The PARIS Forums: PARIS: Projects » Should I resurrect the motorized fader C-16 replacement project?

Home » The PARIS Forums » PARIS: Projects » Should I resurrect the motorized fader C-16 replacement project?

Show: Today's Messages :: Polls :: Message Navigator

Should I resurrect the motorized fader C-16 replacement project? [message #106084]

Sun, 13 March 2011 09:21

Doug Wellington

Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA

Senior Member

Should I resurrect the motorized fader C-16 replacement project?[ 23 votes ]
1.	Yes, I want a motorized C-16 for use with only PARIS.	6 / 26%
2.	Yes, I want a motorized c-16 for use with all my software including PARIS.	17 / 74%
3.	No, I don't want a motorized fader control.	0 / 0%

When the PARIS newsgroup disappeared, I thought the PARIS community had finally given up, so I dropped my plans for anything more than one-off projects for myself.

Are there enough of us still around to make it worth while to resurrect these projects?

http://www.parisfaqs.com

[Updated on: Sun, 13 March 2011 09:23]

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106085 is a reply to message #106084]

Sun, 13 March 2011 10:11

thesandbox1

Messages: 167
Registered: July 2009
Location: Carmel, IN

Senior Member

Voted 2....to work with Reaper would be great!

1 would be nice too and I know the C16 faders would definitely get more use Wink

Wink

Also might want to move this to the main forum as I know it gets most of the visits it seems.

Matt
www.sandboxproductions.com

https://www.facebook.com/Sandbox-Productions-Recording-Studi o-Carmel-IN-122733877784336/

[Updated on: Sun, 13 March 2011 10:12]

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106089 is a reply to message #106084]

Sun, 13 March 2011 13:11

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

Yes, if possible esp to run with other software, esp if MA gets ASIO working

So I guess that's two qualifications...

Ted

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106092 is a reply to message #106085]

Sun, 13 March 2011 13:46

dnafe

Messages: 390
Registered: February 2009

Senior Member

Dumb Q

What would this retrofit project cost, ballpark?

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106101 is a reply to message #106092]

Sun, 13 March 2011 18:36

Doug Wellington

Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA

Senior Member

Hard to say how much it will cost. Depends greatly on how many I make. If it's just a couple, we're probably talking $500+ each. The faders I'm using (same as the ones in the Euphonix Artist Series) are $12 each, so that's a couple hundred bucks right there...

http://www.parisfaqs.com

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106117 is a reply to message #106101]

Tue, 15 March 2011 05:38

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

Wow, that's a lot less than I thought. I'd probably jump right in even if they only worked for Paris.

Assuming it will behave in hardware just as the automation in software does, with flipping between the submixes recalling automation for those mixes etc etc

Yeah, I'm in.

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106124 is a reply to message #106117]

Tue, 15 March 2011 14:32

dnafe

Messages: 390
Registered: February 2009

Senior Member

If you could get it to interface with Reaper I'd definitely be interested...hell I'd buy a couple more C16s just for that...oops this might start a run on C16s....never mind

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106126 is a reply to message #106124]

Tue, 15 March 2011 14:42

Doug Wellington

Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA

Senior Member

No C16 required. This is a complete replacement...

http://www.parisfaqs.com

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106131 is a reply to message #106126]

Tue, 15 March 2011 15:22

kerryg

Messages: 1529
Registered: February 2009

Senior Member
Administrator

Hey Doug - have you considered breaking this into two discrete projects - one a "motorized C16" and the other a smaller "line lump" that would sit between any C16 and the EDS card and have a MIDI out jack on it?

That second box would leave people with a C16 that was platform and driver independent. Most of the development would be stuff you'd be doing for the motorized fader box anyway; the comparative hardware costs for the line-lump would be peanuts, and the market comparatively larger (folks that might hesistate at buying a $500 motorized fader controller would buy a $75 "turn your C16 into a MIDI controller" box without a second thought).

I can't wait until you and Mike get talking. He's bootstrapped himself into being a formidable coder and he's an absolutely great guy. He's put some time into scrutinizing the C16's quasi-midi "language" since his plan is to have it show up to the OS as a MIDI controller once the Win7 64bit drivers are licked.

Inspiring stuff!

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106136 is a reply to message #106131]

Tue, 15 March 2011 20:42

Doug Wellington

Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA

Senior Member

kerryg wrote on Tue, 15 March 2011 15:22

have you considered breaking this into two discrete projects - one a "motorized C16" and the other a smaller "line lump" that would sit between any C16 and the EDS card and have a MIDI out jack on it?

I thought that one other guy already did the MIDI out thing?

Quote:

the comparative hardware costs for the line-lump would be peanuts, and the market comparatively larger (folks that might hesistate at buying a $500 motorized fader controller would buy a $75 "turn your C16 into a MIDI controller" box without a second thought).

Sure, I think you're right on that. I suppose I should consider resurrecting the wireless module project too...

