Home » The PARIS Forums » PARIS: Main » This is what pisses me off about Paris
|
|
|
|
| Re: This is what pisses me off about Paris [message #56402 is a reply to message #56401] |
Fri, 29 July 2005 23:07   |
![Deej [1] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "Deej [1] is currently offline")
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
ing this, no audio will play through the submix that card C is
assigned to.
I guess I've got more testing to do. First I'm going to pull card B, replace
it with card C and see if I have any problems with playback on either MEC B
or C.
If it won't play on either MEC, then it's likely the card. If it plays on
one MEC but not the other, then it's likely the MEC.
If it plays on both MECs, I'm going to start switching ribbon cables between
the cards and see if one of them is the culprit.
If I still have no problems, I'll be stumped 'cause cards A & B work
fine.......or so it seems right now.
Maybe I'll get finished with this sometime today.
;o(
"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
news:42eb101e@linux...
> The NICE thing about Paris is that it totally doesn't matter
> which MEC is on what card... it is completely assignable in
> the global master window... you can literally shuffle your
> MEC's around then reassign them without losing anything in
> the way of routing.
>
> David.
>
> DJ wrote:
> > I've been working for about 6 months with 3 EDS cards which are hooked
up to
> > three MECs. The last MEC doesn't have any analog I/O cards, just ADAT
cards.
> > I usually track to the first two MECs.
> >
> > Well, for some reason I can't fathom, suddenly MEC 3 stopped
> > sycing.........lots of digital hash. switching WC on and off would sync
it
> > back up. Then that stopped working. The switching the EDS card on Submix
3
> > in the global window to virtual and then back to card worked. Now that
has
> > stopped working. I thought it might be a bad cable so I switched the
SCSI
> > cable from MEC 3 to Card B and attached the cable from MEC 2 to card C
> > figuring that if it was either a card or cable, I could trace the
problem.,
> > Well, I found that that hooking this MEC #3 (which was previously
attached
> > Card C) to Card B and attaching Card C to MEC #2 (which was previously
> > attached MEC #3) totlly solves the problem.
> > Rock solid, no sync problems and absolutely no discernable reason for
this
> > behaviour. However, I did add an RME multiface to my Cubase SX system
> > yesterday and all of these devices are sharing a common clock so I'm
> > wondering if, by some cursed digital happenstance, this might have
caused
> > the problem. I sort of doubt it though because the system was starting
to
> > act erratic before I hooked up the Multiface to the SX DAW.
> >
> > I've got project in the works here that has 12 songs with lots of tracks
on
> > each. There's still lots more tracking/dubs to do on this project and
I've
> > got a producer coming in tomorrow to discuss a label project. I'm going
be
> > jacking around with reconfiguring my patchbay presets tonight to reflect
the
> > new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on the
> > project I'm working on is playing back from the wrong &^$#^&^%&^&^%$
submix.
|
|
|
|
| Re: This is what pisses me off about Paris [message #56407 is a reply to message #56401] |
Sat, 30 July 2005 07:27 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
;
>> > Grrrrr...........
>> >
>> > ;o(
>> >
>> >
>
>I vote for ribbon cables... do you have any Cramolin or
similar cleaner around? Try applying some to a seperate
ribbon connector (one not bing used for Paris) then work
that connector over the pins on the card... kind of like an
applicator. You could even chop an old IDE cable end in half
to use. This will wet the pins on the card and burnish
the contacts without loading up your jumper ribbons with
cleaning solution.
David.
DJ wrote:
> Looks like it's a bad card or bad ribbon cable(s). Just booted the system
> and now the same thing is happening. It's happening on Submix B now (which
> was switched to card C last night). I've done enough testing to be pretty
> sure it's not one of the HD SCSI cables or one of the MECs.
>
> When loading my default .ppj, I'm getting a digital pulse in the global
> fader. The only thing that stops this is switching the submix that is
> assigned to card C to virtual and then back to card. This stops the noise,
> but after doing this, no audio will play through the submix that card C is
> assigned to.
>
> I guess I've got more testing to do. First I'm going to pull card B, replace
> it with card C and see if I have any problems with playback on either MEC B
> or C.
>
> If it won't play on either MEC, then it's likely the card. If it plays on
> one MEC but not the other, then it's likely the MEC.
>
> If it plays on both MECs, I'm going to start switching ribbon cables between
> the cards and see if one of them is the culprit.
>
> If I still have no problems, I'll be stumped 'cause cards A & B work
> fine.......or so it seems right now.
>
> Maybe I'll get finished with this sometime today.
>
> ;o(
>
>
> "Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> news:42eb101e@linux...
>
>>The NICE thing about Paris is that it totally doesn't matter
>>which MEC is on what card... it is completely assignable in
>>the global master window... you can literally shuffle your
>>MEC's around then reassign them without losing anything in
>>the way of routing.
>>
>>David.
>>
>>DJ wrote:
>>
>>>I've been working for about 6 months with 3 EDS cards which are hooked
>
> up to
>
>>>three MECs. The last MEC doesn't have any analog I/O cards, just ADAT
>
> cards.
>
>>>I usually track to the first two MECs.
>>>
>>>Well, for some reason I can't fathom, suddenly MEC 3 stopped
>>>sycing.........lots of digital hash. switching WC on and off would sync
>
> it
>
>>>back up. Then that stopped working. The switching the EDS card on Submix
>
> 3
>
>>>in the global window to virtual and then back to card worked. Now that
>
> has
>
>>>stopped working. I thought it might be a bad cable so I switched the
>
> SCSI
>
>>>cable from MEC 3 to Card B and attached the cable from MEC 2 to card C
>>>figuring that if it was either a card or cable, I could trace the
>
> problem.,
>
>>>Well, I found that that hooking this MEC #3 (which was previously
>
> attached
>
>>>Card C) to Card B and attaching Card C to MEC #2 (which was previously
>>>attached MEC #3) totlly solves the problem.
>>>Rock solid, no sync problems and absolutely no discernable reason for
>
> this
>
>>>behaviour. However, I did add an RME multiface to my Cubase SX system
>>>yesterday and all of these devices are sharing a common clock so I'm
>>>wondering if, by some cursed digital happenstance, this might have
>
> caused
>
>>>the problem. I sort of doubt it though because the system was starting
>
> to
>
>>>act erratic before I hooked up the Multiface to the SX DAW.
>>>
>>>I've got project in the wo
|
|
|
|
| Re: This is what pisses me off about Paris [message #56408 is a reply to message #56407] |
Sat, 30 July 2005 07:39 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
rks here that has 12 songs with lots of tracks
>
> on
>
>>>each. There's still lots more tracking/dubs to do on this project and
>
> I've
>
>>>got a producer coming in tomorrow to discuss a label project. I'm going
>
> be
>
>>>jacking around with reconfiguring my patchbay presets tonight to reflect
>
> the
>
>>>new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on the
>>>project I'm working on is playing back from the wrong &^$#^&^%&^&^%$
>
> submix.
>
>>>This stuff pisses me off to no end. This same thing started happening
>
> when I
>
>>>was using 2 x MECs and a 442.
>>>
>>>I thought I had a bad EDS card yesterday and I sent TheSoniq the money
>
> for
>
>>>another one. Then the system started working normally again so I called
>
> him
>
>>>and told him to hold off. I don't know if this is a card issue or not,
>
> but
>
>>>I'm not gonna' get caught with my pants down so I'm going to tell him to
>>>send it on.
>>>
>>>Grrrrr...........
>>>
>>>;o(
>>>
>>>
>
>
>ANyone tried this new RNLA yet?
If so what are the verdicts?Just remember that guitar level is -20dB and look for a switch
on your rack box(es) to send into the input of your amp at that
level to optimise your signal to noise without overdrive or
distortion (unless you want it)
. "uptown jimmy" <johnson314@bellsouth.net> wrote:
>I would never disconnect that reverb. It's very sweet, and the tremolo that
>comes out of it is the best I've ever played. I'd just like to add digital
>delay from a rack-box; it's gonna be a lot easier to recreate my productions
>that way.
>
>Jimmy
>
>"Aaron Allen" <nospam@not_here.dude> wrote in message news:42e9c091@linux...
>> The impedence and level is wrong in that chain, and typically there is
a
>> pretty good sized EQ change in a tank circuit.... on top of that, you
>might
>> pop the FX pedal, I've seen some designs that have a pretty hefty voltage
>in
>> the signal to keep it hot into the tank.... a DMM should tell you if it's
>> safe or not. Shoot, you might like the sound of the odd impedence and
tone
>> tailoring.. just make sure to hit it for that voltage.
>>
>> AA
>>
>>
>> "RZ" <pearlmusic@sbcglobal.net> wrote in message news:42e9bcd8@linux...
>> > You could try unplugging the spring reverb and inserting it there.
Just
>a
>> > thought.
>> >
>> > RZ
>> >
>> >
>> > "cujo" <chris@applemanstudio.com> wrote in message
>> > news:42e98038$1@linux...
