Home » The PARIS Forums » PARIS: Main » XP problems with 1 and 2 eds cards; Error 2/2; FX presets not saving
|
|
 Re: XP problems with 1 and 2 eds cards; Error 2/2; FX presets not saving [message #56941 is a reply to message #56894] |
Tue, 16 August 2005 06:45   |
justcron
Messages: 330
Registered: May 2006
|
Senior Member |
|
|
ate, realistic feeling to this as it was tracked live in
>my
>>studio with 10 open mics.
>>
>>I'd be glad to e-mail it to those here who would be willing to critique
>it.
>>
>>TIA for the enlightenment.
>>
>>;o)
>>
>>Deej
>>
>>Deej
>>
>>
>DJ,this sounds somewhat familiar to me;)Seems like some of the
issues I was having awhile back that you helped me on.Just like
you I wasn't hearing much,but the waveforms looked a little
crazy;don't think I was getting too many errors though.
Try pulling down the global submix faders like someone said.That
helped my situation.
Pete
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>I've been playing around with a couple of these songs I'm mixing. 10 tracks
>on one submix. I'm applying compression in SX, then lightpiping to Paris,
>ap[plying reverb and panning and bouncing to disk. I'm mixing hot, the
>faders are often kissing the 0dBfs limit on the individual Paris channels
>and the submix fader is redlined almost constantly. The Global fader is
at
>0dBfs and I've got NoLimit set with a threshold of -2 , limiting at -0.9.
>
>This mix sounds very big and I hear no distortion at all. It's really
>reminiscent of analog tape, no harshness/brittle sound. It may be a bit
much
>for a Bluegrass mix but it held together well and there is plenty of
>separation.
>
>When I open it in Wavelab, it's obvious where the NoLimit was doing it's
>thing. Certain peaks were squared off a bit.........nothing resembling a
>square wave situation, just a number of spots where it is visually apparent.
>
>When I run an analysis of the mix file in Wavelab, I'm getting huge amounts
>of errors, like 1000 errors in the first 6 seconds.
>
>I wonder what's up. If NoLimit is doing something to this file which would
>preclude it being dupliccated in reproduction plant, then I'm going to have
>to be much more careful. I'm also wondeering if lightpiping this many tracks
>from SX to Paris with a dither lgo applied to each track to avoid
>quantization errors is perhaps causing errors somehow. I have listened very
>closely and I hear absolutely no audible problems, other than the sort of
>smooth glue that is the *secret sauce* that mixing hot on this system can
>impart to the tracks.
>
>While Zep 1 has great depth, it does not have any of the imaging found
on The Woman In Me.
Cujo wrote:
> I may sound like a luddite(iI am occused of this often by friends) here,
> but old Glynn Johns for instance had a left right and center pan control,
> sounds like Ememrick did too. annd some tape delays, springs and plates.
> Ok, they probably had some real chambers. I still think Zep 1 and Who's Next
> sound amazing. and have "depth"
> Of course the general public probably thinks they sound old..so what the
> hell do I know?
|
|
|
|
| Re: XP problems with 1 and 2 eds cards; Error 2/2; FX presets not saving [message #56952 is a reply to message #56941] |
Tue, 16 August 2005 09:50 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
gt;>
>> Does anyone know if this board would work with Paris?
>>
>> All my experience has been with AMD processors and Paris, so this is
>> new territory.
>>
>> Any thoughts are appreciated.
>>
>> Cheers,
>>
>> TC
>
>I am having a hard time with my Insurance Agent getting insurance to cover
my studio
equipment. I am not actually running it as a business right now so I wasn't
going to
insure it as such...problem is they don't have a policy that will cover over
$1000 on
electronics. I know it sounds outrageous to me too....
There is also no way to upgrade that policy to cover the dollar value
....$50,000..it's more like
$40,000 but I didn't think it would hurt to have over coverage for growth.
Of course that is when everything was brand new...nowadays it is probably
worth $15,000.
Anyway...who are you guys using for this?
I wonder if ASCAP has something available????
Should I go ahead and insure it as a business...benefits???non-benefits????
