|
|
|
|
|
|
|
|
|
|
| Re: Paris Aux effects issue [message #74674 is a reply to message #74657] |
Mon, 23 October 2006 10:34   |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
It could be that your daughtercard has gone south.
I had a card with a bad daughtercard, and it would make weird noises when trying to use the effects.
If it passes audio otherwise, I would guess that to be the problem.
Cheers,
TC
Spappy wrote:
> It was a really wierd problem. But I replaced EDS card and problem went
> away. Still trying to figure out what the deal is on that.
>
> Spappy
>
>
>
> "Jeff hoover" <jkhoover@excite.com> wrote in message news:453c541b@linux...
>> Spappy,
>>
>> Don't know if this applies, but I had a similar effect pulling up projects
>> that hadn't been saved since I added a word clock. If this could apply,
>> double check your clock and sample rate settings.
>>
>> Hope this helps,
>>
>> Jeff
>>
>> Spappy wrote:
>>> When I load a project that was originally started on a different Paris
>>> system, it seems to get this pulsating feedback loop going on whichever
>>> effect is on Aux 1. I have tried removing the effect and it stops, but
>>> even if I assign the same effect to another aux (like aux 3 for instance)
>>> it still does it. So it seems to be corrupting the effect. Doesn't matter
>>> which effect it is.
>>>
>>> How can I fix this?
>>>
>>> Spappy
>
>
|
|
|
|
| Re: Paris Aux effects issue [message #74679 is a reply to message #74674] |
Mon, 23 October 2006 11:04 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
Pull the daughterboard off and clean the contacts with a nice de-oxit
type cleaner.
JOhn
TC wrote:
> It could be that your daughtercard has gone south.
> I had a card with a bad daughtercard, and it would make weird noises
> when trying to use the effects.
>
> If it passes audio otherwise, I would guess that to be the problem.
>
> Cheers,
>
> TC
>
> Spappy wrote:
>> It was a really wierd problem. But I replaced EDS card and problem
>> went away. Still trying to figure out what the deal is on that.
>>
>> Spappy
>>
>>
>>
>> "Jeff hoover" <jkhoover@excite.com> wrote in message
>> news:453c541b@linux...
>>> Spappy,
>>>
>>> Don't know if this applies, but I had a similar effect pulling up
>>> projects that hadn't been saved since I added a word clock. If this
>>> could apply, double check your clock and sample rate settings.
>>>
>>> Hope this helps,
>>>
>>> Jeff
>>>
>>> Spappy wrote:
>>>> When I load a project that was originally started on a different
>>>> Paris system, it seems to get this pulsating feedback loop going on
>>>> whichever effect is on Aux 1. I have tried removing the effect and
>>>> it stops, but even if I assign the same effect to another aux (like
>>>> aux 3 for instance) it still does it. So it seems to be corrupting
>>>> the effect. Doesn't matter which effect it is.
>>>>
>>>> How can I fix this?
>>>>
>>>> Spappy
>>
>>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
