The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Wordclock help needed !!
Wordclock help needed !! [message #73955] Fri, 13 October 2006 06:56 Go to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi,
Not only DJ but my humble setup is a crazy one too.
For now I connect like this:
Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
CONVERTER.
Soundscape's wordclock out goes to Mec 1
Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec via
wordclock.
Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF out
and same SS8IO-3 send via wordclock clock to 3rd mec.
With me so far ?
Now the fun part.
First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF conncetion.

1st Mec sends wordclock out to a Behringer ultramizer which reclocks my main
AD converter which has no w/c in out.
2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with daisy
chaining
3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
Pulsar Creamware of course is the master device.
ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
Now whose wordclock setup is the crazyest mine or DJ's ?

Now here is the real question.
If I use a clock generator I will need 8-10 clock outputs to clock everything.
I don't wanna spend more than 600-700 $ for a complete wordclock setup that
will be stable and hassle free and soundwise better than Paris clock.
I thought of the HOSA cheap and a distributor.
I thought of having ADI-PRO8 rme as master and buy just a distributor like
Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
of RME as master.
Anyone to rescue me ?
Regards,
Dimitrios
Re: Wordclock help needed !! [message #73956 is a reply to message #73955] Fri, 13 October 2006 06:58 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
One crazy question.
What bhappens if you use a T connector to split clock output on ,say, a Hosa
clock generator which has 4 outs so will get 8 ?
Is this a no-no ?
Regards,
Dimitrios

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>Not only DJ but my humble setup is a crazy one too.
>For now I connect like this:
>Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
>CONVERTER.
>Soundscape's wordclock out goes to Mec 1
>Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
via
>wordclock.
>Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF out
>and same SS8IO-3 send via wordclock clock to 3rd mec.
>With me so far ?
>Now the fun part.
>First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
conncetion.
>
>1st Mec sends wordclock out to a Behringer ultramizer which reclocks my
main
>AD converter which has no w/c in out.
>2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with daisy
>chaining
>3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
>Pulsar Creamware of course is the master device.
>ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
>Now whose wordclock setup is the crazyest mine or DJ's ?
>
>Now here is the real question.
>If I use a clock generator I will need 8-10 clock outputs to clock everything.
>I don't wanna spend more than 600-700 $ for a complete wordclock setup that
>will be stable and hassle free and soundwise better than Paris clock.
>I thought of the HOSA cheap and a distributor.
>I thought of having ADI-PRO8 rme as master and buy just a distributor like
>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
>of RME as master.
>Anyone to rescue me ?
>Regards,
>Dimitrios
>
Re: Wordclock help needed !! [message #73961 is a reply to message #73955] Fri, 13 October 2006 07:50 Go to previous messageGo to next message
gene lennon is currently offline  gene lennon
Messages: 565
Registered: July 2006
Senior Member
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>Not only DJ but my humble setup is a crazy one too.
>For now I connect like this:
>Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
>CONVERTER.
>Soundscape's wordclock out goes to Mec 1
>Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
via
>wordclock.
>Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF out
>and same SS8IO-3 send via wordclock clock to 3rd mec.
>With me so far ?
>Now the fun part.
>First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
conncetion.
>
>1st Mec sends wordclock out to a Behringer ultramizer which reclocks my
main
>AD converter which has no w/c in out.
>2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with daisy
>chaining
>3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
>Pulsar Creamware of course is the master device.
>ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
>Now whose wordclock setup is the crazyest mine or DJ's ?
>
>Now here is the real question.
>If I use a clock generator I will need 8-10 clock outputs to clock everything.
>I don't wanna spend more than 600-700 $ for a complete wordclock setup that
>will be stable and hassle free and soundwise better than Paris clock.
>I thought of the HOSA cheap and a distributor.
>I thought of having ADI-PRO8 rme as master and buy just a distributor like
>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
>of RME as master.
>Anyone to rescue me ?
>Regards,
>Dimitrios
>

I also have a fairly complicated digital setup and use a Mytek for master
wordclock. I do not run multiple parallel wordclocks and my setup works fine
with no real wordclock issues. Why don’t you borrow a wordclock generator
and see if you can just go directly to the Pulsar Creamware card and switch
it to external leaving everything else untouched. I can’t guarantee it but
it’s worth trying.

