The PARIS Forums: PARIS: Main » More Drum Bus Compression ...

Home » The PARIS Forums » PARIS: Main » More Drum Bus Compression ...

Show: Today's Messages :: Polls :: Message Navigator

More Drum Bus Compression ... [message #68164]

Sat, 13 May 2006 14:10

sonicartproductions

Messages: 27
Registered: October 2005

Junior Member

If you don't mind blowing a whole Card on it and have a hardware
compressor --- this is what I do (maybe not the purist way, but I like it
....):

Assign all drums to any stereo aux.

Set that aux to post (so your fader moves matter)

mute the card you are doing this on (in the global mixer)

send the aux to an output (it will still send despite the fact that the card
itself is muted in global stereo bus)

Split that output

send one signal right back into the in of another card (since it is in
realtime either live input, or an aux return)

send the copy through an analog comp. and return in the same manner.

your other auxes (like drum verbs, and even additional tracks) from the
muted card can be returned the same way via analog chain (as with the
drums), spdif (from one mec to another) or even an adat card from one mec to
another.

I bought a DA16X to gain decent sounding outs which also provides me with
great stereo outs for my monitoring.

Cheers,
Ted

Report message to a moderator

Re: More Drum Bus Compression ... [message #68198 is a reply to message #68164]

Sun, 14 May 2006 06:37

Rob Arsenault

Messages: 152
Registered: September 2005

Senior Member

Ted, I wonder if this would work for me? Here is the setup. I have a 2 card
sys with Mec on 1 card and 442 on the other (BNCed together). I have a 3rd
card stored in box (backup) along with a spare 442 and 2 IF2s. I don't have
a master clock gen to use a third interface so the spare 442 is out but I
was wondering If I could use and IF2 on the third card if I was to install
it to do the drum buss comp thing? I know you need a clock gen to do 3 MECs
or 3 442s but to 2 MECs and an IF2 plugged directly onto the third card,
anyone ever tested this?

Thanks
Rob

"Ted" <sonicartproductions@hotmail.com> wrote in message
news:44664a60$1@linux...
> If you don't mind blowing a whole Card on it and have a hardware
> compressor --- this is what I do (maybe not the purist way, but I like it
> ...):
>
> Assign all drums to any stereo aux.
>
> Set that aux to post (so your fader moves matter)
>
> mute the card you are doing this on (in the global mixer)
>
> send the aux to an output (it will still send despite the fact that the
card
> itself is muted in global stereo bus)
>
> Split that output
>
> send one signal right back into the in of another card (since it is in
> realtime either live input, or an aux return)
>
> send the copy through an analog comp. and return in the same manner.
>
> your other auxes (like drum verbs, and even additional tracks) from the
> muted card can be returned the same way via analog chain (as with the
> drums), spdif (from one mec to another) or even an adat card from one mec
to
> another.
>
> I bought a DA16X to gain decent sounding outs which also provides me with
> great stereo outs for my monitoring.
>
> Cheers,
> Ted
>
>

Report message to a moderator

Re: More Drum Bus Compression ... [message #68244 is a reply to message #68164]

Mon, 15 May 2006 05:51

cujo
Messages: 285
Registered: July 2005

Senior Member

That is a nifty idea. What is this DA16X?

"Ted" <sonicartproductions@hotmail.com> wrote:
>If you don't mind blowing a whole Card on it and have a hardware
>compressor --- this is what I do (maybe not the purist way, but I like it

>...):
>
>Assign all drums to any stereo aux.
>
>Set that aux to post (so your fader moves matter)
>
>mute the card you are doing this on (in the global mixer)
>
>send the aux to an output (it will still send despite the fact that the
card
>itself is muted in global stereo bus)
>
>Split that output
>
>send one signal right back into the in of another card (since it is in
>realtime either live input, or an aux return)
>
>send the copy through an analog comp. and return in the same manner.
>
>your other auxes (like drum verbs, and even additional tracks) from the

>muted card can be returned the same way via analog chain (as with the
>drums), spdif (from one mec to another) or even an adat card from one mec
to
>another.
>
>I bought a DA16X to gain decent sounding outs which also provides me with

>great stereo outs for my monitoring.
>
>Cheers,
>Ted
>
>

Report message to a moderator

Re: More Drum Bus Compression ... [message #68329 is a reply to message #68198]

Wed, 17 May 2006 09:23

Sound Dog

Messages: 44
Registered: October 2005

Member

Rob,

According to the PARIS manual, you can't connect an IF2 directly to an EDS
card in a multi-card system.

Cheers,

Stewart.

Rob Arsenault wrote in message <446731d5@linux>...
>Ted, I wonder if this would work for me? Here is the setup. I have a 2 card
>sys with Mec on 1 card and 442 on the other (BNCed together). I have a 3rd
>card stored in box (backup) along with a spare 442 and 2 IF2s. I don't have
>a master clock gen to use a third interface so the spare 442 is out but I
>was wondering If I could use and IF2 on the third card if I was to install
>it to do the drum buss comp thing? I know you need a clock gen to do 3 MECs
>or 3 442s but to 2 MECs and an IF2 plugged directly onto the third card,
>anyone ever tested this?
>
>Thanks
>Rob
>
>
>"Ted" <sonicartproductions@hotmail.com> wrote in message
>news:44664a60$1@linux...
>> If you don't mind blowing a whole Card on it and have a hardware
>> compressor --- this is what I do (maybe not the purist way, but I like it
>> ...):
>>
>> Assign all drums to any stereo aux.
>>
>> Set that aux to post (so your fader moves matter)
>>
>> mute the card you are doing this on (in the global mixer)
>>
>> send the aux to an output (it will still send despite the fact that the
>card
>> itself is muted in global stereo bus)
>>
>> Split that output
>>
>> send one signal right back into the in of another card (since it is in
>> realtime either live input, or an aux return)
>>
>> send the copy through an analog comp. and return in the same manner.
>>
>> your other auxes (like drum verbs, and even additional tracks) from the
>> muted card can be returned the same way via analog chain (as with the
>> drums), spdif (from one mec to another) or even an adat card from one mec
>to
>> another.
>>
>> I bought a DA16X to gain decent sounding outs which also provides me with
>> great stereo outs for my monitoring.
>>
>> Cheers,
>> Ted
>>
>>
>
>

Report message to a moderator

Previous Topic:	Check out the new Macbook pro!
Next Topic:	OT WD SATA drive life expectancy

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 18 10:24:41 PST 2024

Total time taken to generate the page: 0.00880 seconds