The PARIS Forums: PARIS: Main » VirtuaVia Chassis discontinued

Home » The PARIS Forums » PARIS: Main » VirtuaVia Chassis discontinued

Show: Today's Messages :: Polls :: Message Navigator

VirtuaVia Chassis discontinued [message #107947]

Thu, 24 October 2013 17:10

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Everyone,

We've had a setback today. The Virtuavia chassis has been discontinued and is sold out. This leaves the more expensive Magma P7NE board set with the pehifx1 PCIe host card that is also discontinued, but can be purchased on ebay from time to time.

I tried to order the ExpresCard adapter for the VirtuaVia chassis this morning. My thinking had been that I could use it with a thunderbolt to ExpressCard adapter to make an affordable OSX option for PARIS via ASIO.

VirtuaVia actually didn't get back to me, but Stephen was told today that the boards are out of stock and discontinued.

Does anyone know of an alternative supplier for keeping PARIS going in a Thunderbolt/PCIe world?

To be honest, the latest bunch of AMD motherboards with PCI slots are damn fast. If many of us are stuck at this motherboard generation, it really isn't so bad. I'd hoped to keep things moving forward, though.

Let me know what you guys think.

All the best,

Mike

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107950 is a reply to message #107947]

Fri, 25 October 2013 07:06

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

I ordered one of these yesterday:

http://www.ebay.com/itm/271262056943?ssPageName=STRK:MEWNX:I T&_trksid=p3984.m1439.l2649

It looks like each adapter will supply enough power for one EDS card. I'll post my findings once I try it.

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107961 is a reply to message #107950]

Wed, 06 November 2013 17:00

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Hey Mike, did you get a chance to test that adapter?

Thanks!
James

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107962 is a reply to message #107961]

Wed, 06 November 2013 17:58

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi James,

I'm still waiting for it to arrive. I've found that things shipped from Hong Kong can take a month to arrive.

I asked the seller, and he said that with a SATA power plug connected, it will deliver 100 watts to the two slots. I'm a little suspicious that he is mistaken, but even if he is, I bet it will work with an old Magma PCI chassis. And, those old 7 slot Magma PCI chassis are cheap.

I'll let you know when I get a chance to try it out.

All the best,

Mike

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107963 is a reply to message #107962]

Wed, 06 November 2013 18:41

inkycu

Messages: 36
Registered: December 2010

Member

Interesting adapter...I don't think I have enough room in my tower to fit any more EDS 1000 cards even though I have an open PCI-e...Is it possible to connect a ribbon cable from an internal EDS1000 to an external EDS1000?

Here's my MoBo: Asus AM3 E5888_M4A88TD-V-EVO-USB3_V2...It has 3 PCI slots.

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107968 is a reply to message #107963]

Thu, 07 November 2013 08:05

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

I Imagine that you couldn't use a ribbon cable long enough to fit some cards in the case and some outside of it.

I think this would be useful for putting a couple of cards inside a case, either below or above a micro atx board or in a 5 1/4 drive bay.

Or, it might be useful with something like this:
http://www.ebay.com/itm/AVID-PCI-EXTENDER-/120509443356?pt=L H_DefaultDomain_0&hash=item1c0eec2d1c

I'm not sure that listing includes the host card and cable, but these units are cheap even when complete. If a motherboard has no PCI slots, this could keep us going on new PCs.

All the best,

Mike

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107969 is a reply to message #107968]

Thu, 07 November 2013 10:32

inkycu

Messages: 36
Registered: December 2010

Member

Hi Mike,

For me this PCI-e to PCI adapter could be used to power my PCI sound/midi sound card. That would open a one of the 3 PCI slots so I can add another EDS-1000.

[Updated on: Thu, 07 November 2013 10:32]

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107970 is a reply to message #107969]

Thu, 07 November 2013 12:26

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Hey Mike, thanks! I spoke to tech support about that FoxConn MOBO, they told me that their MOBO is to PCI standards, so I'm going to give this MOBO a try. This could be an affordable answer for some Paris users. I need to upgrade my systems now, however I am in a bit of a financial crisis right now so this may take me some time to do.

