Home » The PARIS Forums » PARIS: Main » Deej, Magma IRQ assignment data?
|
|
| Re: Deej, Magma IRQ assignment data? [message #101272 is a reply to message #101267] |
Tue, 25 November 2008 18:58   |
![Deej [5] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "Deej [5] is currently offline")
Deej [5]
Messages: 373
Registered: March 2008
|
Senior Member |
|
|
"Tom Bruhl" <arpegio@comcast.net> wrote:
>Hey Deej,
>
>Magma IRQs are a big part of the setup for me.
>I know you are on top of this like a, ... well, whatever.
>
>If it's easy enough to find can you post that here for me and others again?
>I'll be using the older PCI style Magma with 5 EDS and maybe the Creamware
>Pro if it likes being there. Maybe the Creamware card will be happier
>directly in the computer though? 3 PCI and 3 PCIe available.
>
>I am inches away from implementing the largest/fastest Paris/Cubase system
>I've ever dreamed about.
>
>I'll keep everyone posted throughout the process.
>
>Thanks,
>Tom
Tom,
What mobo? If you are using the the same as mine, here's my skinny.....
Q9450 CPU OC'ed to 3.2GHz;
Gigabyte GA-EP35-DS3 mobo
PNY Quadro graphics card (Nvidia driver);
4G RAM
SSL Duende PCIe
UAD-2 Quad
Magma x 13 PCI > PCI w/ 4 x UAD-1 cards
Magma x 13 PCIe > PCI w/ RME Multiface, RME MADI, and RME AES 32
Cubase 4.5x
The devices/drivers are configured as follows:
PCIe_1: OPEN
PCIe _16_1: PNY Quadro-IRQ 16 & 17
PCIe_2: Pro Tools Branded 13 slot Magma PCI chassis hosting RME Multiface,
MADI and AES32 PCI cards in slots 1, 5 and 7, interfacing the mobo PCIe slot
using a Magma PEHIFX1host card. All cards share IRQ 18
PCIe_3: UAD-2-IRQ 17
PCIe_16_2: Duende PCIe-IRQ 16
PCI_1: Pro Tools Branded 13 slot Magma PCI chassis hosting 4 x UAD-1 cards
in slots 1, 5, 7 and 11-All cards share IRQ 20
PCI_2: OPEN
If you are only using one 13 x slot Magma, you can be relatively certain
that slots 2 and 4 will share an IRQ and it will not be she same IRQ that
is shared by slots 1, 5, 7 and 11.
The onboard LAN shares IRQ 17 with no ill effects. there are no FW devices
on this machine and it is disabled in the BIOS.
Hope this helps:
Deej
|
|
|
|
| Re: Deej, Magma IRQ assignment data? [message #101273 is a reply to message #101272] |
Tue, 25 November 2008 18:27 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
Thanks Deej,
Sounds like we have about the same box.
I have the same mobo but mine says GA-EP35-ES3P
When counting slots in the Magma are you going left to right
looking at the front of the chassis? My power supply is in the
right rear corner. The Magma card sits on the far left.
I should think it will work the same as yours. I'll have
to get those long ribbons made for Paris to sit in slots
so far apart. Magma host card can go in PCI 1 on mobo.
I'll have five cards so maybe 1 EDS can
take the other IRQ from slot 4, the other four can share
1, 5, 7, 11. Creamware can sit in the computer on PCI
slot 2. The UAD-2 is installed in PCIe 2 right now.
Sound good to you?
Thanks for all your info in this world. It will save me weeks
I should think.
Happy,
Tom
"Deej" <noway@jose.net> wrote in message news:492cad3f$1@linux...
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>Hey Deej,
>>
>>Magma IRQs are a big part of the setup for me.
>>I know you are on top of this like a, ... well, whatever.
>>
>>If it's easy enough to find can you post that here for me and others
>>again?
>>I'll be using the older PCI style Magma with 5 EDS and maybe the Creamware
>>Pro if it likes being there. Maybe the Creamware card will be happier
>>directly in the computer though? 3 PCI and 3 PCIe available.
>>
>>I am inches away from implementing the largest/fastest Paris/Cubase system
>>I've ever dreamed about.
>>
>>I'll keep everyone posted throughout the process.
