Home » The PARIS Forums » PARIS: Main » You Aaron, Chris Ludwig, or whoever
| You Aaron, Chris Ludwig, or whoever [message #98342] |
Thu, 01 May 2008 06:47  |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
I was reading some tech info on the UAD websight last night and noticed this.
"Matrox G4xx graphics cards users will experience distortion in Audio Export/Processing
results if UAD plugin windows are open during processing.
Workaround: Close all UAD plugin interface windows before performing Audio
Export/Processing."
I've been using a Matrox G450 forever, and don't notice distortion, but there
are the usual clicks and occasional dropouts when using a UAD plug on a track
with edits. (yes, I'm using the drivers from windows, not the crap ones from
matarox) I render the track, solve the problem. I was wondering though if
it might be a good idea to switch to a different vid card to see if that
fixed the problem. If so what would you suggest?
I'm still running the Asus A7S333 mobo. I figure it wouldn't be too expensive
to get something else and experiment.
Rod
|
|
|
|
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98346 is a reply to message #98344] |
Thu, 01 May 2008 10:56  |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Do you ever get clicks or dropouts when the a UAD plug goes over an edit?
What mobo are you using? I don't get distortion, but I'm just wondering if
the things I DO experience could be traced to the G450.
Rod
"Rob Arsenault" <mani1147athotmaildotcom> wrote:
>Hi Rod, I have a G450 and a UAD as well and have never really noticed any
>distortion issues.
>
>Rob
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>news:4819c9e3$1@linux...
>>
>> I was reading some tech info on the UAD websight last night and noticed
>> this.
>> "Matrox G4xx graphics cards users will experience distortion in Audio
>> Export/Processing
>> results if UAD plugin windows are open during processing.
>> Workaround: Close all UAD plugin interface windows before performing Audio
>> Export/Processing."
>>
>> I've been using a Matrox G450 forever, and don't notice distortion, but
>> there
>> are the usual clicks and occasional dropouts when using a UAD plug on
a
>> track
>> with edits. (yes, I'm using the drivers from windows, not the crap ones
>> from
>> matarox) I render the track, solve the problem. I was wondering though
if
>> it might be a good idea to switch to a different vid card to see if that
>> fixed the problem. If so what would you suggest?
>> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
>> expensive
>> to get something else and experiment.
>> Rod
>>
>
>
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98347 is a reply to message #98346] |
Thu, 01 May 2008 11:26 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0012_01C8AB97.5A83D620
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi Rod,
I can get those clicks and inconsistant playback over some edits
with a UAD rev 4.7 too. It can be the case over other plugins too.
I'm using a Radeon 9600 dual head now.
It is fine in all other ways though. I think it's a Paris/UAD thing.=20
I had been using a Matrox G550 and before that a G400.
All exibit the same behavior give or take.
Tom
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
news:481a0430$1@linux...
Do you ever get clicks or dropouts when the a UAD plug goes over an =
edit?
What mobo are you using? I don't get distortion, but I'm just =
wondering if
the things I DO experience could be traced to the G450.
Rod
"Rob Arsenault" <mani1147athotmaildotcom> wrote:
>Hi Rod, I have a G450 and a UAD as well and have never really noticed =
any
>distortion issues.
>
>Rob
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message=20
>news:4819c9e3$1@linux...
>>
>> I was reading some tech info on the UAD websight last night and =
noticed
>> this.
>> "Matrox G4xx graphics cards users will experience distortion in =
Audio
>> Export/Processing
>> results if UAD plugin windows are open during processing.
>> Workaround: Close all UAD plugin interface windows before =
performing Audio
>> Export/Processing."
>>
>> I've been using a Matrox G450 forever, and don't notice distortion, =
but
>> there
>> are the usual clicks and occasional dropouts when using a UAD plug =
on
a=20
>> track
>> with edits. (yes, I'm using the drivers from windows, not the crap =
ones
>> from
>> matarox) I render the track, solve the problem. I was wondering =
though
if
>> it might be a good idea to switch to a different vid card to see if =
that
>> fixed the problem. If so what would you suggest?
>> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too =
>> expensive
>> to get something else and experiment.
>> Rod
>>=20
>
>
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0012_01C8AB97.5A83D620
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi Rod,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I can get those clicks and inconsistant =
playback=20
over some edits</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>with a UAD rev 4.7 too. It can be =
the case=20
over other plugins too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I'm using a Radeon 9600 dual head =
now.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>It is fine in all other ways =
though. I think=20
it's a Paris/UAD thing. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I had been using a Matrox G550 and =
before that a=20
G400.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>All exibit the same behavior give or=20
take.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message <A=20
=
href=3D"news:481a0430$1@linux">news:481a0430$1@linux</A>...</DIV><BR>Do =
you ever=20
get clicks or dropouts when the a UAD plug goes over an edit?<BR>What =
mobo are=20
you using? I don't get distortion, but I'm just wondering if<BR>the =
things I=20
DO experience could be traced to the G450.<BR>Rod<BR>"Rob Arsenault"=20
<mani1147athotmaildotcom> wrote:<BR>>Hi Rod, I have a G450 =
and a UAD=20
as well and have never really noticed any<BR><BR>>distortion=20
issues.<BR>><BR>>Rob<BR>><BR>> "Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message =
<BR>>news:4819c9e3$1@linux...<BR>>><BR>>> I=20
was reading some tech info on the UAD websight last night and=20
noticed<BR><BR>>> this.<BR>>> "Matrox G4xx graphics cards =
users=20
will experience distortion in Audio<BR><BR>>>=20
Export/Processing<BR>>> results if UAD plugin windows are open =
during=20
processing.<BR>>> Workaround: Close all UAD plugin interface =
windows=20
before performing Audio<BR>>>=20
Export/Processing."<BR>>><BR>>> I've been using a Matrox =
G450=20
forever, and don't notice distortion, but<BR><BR>>> =
there<BR>>>=20
are the usual clicks and occasional dropouts when using a UAD plug =
on<BR>a=20
<BR>>> track<BR>>> with edits. (yes, I'm using the drivers =
from=20
windows, not the crap ones<BR><BR>>> from<BR>>> matarox) I =
render=20
the track, solve the problem. I was wondering though<BR>if<BR>>> =
it=20
might be a good idea to switch to a different vid card to see if=20
that<BR>>> fixed the problem. If so what would you =
suggest?<BR>>>=20
I'm still running the Asus A7S333 mobo. I figure it wouldn't be too=20
<BR>>> expensive<BR>>> to get something else and=20
experiment.<BR>>> Rod<BR>>> =
<BR>><BR>><BR></BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_0012_01C8AB97.5A83D620--
|
|
|
|
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98354 is a reply to message #98347] |
Thu, 01 May 2008 20:47 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Thanks Tom. Based on you info, I'll probably not worry about experimenting.
Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Hi Rod,
>
>I can get those clicks and inconsistant playback over some edits
>with a UAD rev 4.7 too. It can be the case over other plugins too.
>
>I'm using a Radeon 9600 dual head now.
>It is fine in all other ways though. I think it's a Paris/UAD thing.=20
>I had been using a Matrox G550 and before that a G400.
>All exibit the same behavior give or take.
>
>Tom
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>news:481a0430$1@linux...
>
> Do you ever get clicks or dropouts when the a UAD plug goes over an =
>edit?
> What mobo are you using? I don't get distortion, but I'm just =
>wondering if
> the things I DO experience could be traced to the G450.
> Rod
> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
> >Hi Rod, I have a G450 and a UAD as well and have never really noticed
=
>any
>
> >distortion issues.
> >
> >Rob
> >
> >"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message=20
> >news:4819c9e3$1@linux...
> >>
> >> I was reading some tech info on the UAD websight last night and =
>noticed
>
> >> this.
> >> "Matrox G4xx graphics cards users will experience distortion in =
>Audio
>
> >> Export/Processing
> >> results if UAD plugin windows are open during processing.
> >> Workaround: Close all UAD plugin interface windows before =
>performing Audio
> >> Export/Processing."