Quote:

I can't wait until you and Mike get talking. He's bootstrapped himself into being a formidable coder and he's an absolutely great guy. He's put some time into scrutinizing the C16's quasi-midi "language" since his plan is to have it show up to the OS as a MIDI controller once the Win7 64bit drivers are licked.

Sounds good. I had communicated with him a long time ago, but we lost touch without doing anything...

http://www.parisfaqs.com

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106137 is a reply to message #106136]

Wed, 16 March 2011 05:39

drfrankencopter

Messages: 137
Registered: July 2009

Senior Member

I like the 'green' aspects of converting the C-16 into a generic midi interface (preferably one that speaks the MCU protocol). Re-use and Re-cycle!

I've got 3 of these things......

Cheers

Kris

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106409 is a reply to message #106126]

Sun, 15 May 2011 14:55

uptown jimmy

Messages: 441
Registered: September 2005

Senior Member

Doug Wellington wrote on Tue, 15 March 2011 14:42

No C16 required. This is a complete replacement...

Ok, I'm intrigued. Would this thing be only faders? Or transport controls and such as well? How would it behave across submixes?

Jimmy

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106412 is a reply to message #106409]

Sun, 15 May 2011 18:43

Doug Wellington

Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA

Senior Member

Pretty much a clone of the C-16 with all buttons, knobs and faders. (No up and down leds though.)

http://www.parisfaqs.com

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106413 is a reply to message #106412]

Sun, 15 May 2011 18:49

uptown jimmy

Messages: 441
Registered: September 2005

Senior Member

I'd find the money.

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #106517 is a reply to message #106084]

Mon, 13 June 2011 23:54

hungaristan

Messages: 32
Registered: December 2009

Member

Count me in for the line-lump.

endrehuszar.com

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #107805 is a reply to message #106084]

Thu, 11 July 2013 01:20

harry e

Messages: 18
Registered: August 2010
Location: palo alto, california

Junior Member

i'm in!, for ANYTHING that might be developed along this line! paris is still the best!

harry kenneth epstein

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #108037 is a reply to message #107805]

Tue, 14 January 2014 09:45

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

I'd be in, especially if it would work with other software.

James

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #108039 is a reply to message #108037]

Tue, 14 January 2014 10:08

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

My reply from the Adat thread...

Sorry to mix the threads. Yeah, it looks like my idea would be too much work. If the end cost would only be around $500.00, it makes sense to build new. I will mention that when Paris Pro 3.0 was released it was supposed to work with third party control surfaces. It is in the press releases, and as a dealer, I was told that they had it working with the CM MotorMix and a german control surface called the K2. It might be an easier way to go, to get Paris to work with an existing control surface. However, your idea to build a new C-16 is the best.

Third party control surfaces are mentioned in this release.

http://www.digitalprosound.com/2001/02_feb/news/emu-paris.ht m

[Updated on: Tue, 14 January 2014 16:06]

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #108040 is a reply to message #108039]

Tue, 14 January 2014 11:25

Doug Wellington

Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA

Senior Member

excelav wrote on Tue, 14 January 2014 11:08

Third party control surfaces are mentioned in this release.
http://www.digitalprosound.com/2001/02_feb/news/emu-paris.ht m

Wowsers, that's right, 2001! Sigh... What a shame that everything worked out the way it did. It could have been great!

At the same time, if it *had* worked out, we wouldn't have the best "vintage" DAW ever! Laughing

Laughing

http://www.parisfaqs.com

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #108396 is a reply to message #106084]

Sat, 13 September 2014 15:49

harry e

Messages: 18
Registered: August 2010
Location: palo alto, california

Junior Member

HECK YEAH!
ARE YOU KIDDING?
i'd be SOOOOO happy and grateful, if someone could come up with a motorized c-16! either one would do very nicely! (whether just for paris, or to include controlling various other software also)---
i still absolutely LOVE my paris system, and it still totally astonishes me, every time i use it. i don't care what other systems are out there nowadays, and it doesn't matter that software and hardware improvements and developements have come to a dead end on it, i still far prefer to work in the absolutely beautiful and gorgeous paris system! and having a motorized c-16 would just be TOTALLY awsome! anyone contemplating developing one, i very highly encourage you to do so!!!

harry kenneth epstein

Report message to a moderator

Re: Should I resurrect the motorized fader C-16 replacement project? [message #108459 is a reply to message #106084]

Mon, 10 November 2014 14:18

officialmy

Messages: 4
Registered: October 2014
Location: Canada

Junior Member

Hell ya @Doug

Anything that got to do with PARIS. If you can make the C-16 work with PARIS but also with other DAWs like Studio One etc.. I'm in and I would even send you the money more then 50% upfront Wink

Wink

MY
Music Producer-Mix Engineer-Entrepreneur

[Updated on: Mon, 10 November 2014 14:19]

Report message to a moderator

Previous Topic:	Reverse engineering the MEC expansion cards...
Next Topic:	paris recording

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Wed Mar 26 04:56:53 PDT 2025

Total time taken to generate the page: 0.02047 seconds