>>
>>Thanks,
>>Tom
>
>
> Tom,
>
> What mobo? If you are using the the same as mine, here's my skinny.....
>
> Q9450 CPU OC'ed to 3.2GHz;
> Gigabyte GA-EP35-DS3 mobo
> PNY Quadro graphics card (Nvidia driver);
> 4G RAM
> SSL Duende PCIe
> UAD-2 Quad
> Magma x 13 PCI > PCI w/ 4 x UAD-1 cards
> Magma x 13 PCIe > PCI w/ RME Multiface, RME MADI, and RME AES 32
> Cubase 4.5x
>
> The devices/drivers are configured as follows:
>
> PCIe_1: OPEN
>
> PCIe _16_1: PNY Quadro-IRQ 16 & 17
>
> PCIe_2: Pro Tools Branded 13 slot Magma PCI chassis hosting RME Multiface,
> MADI and AES32 PCI cards in slots 1, 5 and 7, interfacing the mobo PCIe
> slot
> using a Magma PEHIFX1host card. All cards share IRQ 18
>
> PCIe_3: UAD-2-IRQ 17
>
> PCIe_16_2: Duende PCIe-IRQ 16
>
> PCI_1: Pro Tools Branded 13 slot Magma PCI chassis hosting 4 x UAD-1 cards
> in slots 1, 5, 7 and 11-All cards share IRQ 20
>
> PCI_2: OPEN
>
> If you are only using one 13 x slot Magma, you can be relatively certain
> that slots 2 and 4 will share an IRQ and it will not be she same IRQ that
> is shared by slots 1, 5, 7 and 11.
>
> The onboard LAN shares IRQ 17 with no ill effects. there are no FW devices
> on this machine and it is disabled in the BIOS.
>
> Hope this helps:
> Deej
>
|
|
|
|
| Re: Deej Magma IRQ assignment data? [message #101274 is a reply to message #101273] |
Tue, 25 November 2008 20:36 |
Deej [5]
Messages: 373
Registered: March 2008
|
Senior Member |
|
|
"Tom Bruhl" <arpegio@comcast.net> wrote:
>Thanks Deej,
>
>Sounds like we have about the same box.
>I have the same mobo but mine says GA-EP35-ES3P
should be close enough.
>When counting slots in the Magma are you going left to right
>looking at the front of the chassis? My power supply is in the
>right rear corner. The Magma card sits on the far left.
Same as mine.
>
>I should think it will work the same as yours. I'll have
>to get those long ribbons made for Paris to sit in slots
>so far apart.
I think I've got a set of the xtra long ones here that I got custom made
from Morgan a few years ago if you need them.
>Magma host card can go in PCI 1 on mobo.
This will work but will force anything that is interfacing with PCI slot
2 to share with the same IRQ that PCIe_16_1 uses which is your video card.........may
be a problem, maybe not. If you've got a Magma that uses the round SCSI style
cable, I'd strongly recommend that you get the Magma PEHIFX1 host card.
>I'll have five cards so maybe 1 EDS can
>take the other IRQ from slot 4, the other four can share
>1, 5, 7, 11.
This will probably work. If your Magma has uses the flat cable I think your
4 x bus sharing slots will be 1, 4, 8 and 12. You'll just have to swap them
around until you find what works if you
're using more than 4 cards.
>Creamware can sit in the computer on PCI
>slot 2.
If your Magma is interfacing with the PCI slot #1, this will almost certainly
force your Creamware card to share with the IRQ that your PCIe_16_1 slot
(video card) is sharing (and may also create a scenarion wherein your CW
card is also sharing an IRQ with the EDS card in slot #4 of your Magma)...at
least that was my experience. Whether or not that will be a show stopper,
I don't know. My Duende and my UAD-2 are sharing this IRQ with the video
card slot with no real issues, but they are all PCIe devices. Not sure how
it will work with PCI and PCIe sharing but I have found this mobo to be pretty
forgiving using ACPI.
>The UAD-2 is installed in PCIe 2 right now.
>Sound good to you?
That's the slot I'm using for my Magma PCIe host card so I can't say.
>
>Thanks for all your info in this world. It will save me weeks
>I should think.
My # is 970-769-0488. Give me a call if you hit a snag. Maybe I can help.
