The PARIS Forums


Home » The PARIS Forums » PARIS: Main » weird error code
weird error code [message #92885] Mon, 19 November 2007 19:23 Go to next message
uptown jimmy is currently offline  uptown jimmy   
Messages: 441
Registered: September 2005
Senior Member
Here's one I've never seen: "Error in saving project. Error code 61448/f008."

And it's not just the last one I was working on, I can't save any project
file, with or without changes. What the unh-unh?!

I'm going to go ahead and get some work done tonight, and hope that the work
isn't lost somehow.

Jimmy
Re: weird error code [message #92887 is a reply to message #92885] Mon, 19 November 2007 19:56 Go to previous messageGo to next message
uptown jimmy is currently offline  uptown jimmy   
Messages: 441
Registered: September 2005
Senior Member
I tried to circumvent the problem and realized I get the same basic error
message when trying to render a track full of segments to disk: "Error in
rendering files to disk. Error code 61448/foo8".

I can't even go back to previous project files and start over. It just keeps
giving me the same error message.

I think the whole thing started when I rendered a segments from a few different
files to one file on one track. Things got glitchy when i did that last night.
I think. I've tried so many things since then...

WTF?!

Jimmy

"uptown jimmy" <johnson314@bellsouth.net> wrote:
>
>Here's one I've never seen: "Error in saving project. Error code 61448/f008."
>
>And it's not just the last one I was working on, I can't save any project
>file, with or without changes. What the unh-unh?!
>
>I'm going to go ahead and get some work done tonight, and hope that the
work
>isn't lost somehow.
>
>Jimmy
Re: weird error code [message #92888 is a reply to message #92887] Mon, 19 November 2007 20:56 Go to previous messageGo to next message
uptown jimmy is currently offline  uptown jimmy   
Messages: 441
Registered: September 2005
Senior Member
I just tried ninstaling/reinstalling Paris and all components and I got the
same result. I still can't save or render in any project. I am absolutely
flabbergasted, as I've used Paris since near the beginning and have never
before seen this error message.

Jimmy

"uptown jimmy" <johnson314@bellsouth.net> wrote:
>
>I tried to circumvent the problem and realized I get the same basic error
>message when trying to render a track full of segments to disk: "Error in
>rendering files to disk. Error code 61448/foo8".
>
>I can't even go back to previous project files and start over. It just keeps
>giving me the same error message.
>
>I think the whole thing started when I rendered a segments from a few different
>files to one file on one track. Things got glitchy when i did that last
night.
>I think. I've tried so many things since then...
>
>WTF?!
>
>Jimmy
>
>"uptown jimmy" <johnson314@bellsouth.net> wrote:
>>
>>Here's one I've never seen: "Error in saving project. Error code 61448/f008."
>>
>>And it's not just the last one I was working on, I can't save any project
>>file, with or without changes. What the unh-unh?!
>>
>>I'm going to go ahead and get some work done tonight, and hope that the
>work
>>isn't lost somehow.
>>
>>Jimmy
>
Re: weird error code [message #92891 is a reply to message #92888] Mon, 19 November 2007 20:41 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
Have you tried a save as in a different location?
AA

"uptown jimmy" <johnson314@bellsouth.net> wrote in message
news:47425aea$1@linux...
>
> I just tried ninstaling/reinstalling Paris and all components and I got
> the
> same result. I still can't save or render in any project. I am absolutely
> flabbergasted, as I've used Paris since near the beginning and have never
> before seen this error message.
>
> Jimmy
>
> "uptown jimmy" <johnson314@bellsouth.net> wrote:
>>
>>I tried to circumvent the problem and realized I get the same basic error
>>message when trying to render a track full of segments to disk: "Error in
>>rendering files to disk. Error code 61448/foo8".
>>
>>I can't even go back to previous project files and start over. It just
>>keeps
>>giving me the same error message.
>>
>>I think the whole thing started when I rendered a segments from a few
>>different
>>files to one file on one track. Things got glitchy when i did that last
> night.
>>I think. I've tried so many things since then...
>>
>>WTF?!
>>
>>Jimmy
>>
>>"uptown jimmy" <johnson314@bellsouth.net> wrote:
>>>
>>>Here's one I've never seen: "Error in saving project. Error code
>>>61448/f008."
>>>
>>>And it's not just the last one I was working on, I can't save any project
>>>file, with or without changes. What the unh-unh?!
>>>
>>>I'm going to go ahead and get some work done tonight, and hope that the
>>work
>>>isn't lost somehow.
>>>
>>>Jimmy
>>
>
Re: weird error code [message #92903 is a reply to message #92885] Tue, 20 November 2007 05:27 Go to previous messageGo to next message
Robert is currently offline  Robert   CANADA
Messages: 127
Registered: May 2007
Senior Member
Yea Jim, that's a strange one, as if you don't have full rites to the HD or
something. Have you tried saving to another / external drive, if you still
can't I would guess somekind of privilege status not set properly in windowz
maybe. Your other apps are saving fine are they? All your drives are showing
up in the bios boot sequence? Fat32, NTFS issues?