> >>
> >> I've been using a Matrox G450 forever, and don't notice distortion,
=
>but
>
> >> there
> >> are the usual clicks and occasional dropouts when using a UAD plug
=
>on
> a=20
> >> track
> >> with edits. (yes, I'm using the drivers from windows, not the crap
=
>ones
>
> >> from
> >> matarox) I render the track, solve the problem. I was wondering =
>though
> if
> >> it might be a good idea to switch to a different vid card to see if
=
>that
> >> fixed the problem. If so what would you suggest?
> >> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
=
>
> >> expensive
> >> to get something else and experiment.
> >> Rod
> >>=20
> >
> >
>
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Hi Rod,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I can get those clicks and inconsistant
=
>playback=20
>over some edits</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>with a UAD rev 4.7 too. It can be =
>the case=20
>over other plugins too.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I'm using a Radeon 9600 dual head =
>now.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>It is fine in all other ways =
>though. I think=20
>it's a Paris/UAD thing. </FONT></DIV>
><DIV><FONT face=3DArial size=3D2>I had been using a Matrox G550 and =
>before that a=20
>G400.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>All exibit the same behavior give or=20
>take.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>t;=20
> wrote in message <A=20
> =
>href=3D"news:481a0430$1@linux">news:481a0430$1@linux</A>...</DIV><BR>Do
=
>you ever=20
> get clicks or dropouts when the a UAD plug goes over an edit?<BR>What
=
>mobo are=20
> you using? I don't get distortion, but I'm just wondering if<BR>the =
>things I=20
> DO experience could be traced to the G450.<BR>Rod<BR>"Rob Arsenault"=20
> <mani1147athotmaildotcom> wrote:<BR>>Hi Rod, I have a G450 =
>and a UAD=20
> as well and have never really noticed any<BR><BR>>distortion=20
> issues.<BR>><BR>>Rob<BR>><BR>>"Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>t;=20
> wrote in message =
><BR>>news:4819c9e3$1@linux...<BR>>><BR>>> I=20
> was reading some tech info on the UAD websight last night and=20
> noticed<BR><BR>>> this.<BR>>> "Matrox G4xx graphics cards =
>users=20
> will experience distortion in Audio<BR><BR>>>=20
> Export/Processing<BR>>> results if UAD plugin windows are open =
>during=20
> processing.<BR>>> Workaround: Close all UAD plugin interface =
>windows=20
> before performing Audio<BR>>>=20
> Export/Processing."<BR>>><BR>>> I've been using a Matrox =
>G450=20
> forever, and don't notice distortion, but<BR><BR>>> =
>there<BR>>>=20
> are the usual clicks and occasional dropouts when using a UAD plug =
>on<BR>a=20
> <BR>>> track<BR>>> with edits. (yes, I'm using the drivers =
>from=20
> windows, not the crap ones<BR><BR>>> from<BR>>> matarox) I =
>render=20
> the track, solve the problem. I was wondering though<BR>if<BR>>> =
>it=20
> might be a good idea to switch to a different vid card to see if=20
> that<BR>>> fixed the problem. If so what would you =
>suggest?<BR>>>=20
> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too=20
> <BR>>> expensive<BR>>> to get something else and=20
> experiment.<BR>>> Rod<BR>>> =
><BR>><BR>><BR></BLOCKQUOTE>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A> </FONT></DIV></BODY></HTML>
>
>
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98355 is a reply to message #98342] |
Thu, 01 May 2008 21:11 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
FWIW, my rig no longer has the UAD in it but the GeForce cards have been
completely hassle free. If you'd like, let me know and next time I fire up
the rig I'll look to see which nVidia cards are in there. All my G450's died
years ago and I found out that they weren't nearly as snappy and troublefree
as the ones I have now. YMMV.
AA
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:4819c9e3$1@linux...
>
> I was reading some tech info on the UAD websight last night and noticed
> this.
> "Matrox G4xx graphics cards users will experience distortion in Audio
> Export/Processing
> results if UAD plugin windows are open during processing.