;)
Deej
|
|
|
|
| Re: Deej Magma IRQ assignment data? [message #101275 is a reply to message #101274] |
Tue, 25 November 2008 20:30 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
Hi Deej,
I'd love to snag those EDS ribbons from you. How many can you
spare and do you also have the clock cables? Tell me what you
need for them and shipping. Any long ADAT cables floating around?
My Magma cable is the flat type so 1, 4, 8 & 12 it seems for me.
If I use PCI slot 2 will that throw the Magma assignments off?
I was thinking that the PCI bus may deal more easily with the Creamware
card if it wasn't in the Magma with 5 EDS guys. The UAD-2 sharing with
video
sounds great if it isn't a problem for you. My video card only uses one IRQ
anyway.
Here's what I have with only the UAD-2 installed in PCIe 1x #2 with the 16x
Video card also.
PCI 1-9 = either not shown or one thing is on each
PCI 11 = Wide Open
PCI 15 = Wide Open
IRQ 16 = NVidia GeForce 8600GT
Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
Intel(R) ICH9 Family PCI Express Root Port 5 - 2948
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) G33/G31/P35 Express Chipset PCI Express Root Port -
29C1
IRQ 17 = Intel(R) ICH9 Family PCI Express Root Port 2 - 2942
Intel(R) ICH9 Family PCI Express Root Port 6 - 294A
Realtek Gigabit Ethernet NIC
Universal Audio UAD-2 Duo DSP card
IRQ 18 = USB Universal Host Controller
USB Universal Host Controller
USB Enhanced Host Controller
IRQ 19 = Sata Raid Controller
USB Host Controller
IRQ 20 = wide open
IRQ 21 = USB Host Controller
IRQ 22 = wide open
IRQ 23 = USB Host Controller
Enhanced USB Host Controller
Where would you start?
I'm getting all excited about IRQs. Oh man.
Tom
"Deej" <noway@jose.net> wrote in message news:492cc438$1@linux...
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>Thanks Deej,
>>
>>Sounds like we have about the same box.
>>I have the same mobo but mine says GA-EP35-ES3P
>
>
> should be close enough.
>
>
>>When counting slots in the Magma are you going left to right
>>looking at the front of the chassis? My power supply is in the
>>right rear corner. The Magma card sits on the far left.
>
> Same as mine.
>
>
>>
>>I should think it will work the same as yours. I'll have
>>to get those long ribbons made for Paris to sit in slots
>>so far apart.
>
>
> I think I've got a set of the xtra long ones here that I got custom made
> from Morgan a few years ago if you need them.
>
>
>>Magma host card can go in PCI 1 on mobo.
>
> This will work but will force anything that is interfacing with PCI slot
> 2 to share with the same IRQ that PCIe_16_1 uses which is your video
> card.........may
> be a problem, maybe not. If you've got a Magma that uses the round SCSI
> style
> cable, I'd strongly recommend that you get the Magma PEHIFX1 host card.
>
>
>>I'll have five cards so maybe 1 EDS can
>>take the other IRQ from slot 4, the other four can share
>>1, 5, 7, 11.
>
> This will probably work. If your Magma has uses the flat cable I think
> your
> 4 x bus sharing slots will be 1, 4, 8 and 12. You'll just have to swap
> them
> around until you find what works if you
> 're using more than 4 cards.
>
>>Creamware can sit in the computer on PCI
>>slot 2.
>
>
> If your Magma is interfacing with the PCI slot #1, this will almost
> certainly
> force your Creamware card to share with the IRQ that your PCIe_16_1 slot
> (video card) is sharing (and may also create a scenarion wherein your CW
> card is also sharing an IRQ with the EDS card in slot #4 of your
> Magma)...at
> least that was my experience. Whether or not that will be a show stopper,
> I don't know. My Duende and my UAD-2 are sharing this IRQ with the video
> card slot with no real issues, but they are all PCIe devices. Not sure how
> it will work with PCI and PCIe sharing but I have found this mobo to be
> pretty
> forgiving using ACPI.
>
>>The UAD-2 is installed in PCIe 2 right now.
>
>>Sound good to you?
>
> That's the slot I'm using for my Magma PCIe host card so I can't say.
>>
>>Thanks for all your info in this world. It will save me weeks
>>I should think.
