The PARIS Forums: PARIS: Main » My 2nd mec is showing signal

Home » The PARIS Forums » PARIS: Main » My 2nd mec is showing signal - No recording ?? (How to get my (B) Mec to find it's signal, I maped it, Help !!)

Show: Today's Messages :: Polls :: Message Navigator

My 2nd mec is showing signal - No recording ?? [message #104993]

Thu, 11 March 2010 05:14

TriSound Recording

Messages: 55
Registered: December 2009
Location: Federal Way, Wa.

Member

Ok, I try-ed to get some recording done tonight on the Mec(B)
I send a signal to input #1 and #2. I set up the patch bay the same way i did Mec(A). Mec(A) works fine but not Mec(B).

So what's up with this now. Im sure it's something I'm not doing
right. Looks like to me you have to map out each Mec by it's self and then they (the Mec's)just buss together at the end to the Master buss. Is this right?

So what I'm I not doing here. So the (Mec B) has green LED on
the input cards showing signal. I just don't have a response when I hit the record light. Bye the way the record light do work and also on the C-16. Maybe something in the patch bay but
not sure. I am still reading the book but have not seen anything as of yet to render a fix. Helllllllllp !!! Rolling Eyes

cheers,

Jeff

Not like a 2" recorder, you don't always know if the computer is
broke or it's just toying with you.... Laughing

Report message to a moderator

Re: My 2nd mec is showing signal - No recording ?? [message #104996 is a reply to message #104993]

Thu, 11 March 2010 08:47

thesandbox1

Messages: 167
Registered: July 2009
Location: Carmel, IN

Senior Member

Can you drag some audio files onto the card the mec is on and does it play audio? Have you double clicked on the inputs for MEC B to make sure the correct modules you are using for inputs are indeed the ones for the correct channels. I have had where the Adat card was showing on like channels 1-8 instead of the input card and had to move the input card up or from the selections on the right.

.....wow I type from Italy and it gives me an Italy flag! Wink

https://www.facebook.com/Sandbox-Productions-Recording-Studi o-Carmel-IN-122733877784336/

[Updated on: Thu, 11 March 2010 08:49]

Report message to a moderator

Re: My 2nd mec is showing signal - No recording ?? [message #104997 is a reply to message #104993]

Thu, 11 March 2010 09:00

mani1147

Messages: 130
Registered: May 2009
Location: NB Canada

Senior Member

Hi Jeff, just a couple things to eliminate;
1. You do have a BNC cable from the primary MEC clock out to the secondary Mec clock in?
2. The little ribbon cables from one EDS card to the other are all in place properly?

Rob_A

[Updated on: Thu, 11 March 2010 09:24]

Report message to a moderator

Previous Topic:	Changing your PARIS colour scheme using Paris.dat
Next Topic:	How to use the 24 bit converters ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jan 01 17:20:50 PST 2025

Total time taken to generate the page: 0.05920 seconds