> Workaround: Close all UAD plugin interface windows before performing Audio
> Export/Processing."
>
> I've been using a Matrox G450 forever, and don't notice distortion, but
> there
> are the usual clicks and occasional dropouts when using a UAD plug on a
> track
> with edits. (yes, I'm using the drivers from windows, not the crap ones
> from
> matarox) I render the track, solve the problem. I was wondering though if
> it might be a good idea to switch to a different vid card to see if that
> fixed the problem. If so what would you suggest?
> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
> expensive
> to get something else and experiment.
> Rod
>
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98357 is a reply to message #98355] |
Fri, 02 May 2008 06:44 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Yeah, let me know what your using. Your still using the Asus mobo, right?
Rod
"Aaron Allen" <know-spam@not_here.dude> wrote:
>FWIW, my rig no longer has the UAD in it but the GeForce cards have been
>completely hassle free. If you'd like, let me know and next time I fire
up
>the rig I'll look to see which nVidia cards are in there. All my G450's
died
>years ago and I found out that they weren't nearly as snappy and troublefree
>as the ones I have now. YMMV.
>
>AA
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>news:4819c9e3$1@linux...
>>
>> I was reading some tech info on the UAD websight last night and noticed
>> this.
>> "Matrox G4xx graphics cards users will experience distortion in Audio
>> Export/Processing
>> results if UAD plugin windows are open during processing.
>> Workaround: Close all UAD plugin interface windows before performing Audio
>> Export/Processing."
>>
>> I've been using a Matrox G450 forever, and don't notice distortion, but
>> there
>> are the usual clicks and occasional dropouts when using a UAD plug on
a
>> track
>> with edits. (yes, I'm using the drivers from windows, not the crap ones
>> from
>> matarox) I render the track, solve the problem. I was wondering though
if
>> it might be a good idea to switch to a different vid card to see if that
>> fixed the problem. If so what would you suggest?
>> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
>> expensive
>> to get something else and experiment.
>> Rod
>>
>
>
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98361 is a reply to message #98357] |
Fri, 02 May 2008 08:05 |
Chris Ludwig
Messages: 868
Registered: May 2006
|
Senior Member |
|
|
Hi Rod,
I think the G450 issues might have been specific to certain combination of hardware not just being a G450 card.
Chris
Rod Lincoln wrote:
> Yeah, let me know what your using. Your still using the Asus mobo, right?
> Rod
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>> FWIW, my rig no longer has the UAD in it but the GeForce cards have been
>
>> completely hassle free. If you'd like, let me know and next time I fire
> up
>> the rig I'll look to see which nVidia cards are in there. All my G450's
> died
>> years ago and I found out that they weren't nearly as snappy and troublefree
>
>> as the ones I have now. YMMV.
>>
>> AA
>>
>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>> news:4819c9e3$1@linux...
>>> I was reading some tech info on the UAD websight last night and noticed
>
>>> this.
>>> "Matrox G4xx graphics cards users will experience distortion in Audio
>
>>> Export/Processing
>>> results if UAD plugin windows are open during processing.
>>> Workaround: Close all UAD plugin interface windows before performing Audio
>>> Export/Processing."
>>>
>>> I've been using a Matrox G450 forever, and don't notice distortion, but
>
>>> there
>>> are the usual clicks and occasional dropouts when using a UAD plug on
> a
>>> track
>>> with edits. (yes, I'm using the drivers from windows, not the crap ones
>
>>> from
>>> matarox) I render the track, solve the problem. I was wondering though
> if
>>> it might be a good idea to switch to a different vid card to see if that
>>> fixed the problem. If so what would you suggest?
>>> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
>>> expensive
>>> to get something else and experiment.
>>> Rod
>>>
>>
>
--
Chris Ludwig
ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98374 is a reply to message #98357] |
Fri, 02 May 2008 10:54 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
Yup, A7S333 same as you but with a 1900+. No expansion chassis on it (yet,
anyway), just straight into the PCI slots with EDS cards.
AA
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:481b1aa4$1@linux...
