The PARIS Forums: PARIS: Main » How to mount your eds cards in pcie slots

Home » The PARIS Forums » PARIS: Main » How to mount your eds cards in pcie slots

Show: Today's Messages :: Polls :: Message Navigator

How to mount your eds cards in pcie slots [message #108450]

Fri, 07 November 2014 14:03

Richard Kelley

Messages: 44
Registered: June 2013
Location: Ct.

Member

StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1) I don't know if anyone has tried these, I did some quick reading, if you have open pcie slots you can mount your card in the same tower. Just some info., I found while surfing! Rich Very Happy

Report message to a moderator

Re: How to mount your eds cards in pcie slots [message #108458 is a reply to message #108450]

Sun, 09 November 2014 15:32

Studio111

Messages: 21
Registered: October 2010
Location: Silicon Valley

Junior Member

check this out also:

http://www.aliexpress.com/store/product/PCIe-To-PCI-Dual-Slo t-Adapter-Card-PCI-Express/909573_558769291.html

Report message to a moderator

Re: How to mount your eds cards in pcie slots [message #108463 is a reply to message #108458]

Sun, 16 November 2014 18:41

RonA

Messages: 27
Registered: September 2009
Location: Colorado

Junior Member

Does this go inside the tower? I would love to resurrect my beloved PARIS system with a new WIN 7 64 computer. I need two more EDS cards and the least expensive way to mount 3 EDS cards total in the computer. I know this subject has been broached many times, but perhaps this product would provide a much less expensive avenue. I am not a computer-build person, so any additional info re the utilization of this PCI adapter would be greatly appreciated. I plan to use DP 8 (already purchased) as my sequencer, and on a separate computer (already own it)I have an extensive VI library accessed through Mach 5-3. Thanks for any and all help!

Report message to a moderator

Re: How to mount your eds cards in pcie slots [message #108466 is a reply to message #108463]

Mon, 17 November 2014 09:25

Richard Kelley

Messages: 44
Registered: June 2013
Location: Ct.

Member

I am not the best computer builder, but if you are going to use multiple eds cards I would recommend getting A viruta adapter card set up, and mount your cards in a separate tower. I have mine in a rack mountable tower case. It is nice because it will give the cards their own power supply, there will be basically not heat so the only fan necessary is the fan in your power supply. The adapter is listed on previous postings, I know Mike has posted info. on the adapter. If you are interested get back and I will dig up where to get the adapter came from if you can't find it on the site. You should check out the forum, there is a lot of good info., and Mike Audet and Kerry are really good guys. Let me know, Rich

Report message to a moderator

Previous Topic:	Paris Videos
Next Topic:	HELP - Patch bay set up - brain fade

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Feb 21 12:30:21 PST 2025

Total time taken to generate the page: 0.00951 seconds