>> >>
>> >>
>> >> I have always disliked FX loops on amps. Put them before, you can
>always
>> >> use the extra gain for a bit more bite
>> >>
>> >>
>> >>
>> >> "uptown jimmy" <johnson314@bellsouth.net> wrote:
>> >> >Howdy.
>> >> >
>> >> >I've got a modified Fender Twin with the sweetest sound you ever
>heard.
>> >> I
>> >> >was thinking of adding a digital box to the mix for live work, and
>> > wondered
>> >> >how one utilizes such jobbies on an old amp with no fx send-return.
Do
>> > the
>> >> >various fx boxes have settings where you can chose the position of
the
>> >> >device, say "before amp" vs. "fx return"?
>> >> >
>> >> >Jimmy
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>>
>
>It gets even wierder. I have tested every card individually and combinations
of every cable between two cards. Everything worked fine. no matter which
cards where connected together with which cables. The problem started
rearing it's ugly head in a consistent way when I would add the third card.
Card B would not play.
I have never done this before, because things were working fine until
recently and my methodology had been based on the theory that the MEC clock
|
|
|
|
| Re: This is what pisses me off about Paris [message #56409 is a reply to message #56407] |
Sat, 30 July 2005 07:50 |
audioguy_nospam_
Messages: 60
Registered: June 2005
|
Member |
|
|
outs were self terminating if they didn't see another device.
Just for grins, I just terminated the BNC outs of each MEC with 75ohm
resistor caps.
It's working now. I don't have enough time on it to be convinced that this
is going to be the final solution, but it looks like the BNC out on MEC 2
may have been spewing..
I'm wondering if aging MECs are sort of like boats. When they get old, they
start getting leaky.
I'm going to do some major testing of this today and I'll be back later.
;o)
"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
news:42eb93fa$1@linux...
> I vote for ribbon cables... do you have any Cramolin or
> similar cleaner around? Try applying some to a seperate
> ribbon connector (one not bing used for Paris) then work
> that connector over the pins on the card... kind of like an
> applicator. You could even chop an old IDE cable end in half
> to use. This will wet the pins on the card and burnish
> the contacts without loading up your jumper ribbons with
> cleaning solution.
>
> David.
>
> DJ wrote:
> > Looks like it's a bad card or bad ribbon cable(s). Just booted the
system
> > and now the same thing is happening. It's happening on Submix B now
(which
> > was switched to card C last night). I've done enough testing to be
pretty
> > sure it's not one of the HD SCSI cables or one of the MECs.
> >
> > When loading my default .ppj, I'm getting a digital pulse in the global
> > fader. The only thing that stops this is switching the submix that is
> > assigned to card C to virtual and then back to card. This stops the
noise,
> > but after doing this, no audio will play through the submix that card C
is
> > assigned to.
> >
> > I guess I've got more testing to do. First I'm going to pull card B,
replace
> > it with card C and see if I have any problems with playback on either
MEC B
> > or C.
> >
> > If it won't play on either MEC, then it's likely the card. If it plays
on
> > one MEC but not the other, then it's likely the MEC.
> >
> > If it plays on both MECs, I'm going to start switching ribbon cables
between
> > the cards and see if one of them is the culprit.
> >
> > If I still have no problems, I'll be stumped 'cause cards A & B work
> > fine.......or so it seems right now.
> >
> > Maybe I'll get finished with this sometime today.
> >
> > ;o(
> >
> >
> > "Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> > news:42eb101e@linux...
> >
> >>The NICE thing about Paris is that it totally doesn't matter
> >>which MEC is on what card... it is completely assignable in
> >>the global master window... you can literally shuffle your
> >>MEC's around then reassign them without losing anything in
> >>the way of routing.
> >>
> >>David.
> >>
> >>DJ wrote:
> >>
> >>>I've been working for about 6 months with 3 EDS cards which are hooked
> >
> > up to
> >
> >>>three MECs. The last MEC doesn't have any analog I/O cards, just ADAT
> >
> > cards.
> >
> >>>I usually track to the first two MECs.
> >>>
> >>>Well, for some reason I can't fathom, suddenly MEC 3 stopped
> >>>sycing.........lots of digital hash. switching WC on and off would sync
> >
> > it
> >
> >>>back up. Then that stopped working. The switching the EDS card on
Submix
> >
> > 3
> >
> >>>in the global window to virtual and then back to card worked. Now that
> >
> > has
> >
> >>>stopped working. I thought it might be a bad cable so I switched the
> >
> > SCSI
> >
> >>>cable from MEC 3 to Card B and attached the cable from MEC 2 to card C
> >>>figuring that if it was either a card or cable, I could trace the
> >
> > problem.,
> >
> >>>Well, I found that that hooking this MEC #3 (which was previously
> >
> > attached
> >
> >>>Card C) to Card B and attaching Card C to MEC #2 (which was previously
> >>>attached MEC #3) totlly solves the problem.
> >>>Rock solid, no sync problems and absolutely no discernable reason for
> >
> > this
> >
> >>>behaviour. However, I did add an RME multiface to my Cubase SX system
> >>>yesterday and all of these devices are sharing a common clock so I'm
> >>>wondering if, by some cursed digital happenstance, this might have
> >
> > caused
> >
> >>>the problem. I sort of doubt it though because the system was starting
> >
> > to
> >
> >>>act erratic before I hooked up the Multiface to the SX DAW.
> >>>
> >>>I've got project in the works here that has 12 songs with lots of
tracks
> >
> > on
> >
> >>>each. There's still lots more tracking/dubs to do on this project and
|
|
|
|
| Re: This is what pisses me off about Paris [message #56412 is a reply to message #56409] |
Sat, 30 July 2005 10:40 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
> I'm wondering if aging MECs are sort of like boats. When they get old,
they
> start getting leaky.
>
> I'm going to do some major testing of this today and I'll be back later.
>
> ;o)
>
> "Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> news:42eb93fa$1@linux...
> > I vote for ribbon cables... do you have any Cramolin or
> > similar cleaner around? Try applying some to a seperate
> > ribbon connector (one not bing used for Paris) then work
> > that connector over the pins on the card... kind of like an
> > applicator. You could even chop an old IDE cable end in half
> > to use. This will wet the pins on the card and burnish
> > the contacts without loading up your jumper ribbons with
> > cleaning solution.
> >
> > David.
> >
> > DJ wrote:
> > > Looks like it's a bad card or bad ribbon cable(s). Just booted the
> system
> > > and now the same thing is happening. It's happening on Submix B now
> (which
> > > was switched to card C last night). I've done enough testing to be
> pretty
> > > sure it's not one of the HD SCSI cables or one of the MECs.
> > >
> > > When loading my default .ppj, I'm getting a digital pulse in the
global
> > > fader. The only thing that stops this is switching the submix that is
> > > assigned to card C to virtual and then back to card. This stops the
> noise,
> > > but after doing this, no audio will play through the submix that card
C
> is
> > > assigned to.
> > >
> > > I guess I've got more testing to do. First I'm going to pull card B,
> replace
> > > it with card C and see if I have any problems with playback on either
> MEC B
> > > or C.
> > >
> > > If it won't play on either MEC, then it's likely the card. If it plays
> on
> > > one MEC but not the other, then it's likely the MEC.
> > >
> > > If it plays on both MECs, I'm going to start switching ribbon cables
> between
> > > the cards and see if one of them is the culprit.
> > >
> > > If I still have no problems, I'll be stumped 'cause cards A & B work
> > > fine.......or so it seems right now.
> > >
> > > Maybe I'll get finished with this sometime today.
> > >
> > > ;o(
> > >
> > >
> > > "Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> > > news:42eb101e@linux...
> > >
> > >>The NICE thing about Paris is that it totally doesn't matter
> > >>which MEC is on what card... it is completely assignable in
> > >>the global master window... you can literally shuffle your
> > >>MEC's around then reassign them without losing anything in
> > >>the way of routing.
> > >>
> > >>David.
> > >>
> > >>DJ wrote:
> > >>
> > >>>I've been working for about 6 months with 3 EDS cards which are
hooked
> > >
> > > up to
> > >
> > >>>three MECs. The last MEC doesn't have any analog I/O cards, just ADAT
> > >
> > > cards.
> > >
> > >>>I usually track to the first two MECs.
> > >>>
> > >>>Well, for some reason I can't fathom, suddenly MEC 3 stopped
> > >>>sycing.........lots of digital hash. switching WC on and off would
sync
> > >
> > > it
> > >
> > >>>back up. Then that stopped working. The switching the EDS card on
> Submix
> > >
> > > 3
> > >
> > >>>in the global window to virtual and then back to card worked. Now
that
> > >
> > > has
> > >
> > >>>stopped working. I thought it might be a bad cable so I switched the
> > >
> > > SCSI
> > >
> > >>>cable from MEC 3 to Card B and attached the cable from MEC 2 to card
C
> > >>>figuring that if it was either a card or cable, I could trace the
> > >
> > > problem.,
> > >
> > >>>Well, I found that that hooking this MEC #3 (which was previously
> > >
> > > attached
> > >
> > >>>Card C) to Card B and attaching Card C to MEC #2 (which was
previously
> > >>>attached MEC #3) totlly solves the problem.
