The PARIS Forums: PARIS: Main » a small but positive Pulsar development

Home » The PARIS Forums » PARIS: Main » a small but positive Pulsar development

Show: Today's Messages :: Polls :: Message Navigator

a small but positive Pulsar development [message #75851]

Fri, 10 November 2006 22:24

Messages: 1124
Registered: July 2005

Senior Member

I have just tested a 30" STDM cable and it works. There was some question as
to whether this length would be a problem. This will allow me to use 2 x
Pulsar's in my 7 slot Magma and on in a mobo PCI slot in a similar
configuration as I was doing with the RME HDSP cards. My 3rd Pulsar card
will be here next week. Unless there is an issue with a 24" cable run
between the 1st and 2nd Pulsar cards and only a 6" cable run between the 2nd
and third card, I should be good to go.

This is good news and if it works, it will same me a lot of hassles.

;o)

Report message to a moderator

Re: a small but positive Pulsar development [message #75853 is a reply to message #75851]

Sat, 11 November 2006 08:42

gene lennon
Messages: 565
Registered: July 2006

Senior Member

"DJ" <nowayjose@dude.net> wrote:
>I have just tested a 30" STDM cable and it works. There was some question
as
>to whether this length would be a problem. This will allow me to use 2
x
>Pulsar's in my 7 slot Magma and on in a mobo PCI slot in a similar
>configuration as I was doing with the RME HDSP cards. My 3rd Pulsar card
>will be here next week. Unless there is an issue with a 24" cable run
>between the 1st and 2nd Pulsar cards and only a 6" cable run between the
2nd
>and third card, I should be good to go.
>
>This is good news and if it works, it will same me a lot of hassles.
>
>;o)
>

DJ,
Did you ever find a substitute source for Magma flat ribbon cables? I am
missing one and I need to get that box working.
Gene

Report message to a moderator

Re: a small but positive Pulsar development [message #75855 is a reply to message #75853]

Sat, 11 November 2006 09:04

Messages: 1124
Registered: July 2005

Senior Member

Gene,

I'm looking but can't seem to find it.

Deej

"Gene Lennon" <glennon@NOSPmyrealbox.com> wrote in message
news:4555ef62$1@linux...
>
> "DJ" <nowayjose@dude.net> wrote:
> >I have just tested a 30" STDM cable and it works. There was some question
> as
> >to whether this length would be a problem. This will allow me to use 2
> x
> >Pulsar's in my 7 slot Magma and on in a mobo PCI slot in a similar
> >configuration as I was doing with the RME HDSP cards. My 3rd Pulsar card
> >will be here next week. Unless there is an issue with a 24" cable run
> >between the 1st and 2nd Pulsar cards and only a 6" cable run between the
> 2nd
> >and third card, I should be good to go.
> >
> >This is good news and if it works, it will same me a lot of hassles.
> >
> >;o)
> >
>
> DJ,
> Did you ever find a substitute source for Magma flat ribbon cables? I am
> missing one and I need to get that box working.
> Gene
>

Report message to a moderator

Re: a small but positive Pulsar development [message #75856 is a reply to message #75853]

Sat, 11 November 2006 09:27

Messages: 1124
Registered: July 2005

Senior Member

Gene,

CS Electronics (949) 475-9100

Good luck

;o)

"Gene Lennon" <glennon@NOSPmyrealbox.com> wrote in message
news:4555ef62$1@linux...
>
> "DJ" <nowayjose@dude.net> wrote:
> >I have just tested a 30" STDM cable and it works. There was some question
> as
> >to whether this length would be a problem. This will allow me to use 2
> x
> >Pulsar's in my 7 slot Magma and on in a mobo PCI slot in a similar
> >configuration as I was doing with the RME HDSP cards. My 3rd Pulsar card
> >will be here next week. Unless there is an issue with a 24" cable run
> >between the 1st and 2nd Pulsar cards and only a 6" cable run between the
> 2nd
> >and third card, I should be good to go.
> >
> >This is good news and if it works, it will same me a lot of hassles.
> >
> >;o)
> >
>
> DJ,
> Did you ever find a substitute source for Magma flat ribbon cables? I am
> missing one and I need to get that box working.
> Gene
>

Report message to a moderator

Re: a small but positive Pulsar development [message #75857 is a reply to message #75856]

Sat, 11 November 2006 10:38

gene lennon
Messages: 565
Registered: July 2006

Senior Member

"DJ" <nowayjose@dude.net> wrote:
>Gene,
>
>CS Electronics (949) 475-9100
>
>Good luck
>
>;o)
>
>
>"Gene Lennon" <glennon@NOSPmyrealbox.com> wrote in message
>news:4555ef62$1@linux...
>>
>> "DJ" <nowayjose@dude.net> wrote:
>> >I have just tested a 30" STDM cable and it works. There was some question
>> as
>> >to whether this length would be a problem. This will allow me to use
2
>> x
>> >Pulsar's in my 7 slot Magma and on in a mobo PCI slot in a similar
>> >configuration as I was doing with the RME HDSP cards. My 3rd Pulsar card
>> >will be here next week. Unless there is an issue with a 24" cable run
>> >between the 1st and 2nd Pulsar cards and only a 6" cable run between
the
>> 2nd
>> >and third card, I should be good to go.
>> >
>> >This is good news and if it works, it will same me a lot of hassles.
>> >
>> >;o)
>> >
>>
>> DJ,
>> Did you ever find a substitute source for Magma flat ribbon cables? I
am
>> missing one and I need to get that box working.
>> Gene
>>
>

Thanks
Gene

Report message to a moderator

Previous Topic:	DESPERATELY NEED SOME HELP (personal ;_)
Next Topic:	message from democrats

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Oct 23 13:31:15 PDT 2024

Total time taken to generate the page: 0.01405 seconds