Home » The PARIS Forums » PARIS: Main » OT: the only 'vintage' thing in my studio other than me
| OT: the only 'vintage' thing in my studio other than me [message #93815] |
Fri, 21 December 2007 13:25  |
TCB
Messages: 1261
Registered: July 2007
|
Senior Member |
|
|
So, a few months back an acquaintance owed me some money. Not a lot, a few
hundred dollars for doing a bunch of computer editing for a hip hop project.
He's a good guy, struggling to get a couple of local CT artists known. Yes,
people in the hip hop world struggle, a lot some of the time. Anyway, the
project was for a very good, edgy, female rapper and I think it came out
quite nicely. Then, my acquaintance had some personal money problems and
I was about to write the thing off as a complete loss. Not a huge deal, my
day job is so off the charts busy I only take work I enjoy doing anyway.
So I politely ask him about the money a two or three times and he's genuinely
upset he can't pay me. I don't hear anything for a while and then one day
he calls to say that he has two Technics 1200s that he'd be willing to give
me instead of cash. As an enthusiastic but not especially skilled DJ it's
kind of overkill for me, but what the hell, I take them. They're obviously
in need of some work, but they come with flight cases and have a certain
amount of cool to me because they've obviously been doing battle in the hip
hop trenches forever. My guy was a professional DJ for a long, long time
and the cases are covered with stickers from Public Enemy, Noriega, Tupac,
and probably a dozen others. They've been sitting in my studio, used only
occasionally, for a while but as I'm probably taking over a night at a club
again I thought I should get them some TLC
So I took them to the best turntable guy I could find in CT. He's a slightly
eccentric fellow but clearly knows what he's doing. There's fancy high end
tube amps for audiophiles on the shelves, next to Parasound amps and all
that kind of stuff. So I lug in my battered up flight cases and leave them
with him. Last night, they were done so I drove up to get them and hear the
diagnosis. I walk in and he says, 'Hey, it's the duct tape guy.' To which
I reply that no, I did not put duct tape in the inside of my 12s. He goes
on to describe the shape they tables were in. First, he said that when he
pulled the platters off there a thick coating of gunk, probably a combination
of spilled beer, cigarette tar, and who knows what. So much of it that he
was initially worried it might have ruined the motors in the decks. Luckily,
that hadn't happened. The bearings were 'bone dry' and the previously mentioned
duct tape had been used in various places. One headshell was wired incorrectly
and the leads were almost rotted out. All that was fixed and we fired them
up and they sound great.
But here's the funny part. I thought they were a pair, but my repair guy
flipped one of them over to show me the serial number. It was made in 1979!
That's only the second year Technics made the mkII, and it's freaking almost
30 years old. Then my repair guys said, 'These things are built like a safe.
I'm sure this one has another 30 left in it.' Now I just have to learn to
DJ as well as a guy who owns these should be able to.
|
|
|
|
| Re: the only 'vintage' thing in my studio other than me [message #93841 is a reply to message #93815] |
Fri, 21 December 2007 22:39  |
Deej
Messages: 130
Registered: September 2006
|
Senior Member |
|
|
Very cool thad. Sounds like you scored. Jus the vibe alone could be
inspirational......30 year old turntables? ....that still work????. that's a
pretty amazing survival story in itself.
I've got an Ampeg B15N here that looked and smelled sorta' like what I think
you're describing. It was the rankest, foulest POS when it arrived that I
could possibly imagine. It smelled like it had lived it's life in a St Louis
Blues Bar. You could smell the cigarette smoke throughout the whole house.
It took me about a month to clean it up to the point that it didn't stink up
the house.
;o)
;o)
"TCB" <nobody@ishere.com> wrote in message news:476c2144$1@linux...
>
> So, a few months back an acquaintance owed me some money. Not a lot, a few
> hundred dollars for doing a bunch of computer editing for a hip hop
> project.
> He's a good guy, struggling to get a couple of local CT artists known.
> Yes,
> people in the hip hop world struggle, a lot some of the time. Anyway, the
> project was for a very good, edgy, female rapper and I think it came out
> quite nicely. Then, my acquaintance had some personal money problems and
> I was about to write the thing off as a complete loss. Not a huge deal, my
> day job is so off the charts busy I only take work I enjoy doing anyway.