> > >>>Rock solid, no sync problems and absolutely no discernable reason for
> > >
> > > this
> > >
> > >>>behaviour. However, I did add an RME multiface to my Cubase SX system
> > >>>yesterday and all of these devices are sharing a common clock so I'm
> > >>>wondering if, by some cursed digital happenstance, this might have
> > >
> > > caused
> > >
> > >>>the problem. I sort of doubt it though because the system was
starting
> > >
> > > to
> > >
> > >>>act erratic before I hooked up the Multiface to the SX DAW.
> > >>>
> > >>>I've got project in the works here that has 12 songs with lots of
> tracks
> > >
> > > on
> > >
> > >>>each. There's still lots more tracking/dubs to do on this project and
> > >
> > > I've
> > >
> > >>>got a producer coming in tomorrow to discuss a label project. I'm
going
> > >
> > > be
> > >
> > >>>jacking around with reconfiguring my patchbay presets tonight to
> reflect
> > >
> > > the
> > >
> > >>>new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on the
> > >>>project I'm working on is playing back from the wrong &^$#^&^%&^&^%$
> > >
> > > submix.
> > >
> > >>>This stuff pisses me off to no end. This same thing started happening
> > >
> > > when I
> > >
> > >>>was using 2 x MECs and a 442.
> > >>>
> > >>>I thought I had a bad EDS card yesterday and I sent TheSoniq the
money
> > >
> > > for
> > >
> > >>>another one. Then the system started working normally again so I
called
> > >
> > > him
> > >
> > >>>and told him to hold off. I don't know if this is a card issue or
not,
> > >
> > > but
> > >
> > >>>I'm not gonna' get caught with my pants down so I'm going to tell him
> to
> > >>>send it on.
> > >>>
> > >>>Grrrrr...........
> > >>>
> > >>>;o(
> > >>>
> >
|
|
|
|
| Re: This is what pisses me off about Paris [message #56413 is a reply to message #56412] |
Sat, 30 July 2005 12:47 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
>>>
> > >
> > >
> > >
>
>Bad SCSI cable between MEC 2 and card B. It was getting intermittant. I have
replaced it with a new cable and so far I have done a number of reboots,
opening/closing of projects,etc and so far, so good. I guess it's always
possible that this may be only one of *more than one* problems, but with all
of the testing I've been doing and the consistent symptoms, this makes way
more sense than anything else.
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:42eb9137$1@linux...
>
> sounds like a card to me. I had that digi pulse thing happen and it was a
> card, but the card worked fine by itself...only got the hash when hooked
> in a multi card system
> rod
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >Looks like it's a bad card or bad ribbon cable(s). Just booted the system
> >and now the same thing is happening. It's happening on Submix B now
(which
> >was switched to card C last night). I've done enough testing to be pretty
> >sure it's not one of the HD SCSI cables or one of the MECs.
> >
> >When loading my default .ppj, I'm getting a digital pulse in the global
> >fader. The only thing that stops this is switching the submix that is
> >assigned to card C to virtual and then back to card. This stops the
noise,
> >but after doing this, no audio will play through the submix that card C
> is
> >assigned to.
> >
> >I guess I've got more testing to do. First I'm going to pull card B,
replace
> >it with card C and see if I have any problems with playback on either MEC
> B
> >or C.
> >
> >If it won't play on either MEC, then it's likely the card. If it plays on
> >one MEC but not the other, then it's likely the MEC.
> >
> >If it plays on both MECs, I'm going to start switching ribbon cables
between
> >the cards and see if one of them is the culprit.
> >
> >If I still have no problems, I'll be stumped 'cause cards A & B work
> >fine.......or so it seems right now.
> >
> >Maybe I'll get finished with this sometime today.
> >
> >;o(
> >
> >
> >"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> >news:42eb101e@linux...
> >> The NICE thing about Paris is that it totally doesn't matter
> >> which MEC is on what card... it is completely assignable in
> >> the global master window... you can literally shuffle your
> >> MEC's around then reassign them without losing anything in
> >> the way of routing.
> >>
> >> David.
> >>
> >> DJ wrote:
> >> > I've been working for about 6 months with 3 EDS cards which are
hooked
> >up to
> >> > three MECs. The last MEC doesn't have any analog I/O cards, just ADAT
> >cards.
> >> > I usually track to the first two MECs.
> >> >
> >> > Well, for some reason I can't fathom, suddenly MEC 3 stopped
> >> > sycing.........lots of digital hash. switching WC on and off would
sync
> >it
> >> > back up. Then that stopped working. The switching the EDS card on
Submix
> >3
> >> > in the global window to virtual and then back to card worked. Now
that
> >has
> >> > stopped working. I thought it might be a bad cable so I switched the
> >SCSI
> >> > cable from MEC 3 to Card B and attached the cable from MEC 2 to card
> C
> >> > figuring that if it was either a card or cable, I could trace the
> >problem.,
> >> > Well, I found that that hooking this MEC #3 (which was previously
> >attached
> >> > Card C) to Card B and attaching Card C to MEC #2 (which was
previously
> >> > attached MEC #3) totlly solves the problem.
> >> > Rock solid, no sync problems and absolutely no discernable reason for
> >this
> >> > behaviour. However, I did add an RME multiface to my Cubase SX system
> >> > yesterday and all of these devices are sharing a common clock so I'm
> >> > wondering if, by some cursed digital happenstance, this might have
> >caused
> >> > the problem. I sort of doubt it though because the system was
starting
> >to
> >> > act erratic before I hooked up the Multiface to the SX DAW.
> >> >
> >> > I've got project in the works here that has 12 songs with lots of
tracks
> >on
> >> > each. There's still lots more tracking/dubs to do on this project and
> >I've
> >> > got a producer coming in tomorrow to discuss a label project. I'm
going
> >be
> >> > jacking around with reconfiguring my patchbay presets tonight to
reflect
> >the
> >> > new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on the
> >> > project I'm working on is playing back from the wrong &^$#^&^%&^&^%$
> >submix.
> >> >
> >> > This stuff pisses me off to no end. This same thing started happening
> >when I
> >> > was using 2 x MECs and a 442.
> >> >
> >> > I thought I had a bad EDS card yesterday and I sent TheSoniq the
money
> >for
> >> > another one. Then the system started working normally again so I
called
> >him
> >> > and told him to hold off. I don't know if this is a card issue or
not,
> >but
> >> > I'm not gonna' get caught with my pants down so I'm going to tell him
> to
> >> > send it on.
> >> >
> >> > Grrrrr...........
> >> >
> >> > ;o(
> >> >
> >> >
> >
> >
>While I have no intention of giving up my PARIS system, I made wish to supplement
it with a modest Pro Tools setup. Many moons ago I owned a Mac, but have
long been a PC guy. Does LE work as well on the PC as it does on the Mac?Is there any way to stop xp from restarting when closing Paris 2.2?
ThanksIt's gotta be the ribbon cables. that's the only thing it could be.
Back to the drawing board.
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:42ebeac9@linux...
> Bad SCSI cable between MEC 2 and card B. It was getting intermittant. I
have
> replaced it with a new cable and so far I have done a number of reboots,
> opening/closing of projects,etc and so far, so good. I guess it's always
> possible that this may be only one of *more than one* problems, but with
all
> of the testing I've been doing and the consistent symptoms, this makes way
> more sense than anything else.
>
>
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
> news:42eb9137$1@linux...
> >
> > sounds like a card to me. I had that digi pulse thing happen and it was
a
> > card, but the card worked fine by itself...only got the hash when hooked
> > in a multi card system
> > rod
> > "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> > >Looks like it's a bad card or bad ribbon cable(s). Just booted the
system
> > >and now the same thing is happening. It's happening on Submix B now
> (which
> > >was switched to card C last night). I've done enough testing to be
pretty
> > >sure it's not one of the HD SCSI cables or one of the MECs.
> > >
> > >When loading my default .ppj, I'm getting a digital pulse in the global
> > >fader. The only thing that stops this is switching the submix that is
> > >assigned to card C to virtual and then back to card. This stops the
> noise,
> > >but after doing this, no audio will play through the submix that card C
> > is
> > >assigned to.
> > >
> > >I guess I've got more testing to do. First I'm going to pull card B,
> replace
> > >it with card C and see if I have any problems with playback on either
MEC
> > B
> > >or C.
> > >
> > >If it won't play on either MEC, then it's likely the card. If it plays
on
> > >one MEC but not the other, then it's likely the MEC.
> > >
> > >If it plays on both MECs, I'm going to start switching ribbon cables
> between
> > >the cards and see if one of them is the culprit.
