The PARIS Forums: PARIS: Main » WordClock ....How would i hook these devices?

Home » The PARIS Forums » PARIS: Main » WordClock ....How would i hook these devices?

Show: Today's Messages :: Polls :: Message Navigator

WordClock ....How would i hook these devices? [message #65249]

Wed, 08 March 2006 09:07

Kip Sonnier

Messages: 32
Registered: December 2005

Member

WordClock ....How would i hook these devices?

2 Mecs on pc #2
1 audiofire on pc #1
1 Layla24/96 on pc #1

I have all the cables and t-adapters and terminator,all 75ohm

WinXP
3 eds1000

Report message to a moderator

Re: WordClock ....How would i hook these devices? [message #65250 is a reply to message #65249]

Wed, 08 March 2006 08:39

EK Sound

Messages: 939
Registered: June 2005

Senior Member

With an external WC generator and cables running directly to each
piece... seriously, it would be the best solution. T-adapters are not
reliable.

David.

Kip Sonnier wrote:
> WordClock ....How would i hook these devices?
>
> 2 Mecs on pc #2
> 1 audiofire on pc #1
> 1 Layla24/96 on pc #1
>
> I have all the cables and t-adapters and terminator,all 75ohm
>
> WinXP
> 3 eds1000

Report message to a moderator

Re: WordClock ....How would i hook these devices? [message #65252 is a reply to message #65250]

Wed, 08 March 2006 08:57

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

Dave is right about this. No daisy chaining. If you don't have enough WC
outputs, get yourself a Lucid CLKX6.

Deej

"EK Sound" <askme@nospam.com> wrote in message news:440f09e6@linux...
> With an external WC generator and cables running directly to each
> piece... seriously, it would be the best solution. T-adapters are not
> reliable.
>
> David.
>
> Kip Sonnier wrote:
> > WordClock ....How would i hook these devices?
> >
> > 2 Mecs on pc #2
> > 1 audiofire on pc #1
> > 1 Layla24/96 on pc #1
> >
> > I have all the cables and t-adapters and terminator,all 75ohm
> >
> > WinXP
> > 3 eds1000

Report message to a moderator

Re: WordClock ....How would i hook these devices? [message #65259 is a reply to message #65249]

Wed, 08 March 2006 18:24

Suad

Messages: 62
Registered: October 2005

Member

I have a different story...

Connect an T adapter to second MEC (slave) WC input,
another T adapter to audiofire WC input.

Without T adapters on first and last device.

Now connect wordclock from MEC A (master) WC output thru
T adapter on the second MEC then thru T adapter of the audiofire
and end up in WC input of layla.

You can switch places of layla and audiofire if needed for shorter
cable runs... Btw, as the chain is shorter - the beter!

At first, try without any termination.
Put paris to "internal sync" and layla and audiofire to
slave/external/wordclock. (very important!)

I have had very similar setup for years without any digital sync problems.
Infact, my setup was a little more complicated...

It was 2xMEC + 2xRMEhdsp9652 + TC electronisc M3000.
All in wordclock chain and all conected digitally and perfectly
synced + adat sync to cubase. Without termination.
Complete chain was about 6 meters long.

Now I have 4xEDS and 4xMEC, and that is a totaly different story.... ;-)

If you consider some sync problems and clicking, try to terminate
first and last device adding T adapters and 75ohm terminators...

The fact is that it worked for me for years!
And remember, it's crucial that everything but your master MEC is
set to WC slave.

....and use quality cables.

Cheers.

Suad

"Kip Sonnier" <fender36@cox.net> wrote in message news:440f014c$1@linux...
>
> WordClock ....How would i hook these devices?
>
> 2 Mecs on pc #2
> 1 audiofire on pc #1
> 1 Layla24/96 on pc #1
>
> I have all the cables and t-adapters and terminator,all 75ohm
>
> WinXP
> 3 eds1000

Report message to a moderator

Previous Topic:	Mastering a jazz trio-Anyone use Elemental Audio Firium for mastering?or should I stick with UA prec
Next Topic:	Probably old news to you guys, but I finally figured out how to save after an Unhandled Exception.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Mar 04 00:15:59 PST 2025

Total time taken to generate the page: 0.04880 seconds