Thanks,There used to be a website that had "current" resale value for just about
any pro audio gear...
Anyone know it?www.ebay.com
;o)
"Brandon" <brandon_goodwin@REMOVETHISsbcglobal.net> wrote in message
news:43026d39$1@linux...
> There used to be a website that had "current" resale value for just about
> any pro audio gear...
> Anyone know it?
>
>
>David, any idea of the cost on this unit. I went to the website, but unless
I overlooked it, there was no reference to cost.
Thanks, Tyronehomie can you fix your clock pleeeeze :)
"Brandon" <brandon_goodwin@REMOVETHISsbcglobal.net> wrote in message
news:43026d39$1@linux...
> There used to be a website that had "current" resale value for just about
> any pro audio gear...
> Anyone know it?
>
>
>prepal.com
"justcron" <justcron@hydrorecords.compound> wrote in message
news:43026eb7@linux...
> homie can you fix your clock pleeeeze :)
>
> "Brandon" <brandon_goodwin@REMOVETHISsbcglobal.net> wrote in message
> news:43026d39$1@linux...
>> There used to be a website that had "current" resale value for just about
>> any pro audio gear...
>> Anyone know it?
>>
>>
>>
>
>Pentium processors, probably give more hassal free service than the
equivalent AMD version with Paris.
AMD work but there seems to be more tweeking involved to get a stable
system.
--
Martin Harrington
www.lendanear-sound.com
"TC" <tc@spammetodeathyoubastards.org> wrote in message
news:43023c0d$1@linux...
> Hi Chris,
>
> Thanks for the link. So I assume that I should stay away from
> Pentium processors with Paris then? The reason I was looking
> at that asus one was that my dealer down the street carries it,
> and gave me a good price on a customized system. I'm not going
> to be able to fit that many EDS cards in my tower so I thought I
> may as well go smaller and use the magma.
>
> Cheers,
>
> TC
>
> Chris Ludwig wrote:
>> Hi TC,
>> Not sure what your planning for this but if you having some strange urge
>> to use a small form factor PC with Paris then I would say the Shuttle
>> boxes are a far better option. They actually make a great AMD Nforce 3
>> chipset 939 based system.
>> http://global.shuttle.com/Product/Barebone/SN95G5%20V3.asp
>>
>> Chris
>>
>>
>> TC wrote:
>>
>>>
>>> I am thinking of putting together a new system with a magma chassis for
>>> Paris, and am looking at the following:
>>>
>>> http://usa.asus.com/prog/spec.asp?m=S-presso&langs=09
>>>
>>> Does anyone know if this board would work with Paris?
>>>
>>> All my experience has been with AMD processors and Paris, so this is new
>>> territory.
>>>
>>> Any thoughts are appreciated.
>>>
>>> Cheers,
>>>
>>> TC
>>Really? I thought the opposite was true by what most people use here?
Or am I thinking of more like 3 years ago?
Cheers,
TC
Martin Harrington wrote:
> Pentium processors, probably give more hassal free service than the
> equivalent AMD version with Paris.
> AMD work but there seems to be more tweeking involved t
|
|
|
|
| Re: XP problems with 1 and 2 eds cards; Error 2/2; FX presets not saving [message #57071 is a reply to message #56952] |
Fri, 19 August 2005 08:50 |
Dan B
Messages: 54
Registered: June 2005
|
Member |
|
|
r />
>>Cheers,
>>
>>db
>>
>>"db" <daniel_burneNOSPAM@yahoo.com> wrote:
>>
>>>Hi all,
>>>
>>>As promised I've put together a PPJ of collected Paris FX presets - unfortuantely
>>>I can't attach it as it's too large (c.1.7Meg) - I'll happily e-mail it
>>
>>though
>>
>>>if you drop me an e-mail. I'll also send a copy to Mike Audet as he's got
>>>some webspace for this purpose.
>>>
>>>Most of these have been compiled from other users or the newsgroup or the
>>>FX preset updates. There are settings for the Comp, NoLimit, Plate and
>
> Room
>
>>>Reverbs, Chorus, and Tap Delay.