> > >
> > >If I still have no problems, I'l
|
|
|
|
| Found it!!!! [message #56414 is a reply to message #56408] |
Sat, 30 July 2005 14:00 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
l be stumped 'cause cards A & B work
> > >fine.......or so it seems right now.
> > >
> > >Maybe I'll get finished with this sometime today.
> > >
> > >;o(
> > >
> > >
> > >"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> > >news:42eb101e@linux...
> > >> The NICE thing about Paris is that it totally doesn't matter
> > >> which MEC is on what card... it is completely assignable in
> > >> the global master window... you can literally shuffle your
> > >> MEC's around then reassign them without losing anything in
> > >> the way of routing.
> > >>
> > >> David.
> > >>
> > >> DJ wrote:
> > >> > I've been working for about 6 months with 3 EDS cards which are
> hooked
> > >up to
> > >> > three MECs. The last MEC doesn't have any analog I/O cards, just
ADAT
> > >cards.
> > >> > I usually track to the first two MECs.
> > >> >
> > >> > Well, for some reason I can't fathom, suddenly MEC 3 stopped
> > >> > sycing.........lots of digital hash. switching WC on and off would
> sync
> > >it
> > >> > back up. Then that stopped working. The switching the EDS card on
> Submix
> > >3
> > >> > in the global window to virtual and then back to card worked. Now
> that
> > >has
> > >> > stopped working. I thought it might be a bad cable so I switched
the
> > >SCSI
> > >> > cable from MEC 3 to Card B and attached the cable from MEC 2 to
card
> > C
> > >> > figuring that if it was either a card or cable, I could trace the
> > >problem.,
> > >> > Well, I found that that hooking this MEC #3 (which was previously
> > >attached
> > >> > Card C) to Card B and attaching Card C to MEC #2 (which was
> previously
> > >> > attached MEC #3) totlly solves the problem.
> > >> > Rock solid, no sync problems and absolutely no discernable reason
for
> > >this
> > >> > behaviour. However, I did add an RME multiface to my Cubase SX
system
> > >> > yesterday and all of these devices are sharing a common clock so
I'm
> > >> > wondering if, by some cursed digital happenstance, this might have
> > >caused
> > >> > the problem. I sort of doubt it though because the system was
> starting
> > >to
> > >> > act erratic before I hooked up the Multiface to the SX DAW.
> > >> >
> > >> > I've got project in the works here that has 12 songs with lots of
> tracks
> > >on
> > >> > each. There's still lots more tracking/dubs to do on this project
and
> > >I've
> > >> > got a producer coming in tomorrow to discuss a label project. I'm
> going
> > >be
> > >> > jacking around with reconfiguring my patchbay presets tonight to
> reflect
> > >the
> > >> > new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on
the
> > >> > project I'm working on is playing back from the wrong
&^$#^&^%&^&^%$
> > >submix.
> > >> >
> > >> > This stuff pisses me off to no end. This same thing started
happening
> > >when I
> > >> > was using 2 x MECs and a 442.
> > >> >
> > >> > I thought I had a bad EDS card yesterday and I sent TheSoniq the
> money
> > >for
> > >> > another one. Then the system started working normally again so I
> called
> > >him
> > >> > and told him to hold off. I don't know if this is a card issue or
> not,
> > >but
> > >> > I'm not gonna' get caught with my pants down so I'm going to tell
him
> > to
> > >> > send it on.
> > >> >
> > >> > Grrrrr...........
> > >> >
> > >> > ;o(
> > >> >
> > >> >
> > >
> > >
> >
>
>I have to manually shut my comp down to get 3.0 to close.
"Josh Herzog" <pruner1@hotmail.com> wrote:
>
>Is there any way to stop xp from restarting when closing Paris 2.2?
>
>ThanksI have PTLE running just fine on an Athalon 3200 in my office at home. Mainly
used for importing sessions and helping me get
more fluid in PT as I track into it a lot be default....
Not giving up my Paris systems, either :)
"Gary Flanigan" <gary_flanigan@ce9.uscourts.gov> wrote:
>
>While I have no intention of giving up my PARIS system, I made wish to supplement
>it with a modest Pro Tools setup. Many moons ago I owned a Mac, but have
>long been a PC guy. Does LE work as well on the PC as it does on the Mac?The biggest problem is remembering to check the
"enforce PC compatibility" at the final save so
it will open on a PC (assuming it is coming from a mac)
"John Macy" <spamlessjohn@johnmacymacy.com> wrote:
>
>I have PTLE running just fine on an Athalon 3200 in my office at home.
Mainly
The
>>While I have no intention of giving up my PARIS system, I made wish to
supplement
>>it with a modest Pro Tools setup. Many moons ago I owned a Mac, but have
>>long been a PC guy. Does LE work as well on the PC as it does on the Mac?
>Wow! I can't really justify the expenditure...and I'd have to rearrange
space...but it is almost too tempting! Thanks for the link.
"DJ&
|
|
|
|
| No I didn't !!!!! [message #56417 is a reply to message #56414] |
Sat, 30 July 2005 16:25 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
nics.com/index.html
>
> ...........now go build a sound-proof room
>
> ;o)
>
>Sad to hear, thanks for the post.
(As always, behind the times...)
"Mark McCurdy" <gmmccurdy@hotmail.com> wrote in message
news:42de74b2@linux...
> He gave it all he could Capn
>
> http://www.cnn.com/2005/SHOWBIZ/TV/07/20/obit.doohan.ap/inde x.html
>
>Nothing with it itself, meaning I like CW/Sonar, but just that the developer
of PARIS isn't using...well, PARIS! Particularly as he claimed that he had
his own version up and running and it was "great" (that was the one post of
his that really cheesed me, but, be that as it may, if he really did/does
have PARIS 4 running so great, I'd think he'd be using his own home-brew
version of it).
"chuck duffy" <c@c.com> wrote in message news:42d68b23$1@linux...
>
> I don't understand what is sad about that. PARIS was developed in code
warrior.
> The MAC versions of the plug-ins were developed with code warrior.
>
> "zornwil" <wilson.zorn@takeout_asterick_theobvious.com> wrote:
> >That's just sad.
> >
> >"Michael Yanoska" <yanoska@cox.net> wrote in message
> >news:42595563$1@linux...
> >>
> >> Apparently this is what has Edmund's interest lately:
> >>
> >> http://www.codecomments.com/archive241-2004-6-222597.html
> >
> >
>Uh, yeah, I should read others' replies before posting. :)
But anyway, that is what I meant, you got it justcron.
"justcron" <justcron@hydrorecords.compound> wrote in message
news:42d69147$1@linux...
>
> greetings sir.
>
>
> Its kinda sad that edmund has to mess around with CW instead of his baby
> PARIS...
>
>
> "chuck duffy" <c@c.com> wrote in message news:42d68b23$1@linux...
> >
> > I don't understand what is sad about that. PARIS was developed in code
> > warrior.
> > The MAC versions of the plug-ins were developed with code warrior.
> >
> > "zornwil" <wilson.zorn@takeout_asterick_theobvious.com> wrote:
> >>That's just sad.
> >>
> >>"Michael Yanoska" <yanoska@cox.net> wrote in message
> >>news:42595563$1@linux...
> >>>
> >>> Apparently this is what has Edmund's interest lately:
> >>>
> >>> http://www.codecomments.com/archive241-2004-6-222597.html
> >>
> >>
> >
>
>Don't turn anything off......................
--
Martin Harrington
www.lendanear-sound.com
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:42ebd9c4@linux...
> Turned everything off and took a break. Booted back up and the same crap
> started happening again. Switched submix off, then back on (something I
> haven't tried yet). It's working again.
>
> This is like chasing a ghost around.
>
> So far, temporary fixes nave been:
>
> 1. Flipping from WC to internal and then back again (worked for a while,
> then stopped)
>
> 2. Switching Card C from card to virtual (worked for a while, then
> stopped)
>
> 3. Terminating the BNC outputs (worked once, then stopped)
>
> 4. Turning Submix B off, then on again. Maybe this is the
> ticket..........but I doubt it, if history is any indicator.
>
> Still plugging away here.
>
> ;o{
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:42ebbbe8@linux...
>> It gets even wierder. I have tested every card individually and
> combinations
>> of every cable between two cards. Everything worked fine. no matter which
>> cards where connected together with which cables. The problem started
>> rearing it's ugly head in a consistent way when I would add the third
> card.
>> Card B would not play.
>>
>> I have never done this before, because things were working fine until
>> recently and my methodology had been based on the theory that the MEC
> clock
>> outs were self terminating if they didn't see another device.
>>
>> Just for grins, I just terminated the BNC outs of each MEC with 75ohm
>> resistor caps.
>>
>> It's working now. I don't have enough time on it to be convinced that
>> this
>> is going to be the final solution, but it looks like the BNC out on MEC 2
>> may have been spewing..