You are not using the Paris wordclock (which is not terrible). I thought
the Creamware clock was considered ok, are you sure you will hear any improvement
short of a very high-end clock? A Big Ben or Mytek would probably make a
noticeable improvement. All the more reason to borrow one first.
Re: Wordclock help needed !! [message #73965 is a reply to message #73961] Fri, 13 October 2006 09:06 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi,
Here in Greece there is no such option from any store !
I see most wordclock generators are 6 output wise !
What do you do if you need say 8 or nine ?
Regards,
Dimitrios

"gene Lennon" <glennon@NOSPmyrealbox.com> wrote:
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Hi,
>>Not only DJ but my humble setup is a crazy one too.
>>For now I connect like this:
>>Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
>>CONVERTER.
>>Soundscape's wordclock out goes to Mec 1
>>Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
>via
>>wordclock.
>>Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF out
>>and same SS8IO-3 send via wordclock clock to 3rd mec.
>>With me so far ?
>>Now the fun part.
>>First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
>conncetion.
>>
>>1st Mec sends wordclock out to a Behringer ultramizer which reclocks my
>main
>>AD converter which has no w/c in out.
>>2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with
daisy
>>chaining
>>3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
>>Pulsar Creamware of course is the master device.
>>ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
>>Now whose wordclock setup is the crazyest mine or DJ's ?
>>
>>Now here is the real question.
>>If I use a clock generator I will need 8-10 clock outputs to clock everything.
>>I don't wanna spend more than 600-700 $ for a complete wordclock setup
that
>>will be stable and hassle free and soundwise better than Paris clock.
>>I thought of the HOSA cheap and a distributor.
>>I thought of having ADI-PRO8 rme as master and buy just a distributor like
>>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
>>of RME as master.
>>Anyone to rescue me ?
>>Regards,
>>Dimitrios
>>
>
>I also have a fairly complicated digital setup and use a Mytek for master
>wordclock. I do not run multiple parallel wordclocks and my setup works
fine
>with no real wordclock issues. Why don’t you borrow a wordclock generator
>and see if you can just go directly to the Pulsar Creamware card and switch
>it to external leaving everything else untouched. I can’t guarantee it but
>it’s worth trying.
>
>You are not using the Paris wordclock (which is not terrible). I thought
>the Creamware clock was considered ok, are you sure you will hear any improvement
>short of a very high-end clock? A Big Ben or Mytek would probably make a
>noticeable improvement. All the more reason to borrow one first.
>
Re: Wordclock help needed !! [message #73969 is a reply to message #73965] Fri, 13 October 2006 09:34 Go to previous messageGo to next message
animix is currently offline  animix   UNITED STATES
Messages: 356
Registered: September 2006
Senior Member
A Lucid GenX6 gives you 6 WC outputs. Adding a Lucid CLK-6 gives you another
6 WC outputs, but you lose one GenX6 output to connect to the CLK-6 so you
end up with 11 clock outputs total. I'm not really convinced that using
clock regenerators is the best of solutions, but it may work for you.

As far as Mytek gear goes, I was also using the WC output of a Mytek Stereo
96 A/D converter for my house clock until it went south on me. I can no
longer get reliable sync from this unit (it still clocks reliable to the
Lucid GenX-6) and I've also got a Mytek Stereo 96 DAC that has quit
functioning properly. The s/pdif inputs no longer work, thought the optical
input still works. I'm getting ready to ship them *both* back to
Mytek.........Mytek gear sounds great, but I'm not really impressed with
it's reliability at this point.

Rosendahl makes a clock module that has 12 outputs.

