Home » The PARIS Forums » PARIS: Main » Paris Motherboards - So what's the fashion?
Paris Motherboards - So what's the fashion? [message #94086] |
Thu, 27 December 2007 15:51 |
Kim
Messages: 1246 Registered: October 2005
|
Senior Member |
|
|
I'm after something in brown. I've never been a fan of green PCB's...
....err...
So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
K8NS Ultra which for me at least ran well for about a month before deteriorating
into multiple replacements and a general disdain for life and computerness.
The Asrock looks ok to me, and apparently I can use a dual processor now,
and I think I can actually get one here (thought they are rare it seems).
Just thought I'd fly the flag before a purchase. The credit card is pretty
much out and I'm hoping to have something ordered in the next 18 hours...
unless somebody tries defiantly to argue that my Paris system has something
else wrong with it...
Cheers,
Kim.
|
|
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94094 is a reply to message #94086] |
Thu, 27 December 2007 19:12 |
Kim W
Messages: 165 Registered: July 2006
|
Senior Member |
|
|
Hi Kim.
I didn't know Paris could run on a dual processor. How So?
Anyway, My Paris comp mb (also K8NS ultra) died on me a couple of weeks back,
just before a session.
No sign of life at all. I had a second one in my Cubase comp,
which I was able to butcher and get up and running again with no hiccups.
I have since built a rockin' cubase box with one of the newer Gigabyte x2
boards and an x2 6000+. It has 4 pci slots, TI firewire etc.
Wonder if this would make a good paris box.
I'm a little nervous about not having a spare k8ns, so If you
successfuly retire yours, coul;d I stick my hand up and nab yours
for experimentation purposes? I have processors.
I'd like to see what you eventually use.
Happy new year,
Kim
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>I'm after something in brown. I've never been a fan of green PCB's...
>
>...err...
>
>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
>K8NS Ultra which for me at least ran well for about a month before deteriorating
>into multiple replacements and a general disdain for life and computerness.
>
>The Asrock looks ok to me, and apparently I can use a dual processor now,
>and I think I can actually get one here (thought they are rare it seems).
>
>Just thought I'd fly the flag before a purchase. The credit card is pretty
>much out and I'm hoping to have something ordered in the next 18 hours...
> unless somebody tries defiantly to argue that my Paris system has something
>else wrong with it...
>
>Cheers,
>Kim.
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94095 is a reply to message #94094] |
Thu, 27 December 2007 18:35 |
Deej
Messages: 130 Registered: September 2006
|
Senior Member |
|
|
Makes me nervous too. I'm running two of these mobos, two similar ones died
last year and I've got one good backup. They are phenomenal performers with
UAD-1 cards and RME cards and I'm running Opteron 185's in mine, but I'm
hoping what I've got will last me until the x-scaling issues are sorted out
with the dual socket/quad core mobos and Steinberg software.
I've always got my eye peeled for another one of these boards, just in case.
"Kim W." <no@way.com> wrote in message news:47745ba2$1@linux...
>
> Hi Kim.
> I didn't know Paris could run on a dual processor. How So?
> Anyway, My Paris comp mb (also K8NS ultra) died on me a couple of weeks
> back,
> just before a session.
> No sign of life at all. I had a second one in my Cubase comp,
> which I was able to butcher and get up and running again with no hiccups.
> I have since built a rockin' cubase box with one of the newer Gigabyte x2
> boards and an x2 6000+. It has 4 pci slots, TI firewire etc.
> Wonder if this would make a good paris box.
> I'm a little nervous about not having a spare k8ns, so If you
> successfuly retire yours, coul;d I stick my hand up and nab yours
> for experimentation purposes? I have processors.
> I'd like to see what you eventually use.
> Happy new year,
> Kim
>
> "Kim" <hiddensounds@hotmail.com> wrote:
>>
>>
>>I'm after something in brown. I've never been a fan of green PCB's...
>>
>>...err...
>>
>>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the
>>Gigabyte
>>K8NS Ultra which for me at least ran well for about a month before
>>deteriorating
>>into multiple replacements and a general disdain for life and
>>computerness.
>>
>>The Asrock looks ok to me, and apparently I can use a dual processor now,
>>and I think I can actually get one here (thought they are rare it seems).
>>
>>Just thought I'd fly the flag before a purchase. The credit card is pretty
>>much out and I'm hoping to have something ordered in the next 18 hours...
