The PARIS Forums: PARIS: Main » MEC B not passing audio

Home » The PARIS Forums » PARIS: Main » MEC B not passing audio

Show: Today's Messages :: Polls :: Message Navigator

MEC B not passing audio [message #107854]

Sat, 21 September 2013 16:35

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

HI Folks -

I have a few extra MECS and Cards here that I'm planning to hook up, BUT I want to take things slowly and make sure everything is working at each step before I proceed to the next one.

Seems I'm stuck fairly early on in the game.

Right now I have 2 EDS cards and 2 MECs, each card attached to its own MEC.
MEC A has 8 IN -> Slot 1; 8 OUT -> Slot 3; ADAT -> Slot 5
MEC B has 8 IN -> Slot 2; 8 OUT -> Slot 4

All modules, objects, MECS etc are recognized in the Patch Bay and PARIS loads up and plays fine. However, I cannot seem to get any audio to pass out of MEC B.

I have swapped 8 OUT cards back and forth between the MECs. I have tried routing from the Master section on MEC B; I have tried sending through Auxes, Inserts (with returns connected) and Mixer B L & R.

Any ideas? My next step is to swap the EDS cards connected and see if the problem follows a card, then I'd replace the MEC with another one here.

Thought I'd check to see if I'm missing something obvious first...

Thanks

Ted

Report message to a moderator

Re: MEC B not passing audio [message #107855 is a reply to message #107854]

Sat, 21 September 2013 16:47

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Ted,

My first draft of this read:
'I'd first make sure that the patch bay is set up to send the outputs from mixer B to the MEC.'

I guess I need to read better. I'd check that the MEC is getting word clock. Also make sure that you have a default project set to word clock if you are clocking externally.

Let me know how it goes and if I can be more help.

All the best!

Mike

PS - I'm finally getting into the modern, portable music player on the phone thing. I'm ripping all my Elvis CDs to FLAC, most of which I bought in the late eighties and early 90s. Smile

[Updated on: Sat, 21 September 2013 16:55]

Report message to a moderator

Re: MEC B not passing audio [message #107857 is a reply to message #107855]

Sat, 21 September 2013 19:04

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

Yup -

Wordclock was the issue. I am using an external clock, and had selected Wordclock in the Project window, but was connecting directly from the clock to each MEC, rather than from MEC A -> MEC B.

Interesting. Brings up a bunch of questions about the value of using an external clock, since Lavry argues that running through devices (daisy chaining) with a good clock is not as good as using internal even if the internal clock specs themselves are not as good.

Hmmmm

Thanks a lot Mike!

T

Report message to a moderator

Re: MEC B not passing audio [message #107865 is a reply to message #107857]

Sun, 22 September 2013 04:44

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Ted,

You actually had it set right the first time. It sounds like your word clock generator has gone dark on one of its outputs.

Are you sure that you have a default project with word clock selected? This is actually very important. I get all kinds of clicks and pops when I don't have the default project saved with the work clock option set. I was really surprised, but just changing the project to word clock after PARIS has opened doesn't work properly, at least when some cards don't have an interface connected (my situation).

Keep me posted!

Mike

Report message to a moderator

Re: MEC B not passing audio [message #107866 is a reply to message #107865]

Sun, 22 September 2013 05:35

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

Hmmm

OK I'll check into this and let you know.

Ted

Report message to a moderator

Previous Topic:	bounce to disk issues
Next Topic:	Mic Techniques - acoustic guitar

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Apr 27 01:28:10 PDT 2025

Total time taken to generate the page: 0.01792 seconds