>
> Yeah, let me know what your using. Your still using the Asus mobo, right?
> Rod
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>FWIW, my rig no longer has the UAD in it but the GeForce cards have been
>
>>completely hassle free. If you'd like, let me know and next time I fire
> up
>>the rig I'll look to see which nVidia cards are in there. All my G450's
> died
>>years ago and I found out that they weren't nearly as snappy and
>>troublefree
>
>>as the ones I have now. YMMV.
>>
>>AA
>>
>>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>>news:4819c9e3$1@linux...
>>>
>>> I was reading some tech info on the UAD websight last night and noticed
>
>>> this.
>>> "Matrox G4xx graphics cards users will experience distortion in Audio
>
>>> Export/Processing
>>> results if UAD plugin windows are open during processing.
>>> Workaround: Close all UAD plugin interface windows before performing
>>> Audio
>>> Export/Processing."
>>>
>>> I've been using a Matrox G450 forever, and don't notice distortion, but
>
>>> there
>>> are the usual clicks and occasional dropouts when using a UAD plug on
> a
>>> track
>>> with edits. (yes, I'm using the drivers from windows, not the crap ones
>
>>> from
>>> matarox) I render the track, solve the problem. I was wondering though
> if
>>> it might be a good idea to switch to a different vid card to see if that
>>> fixed the problem. If so what would you suggest?
>>> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
>>> expensive
>>> to get something else and experiment.
>>> Rod
>>>
>>
>>
>
|
|
|
|
| Re: You Aaron, Chris Ludwig, or whoever [message #98434 is a reply to message #98346] |
Sat, 03 May 2008 02:44 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
FWIW, I get clicks and dropouts with some combinations of plugins.
I don't own an IUD, but it seems that Waves plugins in conjunction
with PSP, (VintageWarmer... which I like a lot), or Amplitube
can cause the dropouts.
Usually flushing the memory (by way of saving and reboot), fixes it.
I have started rendering tracks with lots of edits to avoid this.
(minus plugins so I can tweak as I build the mix.)
I'm thinking that this problem is more related to screwy memory allocation
as one builds a complex mix, (and applies more plugins), and is probably
responsible
for the persistence of the occasional Crash-on-exit, and unhandled
exception, rather than the IUD plugins themselves.
Having said that, I reiterate that I don't own one, so WTF do I know?? I'm
just relating that I have had the exact same symptoms.
Oh, and I'm using a NF3 K8NS-ULTRA 939.
Kim. (Double-yuu, that is...)
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>Do you ever get clicks or dropouts when the a UAD plug goes over an edit?
>What mobo are you using? I don't get distortion, but I'm just wondering
if
>the things I DO experience could be traced to the G450.
>Rod
>"Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>Hi Rod, I have a G450 and a UAD as well and have never really noticed any
>
>>distortion issues.
>>
>>Rob
>>
>>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>>news:4819c9e3$1@linux...
>>>
>>> I was reading some tech info on the UAD websight last night and noticed
>
>>> this.
>>> "Matrox G4xx graphics cards users will experience distortion in Audio
>
>>> Export/Processing
>>> results if UAD plugin windows are open during processing.
>>> Workaround: Close all UAD plugin interface windows before performing
Audio
>>> Export/Processing."
>>>
>>> I've been using a Matrox G450 forever, and don't notice distortion, but
>
>>> there
>>> are the usual clicks and occasional dropouts when using a UAD plug on
>a
>>> track
>>> with edits. (yes, I'm using the drivers from windows, not the crap ones
>
>>> from
>>> matarox) I render the track, solve the problem. I was wondering though
>if
>>> it might be a good idea to switch to a different vid card to see if that
>>> fixed the problem. If so what would you suggest?
>>> I'm still running the Asus A7S333 mobo. I figure it wouldn't be too
>>> expensive
>>> to get something else and experiment.
>>> Rod
>>>
>>
>>
>
|
|
|
|
Goto Forum:
Current Time: Tue Dec 24 13:54:48 PST 2024
Total time taken to generate the page: 0.01900 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