>>
>> I'm wondering if aging MECs are sort of like boats. When they get old,
> they
>> start getting leaky.
>>
>> I'm going to do some major testing of this today and I'll be back later.
>>
>> ;o)
>>
>> "Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
>> news:42eb93fa$1@linux...
>> > I vote for ribbon cables... do you have any Cramolin or
>> > similar cleaner around? Try applying some to a seperate
>> > ribbon connector (one not bing used for Paris) then work
>> > that connector over the pins on the card... kind of like an
>> > applicator. You could even chop an old IDE cable end in half
>> > to use. This will wet the pins on the card and burnish
>> > the contacts without loading up your jumper ribbons with
>> > cleaning solution.
>> >
>> > David.
>> >
>> > DJ wrote:
>> > > Looks like it's a bad card or bad ribbon cable(s). Just booted the
>> system
>> > > and now the same thing is happening. It's happening on Submix B now
>> (which
>> > > was switched to card C last night). I've done enough testing to be
>> p
|
|
|
|
| Re: This is what pisses me off about Paris [message #56425 is a reply to message #56413] |
Sat, 30 July 2005 17:02 |
Martin Harrington
Messages: 560
Registered: September 2005
|
Senior Member |
|
|
>>>new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on
>> > >>>the
>> > >>>project I'm working on is playing back from the wrong &^$#^&^%&^&^%$
>> > >
>> > > submix.
>> > >
>> > >>>This stuff pisses me off to no end. This same thing started
>> > >>>happening
>> > >
>> > > when I
>> > >
>> > >>>was using 2 x MECs and a 442.
>> > >>>
>> > >>>I thought I had a bad EDS card yesterday and I sent TheSoniq the
> money
>> > >
>> > > for
>> > >
>> > >>>another one. Then the system started working normally again so I
> called
>> > >
>> > > him
>> > >
>> > >>>and told him to hold off. I don't know if this is a card issue or
> not,
>> > >
>> > > but
>> > >
>> > >>>I'm not gonna' get caught with my pants down so I'm going to tell
>> > >>>him
>> to
>> > >>>send it on.
>> > >>>
>> > >>>Grrrrr...........
>> > >>>
>> > >>>;o(
>> > >>>
>> > >>>
>> > >
>> > >
>> > >
>>
>>
>
>D'oh!
"justcron" <justcron@hydrorecords.compound> wrote in message
news:42d9e6e3@linux...
> lol...
>
> "Craig Mitchell" <camitchell@cfl.rr.com> wrote in message
> news:BEFF3CF3.14463%camitchell@cfl.rr.com...
> >
> >
> > I think there is some confusion here between Codewarrior and CakeWalk.
> >
> >
> > Craig M
> >
> >
> >
> >
> > in article 42d6ac5e@linux, Mr Simplicity at animix_spamless_@animas.net
> > wrote on 7/14/05 2:03 PM:
> >
> >> Maybe he's sync'ing Cakewalk to Paris so he can use the Paris summing
> >> bus........
> >>
> >> ;o)
> >>
> >> "justcron" <justcron@hydrorecords.compound> wrote in message
> >> news:42d69147$1@linux...
> >>>
> >>> greetings sir.
> >>>
> >>>
> >>> Its kinda sad that edmund has to mess around with CW instead of his
baby
> >>> PARIS...
> >>>
> >>>
> >>> "chuck duffy" <c@c.com> wrote in message news:42d68b23$1@linux...
> >>>>
> >>>> I don't understand what is sad about that. PARIS was developed in
code
> >>>> warrior.
> >>>> The MAC versions of the plug-ins were developed with code warrior.
> >>>>
> >>>> "zornwil" <wilson.zorn@takeout_asterick_theobvious.com> wrote:
> >>>>> That's just sad.
> >>>>>
> >>>>> "Michael Yanoska" <yanoska@cox.net> wrote in message
> >>>>> news:42595563$1@linux...
> >>>>>>
> >>>>>> Apparently this is what has Edmund's interest lately:
> >>>>>>
> >>>>>> http://www.codecomments.com/archive241-2004-6-222597.html
> >>>>>
> >>>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
>
>I used to do this back in the test days to keep it from killing the OS by
save/close the project, wait 5 - 10 seconds, then kill the PARIS.EXE process
through the task manager (hit control + alt + delete keys). I don't have to
do this anymore, but it might help you out.
AA
"Josh Herzog" <pruner1@hotmail.com> wrote in message
news:42ec0825$1@linux...
>
> Is there any way to stop xp from restarting when closing Paris 2.2?
>
> Thanksdude, i'm so sorry!
On 30 Jul 2005 08:28:09 +1000, "scott h" <fresnelmusic@comcast.net>
wrote:
>
>I bent my F# once...
>
>the doctor gave me a topical creme and all was fine....
>
>
>
>
>
>
>"Kim" <hiddensounds@hotmail.com> wrote:
>>
>>
>>Was playing my ol' (well, 4 years is a long time these days) Kawai MP-9000,
>>which has the fantastic feature of real wooden keys for a proper piano feel.
>>
>>And I heard a little bit of a noise when playing one of the F#'s, and the
>>F next to it. Closer examination showed that the F# has apparently, being
>>wood, decided to warp, and is rubbing against the F next door. Still plays
>>alright, for now...
>>
>>A call to the service centre tells me that it will cost probably between
>>$100 and $300 to fix it, just for labour. Mind you I called Kawai and they're
>>willing to sell me a new F# key if I can put it in myself...
>>
>>...where's that screwdriver?
>>
>>Cheers,
>>Kim.Cool quiet case:
http://www.arctic-cooling.com/pc_case2.php?idx=12&data=1 &disc=oh you poor poor fool you. there is no real slution...only synthetic
ones...sorry. oh yeah, check your ps. this seems to be the first
sign. or try backing off the ps load.
On Sat, 30 Jul 2005 17:25:40 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:
>It's gotta be the ribbon cables. that's the only thing it could be.
>
>Back to the drawing board.
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:42ebeac9@linux...
>> Bad SCSI cable between MEC 2 and card B. It was getting intermittant. I
>have
>> replaced it with a new cable and so far I have done a number of reboots,
>> opening/closing of projects,etc and so far, so good. I guess it's always
>> possible that this may be only one of *more than one* problems, but with
>all
>> of the testing I've been doing and the consistent symptoms, this makes way
>> more sense than anything else.
>>
>>
>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>> news:42eb9137$1@linux...
>> >
>> > sounds like a card to me. I had that digi pulse thing happen and it was
>a
>> > card, but the card worked fine by itself...only got the hash when hooked
>> > in a multi card system
>> > rod
>> > "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> > >Looks like it's a bad card or bad ribbon cable(s). Just booted the
>system
>> > >and now the same thing is happening. It's happening on Submix B now
>> (which
>> > >was switched to card C last night). I've done enough testing to be
>pretty
>> > >sure it's not one of the HD SCSI cables or one of the MECs.
>> > >
>> > >When loading my default .ppj, I'm getting a digital pulse in the global
>> > >fader. The only thing that stops this is switching the submix that is
>> > >assigned to card C to virtual and then back to card. This stops the
>> noise,
>> > >but after doing this, no audio will play through the submix that card C
>> > is
>> > >assigned to.
>> > >
>> > >I guess I've got more testing to do. First I'm going to pull card B,
>> replace
>> > >it with card C and see if I have any problems with playback on either
>MEC
>> > B
>> > >or C.
>> > >
>> > >If it won't play on either MEC, then it's likely the card. If it plays
>on
>> > >one MEC but not the other, then it's likely the MEC.
>> > >
>> > >If it plays on both MECs, I'm going to start switching ribbon cables
>> between
>> > >the cards and see if one of them is the culprit.
>> > >
>> > >If I still have no problems, I'll be stumped 'cause cards A & B work
>> > >fine.......or so it seems right now.
>> > >
>> > >Maybe I'll get finished with this sometime today.
>> > >
>> > >;o(
>> > >
>> > >
>> > >"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
>> > >news:42eb101e@linux...
>> > >> The NICE thing about Paris is that it totally doesn't matter
>> > >> which MEC is on what card... it is completely assignable in
>> > >> the global master window... you can literally shuffle your
>> > >> MEC's around then reassign them without losing anything in
>> > >> the way of routing.
>> > >>
>> > >> David.
>> > >>
|
|
|
|
| Re: No I didn't !!!!! [message #56430 is a reply to message #56417] |
Sat, 30 July 2005 17:33 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
>cyrille
>Yeh, well we'll see. I've done a fair amount of dissassembly of things over
the years, but it can be quite a pain doing so on a complicated item.
From what I can tell though actually getting far enough in so that I can
at least make an assessment of what would be involved wont be that hard.
This guy says you simply undo the screws at the bottom and she opens up.
