Home » The PARIS Forums » PARIS: Main » Why will Paris 3 not render EDS effects
|
|
|
|
|
Re: Why will Paris 3 not render EDS effects [message #102083 is a reply to message #102077] |
Tue, 13 January 2009 14:59 |
EK Sound
Messages: 939 Registered: June 2005
|
Senior Member |
|
|
If you have an adat card in your system, you can do a render using aux
sends to route to adat outputs. Loop the adat optical out to in, then
route the adat inputs to free channels and record the results. It's the
same as the SPDIF loop thing, but 8 channels at a time (or 16 if you
have 2 adat cards, one in each of two MEC's). One cavet... the loop on
adat will be 20bit resolution only.
David.
"Gantt Kushner" ganttmanncomcast.net wrote:
> I've never tried this, but what if you go to the patchbay and route the insert
> out of the channel you want to render to the input of another channel, set
> up your EDS FX and then, in the last open EDS slot set it to "external".
> Do you think you'd be able to record the EDS effected output of that track
> to the new track? Still would have to be real time, though...
>
> Gantt
>
> "Erling" <erling.lovik@lyse.net> wrote:
>> There is a way to render EDS effects but it's a harder way. Make the choice
>
>> of wich file you will render with just EDS, pan it to right or left and
> mute
>> all other files. Do a stereo mixdown and import the file back to the
>> project.
>>
>> Erling
>>
>> "Rich S." <studiodog_99@(Y)ahoo.com> skrev i melding
>> news:496b6f2d$1@linux...
>>> Why can we only render Native effects? It would be great to render eds
>
>>> effects
>>> - is there a way to do this?
>>>
>>> Thanks!!!!!
>>
>>
>
|
|
|
Re: Why will Paris 3 not render EDS effects [message #102086 is a reply to message #102081] |
Tue, 13 January 2009 19:55 |
|
I know that you can route the stereo output from the master module to two
channel inputs. I've run simultaneous ruff mixes that way. Why, then, couldn't
you run an EDS effect output to a channel input? I'm, gonna have to give
it a try just to see!
Gantt
"Erling" <erling.lovik@lyse.net> wrote:
>I don't know Gantt. I knew stereo mixdown was the only way to render with
>earlier Paris versions, as far as I know, so I believed it was the same
>route in version 3 with EDS.
>
>Erling
>
><Gantt Kushner ganttmanncomcast.net> skrev i melding
>news:496ccc20$1@linux...
>>
>> I've never tried this, but what if you go to the patchbay and route the
>> insert
>> out of the channel you want to render to the input of another channel,
set
>> up your EDS FX and then, in the last open EDS slot set it to "external".
>> Do you think you'd be able to record the EDS effected output of that track
>> to the new track? Still would have to be real time, though...
>>
>> Gantt
>>
>> "Erling" <erling.lovik@lyse.net> wrote:
>>>There is a way to render EDS effects but it's a harder way. Make the
>>>choice
>>
>>>of wich file you will render with just EDS, pan it to right or left and
>> mute
>>>all other files. Do a stereo mixdown and import the file back to the
>>>project.
>>>
>>>Erling
>>>
>>>"Rich S." <studiodog_99@(Y)ahoo.com> skrev i melding
>>>news:496b6f2d$1@linux...
>>>>
>>>> Why can we only render Native effects? It would be great to render
eds
>>
>>>> effects
>>>> - is there a way to do this?
>>>>
>>>> Thanks!!!!!
>>>
>>>
>>>
>>
>
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
Re: Why will Paris 3 not render EDS effects [message #102087 is a reply to message #102086] |
Tue, 13 January 2009 22:06 |
Rod Lincoln
Messages: 883 Registered: September 2005
|
Senior Member |
|
|
You can totally do this. but you would take an converter hit, unless you did
it through the spdif. I'ts pretty much the Brian T method of rendering autotune.
You could also use adat. Your limiting to 20 bits, but heck, a lot of "24"
bit audio is really only 20 usable bits anyway.
Rod
"Gantt Kushner" <ganttmann@comcast.net> wrote:
>
>I know that you can route the stereo output from the master module to two
>channel inputs. I've run simultaneous ruff mixes that way. Why, then, couldn't
>you run an EDS effect output to a channel input? I'm, gonna have to give
>it a try just to see!