>> unless somebody tries defiantly to argue that my Paris system has
>> something
>>else wrong with it...
>>
>>Cheers,
>>Kim.
>
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94096 is a reply to message #94094] |
Thu, 27 December 2007 20:05 |
Kim
Messages: 1246 Registered: October 2005
|
Senior Member |
|
|
Yep. Assuming I go ahead (about 80-90% at this stage) the old board is yours.
It's still booting and the rest. I'd be cautious about putting PCI cards
in it until I have checked that the EDS's still work, but we'll negotiate
that as I move forward testing.
I'll ship it to you with all the other stuff I have of yours... ;o)
Cheers,
Kim.
"Kim W." <no@way.com> wrote:
>
>Hi Kim.
>I didn't know Paris could run on a dual processor. How So?
>Anyway, My Paris comp mb (also K8NS ultra) died on me a couple of weeks
back,
>just before a session.
>No sign of life at all. I had a second one in my Cubase comp,
>which I was able to butcher and get up and running again with no hiccups.
>I have since built a rockin' cubase box with one of the newer Gigabyte x2
>boards and an x2 6000+. It has 4 pci slots, TI firewire etc.
>Wonder if this would make a good paris box.
>I'm a little nervous about not having a spare k8ns, so If you
>successfuly retire yours, coul;d I stick my hand up and nab yours
>for experimentation purposes? I have processors.
>I'd like to see what you eventually use.
>Happy new year,
>Kim
>
>"Kim" <hiddensounds@hotmail.com> wrote:
>>
>>
>>I'm after something in brown. I've never been a fan of green PCB's...
>>
>>...err...
>>
>>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
>>K8NS Ultra which for me at least ran well for about a month before deteriorating
>>into multiple replacements and a general disdain for life and computerness.
>>
>>The Asrock looks ok to me, and apparently I can use a dual processor now,
>>and I think I can actually get one here (thought they are rare it seems).
>>
>>Just thought I'd fly the flag before a purchase. The credit card is pretty
>>much out and I'm hoping to have something ordered in the next 18 hours...
>> unless somebody tries defiantly to argue that my Paris system has something
>>else wrong with it...
>>
>>Cheers,
>>Kim.
>
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94097 is a reply to message #94095] |
Thu, 27 December 2007 20:07 |
Kim
Messages: 1246 Registered: October 2005
|
Senior Member |
|
|
I have taken mine back twice. Once it was replaced, the other time it was
"worked on".
The first one I got was really good for about 3-4 weeks. After that there
have been little tiny issues constantly. Nothing big enough to make me rip
it out, but every week or so I get some issue and go "I'm sure this MB is
no good..."
Cheers,
Kim.
"Deej" <noway@jose.org> wrote:
>Makes me nervous too. I'm running two of these mobos, two similar ones died
>last year and I've got one good backup. They are phenomenal performers with
>UAD-1 cards and RME cards and I'm running Opteron 185's in mine, but I'm
>hoping what I've got will last me until the x-scaling issues are sorted
out
>with the dual socket/quad core mobos and Steinberg software.
>
>I've always got my eye peeled for another one of these boards, just in case.
>
>
>"Kim W." <no@way.com> wrote in message news:47745ba2$1@linux...
>>
>> Hi Kim.
>> I didn't know Paris could run on a dual processor. How So?
>> Anyway, My Paris comp mb (also K8NS ultra) died on me a couple of weeks
>> back,
>> just before a session.
>> No sign of life at all. I had a second one in my Cubase comp,
>> which I was able to butcher and get up and running again with no hiccups.
>> I have since built a rockin' cubase box with one of the newer Gigabyte
x2
>> boards and an x2 6000+. It has 4 pci slots, TI firewire etc.
>> Wonder if this would make a good paris box.
>> I'm a little nervous about not having a spare k8ns, so If you
>> successfuly retire yours, coul;d I stick my hand up and nab yours
>> for experimentation purposes? I have processors.
>> I'd like to see what you eventually use.
>> Happy new year,
>> Kim
>>
>> "Kim" <hiddensounds@hotmail.com> wrote:
>>>
>>>
>>>I'm after something in brown. I've never been a fan of green PCB's...
>>>
>>>...err...
>>>
>>>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the
>>>Gigabyte
>>>K8NS Ultra which for me at least ran well for about a month before
>>>deteriorating
>>>into multiple replacements and a general disdain for life and
>>>computerness.