Deej

Deej
"Dimitrios" <musurgio@otenet.gr> wrote in message news:452fb984$1@linux...
>
> Hi,
> Here in Greece there is no such option from any store !
> I see most wordclock generators are 6 output wise !
> What do you do if you need say 8 or nine ?
> Regards,
> Dimitrios
>
> "gene Lennon" <glennon@NOSPmyrealbox.com> wrote:
> >
> >"Dimitrios" <musurgio@otenet.gr> wrote:
> >>
> >>Hi,
> >>Not only DJ but my humble setup is a crazy one too.
> >>For now I connect like this:
> >>Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2
ADAt/tdif
> >>CONVERTER.
> >>Soundscape's wordclock out goes to Mec 1
> >>Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
> >via
> >>wordclock.
> >>Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF
out
> >>and same SS8IO-3 send via wordclock clock to 3rd mec.
> >>With me so far ?
> >>Now the fun part.
> >>First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
> >conncetion.
> >>
> >>1st Mec sends wordclock out to a Behringer ultramizer which reclocks my
> >main
> >>AD converter which has no w/c in out.
> >>2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with
> daisy
> >>chaining
> >>3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
> >>Pulsar Creamware of course is the master device.
> >>ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
> >>Now whose wordclock setup is the crazyest mine or DJ's ?
> >>
> >>Now here is the real question.
> >>If I use a clock generator I will need 8-10 clock outputs to clock
everything.
> >>I don't wanna spend more than 600-700 $ for a complete wordclock setup
> that
> >>will be stable and hassle free and soundwise better than Paris clock.
> >>I thought of the HOSA cheap and a distributor.
> >>I thought of having ADI-PRO8 rme as master and buy just a distributor
like
> >>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
> >>of RME as master.
> >>Anyone to rescue me ?
> >>Regards,
> >>Dimitrios
> >>
> >
> >I also have a fairly complicated digital setup and use a Mytek for master
> >wordclock. I do not run multiple parallel wordclocks and my setup works
> fine
> >with no real wordclock issues. Why don't you borrow a wordclock generator
> >and see if you can just go directly to the Pulsar Creamware card and
switch
> >it to external leaving everything else untouched. I can't guarantee it
but
> >it's worth trying.
> >
> >You are not using the Paris wordclock (which is not terrible). I thought
> >the Creamware clock was considered ok, are you sure you will hear any
improvement
> >short of a very high-end clock? A Big Ben or Mytek would probably make a
> >noticeable improvement. All the more reason to borrow one first.
> >
>
Re: Wordclock help needed !! [message #73972 is a reply to message #73955] Fri, 13 October 2006 10:06 Go to previous messageGo to next message
EK Sound is currently offline  EK Sound   CANADA
Messages: 939
Registered: June 2005
Senior Member
You NEED this:

http://www.rosendahl-studiotechnik.de/nanoclocks.html

David.

Dimitrios wrote:
> Hi,
> Not only DJ but my humble setup is a crazy one too.
> For now I connect like this:
> Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
> CONVERTER.
> Soundscape's wordclock out goes to Mec 1
> Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec via
> wordclock.
> Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF out
> and same SS8IO-3 send via wordclock clock to 3rd mec.
> With me so far ?
> Now the fun part.
> First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF conncetion.
>
> 1st Mec sends wordclock out to a Behringer ultramizer which reclocks my main
> AD converter which has no w/c in out.
> 2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with daisy
> chaining
> 3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
> Pulsar Creamware of course is the master device.
> ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
> Now whose wordclock setup is the crazyest mine or DJ's ?
>
> Now here is the real question.
> If I use a clock generator I will need 8-10 clock outputs to clock everything.
> I don't wanna spend more than 600-700 $ for a complete wordclock setup that
> will be stable and hassle free and soundwise better than Paris clock.
> I thought of the HOSA cheap and a distributor.
> I thought of having ADI-PRO8 rme as master and buy just a distributor like
> Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
> of RME as master.
> Anyone to rescue me ?
> Regards,
> Dimitrios
>
Re: Wordclock help needed !! [message #73977 is a reply to message #73972] Fri, 13 October 2006 10:10 Go to previous messageGo to next message
animix is currently offline  animix   UNITED STATES
Messages: 356
Registered: September 2006
Senior Member
I'm thinking about getting one of these. It looks like the equivalent of
digital Enzyte.