Have a look:
http://home.austin.rr.com/johner/action.htm
In any case I'd like to see what makes her tick. ;o)
Cheers
Kim
tubeguru <tubeguru@sbcglobal.net> wrote:
>The new key probably won't cost that much, (after all it's not a
>Sony...)but disassembling a keyboard can be quite involved. If you're
>accustomed to complicated dis and re-assembly it's not a big deal. Make
>sure you have more time than you bargained for and mark everything as
>you take it apart. Good luck!
>Mike
>
>Kim wrote:
>
>>Was playing my ol' (well, 4 years is a long time these days) Kawai MP-9000,
>>which has the fantastic feature of real wooden keys for a proper piano
feel.
>>
>>And I heard a little bit of a noise when playing one of the F#'s, and the
>>F next to it. Closer examination showed that the F# has apparently, being
>>wood, decided to warp, and is rubbing against the F next door. Still plays
>>alright, for now...
>>
>>A call to the service centre tells me that it will cost probably between
>>$100 and $300 to fix it, just for labour. Mind you I called Kawai and they're
>>willing to sell me a new F# key if I can put it in myself...
>>
>>....where's that screwdriver?
>>
>>Cheers,
>>Kim.
>>
>>I've not tried it, but I'll buy it immediately. I'm not so much into the RNP
(preamp), but the RNC is beyond amazing for the price.
Jimmy
"cujo" <chris@applemanstudio.com> wrote in message news:42eb9d5b$1@linux...
>
> ANyone tried this new RNLA yet?
> If so what are the verdicts?i have both (plus a whole lot more) let me say that i'm not impressed
with pt on a g5. i can do more on my 3yr. old pc with sx than i can
on a 2.0 g5 with pt le. but, then again i'm a jaded, prejudiced and
one sided. seriously though, macs ain't all that, they're just
another computer...no better and certainly no worse than anything else
out there if the os and the app coincide.
..
On 31 Jul 2005 08:57:33 +1000, "Gary Flanigan"
<gary_flanigan@ce9.uscourts.gov> wrote:
>
>While I have no intention of giving up my PARIS system, I made wish to supplement
>it with a modest Pro Tools setup. Many moons ago I owned a Mac, but have
>long been a PC guy. Does LE work as well on the PC as it does on the Mac?Well, I took a BNC T adapter, attached it to the WC cable coming out of my
Lucid GenX6 and split off 2 x short cables and ran them into the BNC inputs
of my RMEW HDSP 9652's. then I took another separate clock cable from a
header on the GenX6 directly to the clock input of the Multiface. Then I
replaced on of my $60.00 Zoalla WC cables with a $10.00 Canare from the
GenX6 to MEC #2/CardB. Submix 2 and 3 now play back fine.. The only problem
is that the digital I/O on MECs 2 and 3 aren't passing signal so I can't
patch my Quantec and Lexi across auxes on these submixes.
I'll get there, but I've definitely had better days.
;o(
"rick" <parnell68@hotmail.com> wrote in message
news:4u6oe193nmcot9jhgqeb0etgmickl697st@4ax.com...
> oh you poor poor fool you. there is no real slution...only synthetic
> ones...sorry. oh yeah, check your ps. this seems to be the first
> sign. or try backing off the ps load.
>
> On Sat, 30 Jul 2005 17:25:40 -0600, "DJ"
> <animix_spam-this-ahole_@animas.net> wrote:
>
> >It's gotta be the ribbon cables. that's the only thing it could be.
> >
> >Back to the drawing board.
> >
> >
> >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >news:42ebeac9@linux...
> >> Bad SCSI cable between MEC 2 and card B. It was getting intermittant. I
> >have
> >> replaced it with a new cable and so far I have done a number of
reboots,
> >> opening/closing of projects,etc and so far, so good. I guess it's
always
> >> possible that this may be only one of *more than one* problems, but
with
> >all
> >> of the testing I've been doing and the consistent symptoms, this makes
way
> >> more sense than anything else.
> >>
> >>
> >> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
> >> news:42eb9137$1@linux...
> >> >
> >> > sounds like a card to me. I had that digi pulse thing happen and it
was
> >a
> >> > card, but the card worked fine by itself...only got the hash when
hooked
> >> > in a multi card system
> >> > rod
> >> > "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >> > >Looks like it's a bad card or bad ribbon cable(s). Just booted the
> >system
> >> > >and now the same thing is happening. It's happening on Submix B now
> >> (which
> >> > >was switched to card C last night). I've done enough testing to be
> >pretty
> >> > >sure it's not one of the HD SCSI cables or one of the MECs.
> >> > >
> >> > >When loading my default .ppj, I'm getting a digital pulse in the
global
> >> > >fader. The only thing that stops this is switching the submix that
is
> >> > >assigned to card C to virtual and then back to card. This stops the
> >> noise,
> >> > >but after doing this, no audio will play through the submix that
card C
> >> > is
> >> > >assigned to.
> >> > >
> >> > >I guess I've got more testing to do. First I'm going to pull card B,
> >> replace
> >> > >it with card C and see if I have any problems with playback on
either
> >MEC
> >> > B
> >> > >or C.
> >> > >
> >> > >If it won't play on either MEC, then it's likely the card. If it
plays
> >on
> >> > >one MEC but not the other, then it's likely the MEC.
> >> > >
> >> > >If it plays on both MECs, I'm going to start switching ribbon cables
> >> between
> >> > >the cards and see if one of them is the culprit.
> >> > >
> >> > >If I still have no problems, I'll be stumped 'cause cards A & B work
> >> > >fine.......or so it seems right now.
> >> > >
> >> > >Maybe I'll get finished with this sometime today.
> >> > >
> >> > >;o(
> >> > >
> >> > >
> >> > >"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> >> > >news:42eb101e@linux...
> >> > >> The NICE thing about Paris is that it totally doesn't matter
> >> > >> which MEC is on what card... it is co
|
|
|
|
| Re: No I didn't !!!!! [message #56436 is a reply to message #56430] |
Sat, 30 July 2005 18:14 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
mally again so I
> >> called
> >> > >him
> >> > >> > and told him to hold off. I don't know if this is a card issue
or
> >> not,
> >> > >but
> >> > >> > I'm not gonna' get caught with my pants down so I'm going to
tell
> >him
> >> > to
> >> > >> > send it on.
> >> > >> >
> >> > >> > Grrrrr...........
> >> > >> >
> >> > >> > ;o(
> >> > >> >
> >> > >> >
> >> > >
> >> > >
> >> >
> >>
> >>
> >
>what the heck buddy...
Well.........shit!!!!!!! Guess what??? Removing the line UseHouseSync=1 from
the .cfg file, rebooting opening up a project, then closing, going back into
the .cfg file and adding the line again seems to have fixed things. I didn't
notice any misspelling of the text, but who knows? Maybe I had a pair of
character in this command line that were inverted
I think it would take me about an hour just to write down everything I've
tried today.
This is the first time I've fixed a DAW by massaging a .txt file.
I wonder if it will *stay* fixed?
;o)
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:42ec2687@linux...
> Well, I took a BNC T adapter, attached it to the WC cable coming out of my
> Lucid GenX6 and split off 2 x short cables and ran them into the BNC
inputs
> of my RMEW HDSP 9652's. then I took another separate clock cable from a
> header on the GenX6 directly to the clock input of the Multiface. Then I
> replaced on of my $60.00 Zoalla WC cables with a $10.00 Canare from the
> GenX6 to MEC #2/CardB. Submix 2 and 3 now play back fine.. The only
problem
> is that the digital I/O on MECs 2 and 3 aren't passing signal so I can't
> patch my Quantec and Lexi across auxes on these submixes.
>
> I'll get there, but I've definitely had better days.
>
> ;o(
>
> "rick" <parnell68@hotmail.com> wrote in message
> news:4u6oe193nmcot9jhgqeb0etgmickl697st@4ax.com...
> > oh you poor poor fool you. there is no real slution...only synthetic
> > ones...sorry. oh yeah, check your ps. this seems to be the first
> > sign. or try backing off the ps load.
> >
> > On Sat, 30 Jul 2005 17:25:40 -0600, "DJ"
> > <animix_spam-this-ahole_@animas.net> wrote:
> >
> > >It's gotta be the ribbon cables. that's the only thing it could be.
> > >
> > >Back to the drawing board.
> > >
> > >
> > >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >news:42ebeac9@linux...
> > >> Bad SCSI cable between MEC 2 and card B. It was getting intermittant.
I
> > >have
> > >> replaced it with a new cable and so far I have done a number of
> reboots,
> > >> opening/closing of projects,etc and so far, so good. I guess it's
> always
> > >> possible that this may be only one of *more than one* problems, but
> with
> > >all
> > >> of the testing I've been doing and the consistent symptoms, this
makes
> way
> > >> more sense than anything else.
> > >>
> > >>
> > >> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
> > >> news:42eb9137$1@linux...
