adat mystery under XP !
>> Most of you say you cannot have more than one adat catd per mec, DJ achieved
>> the most two adat cards only on one mec on his eds multicard and mec system.
>> Now I managed to have two adat cards on two of the three mecs.
>> OK if all these are boring then I might loose my interest too and to rphrase
>> I might loose my interest in posting and trying to share experience and keep
>> whatever I do to myself.
>> Do I sound pissed off ?
>> Not quite but I am asking again is anyone interested ?
>> Regards,
>> Dimitrios
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84893 is a reply to message #84879] |
Mon, 21 May 2007 06:52 |
|
|
BT <gbtank@comcast.net> wrote:
>Howdy Ya'll........... from Texas.
>
>Well, well, it appears that Brian T is still alive and still uses Paris
>on a regular basis, despite what you may have heard to the contrary. I
>still drop in here now and again in lurker mode to see what's up, and
>this is still the coolest collection of people on any newsgroup I've
>ever seen.
>
>Dimitrios has taken up the torch in the true spirit of bleeding edge
>just-because-we-can-ism. I love it.
>
>I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT cards.
>2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I never
>have a problem, other than it takes a while to boot Paris because of the
>way the Paris app parses the hardware attached to the EDS1000s so
>slowly. That's something Chris T tried to improve when we were fine
>tuning the XP drivers at my studio, but when we sped it up on the XP
>drivers, Paris would lock up while booting. Still don't know why.
>
>The only consistent thing I can think of is that in all cases, my ADAT
>cards are farthest from the MEC power supply. Other than that, it's just
> turn it on and go.
>
>I've been told that electrons seem to like me especially well, for some
>reason or other. I suppose this could also be a factor. Say, you guys DO
>talk nice to your gear, don't you?
>
>Regards,
>Brian T
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84895 is a reply to message #84879] |
Mon, 21 May 2007 06:53 |
|
|
Hey Brian,
Good to see you're alive and well and that Paris stills figures into your
setup! Are you still running Nuendo? What DA converters are you using?
Thanks!
Gantt
BT <gbtank@comcast.net> wrote:
>Howdy Ya'll........... from Texas.
>
>Well, well, it appears that Brian T is still alive and still uses Paris
>on a regular basis, despite what you may have heard to the contrary. I
>still drop in here now and again in lurker mode to see what's up, and
>this is still the coolest collection of people on any newsgroup I've
>ever seen.
>
>Dimitrios has taken up the torch in the true spirit of bleeding edge
>just-because-we-can-ism. I love it.
>
>I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT cards.
>2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I never
>have a problem, other than it takes a while to boot Paris because of the
>way the Paris app parses the hardware attached to the EDS1000s so
>slowly. That's something Chris T tried to improve when we were fine
>tuning the XP drivers at my studio, but when we sped it up on the XP
>drivers, Paris would lock up while booting. Still don't know why.
>
>The only consistent thing I can think of is that in all cases, my ADAT
>cards are farthest from the MEC power supply. Other than that, it's just
> turn it on and go.
>
>I've been told that electrons seem to like me especially well, for some
>reason or other. I suppose this could also be a factor. Say, you guys DO
>talk nice to your gear, don't you?
>
>Regards,
>Brian T
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: Am I lonely in Paris solving problem search here ?? [message #84899 is a reply to message #84879] |
Mon, 21 May 2007 07:26 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Dear Brian,
Thanks for sharing your setup "secrets"
Are your adat cards sitting on slots 8 and 9 ?.
These are the farmost from power supply.
Also on these B,C,D,E mecs are any input output cards sitting and if so what
slots ?
Finally on mec A where on adat card is sitting was this intended to do so
or this mec refused to accept more than one Adat card ?
Any ins and outs on this Mec "A" too , slots ?
I know these are many questions but believe me they might help a lot !
Thanks for sharing.
regards,
Dimitrios
BT <gbtank@comcast.net> wrote:
>Howdy Ya'll........... from Texas.
>
>Well, well, it appears that Brian T is still alive and still uses Paris
>on a regular basis, despite what you may have heard to the contrary. I
>still drop in here now and again in lurker mode to see what's up, and
>this is still the coolest collection of people on any newsgroup I've
>ever seen.
>
>Dimitrios has taken up the torch in the true spirit of bleeding edge
>just-because-we-can-ism. I love it.
>
>I currently have 8 EDS cards and 5 MECs running a total of 9 ADAT cards.
>2x ADAT on MECs B, C, D and E and a single ADAT on the "A" MEC. I never
>have a problem, other than it takes a while to boot Paris because of the
>way the Paris app parses the hardware attached to the EDS1000s so
>slowly. That's something Chris T tried to improve when we were fine
>tuning the XP drivers at my studio, but when we sped it up on the XP
>drivers, Paris would lock up while booting. Still don't know why.
>
>The only consistent thing I can think of is that in all cases, my ADAT
>cards are farthest from the MEC power supply. Other than that, it's just
> turn it on and go.
>
>I've been told that electrons seem to like me especially well, for some
>reason or other. I suppose this could also be a factor. Say, you guys DO
>talk nice to your gear, don't you?
>
>Regards,
>Brian T
>
>Dimitrios wrote:
>> Hi,
>> I am surprised that my last attempts to solve the more adat cards under
XP
>> thing did not quite interested anyone !!
>> I thought that this was a great finding and would lead with some help
from
>> my friends to solve the adat mystery under XP !
>> Most of you say you cannot have more than one adat catd per mec, DJ achieved
>> the most two adat cards only on one mec on his eds multicard and mec system.
>> Now I managed to have two adat cards on two of the three mecs.
>> OK if all these are boring then I might loose my interest too and to rphrase
>> I might loose my interest in posting and trying to share experience and
keep
>> whatever I do to myself.
>> Do I sound pissed off ?
>> Not quite but I am asking again is anyone interested ?
>> Regards,
>> Dimitrios
|
|
|
|
Goto Forum:
Current Time: Mon Nov 11 14:11:47 PST 2024
Total time taken to generate the page: 0.01492 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