>
> My # is 970-769-0488. Give me a call if you hit a snag. Maybe I can help.
>
> ;)
> Deej
|
|
|
|
| Re: Deej Magma IRQ assignment data? [message #101276 is a reply to message #101275] |
Tue, 25 November 2008 22:58 |
Deej [5]
Messages: 373
Registered: March 2008
|
Senior Member |
|
|
"Tom Bruhl" <arpegio@comcast.net> wrote:
>Hi Deej,
>
>I'd love to snag those EDS ribbons from you. How many can you
>spare and do you also have the clock cables? Tell me what you
>need for them and shipping. Any long ADAT cables floating around?
I've got BNC and ADAT cables out the wazoo. Way more than I'll ever use again.
Let's talk by phone ofer the weekend and figure out what you need vs what
I have here.
>
>My Magma cable is the flat type so 1, 4, 8 & 12 it seems for me.
>
OK then. You're gonna have to go PCI.
>If I use PCI slot 2 will that throw the Magma assignments off?
Maybe. It may not create any issues on that particular mobo though. Lots
of available bandwidth. The question would be withether or not you will have
enought bandwidth on the PCI bus itself if the CW and EDS cards are sharing
IRQ.
>
>I was thinking that the PCI bus may deal more easily with the Creamware
>card if it wasn't in the Magma with 5 EDS guys.
If you're going with 5 x EDS cards, one of these will end up on a different
IRQ from the other 4. If that IRQ shares with the PCI2 slot, then you may
have a trainwreck. I just don't know what to tell you at this point.
The UAD-2 sharing with
>video
>sounds great if it isn't a problem for you. My video card only uses one
IRQ
>anyway.
>
You're gonna be good there.
>Here's what I have with only the UAD-2 installed in PCIe 1x #2 with the
16x
>Video card also.
>
>PCI 1-9 = either not shown or one thing is on each
>PCI 11 = Wide Open
>PCI 15 = Wide Open
>IRQ 16 = NVidia GeForce 8600GT
> Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
> Intel(R) ICH9 Family PCI Express Root Port 5 - 2948
> Intel(R) ICH9 Family USB Universal Host Controller - 2937
> Intel(R) G33/G31/P35 Express Chipset PCI Express Root Port
-
>29C1
>
>IRQ 17 = Intel(R) ICH9 Family PCI Express Root Port 2 - 2942
> Intel(R) ICH9 Family PCI Express Root Port 6 - 294A
> Realtek Gigabit Ethernet NIC
> Universal Audio UAD-2 Duo DSP card
>
>IRQ 18 = USB Universal Host Controller
> USB Universal Host Controller
> USB Enhanced Host Controller
>
>IRQ 19 = Sata Raid Controller
> USB Host Controller
>
>IRQ 20 = wide open
>IRQ 21 = USB Host Controller
>IRQ 22 = wide open
>IRQ 23 = USB Host Controller
> Enhanced USB Host Controller
this looks like my assignment situation.
>
>Where would you start?
You know me better than to ask that.
;)
>
>I'm getting all excited about IRQs. Oh man.
>Tom
It's going to be a trial and error situation, but I'd bet that you will succeed.
That's a very forgiving mobo. Another option you have would be to buy a second
(newer) Magma PCI chassis and a PCIe host card for it. If you go to EBay,
be doubly sure to inquire as o whether or not it uses the round cable to
connect the host cards. the older model with the flat cable won't accept
a PCIe host interface.
BTW....I was doing some checking and found this..........very rare to see
one of these.
http://cgi.ebay.com/AVID-Digidesign-PCI-Expansion-chassis-ca ble_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a3Q7c39Q3a1Q7c2 40Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem350130429927QQ itemZ350130429927QQptZKeyboardsQ5fMIDIQQsalenotsupported
Cheers,
Deej
|
|
|
|
| Re: Deej Magma IRQ assignment data? [message #101277 is a reply to message #101276] |
Tue, 25 November 2008 22:48 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
Hey Deej,
I'll call you over the weekend and work through some of this.
I will need about 6 x 6'+ adat cables. I suspect at least
three long sync cables and five of the fatter ribbons.
I don't need WC though.
I'm not really worried about the PCI bus since Paris was designed
to work under those conditions. The Creamware card should
be as isolated from the Paris IRQ trainwreck as possible.
