The PARIS Forums: PARIS: Main » Protools into Pairs for mixing ?

Home » The PARIS Forums » PARIS: Main » Protools into Pairs for mixing ?

Show: Today's Messages :: Polls :: Message Navigator

Protools into Pairs for mixing ? [message #67369]

Wed, 26 April 2006 07:12

Rich[3]
Messages: 132
Registered: January 2006

Senior Member

I know this was talked about before but I could not find the thread so here
it is again.

What is the best way to move tracks from protools into Paris. Id like to
keep the tracks separate (not a two track mix) and mix/over dub in paris.

It's on an Mbox (PT 6.2 LE) setup now with only two outs. Is there a way
to do this?

Thanks again for the help...

Report message to a moderator

Re: Protools into Pairs for mixing ? [message #67372 is a reply to message #67369]

Wed, 26 April 2006 07:23

Pete Ruthenburg

Messages: 127
Registered: June 2005

Senior Member

Hey Rich,
I think the best way is to bring seperate .wav files for each
track into PARIS.Just burn to a cd or use a hard drive.

Make sure the files all start at the same time,the zero line.

I've had success this way.If they don't open for some reason
there is the utility stripwav that helps.Removes some header info
or something.

Good luck,
Pete

"Rich" <studiodog_99@yahoo.com> wrote:
>
>I know this was talked about before but I could not find the thread so here
>it is again.
>
>What is the best way to move tracks from protools into Paris. Id like to
>keep the tracks separate (not a two track mix) and mix/over dub in paris.
>
>
>It's on an Mbox (PT 6.2 LE) setup now with only two outs. Is there a way
>to do this?
>
>Thanks again for the help...

Report message to a moderator

Re: Protools into Pairs for mixing ? [message #67373 is a reply to message #67369]

Wed, 26 April 2006 08:41

John Macy
Messages: 242
Registered: April 2006

Senior Member

I go back and forth all the time, as a matter of
fact I am consolidating PT files at this moment for
a mix tomorrow (I keep a 002 system mostly for this).

Be sure and consolidate all the files back to the zero
start and there are no problems. I export them to a folder
and batch convert them into Paris. I use a program that
Tankersley turned me onto a long time ago called AWave. It
takes the whole folder and moves them with the right .wav
thing so Paris sees them. It's actually pretty quick...

"Rich" <studiodog_99@yahoo.com> wrote:
>
>I know this was talked about before but I could not find the thread so here
>it is again.
>
>What is the best way to move tracks from protools into Paris. Id like to
>keep the tracks separate (not a two track mix) and mix/over dub in paris.
>
>
>It's on an Mbox (PT 6.2 LE) setup now with only two outs. Is there a way
>to do this?
>
>Thanks again for the help...

Report message to a moderator

Re: Protools into Pairs for mixing ? [message #67376 is a reply to message #67373]

Wed, 26 April 2006 11:51

Rich[3]
Messages: 132
Registered: January 2006

Senior Member

Thanks for all the help - is Awave still around or? Is it worth picking up?

"John Macy" <spamlessjohn@johnmacy.com> wrote:
>
>I go back and forth all the time, as a matter of
>fact I am consolidating PT files at this moment for
>a mix tomorrow (I keep a 002 system mostly for this).
>
>Be sure and consolidate all the files back to the zero
>start and there are no problems. I export them to a folder
>and batch convert them into Paris. I use a program that
>Tankersley turned me onto a long time ago called AWave. It
>takes the whole folder and moves them with the right .wav
>thing so Paris sees them. It's actually pretty quick...
>
>
>"Rich" <studiodog_99@yahoo.com> wrote:
>>
>>I know this was talked about before but I could not find the thread so
here
>>it is again.
>>
>>What is the best way to move tracks from protools into Paris. Id like
to
>>keep the tracks separate (not a two track mix) and mix/over dub in paris.
>>
>>
>>It's on an Mbox (PT 6.2 LE) setup now with only two outs. Is there a way
>>to do this?
>>
>>Thanks again for the help...
>

Report message to a moderator

Re: Protools into Pairs for mixing ? [message #67377 is a reply to message #67376]

Wed, 26 April 2006 12:08

rick

Messages: 1976
Registered: February 2006

Senior Member

http://www.sonicspot.com/awave/awave.html

On 27 Apr 2006 04:51:20 +1000, "rich" <studiodog_99@yahoo.com> wrote:

>
>Thanks for all the help - is Awave still around or? Is it worth picking up?
>
>"John Macy" <spamlessjohn@johnmacy.com> wrote:
>>
>>I go back and forth all the time, as a matter of
>>fact I am consolidating PT files at this moment for
>>a mix tomorrow (I keep a 002 system mostly for this).
>>
>>Be sure and consolidate all the files back to the zero
>>start and there are no problems. I export them to a folder
>>and batch convert them into Paris. I use a program that
>>Tankersley turned me onto a long time ago called AWave. It
>>takes the whole folder and moves them with the right .wav
>>thing so Paris sees them. It's actually pretty quick...
>>
>>
>>"Rich" <studiodog_99@yahoo.com> wrote:
>>>
>>>I know this was talked about before but I could not find the thread so
>here
>>>it is again.
>>>
>>>What is the best way to move tracks from protools into Paris. Id like
>to
>>>keep the tracks separate (not a two track mix) and mix/over dub in paris.
>>>
>>>
>>>It's on an Mbox (PT 6.2 LE) setup now with only two outs. Is there a way
>>>to do this?
>>>
>>>Thanks again for the help...
>>

Report message to a moderator

Re: Protools into Pairs for mixing ? [message #67388 is a reply to message #67369]

Thu, 27 April 2006 00:47

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Hi,
I would encourage getting to work with wormhole for that.
Wormhole can do no problem at least 24 audio tracks (they travel 32bits !)
from one pc to another.
Under Paris wormhole has to be wrapped from FXPansion the only working wrapper
for wormhole known to Dimitrios :)
Regards,
Dimitrios

"Rich" <studiodog_99@yahoo.com> wrote:
>
>I know this was talked about before but I could not find the thread so here
>it is again.
>
>What is the best way to move tracks from protools into Paris. Id like to
>keep the tracks separate (not a two track mix) and mix/over dub in paris.
>
>
>It's on an Mbox (PT 6.2 LE) setup now with only two outs. Is there a way
>to do this?
>
>Thanks again for the help...

Report message to a moderator

Previous Topic:	Sony Cinescore
Next Topic:	I need a bit of help

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 01 12:13:52 PDT 2025

Total time taken to generate the page: 0.01665 seconds