The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » magma

Show: Today's Messages :: Polls :: Message Navigator

magma [message #92704]

Wed, 14 November 2007 15:38

AlexPlasko

Messages: 211
Registered: September 2006

Senior Member

Guys
I want to get a 7 slot PCI magma with a PCI express host card.I need to run
2 powercore cards,2 uad PCI and possibly a couple others.I also want a UAD
ultra PCI Express on the host .any known issues with that setup?caveat
emptor?

Report message to a moderator

Re: magma [message #92710 is a reply to message #92704]

Wed, 14 November 2007 17:11

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI Alex,
This info from UADs web zine is still accurate.
http://www.uaudio.com/webzine/2006/december/index5.html

Good luck getting UADs and a TC to work in an expansion chassis.
My advice would be to swap you UAD PCI cards to PCI-e ones and use a
PCI-e to PCI-e expansion chassis.

Which versions of the Powercore? The old pre- mk2 ones? If so you are
best off getting one PCI or PCI-e mk2 one to replace those 2. The old
will not work on newer hardware.
I've used the Cyclone chassis a few times with UADs and it worked great.
Otherwise I would go for the SBS chassis.

Chris
alex plasko wrote:
> Guys
> I want to get a 7 slot PCI magma with a PCI express host card.I need to run
> 2 powercore cards,2 uad PCI and possibly a couple others.I also want a UAD
> ultra PCI Express on the host .any known issues with that setup?caveat
> emptor?
>
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Re: magma [message #92717 is a reply to message #92710]

Wed, 14 November 2007 18:53

AlexPlasko

Messages: 211
Registered: September 2006

Senior Member

Thanks Chris.I have to think about this one.
the UAD's I can upgrade ,but the powercore already IS an upgrade ,so an
upgrade to PCI express is not allowed.(1 card is a PCI MK I ,the other is a
MK II.).
I've been thinking about a UAD-1 extreme pack, so Id get most of the plugs
and more DSP, for about the same as just buying the plugs.
there goes the credit card balance again!

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:473b9ded$1@linux...
>
> HI Alex,
> This info from UADs web zine is still accurate.
> http://www.uaudio.com/webzine/2006/december/index5.html
>
> Good luck getting UADs and a TC to work in an expansion chassis.
> My advice would be to swap you UAD PCI cards to PCI-e ones and use a PCI-e
> to PCI-e expansion chassis.
>
> Which versions of the Powercore? The old pre- mk2 ones? If so you are best
> off getting one PCI or PCI-e mk2 one to replace those 2. The old will not
> work on newer hardware.
> I've used the Cyclone chassis a few times with UADs and it worked great.
> Otherwise I would go for the SBS chassis.
>
> Chris
> alex plasko wrote:
>> Guys
>> I want to get a 7 slot PCI magma with a PCI express host card.I need to
>> run 2 powercore cards,2 uad PCI and possibly a couple others.I also want
>> a UAD ultra PCI Express on the host .any known issues with that
>> setup?caveat emptor?
>>
>>
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762

Report message to a moderator

Re: magma [message #92732 is a reply to message #92717]

Thu, 15 November 2007 07:51

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI Alex,
You better make sure your Powercore MK1 is compatible voltage wise with
current 3.3 volt PCI slots before you stick it in a chassis.

Chris

alex plasko wrote:
> Thanks Chris.I have to think about this one.
> the UAD's I can upgrade ,but the powercore already IS an upgrade ,so an
> upgrade to PCI express is not allowed.(1 card is a PCI MK I ,the other is a
> MK II.).
> I've been thinking about a UAD-1 extreme pack, so Id get most of the plugs
> and more DSP, for about the same as just buying the plugs.
> there goes the credit card balance again!
>
> "Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
> news:473b9ded$1@linux...
>> HI Alex,
>> This info from UADs web zine is still accurate.
>> http://www.uaudio.com/webzine/2006/december/index5.html
>>
>> Good luck getting UADs and a TC to work in an expansion chassis.
>> My advice would be to swap you UAD PCI cards to PCI-e ones and use a PCI-e
>> to PCI-e expansion chassis.
>>
>> Which versions of the Powercore? The old pre- mk2 ones? If so you are best
>> off getting one PCI or PCI-e mk2 one to replace those 2. The old will not
>> work on newer hardware.
>> I've used the Cyclone chassis a few times with UADs and it worked great.
>> Otherwise I would go for the SBS chassis.
>>
>> Chris
>> alex plasko wrote:
>>> Guys
>>> I want to get a 7 slot PCI magma with a PCI express host card.I need to
>>> run 2 powercore cards,2 uad PCI and possibly a couple others.I also want
>>> a UAD ultra PCI Express on the host .any known issues with that
>>> setup?caveat emptor?
>>>
>>>
>> --
>> Chris Ludwig
>> ADK
>> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>> www.adkproaudio.com <http://www.adkproaudio.com/>
>> (859) 635-5762
>
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com

Report message to a moderator

Re: magma [message #92742 is a reply to message #92732]

Thu, 15 November 2007 13:16

AlexPlasko

Messages: 211
Registered: September 2006

Senior Member

thanks Chris for the heads up. its been working fine for 3 + years in a tyan
2885.no problems.I checked again anyway and it is compliant.
"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:473c6c4f@linux...
> HI Alex,
> You better make sure your Powercore MK1 is compatible voltage wise with
> current 3.3 volt PCI slots before you stick it in a chassis.
>
>
> Chris
>
>
> alex plasko wrote:
>> Thanks Chris.I have to think about this one.
>> the UAD's I can upgrade ,but the powercore already IS an upgrade ,so an
>> upgrade to PCI express is not allowed.(1 card is a PCI MK I ,the other
>> is a MK II.).
>> I've been thinking about a UAD-1 extreme pack, so Id get most of the
>> plugs and more DSP, for about the same as just buying the plugs.
>> there goes the credit card balance again!
>>
>> "Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>> news:473b9ded$1@linux...
>>> HI Alex,
>>> This info from UADs web zine is still accurate.
>>> http://www.uaudio.com/webzine/2006/december/index5.html
>>>
>>> Good luck getting UADs and a TC to work in an expansion chassis.
>>> My advice would be to swap you UAD PCI cards to PCI-e ones and use a
>>> PCI-e to PCI-e expansion chassis.
>>>
>>> Which versions of the Powercore? The old pre- mk2 ones? If so you are
>>> best off getting one PCI or PCI-e mk2 one to replace those 2. The old
>>> will not work on newer hardware.
>>> I've used the Cyclone chassis a few times with UADs and it worked great.
>>> Otherwise I would go for the SBS chassis.
>>>
>>> Chris
>>> alex plasko wrote:
>>>> Guys
>>>> I want to get a 7 slot PCI magma with a PCI express host card.I need
>>>> to run 2 powercore cards,2 uad PCI and possibly a couple others.I also
>>>> want a UAD ultra PCI Express on the host .any known issues with that
>>>> setup?caveat emptor?
>>>>
>>>>
>>> --
>>> Chris Ludwig
>>> ADK
>>> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>>> www.adkproaudio.com <http://www.adkproaudio.com/>
>>> (859) 635-5762
>>
>>
>
> --
> Chris Ludwig
>
> ADK Pro Audio
> (859) 635-5762
> www.adkproaudio.com
> chrisl@adkproaudio.com

Report message to a moderator

Previous Topic:	Source for 19" rack rails?
Next Topic:	Am I wasting my time here? ;o)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr 05 02:01:47 PDT 2025

Total time taken to generate the page: 0.01046 seconds