The PARIS Forums: PARIS: Main » EDS500 card for tracking only?

Home » The PARIS Forums » PARIS: Main » EDS500 card for tracking only?

Show: Today's Messages :: Polls :: Message Navigator

EDS500 card for tracking only? [message #93635]

Fri, 14 December 2007 09:49

Paul Braun
Messages: 391
Registered: September 2005

Senior Member

I have a chance at picking up an EDS500 card.

Since my mobile rig is only used for tracking, and all mixing is done at
home, would I be OK replacing one of my two EDS1000 cards with the 500, thereby
releasing one of the 1000's for the home mixing rig?

My thinking is that the tracking rig won't use any efx anyway.

Thanks.

pab

Report message to a moderator

Re: EDS500 card for tracking only? [message #93637 is a reply to message #93635]

Fri, 14 December 2007 08:52

EK Sound

Messages: 939
Registered: June 2005

Senior Member

The EDS500 card can ONLY be used stand alone. The ribbon cable
interconnects are on the daughter card (missing on the '500).

David.

Paul Braun wrote:

> I have a chance at picking up an EDS500 card.
>
> Since my mobile rig is only used for tracking, and all mixing is done at
> home, would I be OK replacing one of my two EDS1000 cards with the 500, thereby
> releasing one of the 1000's for the home mixing rig?
>
> My thinking is that the tracking rig won't use any efx anyway.
>
> Thanks.
>
> pab

Report message to a moderator

Re: EDS500 card for tracking only? [message #93639 is a reply to message #93637]

Fri, 14 December 2007 09:59

Paul Braun
Messages: 391
Registered: September 2005

Senior Member

EK Sound <ask_me@nospam.net> wrote:
>The EDS500 card can ONLY be used stand alone. The ribbon cable
>interconnects are on the daughter card (missing on the '500).
>
>David.
>

Well, crap. I knew it sounded too good to be true. I guess I wasn't paying
that close of attention when I hooked my cards together.

Unless someone has a daughtercard lying around they don't need anymore....

pab

Report message to a moderator

Re: EDS500 card for tracking only? [message #93640 is a reply to message #93639]

Fri, 14 December 2007 09:14

EK Sound

Messages: 939
Registered: June 2005

Senior Member

You can check with TheSonic...

http://www.thesoniq.com/

David.

Paul Braun wrote:

> EK Sound <ask_me@nospam.net> wrote:
>
>>The EDS500 card can ONLY be used stand alone. The ribbon cable
>>interconnects are on the daughter card (missing on the '500).
>>
>>David.
>>
>
>
> Well, crap. I knew it sounded too good to be true. I guess I wasn't paying
> that close of attention when I hooked my cards together.
>
> Unless someone has a daughtercard lying around they don't need anymore....
>
> pab

Report message to a moderator

Previous Topic:	Sound Card for native
Next Topic:	UAD 4.9 SPL Transient Designer

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Mar 10 12:00:28 PDT 2025

Total time taken to generate the page: 0.00822 seconds