The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Need input on Driver Release
Need input on Driver Release [message #107613] Fri, 19 April 2013 12:12 Go to next message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
Hi All,

It's going to take more time to get a pace free version of PARIS 3.0 that I can release.

My fallback plan for this weekend had been to release the standard PACE version of PARIS 3.0 if I couldn't get permission from ID to release a PACE free version.

What I discovered today is that the PACE version of PARIS 3.0 will not run at all in Windows 7 64, even with the latest PACE drivers installed. And, today I learned that approval for a PACE free version of PARIS 3.0 is going to take more time.

Should I release the driver with a PACE PARIS 3.0 that will not run? PARIS version 2 will still work.

Or, should I wait until everything is in place?

I'm feeling pretty low about this, but there is nothing I can do. Thanks to the crappy Conservative government in Canada, I could be up for a $1,000,000 fine and 5 years in jail if I break the lock and it is deemed to be for commercial purposes.

Even if it wasn't deemed commercial, it would destroy my relationship with ID, and I value that highly.

So, I just can't do it.

Having said that, in Canada at least, an individual breaking a digital lock is only on the hook for the damages that a company can show. And, since PARIS 3.0 is not for sale, those would be zero.

Let me know what you think I should do.

Mike







Re: Need input on Driver Release [message #107614 is a reply to message #107613] Fri, 19 April 2013 12:39 Go to previous messageGo to next message
Stephen Stecyk is currently offline  Stephen Stecyk   UNITED STATES
Messages: 35
Registered: February 2007
Member
Hey Mike

I'd suggest waiting, and doing things on the level. You don't want to mess up your relationship with ID, especially after all your hard work. It sucks, but it'll be worth the wait. Smile

Thanks for everything, and I look forward to spending some money on new drivers. Very Happy

Stephen Stecyk
Re: Need input on Driver Release [message #107615 is a reply to message #107614] Fri, 19 April 2013 12:54 Go to previous messageGo to next message
Will The Weirdo is currently offline  Will The Weirdo   MEXICO
Messages: 190
Registered: December 2009
Location: On The Lake
Senior Member
Wait Mike, don't burn any bridges or put yourself in a legal bind that will cause your family problems.
I would be patient with ID and get their full permission.
Re: Need input on Driver Release [message #107616 is a reply to message #107615] Fri, 19 April 2013 14:30 Go to previous messageGo to next message
Ted Gerber is currently offline  Ted Gerber   CANADA
Messages: 705
Registered: January 2009
Senior Member
I agree -

Wait and do things in a way that only generates good will...

Best

Ted
Re: Need input on Driver Release [message #107617 is a reply to message #107616] Fri, 19 April 2013 15:04 Go to previous messageGo to next message
laurent is currently offline  laurent   FRANCE
Messages: 39
Registered: February 2009
Member
if there is no solution,is that there are no problems there is always a solution
just time and take time

laurent
Re: Need input on Driver Release [message #107618 is a reply to message #107617] Fri, 19 April 2013 19:35 Go to previous messageGo to next message
Wayne is currently offline  Wayne   UNITED STATES
Messages: 206
Registered: July 2008
Location: Las Vegas
Senior Member
Wait!!! Jail and fines are totally out of bounds.

I am so please with how far you've come. Don't jepardize your efforts, contacts and family. You come first.

Wayne
Re: Need input on Driver Release [message #107619 is a reply to message #107613] Fri, 19 April 2013 19:48 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
You should absolutely wait for permission before releasing a de-paced version. Anything else would be a completely unacceptable risk for you - and for us, since you're our only developer!

But maybe release the installer that includes the PACE-protected version of the app so we can thank you with a pre-purchase. You could incllude a note that reminds purchasers that it's just a pre-purchase, and that it is for the moment illegal to replace the installed paris.exe with a de-paced one.


"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

[Updated on: Fri, 19 April 2013 19:52]

Report message to a moderator

Re: Need input on Driver Release [message #107620 is a reply to message #107619] Sat, 20 April 2013 05:19 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
Thanks so much for the supportive comments, everyone. I was pretty upset yesterday. My daughter actually slept in this morning, and I feel a lot better after a good sleep.