> > >> >
> > >> > sounds like a card to me. I had that digi pulse thing happen and it
> was
> > >a
> > >> > card, but the card worked fine by itself...only got the hash when
> hooked
> > >> > in a multi card system
> > >> > rod
> > >> > "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> > >> > >Looks like it's a bad card or bad ribbon cable(s). Just booted the
> > >system
> > >> > >and now the same thing is happening. It's happening on Submix B
now
> > >> (which
> > >> > >was switched to card C last night). I've done enough testing to be
> > >pretty
> > >> > >sure it's not one of the HD SCSI cables or one of the MECs.
> > >> > >
> > >> > >When loading my default .ppj, I'm getting a digital pulse in the
> global
> > >> > >fader. The only thing that stops this is switching the submix that
> is
> > >> > >assigned to card C to virtual and then back to card. This stops
the
> > >> noise,
> > >> > >but after doing this, no audio will play through the submix that
> card C
> > >> > is
> > >> > >assigned to.
> > >> > >
> > >> > >I guess I've got more testing to do. First I'm going to pull card
B,
> > >> replace
> > >> > >it with card C and see if I have any problems with playback on
> either
> > >MEC
> > >> > B
> > >> > >or C.
> > >> > >
> > >> > >If it won't play on either MEC, then it's likely the card. If it
> plays
> > >on
> > >> > >one MEC but not the other, then it's likely the MEC.
> > >> > >
> > >> > >If it plays on both MECs, I'm going to start switching ribbon
cables
> > >> between
> > >> > >the cards and see if one of them is the culprit.
> > >> > >
> > >> > >If I still have no problems, I'll be stumped 'cause cards A & B
work
> > >> > >fine.......or so it seems right now.
> > >> > >
> > >> > >Maybe I'll get finished with this sometime today.
> > >> > >
> > >> > >;o(
> > >> > >
> > >> > >
> > >> > >"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> > >> > >news:42eb101e@linux...
> > >> > >> The NICE thing about Paris is that it totally doesn't matter
> > >> > >> which MEC is on what card... it is completely assignable in
> > >> > >> the global master window... you can literally shuffle your
> > >> > >> MEC's around then reassign them without losing anything in
> > >> > >> the way of routing.
> > >> > >>
> > >> > >> David.
> > >> > >>
> > >> > >> DJ wrote:
> > >> > >> > I've been working for about 6 months with 3 EDS cards which
are
> > >> hooked
> > >> > >up to
> > >> > >> > three MECs. The last MEC doesn't have any analog I/O cards,
just
> > >ADAT
> > >> > >cards.
> > >> > >> > I usually track to the first two MECs.
> > >> > >> >
> > >> > >> > Well, for some reason I can't fathom, suddenly MEC 3 stopped
> > >> > >> > sycing.........lots of digital hash. switching WC on and off
> would
> > >> sync
> > >> > >it
> > >> > >> > back up. Then that stopped working. The switching the EDS card
> on
> > >> Submix
> > >> > >3
> > >> > >> > in the global window to virtual and then back to card worked.
> Now
> > >> that
> > >> > >has
> > >> > >> > stopped working. I thought it might be a bad cable so I
switched
> > >the
> > >> > >SCSI
> > >> > >> > cable from MEC 3 to Card B and attached the cable from MEC 2
to
> > >card
> > >> > C
> > >> > >> > figuring that if it was either a card or cable, I could trace
> the
> > >> > >problem.,
> > >> > >> > Well, I found that that hooking this MEC #3 (which was
> previously
> > >> > >attached
> > >> > >> > Card C) to Card B and attaching Card C to MEC #2 (which was
> > >> previously
> > >> > >> > attached MEC #3) totlly solves the problem.
> > >> > >> > Rock solid, no sync problems and absolutely no discernable
> reason
> > >for
> > >> > >this
> > >> > >> > behaviour. However, I did add an RME multiface to my Cubase SX
> > >system
> > >> > >> > yesterday and all of these devices are sharing a common clock
so
> > >I'm
> > >> > >> > wondering if, by some cursed digital happenstance, this might
> have
> > >> > >caused
> >
|
|
|
|
| Re: No I didn't !!!!! [message #56438 is a reply to message #56436] |
Sat, 30 July 2005 18:36 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
ubt it though because the system was
> > >> starting
> > >> > >to
> > >> > >> > act erratic before I hooked up the Multiface to the SX DAW.
> > >> > >> >
> > >> > >> > I've got project in the works here that has 12 songs with lots
> of
> > >> tracks
> > >> > >on
> > >> > >> > each. There's still lots more tracking/dubs to do on this
> project
> > >and
> > >> > >I've
> > >> > >> > got a producer coming in tomorrow to discuss a label project.
> I'm
> > >> going
> > >> > >be
> > >> > >> > jacking around with reconfiguring my patchbay presets tonight
to
> > >> reflect
> > >> > >the
> > >> > >> > new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song
> on
> > >the
> > >> > >> > project I'm working on is playing back from the wrong
> > >&^$#^&^%&^&^%$
> > >> > >submix.
> > >> > >> >
> > >> > >> > This stuff pisses me off to no end. This same thing started
> > >happening
> > >> > >when I
> > >> > >> > was using 2 x MECs and a 442.
> > >> > >> >
> > >> > >> > I thought I had a bad EDS card yesterday and I sent TheSoniq
the
> > >> money
> > >> > >for
> > >> > >> > another one. Then the system started working normally again so
I
> > >> called
> > >> > >him
> > >> > >> > and told him to hold off. I don't know if this is a card issue
> or
> > >> not,
> > >> > >but
> > >> > >> > I'm not gonna' get caught with my pants down so I'm going to
> tell
> > >him
> > >> > to
> > >> > >> > send it on.
> > >> > >> >
> > >> > >> > Grrrrr...........
> > >> > >> >
> > >> > >> > ;o(
> > >> > >> >
> > >> > >> >
> > >> > >
> > >> > >
> > >> >
> > >>
> > >>
> > >
> >
>
>I saw a review by Fletcher on the Aurora. He was A/B'iing it against a Lavry
Blue. He said that it wasn't quite in the same ballpark but close. Then he
hooked it up to an Apogee Big Ben and reported that it was practically
indistinguishable from the Lavry.
.........'course, buying an Aurora and a Big Ben would cost about the same as
a Lavry.
;o)
"rick" <parnell68@hotmail.com> wrote in message
news:j57oe15qilp2no13g1coqhljrhmrr19o47@4ax.com...
> lynx aurora. i've got lynx two and the rme fw 800; the lynx (two) so
> far is the closest to paris. i can only imagine what the aurora
> sounds like.
>
> On Sat, 30 Jul 2005 15:37:05 +0200, "cyrille" <portscan@wanadoo.fr>
> wrote:
>
> >hi all
> >i'm looking for an 8 channel converters to add to my paris.
> >i need something quite good, that doesn't decrease the overall sound
quality
> >of the rig.
> >i saw frontier design tango 24
> >seems quite cheap on s/h
> >does any1 know this one or could recommend me something else?
> >i could also trade the adat card for an 8i card.
> >thx anyone who answers
> >cyrille
> >
>So I picked up a Kawai MP-9000 from Sydney over this weekend, along with
a reasonable 50 watt keyboard amp too which I was planning to sell, but am
now considering keeping... anyhow...
It has a little fault in the final preamp stage, where it does that thing
that amp circuits do at times, where you get this crackly hiss happenning,
or just crackling occassionally, and the hiss gets better and worse, and
you get a bit of distortion on the channel at times... I'm sure some of
you have heard this fault on gear before. I'm pretty sure it's just a transistor.
Anyhow, I pulled it apart to see what the chances are of fixing it myself,
and indeed fixing the bent key on my OTHER MP-9000...
So I had a look around the internals, and I got to thinking...
The thing is nicely laid out and divided up. Nice neat power supply on the
left. A couple of PCB's mounted to the displays, I/O and controls. The basic
digital end of things is taken care of by a single PCB in the middle, which
is straddled on one side by a board which seems to help interface the main
board with the controls and displays, and a board on the other side which
takes care of the audio output, including the preamps and I think the EQ
circuits which I think must be analog but controlled digitally, which is
sensible enough.
The basic MP-9000 itself though is a single board in the middle. The thing
that makes the sounds and controls
The MP-9000 has only 16 basic sounds. It's newer brother has 64 sounds. The
controls are identical. The display is identical. The preamp and EQ identical.
Far as I can tell the only difference between the two is that one single
board in the middle which deals with the digital core of things, and the
action of the keyboard itself which has some changes also.
But I'm thinking I could drop the main board of a 9500 striaight in this
baby and make myself a 9000/9500 hybrid... a 9250 if you will.
What's more there is a new MP-4 just released, once again with the same controls,
but more sound upgrades, better polyphony, but without the wooden keys. And
there are rumours another MP model is on the way to replace the 9000 series
which may have possibly even more sounds, or better sounds, or who knows
what.
I'm thinking of buying service manuals for some of these boards and seeing
if I think it's possible to swap out some of these parts between models.