If this MOBO works, it could be the answer for a lot of people for now. It has 6 PCI slots and will take up to an i7 slot 1155 SandyBridge or IvyBridge processor and up to 16 GB of RAM. One person did report that he had an Irq issue running more than three things with PCI cards, being a Mac guy, I don't know if this is going to be a real problem or not. Your thoughts on all of this would really be appreciated. By the way, the cost of the MOBO is about $65.00 US., at that price, Paris users might want to stock up if it works. I ordered mine today and will start looking for a deal on a processor, memory etc.

I also wanted to ask, do you think it makes sense to have Paris and UAD-1 cards on the same system?

Anyways, here is the MOBO info:

Foxconn H61AP LGA 1155 Intel H61 ATX Intel Motherboard

The tech support number I have is 714-626-6909, or 714-626-6900
http://www.foxconnsupport.com/

I hope this helps.

James

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107971 is a reply to message #107970]

Thu, 07 November 2013 12:55

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Mike, by the way, when you were talking about an OSX option for Paris via ASIO, did you mean using Paris hardware with a Mac running another software like Logic or Reaper? Or are you talking about a Mac OSX version of Paris?

As I have mentioned in the past, when I was a Paris dealer Edmond did demonstrate an OSX version of the Paris software on a lap top at Sweetwater sound, and it played a QuickTime video in the Paris window. I tried to get Edmond to release it, he wasn't interested in doing that at the time.

We should talk sometime, I might be able to give you some insight as to why things are, and are not. I think it might be helpful in the future.

James

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107972 is a reply to message #107971]

Thu, 07 November 2013 13:35

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi James,

I just sent you a PM.

I like the Foxconn board for the PCI slots, but the max memory speed is 1333 vs. 1600 on most motherboards. That probably doesn't mean much in terms of real performance, but it's something. It's also been discontinued.

I'd like to have options that allow us to use PARIS on any computer.

As for the Mac, I was thinking of porting the ASIO driver after I get it finished on the Windows side.

All the best,

Mike

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107976 is a reply to message #107972]

Fri, 08 November 2013 11:59

laurent

Messages: 39
Registered: February 2009

Member

hi all
the new paris asio driver !!!yes yes
thanks mr mike

laurent

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107981 is a reply to message #107976]

Tue, 26 November 2013 19:17

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

I just got the cheap two slot PCIe to PCI expansion unit today. I haven't tried to run PARIS from it, but the voltage regulator on the board is only rated for 5 amps, so it won't handle two EDS cards. One card should work fine, though. I'll post my results as soon as I get a chance to try it out.

All the best,

Mike

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107982 is a reply to message #107981]

Wed, 27 November 2013 03:53

dnafe

Messages: 390
Registered: February 2009

Senior Member

As always we await your comments

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107992 is a reply to message #107982]

Sun, 08 December 2013 11:38

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Everyone,

I tried to install the cheap 2 channel PCIe to PCI adapter, but the SATA power plug blocks the PCI slots. I'm going to have to try to find some kind of low profile SATA power adapter. If I can't find one, I'll try plugging in my old Avid branded Magma chassis to see if the host card for that is short enough to fit.

All the best,

Mike

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107995 is a reply to message #107992]

Wed, 11 December 2013 21:46

Studio111

Messages: 21
Registered: October 2010
Location: Silicon Valley

Junior Member

Isn't this the same "VirtuaVia Chassis" you are talking about? It doesn't appear to be discontinued...or is this the wrong item??

http://www.virtuavia.eu/shop/pcie-4-x-pci-expansion-atx-kit. html?sl=EN

Don

Report message to a moderator

Re: VirtuaVia Chassis discontinued [message #107996 is a reply to message #107995]

Thu, 12 December 2013 05:43

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Don,

It's the right item, but Stephen tried to order one, and they told him it was out of stock and they wouldn't be getting any more.

I've called them and emailed them repeatedly, and they haven't replied to me at all.

They also have netsor products listed on their main page, but if you click on them, there are no netsor products in the store. It's been that way for months, too. I'm not sure what is going on over there.

All the best,

Mike

Report message to a moderator

Previous Topic:	Unhandled exception coooooo5 at 0048c425
Next Topic:	The Loudness wars

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Sat Nov 30 09:51:19 PST 2024

Total time taken to generate the page: 0.01624 seconds