Good luck
Rob


"uptown jimmy" <johnson314@bellsouth.net> wrote in message
news:4742452f$1@linux...
>
> Here's one I've never seen: "Error in saving project. Error code
> 61448/f008."
>
> And it's not just the last one I was working on, I can't save any project
> file, with or without changes. What the unh-unh?!
>
> I'm going to go ahead and get some work done tonight, and hope that the
> work
> isn't lost somehow.
>
> Jimmy
Re: weird error code [message #92905 is a reply to message #92903] Tue, 20 November 2007 06:50 Go to previous messageGo to next message
John [1] is currently offline  John [1]
Messages: 2229
Registered: September 2005
Senior Member
I don't think I have that code but you can check under Bugs and Troubleshooting

http://kfocus.com/paris/
Re: weird error code [message #92907 is a reply to message #92885] Tue, 20 November 2007 07:01 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi your harddisk is full !!
:)
Regards,
Dimitrios

"uptown jimmy" <johnson314@bellsouth.net> wrote:
>
>Here's one I've never seen: "Error in saving project. Error code 61448/f008."
>
>And it's not just the last one I was working on, I can't save any project
>file, with or without changes. What the unh-unh?!
>
>I'm going to go ahead and get some work done tonight, and hope that the
work
>isn't lost somehow.
>
>Jimmy
Re: weird error code [message #92921 is a reply to message #92891] Tue, 20 November 2007 14:01 Go to previous messageGo to next message
uptown jimmy is currently offline  uptown jimmy   
Messages: 441
Registered: September 2005
Senior Member
Alright, kids. Thanks for chiming in.

I am able to save a project onto my "C" drive, but not onto my "E" (audio)
drive. I haven't tried to render a track onto my "C" drive, but I'm sure
it would work.

I suppose I can do some work tonight and just work with the project on my
"C" drive, which is fine for now, but it's not a great long-term solution
for me, as me and Swen regularly swap hardrives between computers. Are you
guys still using seperate drives for audio? Is it even necessary, strictly
speaking?

Maybe some of Rob's iideas are on the right track?

Thanks,
Jimmy



"Aaron Allen" <know-spam@not_here.dude> wrote:
>Have you tried a save as in a different location?
>AA
>
>"uptown jimmy" <johnson314@bellsouth.net> wrote in message
>news:47425aea$1@linux...
>>
>> I just tried ninstaling/reinstalling Paris and all components and I got

>> the
>> same result. I still can't save or render in any project. I am absolutely
>> flabbergasted, as I've used Paris since near the beginning and have never
>> before seen this error message.
>>
>> Jimmy
>>
>> "uptown jimmy" <johnson314@bellsouth.net> wrote:
>>>
>>>I tried to circumvent the problem and realized I get the same basic error
>>>message when trying to render a track full of segments to disk: "Error
in
>>>rendering files to disk. Error code 61448/foo8".
>>>
>>>I can't even go back to previous project files and start over. It just

>>>keeps
>>>giving me the same error message.
>>>
>>>I think the whole thing started when I rendered a segments from a few

>>>different
>>>files to one file on one track. Things got glitchy when i did that last
>> night.
>>>I think. I've tried so many things since then...
>>>
>>>WTF?!
>>>
>>>Jimmy
>>>
>>>"uptown jimmy" <johnson314@bellsouth.net> wrote:
>>>>
>>>>Here's one I've never seen: "Error in saving project. Error code
>>>>61448/f008."
>>>>
>>>>And it's not just the last one I was working on, I can't save any project
>>>>file, with or without changes. What the unh-unh?!
>>>>
>>>>I'm going to go ahead and get some work done tonight, and hope that the
>>>work
>>>>isn't lost somehow.
>>>>
>>>>Jimmy
>>>
>>
>
>
Re: weird error code [message #92925 is a reply to message #92921] Tue, 20 November 2007 18:07 Go to previous messageGo to next message
John [1] is currently offline  John [1]
Messages: 2229
Registered: September 2005
Senior Member
Putting audio on a separate is a very good idea because this way you OS is
not seeking the drive while audio is trying to stream to it.
Re: weird error code [message #92926 is a reply to message #92925] Tue, 20 November 2007 18:30 Go to previous messageGo to next message
uptown jimmy is currently offline  uptown jimmy   
Messages: 441
Registered: September 2005
Senior Member
So I guess maybe I'll just reformat the "E" drive, see what happens.