>>>
>>>The Asrock looks ok to me, and apparently I can use a dual processor now,
>>>and I think I can actually get one here (thought they are rare it seems).
>>>
>>>Just thought I'd fly the flag before a purchase. The credit card is pretty
>>>much out and I'm hoping to have something ordered in the next 18 hours...
>>> unless somebody tries defiantly to argue that my Paris system has
>>> something
>>>else wrong with it...
>>>
>>>Cheers,
>>>Kim.
>>
>
>
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94098 is a reply to message #94096] |
Thu, 27 December 2007 20:15 |
Kim W
Messages: 165 Registered: July 2006
|
Senior Member |
|
|
Hey thanks, Kim
Hold off shipping, as I may well be in Melb in a couple of weeks or so.
If I have success with the board, I'm happy to pay you for it, as
I cannot find any retailer in OZ that still carry these.
Kim
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>Yep. Assuming I go ahead (about 80-90% at this stage) the old board is yours.
>It's still booting and the rest. I'd be cautious about putting PCI cards
>in it until I have checked that the EDS's still work, but we'll negotiate
>that as I move forward testing.
>
>I'll ship it to you with all the other stuff I have of yours... ;o)
>
>Cheers,
>Kim.
>
>"Kim W." <no@way.com> wrote:
>>
>>Hi Kim.
>>I didn't know Paris could run on a dual processor. How So?
>>Anyway, My Paris comp mb (also K8NS ultra) died on me a couple of weeks
>back,
>>just before a session.
>>No sign of life at all. I had a second one in my Cubase comp,
>>which I was able to butcher and get up and running again with no hiccups.
>>I have since built a rockin' cubase box with one of the newer Gigabyte
x2
>>boards and an x2 6000+. It has 4 pci slots, TI firewire etc.
>>Wonder if this would make a good paris box.
>>I'm a little nervous about not having a spare k8ns, so If you
>>successfuly retire yours, coul;d I stick my hand up and nab yours
>>for experimentation purposes? I have processors.
>>I'd like to see what you eventually use.
>>Happy new year,
>>Kim
>>
>>"Kim" <hiddensounds@hotmail.com> wrote:
>>>
>>>
>>>I'm after something in brown. I've never been a fan of green PCB's...
>>>
>>>...err...
>>>
>>>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
>>>K8NS Ultra which for me at least ran well for about a month before deteriorating
>>>into multiple replacements and a general disdain for life and computerness.
>>>
>>>The Asrock looks ok to me, and apparently I can use a dual processor now,
>>>and I think I can actually get one here (thought they are rare it seems).
>>>
>>>Just thought I'd fly the flag before a purchase. The credit card is pretty
>>>much out and I'm hoping to have something ordered in the next 18 hours...
>>> unless somebody tries defiantly to argue that my Paris system has something
>>>else wrong with it...
>>>
>>>Cheers,
>>>Kim.
>>
>
|
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94100 is a reply to message #94086] |
Thu, 27 December 2007 20:53 |
|
Hi Kim and others, I feel your KNS8 pain (2) deceased..However, like my late
dad always told me: "Buy Cheap, Buy again".. So, for now on, I only buy server
graded Motherboards ..
This is the board I'm using in all of my rack-mounted DAWS
http://www.digiconcepts.com/tyan_motherboards_77.htm
This board is very PAris Friendly and is current at the same time..
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>I'm after something in brown. I've never been a fan of green PCB's...
>
>...err...
>
>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
>K8NS Ultra which for me at least ran well for about a month before deteriorating
>into multiple replacements and a general disdain for life and computerness.
>
>The Asrock looks ok to me, and apparently I can use a dual processor now,
>and I think I can actually get one here (thought they are rare it seems).
>
>Just thought I'd fly the flag before a purchase. The credit card is pretty
>much out and I'm hoping to have something ordered in the next 18 hours...
> unless somebody tries defiantly to argue that my Paris system has something
>else wrong with it...
>
>Cheers,
>Kim.
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94101 is a reply to message #94100] |
Thu, 27 December 2007 21:03 |
Kim
Messages: 1246 Registered: October 2005
|
Senior Member |
|
|
LaMont,
Ya know, I'd almost go there.