>
>
> So I politely ask him about the money a two or three times and he's
> genuinely
> upset he can't pay me. I don't hear anything for a while and then one day
> he calls to say that he has two Technics 1200s that he'd be willing to
> give
> me instead of cash. As an enthusiastic but not especially skilled DJ it's
> kind of overkill for me, but what the hell, I take them. They're obviously
> in need of some work, but they come with flight cases and have a certain
> amount of cool to me because they've obviously been doing battle in the
> hip
> hop trenches forever. My guy was a professional DJ for a long, long time
> and the cases are covered with stickers from Public Enemy, Noriega, Tupac,
> and probably a dozen others. They've been sitting in my studio, used only
> occasionally, for a while but as I'm probably taking over a night at a
> club
> again I thought I should get them some TLC
>
> So I took them to the best turntable guy I could find in CT. He's a
> slightly
> eccentric fellow but clearly knows what he's doing. There's fancy high end
> tube amps for audiophiles on the shelves, next to Parasound amps and all
> that kind of stuff. So I lug in my battered up flight cases and leave them
> with him. Last night, they were done so I drove up to get them and hear
> the
> diagnosis. I walk in and he says, 'Hey, it's the duct tape guy.' To which
> I reply that no, I did not put duct tape in the inside of my 12s. He goes
> on to describe the shape they tables were in. First, he said that when he
> pulled the platters off there a thick coating of gunk, probably a
> combination
> of spilled beer, cigarette tar, and who knows what. So much of it that he
> was initially worried it might have ruined the motors in the decks.
> Luckily,
> that hadn't happened. The bearings were 'bone dry' and the previously
> mentioned
> duct tape had been used in various places. One headshell was wired
> incorrectly
> and the leads were almost rotted out. All that was fixed and we fired them
> up and they sound great.
>
> But here's the funny part. I thought they were a pair, but my repair guy
> flipped one of them over to show me the serial number. It was made in
> 1979!
> That's only the second year Technics made the mkII, and it's freaking
> almost
> 30 years old. Then my repair guys said, 'These things are built like a
> safe.
> I'm sure this one has another 30 left in it.' Now I just have to learn to
> DJ as well as a guy who owns these should be able to.
>
|
|
|
|
| Re: the only 'vintage' thing in my studio other than me [message #93863 is a reply to message #93841] |
Sat, 22 December 2007 08:35 |
TCB
Messages: 1261
Registered: July 2007
|
Senior Member |
|
|
Yup, I think I did score. I've been messing around with Traktor Scratch since
I got them back and it's a really cool rig. Now I have to practice a lot,
but it should be fun practice. I've been pawing through my vinyl collection,
which has some gems I had forgotten, and then going through the digital files
as well.
The funny thing is that I wrote the documentation for Traktor v. 2 but the
software is a little confusing. Who knew?
TCB
"Deej" <noway@jose.org> wrote:
>Very cool thad. Sounds like you scored. Jus the vibe alone could be
>inspirational......30 year old turntables? ....that still work????. that's
a
>pretty amazing survival story in itself.
>
>I've got an Ampeg B15N here that looked and smelled sorta' like what I think
>you're describing. It was the rankest, foulest POS when it arrived that
I
>could possibly imagine. It smelled like it had lived it's life in a St Louis
>Blues Bar. You could smell the cigarette smoke throughout the whole house.
>It took me about a month to clean it up to the point that it didn't stink
up
>the house.
>
>;o)
>
>
>;o)
>
>"TCB" <nobody@ishere.com> wrote in message news:476c2144$1@linux...
>>
>> So, a few months back an acquaintance owed me some money. Not a lot, a
few
>> hundred dollars for doing a bunch of computer editing for a hip hop
>> project.
>> He's a good guy, struggling to get a couple of local CT artists known.
>> Yes,
>> people in the hip hop world struggle, a lot some of the time. Anyway,
the
>> project was for a very good, edgy, female rapper and I think it came out
>> quite nicely. Then, my acquaintance had some personal money problems and
>> I was about to write the thing off as a complete loss. Not a huge deal,
my
>> day job is so off the charts busy I only take work I enjoy doing anyway.
>>
>>
>> So I politely ask him about the money a two or three times and he's
>> genuinely
>> upset he can't pay me. I don't hear anything for a while and then one
day
>> he calls to say that he has two Technics 1200s that he'd be willing to
>> give
>> me instead of cash. As an enthusiastic but not especially skilled DJ it's
>> kind of overkill for me, but what the hell, I take them. They're obviously
>> in need of some work, but they come with flight cases and have a certain
>> amount of cool to me because they've obviously been doing battle in the
>> hip
>> hop trenches forever. My guy was a professional DJ for a long, long time
>> and the cases are covered with stickers from Public Enemy, Noriega, Tupac,
>> and probably a dozen others. They've been sitting in my studio, used only
>> occasionally, for a while but as I'm probably taking over a night at a
>> club
>> again I thought I should get them some TLC
>>
>> So I took them to the best turntable guy I could find in CT. He's a
>> slightly
>> eccentric fellow but clearly knows what he's doing. There's fancy high
end
>> tube amps for audiophiles on the shelves, next to Parasound amps and all
>> that kind of stuff. So I lug in my battered up flight cases and leave
them
>> with him. Last night, they were done so I drove up to get them and hear
>> the
>> diagnosis. I walk in and he says, 'Hey, it's the duct tape guy.' To which
>> I reply that no, I did not put duct tape in the inside of my 12s. He goes
>> on to describe the shape they tables were in. First, he said that when
he
>> pulled the platters off there a thick coating of gunk, probably a
>> combination
>> of spilled beer, cigarette tar, and who knows what. So much of it that
he
>> was initially worried it might have ruined the motors in the decks.