"EK Sound" <askme@nospam.com> wrote in message news:452fc57e$1@linux...
> You NEED this:
>
> http://www.rosendahl-studiotechnik.de/nanoclocks.html
>
> David.
>
> Dimitrios wrote:
> > Hi,
> > Not only DJ but my humble setup is a crazy one too.
> > For now I connect like this:
> > Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2
ADAt/tdif
> > CONVERTER.
> > Soundscape's wordclock out goes to Mec 1
> > Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
via
> > wordclock.
> > Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF
out
> > and same SS8IO-3 send via wordclock clock to 3rd mec.
> > With me so far ?
> > Now the fun part.
> > First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
conncetion.
> >
> > 1st Mec sends wordclock out to a Behringer ultramizer which reclocks my
main
> > AD converter which has no w/c in out.
> > 2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with
daisy
> > chaining
> > 3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
> > Pulsar Creamware of course is the master device.
> > ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
> > Now whose wordclock setup is the crazyest mine or DJ's ?
> >
> > Now here is the real question.
> > If I use a clock generator I will need 8-10 clock outputs to clock
everything.
> > I don't wanna spend more than 600-700 $ for a complete wordclock setup
that
> > will be stable and hassle free and soundwise better than Paris clock.
> > I thought of the HOSA cheap and a distributor.
> > I thought of having ADI-PRO8 rme as master and buy just a distributor
like
> > Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
> > of RME as master.
> > Anyone to rescue me ?
> > Regards,
> > Dimitrios
> >
Re: Wordclock help needed !! [message #73981 is a reply to message #73955] Fri, 13 October 2006 10:51 Go to previous messageGo to next message
gene Lennon[3] is currently offline  gene Lennon[3]
Messages: 40
Registered: June 2006
Member
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>If I use a clock generator I will need 8-10 clock outputs to clock everything.
>I don't wanna spend more than 600-700 $ for a complete wordclock setup that
>will be stable and hassle free and soundwise better than Paris clock.
>I thought of the HOSA cheap and a distributor.
>I thought of having ADI-PRO8 rme as master and buy just a distributor like
>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
>of RME as master.
>Anyone to rescue me ?
>Regards,
>Dimitrios
>


FYI:
What comes out of a wordclock distribution box is not always the same as
what went in.
g
Re: Wordclock help needed !! [message #73983 is a reply to message #73965] Fri, 13 October 2006 11:20 Go to previous messageGo to next message
excelav is currently offline  excelav   
Messages: 2130
Registered: July 2005
Location: Metro Detroit
Senior Member
Hey Dimitrios! This ones got 8+

http://www.lucidaudio.com/index.php?Show=216&Show1=& Show2=406


"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>Here in Greece there is no such option from any store !
>I see most wordclock generators are 6 output wise !
>What do you do if you need say 8 or nine ?
>Regards,
>Dimitrios
>
>"gene Lennon" <glennon@NOSPmyrealbox.com> wrote:
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Hi,
>>>Not only DJ but my humble setup is a crazy one too.
>>>For now I connect like this:
>>>Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
>>>CONVERTER.
>>>Soundscape's wordclock out goes to Mec 1
>>>Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
>>via
>>>wordclock.
>>>Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF
out
>>>and same SS8IO-3 send via wordclock clock to 3rd mec.
>>>With me so far ?
>>>Now the fun part.
>>>First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
>>conncetion.
>>>
>>>1st Mec sends wordclock out to a Behringer ultramizer which reclocks my
>>main
>>>AD converter which has no w/c in out.
>>>2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with
>daisy
>>>chaining
>>>3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
>>>Pulsar Creamware of course is the master device.
>>>ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
>>>Now whose wordclock setup is the crazyest mine or DJ's ?
>>>
>>>Now here is the real question.
>>>If I use a clock generator I will need 8-10 clock outputs to clock everything.
>>>I don't wanna spend more than 600-700 $ for a complete wordclock setup
>that
>>>will be stable and hassle free and soundwise better than Paris clock.
>>>I thought of the HOSA cheap and a distributor.
>>>I thought of having ADI-PRO8 rme as master and buy just a distributor
like
>>>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
>>>of RME as master.
>>>Anyone to rescue me ?
>>>Regards,
>>>Dimitrios
>>>
>>
>>I also have a fairly complicated digital setup and use a Mytek for master
>>wordclock. I do not run multiple parallel wordclocks and my setup works
>fine
>>with no real wordclock issues. Why don’t you borrow a wordclock generator
>>and see if you can just go directly to the Pulsar Creamware card and switch
>>it to external leaving everything else untouched. I can’t guarantee it
but
>>it’s worth trying.
>>
>>You are not using the Paris wordclock (which is not terrible). I thought
>>the Creamware clock was considered ok, are you sure you will hear any improvement
>>short of a very high-end clock? A Big Ben or Mytek would probably make
a
>>noticeable improvement. All the more reason to borrow one first.
>>
>
Re: Wordclock help needed !! [message #73984 is a reply to message #73983] Fri, 13 October 2006 11:27 Go to previous message
excelav is currently offline  excelav   
Messages: 2130
Registered: July 2005
Location: Metro Detroit
Senior Member
"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Hey Dimitrios! This ones got 8+
>
> http://www.lucidaudio.com/index.php?Show=216&Show1=& Show2=406