Brian sure had his way with Paris. I should think I'll get it to work.
I'm having no problems with 4 EDS, and a UAD-1 in a 5 slot machine now.
I lucked out. So that's all it takes I guess!
I'm ready to do this. Failure is not an option.
Thanks for your help,
Tom
"Deej" <noway@jose.net> wrote in message news:492ce59b$1@linux...
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>Hi Deej,
>>
>>I'd love to snag those EDS ribbons from you. How many can you
>>spare and do you also have the clock cables? Tell me what you
>>need for them and shipping. Any long ADAT cables floating around?
>
> I've got BNC and ADAT cables out the wazoo. Way more than I'll ever use
> again.
> Let's talk by phone ofer the weekend and figure out what you need vs what
> I have here.
>
>>
>>My Magma cable is the flat type so 1, 4, 8 & 12 it seems for me.
>>
>
> OK then. You're gonna have to go PCI.
>
>
>>If I use PCI slot 2 will that throw the Magma assignments off?
>
>
> Maybe. It may not create any issues on that particular mobo though. Lots
> of available bandwidth. The question would be withether or not you will
> have
> enought bandwidth on the PCI bus itself if the CW and EDS cards are
> sharing
> IRQ.
>
>>
>>I was thinking that the PCI bus may deal more easily with the Creamware
>>card if it wasn't in the Magma with 5 EDS guys.
>
> If you're going with 5 x EDS cards, one of these will end up on a
> different
> IRQ from the other 4. If that IRQ shares with the PCI2 slot, then you may
> have a trainwreck. I just don't know what to tell you at this point.
>
>
> The UAD-2 sharing with
>>video
>>sounds great if it isn't a problem for you. My video card only uses one
> IRQ
>>anyway.
>>
>
> You're gonna be good there.
>
>
>>Here's what I have with only the UAD-2 installed in PCIe 1x #2 with the
> 16x
>>Video card also.
>>
>>PCI 1-9 = either not shown or one thing is on each
>>PCI 11 = Wide Open
>>PCI 15 = Wide Open
>>IRQ 16 = NVidia GeForce 8600GT
>> Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
>> Intel(R) ICH9 Family PCI Express Root Port 5 - 2948
>> Intel(R) ICH9 Family USB Universal Host Controller - 2937
>> Intel(R) G33/G31/P35 Express Chipset PCI Express Root Port
> -
>>29C1
>>
>>IRQ 17 = Intel(R) ICH9 Family PCI Express Root Port 2 - 2942
>> Intel(R) ICH9 Family PCI Express Root Port 6 - 294A
>> Realtek Gigabit Ethernet NIC
>> Universal Audio UAD-2 Duo DSP card
>>
>>IRQ 18 = USB Universal Host Controller
>> USB Universal Host Controller
>> USB Enhanced Host Controller
>>
>>IRQ 19 = Sata Raid Controller
>> USB Host Controller
>>
>>IRQ 20 = wide open
>>IRQ 21 = USB Host Controller
>>IRQ 22 = wide open
>>IRQ 23 = USB Host Controller
>> Enhanced USB Host Controller
>
>
> this looks like my assignment situation.
>
>>
>>Where would you start?
>
>
> You know me better than to ask that.
> ;)
>
>>
>>I'm getting all excited about IRQs. Oh man.
>>Tom
>
> It's going to be a trial and error situation, but I'd bet that you will
> succeed.
> That's a very forgiving mobo. Another option you have would be to buy a
> second
> (newer) Magma PCI chassis and a PCIe host card for it. If you go to EBay,
> be doubly sure to inquire as o whether or not it uses the round cable to
> connect the host cards. the older model with the flat cable won't accept
> a PCIe host interface.
>
>
> BTW....I was doing some checking and found this..........very rare to see
> one of these.
>
> http://cgi.ebay.com/AVID-Digidesign-PCI-Expansion-chassis-ca ble_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a3Q7c39Q3a1Q7c2 40Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem350130429927QQ itemZ350130429927QQptZKeyboardsQ5fMIDIQQsalenotsupported
>
> Cheers,
>
> Deej
>
>
>
|
|
|
|
Goto Forum:
Current Time: Mon Dec 23 13:42:14 PST 2024
Total time taken to generate the page: 0.02783 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