Jimmy

"john" <no@no.com> wrote:
>
>Putting audio on a separate is a very good idea because this way you OS
is
>not seeking the drive while audio is trying to stream to it.
Re: weird error code [message #92928 is a reply to message #92921] Tue, 20 November 2007 17:53 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
Sounds kind of like you pissed off XP's sense of security. Go to.....

My Computer: right click E drive.
Go to security tab. Give everyone full control. Reboot.

Still got that issue?

AA


"uptown jimmy" <johnson314@bellsouth.net> wrote in message
news:47434b36$1@linux...
>
> Alright, kids. Thanks for chiming in.
>
> I am able to save a project onto my "C" drive, but not onto my "E" (audio)
> drive. I haven't tried to render a track onto my "C" drive, but I'm sure
> it would work.
>
> I suppose I can do some work tonight and just work with the project on my
> "C" drive, which is fine for now, but it's not a great long-term solution
> for me, as me and Swen regularly swap hardrives between computers. Are you
> guys still using seperate drives for audio? Is it even necessary, strictly
> speaking?
>
> Maybe some of Rob's iideas are on the right track?
>
> Thanks,
> Jimmy
>
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>Have you tried a save as in a different location?
>>AA
>>
>>"uptown jimmy" <johnson314@bellsouth.net> wrote in message
>>news:47425aea$1@linux...
>>>
>>> I just tried ninstaling/reinstalling Paris and all components and I got
>
>>> the
>>> same result. I still can't save or render in any project. I am
>>> absolutely
>>> flabbergasted, as I've used Paris since near the beginning and have
>>> never
>>> before seen this error message.
>>>
>>> Jimmy
>>>
>>> "uptown jimmy" <johnson314@bellsouth.net> wrote:
>>>>
>>>>I tried to circumvent the problem and realized I get the same basic
>>>>error
>>>>message when trying to render a track full of segments to disk: "Error
> in
>>>>rendering files to disk. Error code 61448/foo8".
>>>>
>>>>I can't even go back to previous project files and start over. It just
>
>>>>keeps
>>>>giving me the same error message.
>>>>
>>>>I think the whole thing started when I rendered a segments from a few
>
>>>>different
>>>>files to one file on one track. Things got glitchy when i did that last
>>> night.
>>>>I think. I've tried so many things since then...
>>>>
>>>>WTF?!
>>>>
>>>>Jimmy
>>>>
>>>>"uptown jimmy" <johnson314@bellsouth.net> wrote:
>>>>>
>>>>>Here's one I've never seen: "Error in saving project. Error code
>>>>>61448/f008."
>>>>>
>>>>>And it's not just the last one I was working on, I can't save any
>>>>>project
>>>>>file, with or without changes. What the unh-unh?!
>>>>>
>>>>>I'm going to go ahead and get some work done tonight, and hope that the
>>>>work
>>>>>isn't lost somehow.
>>>>>
>>>>>Jimmy
>>>>
>>>
>>
>>
>
Re: weird error code [message #92930 is a reply to message #92907] Tue, 20 November 2007 19:03 Go to previous message
uptown jimmy is currently offline  uptown jimmy   
Messages: 441
Registered: September 2005
Senior Member
Oh my god, you're right! Yay Dimitrios!

Pardon my language, but what a complete dumbass I am. It's a good thing I'm
a musician and not a computer scientist.

I am ashamed, so very ashamed...

And so we push onwards.

BTW, me and Swen just signed a licensing deal with a pretty successful company.
These guys have had several lucrative placements with film and TV, including
"Grey's Anatomy", so we're pretty excited. They came looking for us about
a week after we started handing out CDs to friends for feedback after years
of working on this music, so we feel confident they are going to work hard
on our behalf. We're excited!

Jimmy

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi your harddisk is full !!
>:)
>Regards,
>Dimitrios
>
>"uptown jimmy" <johnson314@bellsouth.net> wrote:
>>
>>Here's one I've never seen: "Error in saving project. Error code 61448/f008."
>>
>>And it's not just the last one I was working on, I can't save any project
>>file, with or without changes. What the unh-unh?!
>>
>>I'm going to go ahead and get some work done tonight, and hope that the
>work
>>isn't lost somehow.
>>
>>Jimmy
>
Previous Topic: Quieter PC - AMD or Intel?
Next Topic: OK. for you native guys-more RME/UAD/POCO madness-here's something useful (I hope)
Goto Forum:
  


Current Time: Sun Dec 15 22:38:12 PST 2024

Total time taken to generate the page: 0.01496 seconds