I discovered that the 32 bit MTC option isn't working in PARIS 2.0. I'm going to try to get that sorted, and when that is fixed, I'll release the installer with PARIS 2.1 and the non-functioning PACE PARIS 3.0. If I receive permission to do better before then, I will.

This has definitely got me energized to first get the ASIO driver done, and then work on a re-imagined custom app for the PARIS hardware.

All the best,

Mike
Re: Need input on Driver Release [message #107621 is a reply to message #107619] Sat, 20 April 2013 06:15 Go to previous messageGo to next message
Oui_Oui is currently offline  Oui_Oui   UNITED STATES
Messages: 51
Registered: December 2009
Member
Mike,
We can all wait. Paris 2.1 with 64 bit windows 7 machine is a million times better than what I had going before.
Thanks
Ron
Re: Need input on Driver Release [message #107622 is a reply to message #107621] Sat, 20 April 2013 06:21 Go to previous messageGo to next message
dnafe is currently offline  dnafe   CANADA
Messages: 390
Registered: February 2009
Senior Member
Maybe ID will authorize this PACE free version as their official update.

Wink
Re: Need input on Driver Release [message #107626 is a reply to message #107613] Thu, 25 April 2013 08:13 Go to previous messageGo to next message
ronj_91602 is currently offline  ronj_91602   UNITED STATES
Messages: 64
Registered: March 2010
Location: Fort Worth Texas
Member
Wait by all means. Does your version work on 32 bit Windows 7? If so how do I go about placing Windows 7 on my computer to make it compatible with Paris? Or should I wait for the 64 bit?
Re: Need input on Driver Release [message #107627 is a reply to message #107626] Thu, 25 April 2013 13:14 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
I just finished getting the installer to work on Windows XP. It requires a restart, but it works. On windows 7 64, no restart is required.

I've also been digging into the issue 32 bit MTC not working in PARIS 2.1. I've installed PARIS 2.1 from the original installer and installed the version of the PThru.drv that came with the original XP driver, and it doesn't work on my system. Could it have really been broken for all this time, and no one noticed? Maybe it doesn't matter much.

In any case, it's not really well implemented anyway. 32 bit MTC is designed to get a sample start value from the PARIS app, and then it uses built in Windows timers to keep time. So, it's in sync at start time, and then it freewheels.

I could write proper MTC generation into the PSCL, and it could be turned on and off by a control panel if there is interest in synching a MIDI app to PARIS 2.1. If not, I won't bother.

I'm completely tied up until Sunday (my wife is in the Peterborough Symphony, and it is concert week). I think I'll release the installer then. I want to add the registry entries for the ASIO driver and test a bit more.

The installer is a single executable that will allow:

- The easy install of PARIS 2.1 and 3.0 on both 32 bit and 64 bit Windows, with no need to run additional updates.

- the east install of updated scherzo and PSCL drivers on 32 bit and 64 bit windows.

- it will install the PARIS MIDI driver on 32 and 64 bit Windows.

Know issues:

- to run PARIS 3.0 on a 32 bit windows, the PACE driver will need to be installed separately.

- though the installer will install PARIS 3.0 on 64 bit Windows, the PACE copy protection did not work for me. I'll leave the installation in just in case a future update of the PACE driver resolves the compatibility issue or someone else finds a way to get the PARIS 3.0 app to work with the current PACE driver.

If ID provides me with a PACE free version of PARIS 3.0, I'll update the installer.

Does this sound like a good way to proceed?

Let me know what you think.