>> Luckily,
>> that hadn't happened. The bearings were 'bone dry' and the previously
>> mentioned
>> duct tape had been used in various places. One headshell was wired
>> incorrectly
>> and the leads were almost rotted out. All that was fixed and we fired
them
>> up and they sound great.
>>
>> But here's the funny part. I thought they were a pair, but my repair guy
>> flipped one of them over to show me the serial number. It was made in
>> 1979!
>> That's only the second year Technics made the mkII, and it's freaking
>> almost
>> 30 years old. Then my repair guys said, 'These things are built like a
>> safe.
>> I'm sure this one has another 30 left in it.' Now I just have to learn
to
>> DJ as well as a guy who owns these should be able to.
>>
>
>
|
|
|
|
|
|
| Re: OT: the only 'vintage' thing in my studio other than me [message #93931 is a reply to message #93815] |
Sun, 23 December 2007 20:27 |
Bill L
Messages: 766
Registered: August 2006
|
Senior Member |
|
|
I've got my old Pioneer turntable from 1976 or so and it still works
though it needs a new belt. It starts out underspeed, then as it warms
up it comes up to pitch.
TCB wrote:
> So, a few months back an acquaintance owed me some money. Not a lot, a few
> hundred dollars for doing a bunch of computer editing for a hip hop project.
> He's a good guy, struggling to get a couple of local CT artists known. Yes,
> people in the hip hop world struggle, a lot some of the time. Anyway, the
> project was for a very good, edgy, female rapper and I think it came out
> quite nicely. Then, my acquaintance had some personal money problems and
> I was about to write the thing off as a complete loss. Not a huge deal, my
> day job is so off the charts busy I only take work I enjoy doing anyway.
>
>
> So I politely ask him about the money a two or three times and he's genuinely
> upset he can't pay me. I don't hear anything for a while and then one day
> he calls to say that he has two Technics 1200s that he'd be willing to give
> me instead of cash. As an enthusiastic but not especially skilled DJ it's
> kind of overkill for me, but what the hell, I take them. They're obviously
> in need of some work, but they come with flight cases and have a certain
> amount of cool to me because they've obviously been doing battle in the hip
> hop trenches forever. My guy was a professional DJ for a long, long time
> and the cases are covered with stickers from Public Enemy, Noriega, Tupac,
> and probably a dozen others. They've been sitting in my studio, used only
> occasionally, for a while but as I'm probably taking over a night at a club
> again I thought I should get them some TLC
>
> So I took them to the best turntable guy I could find in CT. He's a slightly
> eccentric fellow but clearly knows what he's doing. There's fancy high end
> tube amps for audiophiles on the shelves, next to Parasound amps and all
> that kind of stuff. So I lug in my battered up flight cases and leave them
> with him. Last night, they were done so I drove up to get them and hear the
> diagnosis. I walk in and he says, 'Hey, it's the duct tape guy.' To which
> I reply that no, I did not put duct tape in the inside of my 12s. He goes
> on to describe the shape they tables were in. First, he said that when he
> pulled the platters off there a thick coating of gunk, probably a combination
> of spilled beer, cigarette tar, and who knows what. So much of it that he
> was initially worried it might have ruined the motors in the decks. Luckily,
> that hadn't happened. The bearings were 'bone dry' and the previously mentioned
> duct tape had been used in various places. One headshell was wired incorrectly
> and the leads were almost rotted out. All that was fixed and we fired them
> up and they sound great.
>
> But here's the funny part. I thought they were a pair, but my repair guy
> flipped one of them over to show me the serial number. It was made in 1979!
> That's only the second year Technics made the mkII, and it's freaking almost
> 30 years old. Then my repair guys said, 'These things are built like a safe.
> I'm sure this one has another 30 left in it.' Now I just have to learn to
> DJ as well as a guy who owns these should be able to.
>
|
|
|
|
Goto Forum:
Current Time: Tue Nov 12 01:10:11 PST 2024
Total time taken to generate the page: 0.02100 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