>>>
>>>If anyone has any to add, let us all know. You might also want to contact
>>>Mike Audet (mike@mikeFSPAM!audet.com) and myself, as Mike has some webspace
>>>(www.mikeaudet.com/paris) set up for Paris FX Presets.
>>>
>>>Enjoy.
>>>
>>>Dan B / db
>>
>Enjoy courtesy of Dan B
http://people.musc.edu/~bercikj/All Presets.ppjtaint a workin for me sir. gets the 404 not found on this server.
thanky
On Fri, 19 Aug 2005 14:25:02 -0400, John <no@no.com> wrote:
>Enjoy courtesy of Dan B
>
>http://people.musc.edu/~bercikj/All Presets.ppjI'm going to be tracking some Roland electronic drums with the intention of
replacing some or all of the sounds with samples via Drumagog. How much
CPU does this app use per track?
Thankstry this please
http://people.musc.edu/~bercikj/all_presets.ppjForgive my ignorance, but I have never attempted this.
I see on the Inserts on the Global Master there is an EXTERNAL
option. Yet when I look in the Patch Bay I see no L&R on the INSERT
BLOCK.
How is a loop formed with an external FX on the Global Master?
ThanksJohn <no@no.com> wrote:
>try this please
>
>http://people.musc.edu/~bercikj/all_presets.ppj
That works!
thanks!Brandon,
On the inserts for your first submix (usually Submix A)there should be a
left and right i/o. Route those from and to your interface (442,MEC,
etc.) and that will function as your external effects loop. Not in
front of my system at present, but I believe the L & R only exist on the
inserts of the first submix .
JH
brandon wrote:
> Forgive my ignorance, but I have never attempted this.
> I see on the Inserts on the Global Master there is an EXTERNAL
> option. Yet when I look in the Patch Bay I see no L&R on the INSERT
> BLOCK.
> How is a loop formed with an external FX on the Global Master?
>
>
>
> ThanksThis is a multi-part message in MIME format.
------=_NextPart_000_00C5_01C5A4DF.83EBFB30
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
JH,
They exist on others but don't do squat as far as I can tell.
Wouldn't have been great to insert effects across the submixes
this way?!!!
Tom
"Jeff hoover" <jkhoover@excite.com> wrote in message =
news:43064284@linux...
Brandon,
On the inserts for your first submix (usually Submix A)there should be =
a=20
left and right i/o. Route those from and to your interface (442,MEC,=20
etc.) and that will function as your external effects loop. Not in=20
front of my system at present, but I believe the L & R only exist on =
the=20
inserts of the first submix .
JH
brandon wrote:
> Forgive my ignorance, but I have never attempted this.
> I see on the Inserts on the Global Master there is an EXTERNAL
> option. Yet when I look in the Patch Bay I see no L&R on the INSERT
> BLOCK.
> How is a loop formed with an external FX on the Global Master?
>=20
>=20
>=20
> Thanks
------=_NextPart_000_00C5_01C5A4DF.83EBFB30
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>JH,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>They exist on others but don't do squat =
as far as I=20
can tell.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Wouldn't have been great to =
insert effects=20
across the submixes</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>this way?!!!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Jeff hoover" <<A=20
href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>> wrote =
in message=20
<A=20
=
href=3D"news:43064284@linux">news:43064284@linux</A>...</DIV>Brandon,<BR>=
<BR>On=20
the inserts for your first submix (usually Submix A)there should be a =
<BR>left=20
and right i/o. Route those from and to your interface (442,MEC,=20
<BR>etc.) and that will function as your external effects loop. =
Not in=20
<BR>front of my system at present, but I believe the L & R only =
exist on=20
the <BR>inserts of the first submix .<BR><BR>JH<BR><BR>brandon =
wrote:<BR>>=20
Forgive my ignorance, but I have never attempted this.<BR>> I see =
on the=20
Inserts on the Global Master ther
|
|
|
|
Goto Forum:
Current Time: Mon Mar 03 11:12:14 PST 2025
Total time taken to generate the page: 0.02770 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