All the best,

Mike





Re: Need input on Driver Release [message #107628 is a reply to message #107627] Thu, 25 April 2013 14:01 Go to previous messageGo to next message
ronj_91602 is currently offline  ronj_91602   UNITED STATES
Messages: 64
Registered: March 2010
Location: Fort Worth Texas
Member
Sounds great to me. That would get us one step closer and would update the 32 bit XP that I think most are working with at this time and would let Paris upgrade to Windows 7. My thoughts LOL!!! Keep us alive this is the most analog system!!!!! Thank you Mike for everything.....Ron
Re: Need input on Driver Release [message #107629 is a reply to message #107613] Thu, 25 April 2013 16:53 Go to previous messageGo to next message
Oui_Oui is currently offline  Oui_Oui   UNITED STATES
Messages: 51
Registered: December 2009
Member
Mike,
Sounds good to proceed.
Thanks Mike
Re: Need input on Driver Release [message #107630 is a reply to message #107629] Fri, 26 April 2013 09:58 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi Mike,
Can we buy just the new ASIO driver for XP at least ??
I would want for now to have my Paris hardware work with Cubase 5 under XP !
Maye sounds dum but is ASIO all needed ?
If so is it ready ?
Thanks a million.
Regards,
Dimitrios
Re: Need input on Driver Release [message #107631 is a reply to message #107630] Fri, 26 April 2013 10:23 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
Hi Dimitrios,

The new ASIO driver is not ready, but I'm going to be getting back on it this weekend. I'm very excited to get back to working on it. I have big plans for the code that will come out of it.

All the best,

Mike
Re: Need input on Driver Release [message #107633 is a reply to message #107613] Sat, 27 April 2013 08:48 Go to previous messageGo to next message
Stephen Stecyk is currently offline  Stephen Stecyk   UNITED STATES
Messages: 35
Registered: February 2007
Member
If ID refuses to offer a De-PACED version, I wonder if ID would let you "fix" the Paris 3.0 issue with Windows 7 64 bit?
Re: Need input on Driver Release [message #107634 is a reply to message #107633] Sat, 27 April 2013 09:58 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
ID was initially very helpful and supportive. Edmund provided me with a new PARIS.exe that was supposed to be PACE free, but it didn't work. He also provided the headers for the PARIS effects library, which are going to be really, really helpful.

At some point, and I don't know why, I stopped getting responses to my emails. After I called a couple of times and sent a further email asking specifically if I could remove PACE from the executable myself (to save them time given that they were busy), I got back a brief message that said they were busy and unable to help me right now. That's all I know.

I got the ASIO driver registry entries add to the installer this morning, and I've been back working on the ASIO driver. I'm going to give a thorough last look over the installer today and release it tomorrow. It's very cool that it runs on either 32 bit and 64 bit Windows and just works.

All the best,

Mike
Re: Need input on Driver Release [message #107635 is a reply to message #107634] Sun, 28 April 2013 05:45 Go to previous messageGo to next message
dnafe is currently offline  dnafe   CANADA
Messages: 390
Registered: February 2009
Senior Member
My initial thought was the fact that Edmund sent you a PACE free version would seem to indicate he's okay with the idea so I'd move forward with your plans

Of course that might be wishful thinking.
Re: Need input on Driver Release [message #107636 is a reply to message #107635] Sun, 28 April 2013 06:56 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
That's what I thought, too. But, I wanted to be completely covered in case I was wrong, and I couldn't get him to respond to my request, one way or another.
Re: Need input on Driver Release [message #107643 is a reply to message #107636] Sun, 28 April 2013 14:09 Go to previous messageGo to next message
dnafe is currently offline  dnafe   CANADA
Messages: 390
Registered: February 2009
Senior Member
I'd keep working on a PACE free version and continue trying to get a reply from Edmund...bottom line if you have it finished and tell him you're about to release it I bet you hear back from him ASAP.

Re: Need input on Driver Release [message #107645 is a reply to message #107643] Sun, 28 April 2013 14:30 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
Heads up folks - the driver is RELEASED! See sticky post here.

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
Re: Need input on Driver Release [message #107646 is a reply to message #107643] Sun, 28 April 2013 15:08 Go to previous message
mikeaudet   CANADA
Messages: 476
Registered: February 2009
Location: Canada
Senior Member
Hi Don,

I started asking Edmund if I could remove pace myself about a month ago. A week ago, I got a response basically telling me to stop bugging him. I'm not sure what is going on at ID, but I think something has Edmund overwhelmed, and I'm not sure when that will change. I'm going to soldier on with the ASIO driver. If I do get permission, I certainly will do it.

All the best,

Mike
Previous Topic: Some real 64 bit progress!!!
Next Topic: New Paris hardware project
Goto Forum:
  


Current Time: Tue Nov 26 21:48:41 PST 2024

Total time taken to generate the page: 0.06354 seconds