>
>Gantt
>
>"Erling" <erling.lovik@lyse.net> wrote:
>>I don't know Gantt. I knew stereo mixdown was the only way to render with
>
>>earlier Paris versions, as far as I know, so I believed it was the same
>
>>route in version 3 with EDS.
>>
>>Erling
>>
>><Gantt Kushner ganttmanncomcast.net> skrev i melding
>>news:496ccc20$1@linux...
>>>
>>> I've never tried this, but what if you go to the patchbay and route the
>
>>> insert
>>> out of the channel you want to render to the input of another channel,
>set
>>> up your EDS FX and then, in the last open EDS slot set it to "external".
>>> Do you think you'd be able to record the EDS effected output of that
track
>>> to the new track? Still would have to be real time, though...
>>>
>>> Gantt
>>>
>>> "Erling" <erling.lovik@lyse.net> wrote:
>>>>There is a way to render EDS effects but it's a harder way. Make the
>>>>choice
>>>
>>>>of wich file you will render with just EDS, pan it to right or left and
>>> mute
>>>>all other files. Do a stereo mixdown and import the file back to the
>>>>project.
>>>>
>>>>Erling
>>>>
>>>>"Rich S." <studiodog_99@(Y)ahoo.com> skrev i melding
>>>>news:496b6f2d$1@linux...
>>>>>
>>>>> Why can we only render Native effects? It would be great to render
>eds
>>>
>>>>> effects
>>>>> - is there a way to do this?
>>>>>
>>>>> Thanks!!!!!
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>
|
|
|
Re: Why will Paris 3 not render EDS effects [message #102226 is a reply to message #102087] |
Tue, 20 January 2009 12:35 |
Riich S
Messages: 3 Registered: January 2009
|
Junior Member |
|
|
Great idea's - thanks!
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>You can totally do this. but you would take an converter hit, unless you
did
>it through the spdif. I'ts pretty much the Brian T method of rendering autotune.
>You could also use adat. Your limiting to 20 bits, but heck, a lot of "24"
>bit audio is really only 20 usable bits anyway.
>Rod
>"Gantt Kushner" <ganttmann@comcast.net> wrote:
>>
>>I know that you can route the stereo output from the master module to two
>>channel inputs. I've run simultaneous ruff mixes that way. Why, then,
couldn't
>>you run an EDS effect output to a channel input? I'm, gonna have to give
>>it a try just to see!
>>
>>Gantt
>>
>>"Erling" <erling.lovik@lyse.net> wrote:
>>>I don't know Gantt. I knew stereo mixdown was the only way to render with
>>
>>>earlier Paris versions, as far as I know, so I believed it was the same
>>
>>>route in version 3 with EDS.
>>>
>>>Erling
>>>
>>><Gantt Kushner ganttmanncomcast.net> skrev i melding
>>>news:496ccc20$1@linux...
>>>>
>>>> I've never tried this, but what if you go to the patchbay and route
the
>>
>>>> insert
>>>> out of the channel you want to render to the input of another channel,
>>set
>>>> up your EDS FX and then, in the last open EDS slot set it to "external".
>>>> Do you think you'd be able to record the EDS effected output of that
>track
>>>> to the new track? Still would have to be real time, though...
>>>>
>>>> Gantt
>>>>
>>>> "Erling" <erling.lovik@lyse.net> wrote:
>>>>>There is a way to render EDS effects but it's a harder way. Make the
>
>>>>>choice
>>>>
>>>>>of wich file you will render with just EDS, pan it to right or left
and
>>>> mute
>>>>>all other files. Do a stereo mixdown and import the file back to the
>>>>>project.
>>>>>
>>>>>Erling
>>>>>
>>>>>"Rich S." <studiodog_99@(Y)ahoo.com> skrev i melding
>>>>>news:496b6f2d$1@linux...
>>>>>>
>>>>>> Why can we only render Native effects? It would be great to render
>>eds
>>>>
>>>>>> effects
>>>>>> - is there a way to do this?
>>>>>>
>>>>>> Thanks!!!!!
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>
>
|
|
|
Goto Forum:
Current Time: Sun Dec 29 08:00:34 PST 2024
Total time taken to generate the page: 0.01121 seconds
|