And it's olny $700.00 US

http://www.musiciansfriend.com/product?sku=188304

I don't think you would need a clock for awhile: )

James
>
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Hi,
>>Here in Greece there is no such option from any store !
>>I see most wordclock generators are 6 output wise !
>>What do you do if you need say 8 or nine ?
>>Regards,
>>Dimitrios
>>
>>"gene Lennon" <glennon@NOSPmyrealbox.com> wrote:
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>
>>>>Hi,
>>>>Not only DJ but my humble setup is a crazy one too.
>>>>For now I connect like this:
>>>>Creamware Pulsar card adat optical out feeding Soundscape SS8IO-2 ADAt/tdif
>>>>CONVERTER.
>>>>Soundscape's wordclock out goes to Mec 1
>>>>Creamware Pulsar Adat out feeds another SS8IO-2 which feeds another mec
>>>via
>>>>wordclock.
>>>>Soundscape SS8IO-3 (8 AD/DA converter) gets clock from SS8IO-2's TDIF
>out
>>>>and same SS8IO-3 send via wordclock clock to 3rd mec.
>>>>With me so far ?
>>>>Now the fun part.
>>>>First SS8IO-2 sends clock to ADI-PRO8 (used for main DA) via their TDIF
>>>conncetion.
>>>>
>>>>1st Mec sends wordclock out to a Behringer ultramizer which reclocks
my
>>>main
>>>>AD converter which has no w/c in out.
>>>>2nd Mec sends w/c to a DBX 376 preamp and from there to a DBX 386 with
>>daisy
>>>>chaining
>>>>3rd Mec send wordclock to Behringer ADA-8000 8 channel converter.
>>>>Pulsar Creamware of course is the master device.
>>>>ADAT sync out sends clock to Lexicon core 32 reverb card (thanks DJ)
>>>>Now whose wordclock setup is the crazyest mine or DJ's ?
>>>>
>>>>Now here is the real question.
>>>>If I use a clock generator I will need 8-10 clock outputs to clock everything.
>>>>I don't wanna spend more than 600-700 $ for a complete wordclock setup
>>that
>>>>will be stable and hassle free and soundwise better than Paris clock.
>>>>I thought of the HOSA cheap and a distributor.
>>>>I thought of having ADI-PRO8 rme as master and buy just a distributor
>like
>>>>Drawmer 20 out (!!!) D-clock device whic sells for 700 $ but I am afraid
>>>>of RME as master.
>>>>Anyone to rescue me ?
>>>>Regards,
>>>>Dimitrios
>>>>
>>>
>>>I also have a fairly complicated digital setup and use a Mytek for master
>>>wordclock. I do not run multiple parallel wordclocks and my setup works
>>fine
>>>with no real wordclock issues. Why don’t you borrow a wordclock generator
>>>and see if you can just go directly to the Pulsar Creamware card and switch
>>>it to external leaving everything else untouched. I can’t guarantee it
>but
>>>it’s worth trying.
>>>
>>>You are not using the Paris wordclock (which is not terrible). I thought
>>>the Creamware clock was considered ok, are you sure you will hear any
improvement
>>>short of a very high-end clock? A Big Ben or Mytek would probably make
>a
>>>noticeable improvement. All the more reason to borrow one first.
>>>
>>
>
Previous Topic: Paris on XP, mobo and CPU?
Next Topic: for dj
Goto Forum:
  


Current Time: Wed Dec 11 23:14:48 PST 2024

Total time taken to generate the page: 0.01612 seconds