What are the plugs behind the PCI slot which the EDS cards are potentially
going to interfere with? Looks suspiciously like the IDE plugs (I'm sure
it is) and something else. Do EDS cards fit without interrupting these or
do I need full SATA gear?
I already have two 250Gig SATA drives anyhow...
What Paris systems have you run with this board?
Given I really do see this as "the final" paris box, I would like it to just
be rock solid for 20 years, so the extra $70 to buy this one isn't really
relevant if it doubles the chance of a long trouble free lifespan.
Cheers,
Kim.
"LaMont" <jjdpro@gmail.com> wrote:
>
>Hi Kim and others, I feel your KNS8 pain (2) deceased..However, like my
late
>dad always told me: "Buy Cheap, Buy again".. So, for now on, I only buy
server
>graded Motherboards ..
>
>This is the board I'm using in all of my rack-mounted DAWS
>http://www.digiconcepts.com/tyan_motherboards_77.htm
>
>This board is very PAris Friendly and is current at the same time..
>
>"Kim" <hiddensounds@hotmail.com> wrote:
>>
>>
>>I'm after something in brown. I've never been a fan of green PCB's...
>>
>>...err...
>>
>>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
>>K8NS Ultra which for me at least ran well for about a month before deteriorating
>>into multiple replacements and a general disdain for life and computerness.
>>
>>The Asrock looks ok to me, and apparently I can use a dual processor now,
>>and I think I can actually get one here (thought they are rare it seems).
>>
>>Just thought I'd fly the flag before a purchase. The credit card is pretty
>>much out and I'm hoping to have something ordered in the next 18 hours...
>> unless somebody tries defiantly to argue that my Paris system has something
>>else wrong with it...
>>
>>Cheers,
>>Kim.
>
|
|
|
Re: Paris Motherboards - So what's the fashion? [message #94102 is a reply to message #94101] |
Thu, 27 December 2007 21:36 |
|
Good questions: (2) Eide slots...4(sata 3.0) slots, even buit-in firewire
which is nice.
However, continue to follow the PCI rules that we've always followed with
EDS cards. All Slots will work if you have 4 cards, but you should disable
a few of the usb2 ports..
Plenty of room for the EDS cards and it does interfere with the IDE ribbon
cable(s)..
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>LaMont,
>
>Ya know, I'd almost go there.
>
>What are the plugs behind the PCI slot which the EDS cards are potentially
>going to interfere with? Looks suspiciously like the IDE plugs (I'm sure
>it is) and something else. Do EDS cards fit without interrupting these or
>do I need full SATA gear?
>
>I already have two 250Gig SATA drives anyhow...
>
>What Paris systems have you run with this board?
>
>Given I really do see this as "the final" paris box, I would like it to
just
>be rock solid for 20 years, so the extra $70 to buy this one isn't really
>relevant if it doubles the chance of a long trouble free lifespan.
>
>Cheers,
>Kim.
>
>
>"LaMont" <jjdpro@gmail.com> wrote:
>>
>>Hi Kim and others, I feel your KNS8 pain (2) deceased..However, like my
>late
>>dad always told me: "Buy Cheap, Buy again".. So, for now on, I only buy
>server
>>graded Motherboards ..
>>
>>This is the board I'm using in all of my rack-mounted DAWS
>>http://www.digiconcepts.com/tyan_motherboards_77.htm
>>
>>This board is very PAris Friendly and is current at the same time..
>>
>>"Kim" <hiddensounds@hotmail.com> wrote:
>>>
>>>
>>>I'm after something in brown. I've never been a fan of green PCB's...
>>>
>>>...err...
>>>
>>>So Mike is going with the Asrock AM2NF3-VSTA. I'm currently on the Gigabyte
>>>K8NS Ultra which for me at least ran well for about a month before deteriorating
>>>into multiple replacements and a general disdain for life and computerness.
>>>
>>>The Asrock looks ok to me, and apparently I can use a dual processor now,
>>>and I think I can actually get one here (thought they are rare it seems).
>>>
>>>Just thought I'd fly the flag before a purchase. The credit card is pretty
>>>much out and I'm hoping to have something ordered in the next 18 hours...
>>> unless somebody tries defiantly to argue that my Paris system has something
>>>else wrong with it...
>>>
>>>Cheers,
>>>Kim.
>>
>
|
|
|
Goto Forum:
Current Time: Fri Dec 06 21:46:57 PST 2024
Total time taken to generate the page: 0.01892 seconds
|