If I can build myself a keyboard with all the benefits of wooden keys, plus
all the sounds of one of Kawai's newer keyboards...
....or maybe I should just spend the money on a seperate MIDI sound module
and be done with it... ;o) ...nah, ANYONE can do THAT. ;oP ;o)
Cheers,
Kim.3000$ ? for an aurora 16
oups
id rather find 2 8in + 1 8 out cards for such prices.... i aint a pro who
can put so much on a converter.
it's just to use 2 dp4's as sends you know...in a home studio.
thx anyway for the advices, i now know one more stuff i can't buy ;-))
"DJ" <animix_spam-this-ahole_@animas.net> a écrit dans le message de news:
42ec409b@linux...
> I saw a review by Fletcher on the Aurora. He was A/B'iing it against a
Lavry
> Blue. He said that it wasn't quite in the same ballpark but close. Then he
> hooked it up to an Apogee Big Ben and reported that it was practically
> indistinguishable from the Lavry.
>
> ........'course, buying an Aurora and a Big Ben would cost about the same
as
> a Lavry.
>
> ;o)
>
> "rick" <parnell68@hotmail.com> wrote in message
> news:j57oe15qilp2no13g1coqhljrhmrr19o47@4ax.com...
> > lynx aurora. i've got lynx two and the rme fw 800; the lynx (two) so
> > far is the closest to paris. i can only imagine what the aurora
> > sounds like.
> >
> > On Sat, 30 Jul 2005 15:37:05 +0200, "cyrille" <portscan@wanadoo.fr>
> > wrote:
> >
> > >hi all
> > >i'm looking for an 8 channel converters to add to my paris.
> > >i need something quite good, that doesn't decrease the overall sound
> quality
> > >of the rig.
> > >i saw frontier design tango 24
> > >seems quite cheap on s/h
> > >does any1 know this one or could recommend me something else?
> > >i could also trade the adat card for an 8i card.
> > >thx anyone who answers
> > >cyrille
> > >
> >
>
>i got the hehe part...so esplain the rest to me lucy.
On 31 Jul 2005 10:36:55 +1000, "Kim" <hiddensounds@hotmail.com> wrote:
>
>rick <parnell68@hotmail.com> wrote:
>>down there big fellah...don't forget the brother whose fault it is
>>always, is there to keep us safe from harm.
>
>Hehe, that is true... assuming I worked out it was offline, which I wouldn't
>have...
>
>Cheers,
>Kim.the engineers of lynx
avid A Hoatson
Admin Group
Admin Group
Avatar
Forum Administrator
Joined: October/01/2003
Location: United States
Posts: 407
Posted: May/28/2005 at 9:31am | IP Logged Quote David A Hoatson
Frankly, it won't do anything. It simply isn't possible for an
external clock to effect the audio of the Aurora one way or the other.
When our SynchroLock is ON, the Aurora is always running from its own
internal clock. If you connect an external clock source to the
Aurora, the SynchroLock will use this as its reference - but the
actual clock signal is still being generated inside the Aurora.
The only way an external clock could effect the audio quality is if
SynchroLock hadn't locked yet (the light was still flashing), or if
SynchroLock was switched off completely (only possible with the Aurora
Remote Mixer software & an AES16).
Edited by David A Hoatson on May/28/2005 at 9:32am
__________________
Thank you,
David A. Hoatson
Lynx Studio Technology, Inc.
Co-founder, Chief Software Architect
www.lynxstudio.com
On Sat, 30 Jul 2005 21:06:01 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:
>I saw a review by Fletcher on the Aurora. He was A/B'iing it against a Lavry
>Blue. He said that it wasn't quite in the same ballpark but close. Then he
>hooked it up to an Apogee Big Ben and reported that it was practically
>indistinguishable from the Lavry.
>
>........'course, buying an Aurora and a Big Ben would cost about the same as
>a Lavry.
>
>;o)
>
>"rick" <parnell68@hotmail.com> wrote in message
>news:j57oe15qilp2no13g1coqhljrhmrr19o47@4ax.com...
>> lynx aurora. i've got lynx two and the rme fw 800; the lynx (two) so
>> far is the closest to paris. i can only imagine what the aurora
>> sounds like.
>>
>> On Sat, 30 Jul 2005 15:37:05 +0200, "cyrille" <portscan@wanadoo.fr>
>> wrote:
>>
>> >hi all
>> >i'm looking for an 8 channel converters to add to my paris.
>> >i need something quite good, that doesn't decrease the overall sound
>quality
>> >of the rig.
>> >i saw frontier design tango 24
>> >seems quite cheap on s/h
>> >does any1 know this one or could recomme
|
|
|
|
| Re: No I didn't !!!!! [message #56444 is a reply to message #56438] |
Sun, 31 July 2005 03:08 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
#3 (which was
>> previously
>> > >> > >attached
>> > >> > >> > Card C) to Card B and attaching Card C to MEC #2 (which was
>> > >> previously
>> > >> > >> > attached MEC #3) totlly solves the problem.
>> > >> > >> > Rock solid, no sync problems and absolutely no discernable
>> reason
>> > >for
>> > >> > >this
>> > >> > >> > behaviour. However, I did add an RME multiface to my Cubase SX
>> > >system
>> > >> > >> > yesterday and all of these devices are sharing a common clock
>so
>> > >I'm
>> > >> > >> > wondering if, by some cursed digital happenstance, this might
>> have
>> > >> > >caused
>> > >> > >> > the problem. I sort of doubt it though because the system was
>> > >> starting
>> > >> > >to
>> > >> > >> > act erratic before I hooked up the Multiface to the SX DAW.
>> > >> > >> >
>> > >> > >> > I've got project in the works here that has 12 songs with lots
>> of
>> > >> tracks
>> > >> > >on
>> > >> > >> > each. There's still lots more tracking/dubs to do on this
>> project
>> > >and
>> > >> > >I've
>> > >> > >> > got a producer coming in tomorrow to discuss a label project.
>> I'm
>> > >> going
>> > >> > >be
>> > >> > >> > jacking around with reconfiguring my patchbay presets tonight
>to
>> > >> reflect
>> > >> > >the
>> > >> > >> > new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song
>> on
>> > >the
>> > >> > >> > project I'm working on is playing back from the wrong
>> > >&^$#^&^%&^&^%$
>> > >> > >submix.
>> > >> > >> >
>> > >> > >> > This stuff pisses me off to no end. This same thing started
>> > >happening
>> > >> > >when I
>> > >> > >> > was using 2 x MECs and a 442.
>> > >> > >> >
>> > >> > >> > I thought I had a bad EDS card yesterday and I sent TheSoniq
>the
>> > >> money
>> > >> > >for
>> > >> > >> > another one. Then the system started working normally again so
>I
>> > >> called
>> > >> > >him
>> > >> > >> > and told him to hold off. I don't know if this is a card issue
>> or
>> > >> not,
>> > >> > >but
>> > >> > >> > I'm not gonna' get caught with my pants down so I'm going to
>> tell
>> > >him
>> > >> > to
>> > >> > >> > send it on.
>> > >> > >> >
>> > >> > >> > Grrrrr...........
>> > >> > >> >
>> > >> > >> > ;o(
>> > >> > >> >
>> > >> > >> >
>> > >> > >
>> > >> > >
>> > >> >
>> > >>
>> > >>
>> > >
>> >
>>
>>
>as soon as i sober up.
;o)
On Sat, 30 Jul 2005 21:20:59 -0400, "justcron"
<justcron@hydrorecords.compound> wrote:
>and....and....and....there's always that brother to take the fall when
necessary.
On 31 Jul 2005 14:13:44 +1000, "Kim" <hiddensounds@hotmail.com> wrote:
>
>
>So I picked up a Kawai MP-9000 from Sydney over this weekend, along with
>a reasonable 50 watt keyboard amp too which I was planning to sell, but am
>now considering keeping... anyhow...
>
>It has a little fault in the final preamp stage, where it does that thing
>that amp circuits do at times, where you get this crackly hiss happenning,
>or just crackling occassionally, and the hiss gets better and worse, and
>you get a bit of distortion on the channel at times... I'm sure some of
>you have heard this fault on gear before. I'm pretty sure it's just a transistor.
>Anyhow, I pulled it apart to see what the chances are of fixing it myself,
>and indeed fixing the bent key on my OTHER MP-9000...
>
>So I had a look around the internals, and I got to thinking...
>
>The thing is nicely laid out and divided up. Nice neat power supply on the
>left. A couple of PCB's mounted to the displays, I/O and controls. The basic
>digital end of things is taken care of by a single PCB in the middle, which
>is straddled on one side by a board which seems to help interface the main
>board with the controls and displays, and a board on the other side which
>takes care of the audio output, including the preamps and I think the EQ
>circuits which I think must be analog but controlled digitally, which is
>sensible enough.
>
>The basic MP-9000 itself though is a single board in the middle. The thing
>that makes the sounds and controls
>
>The MP-9000 has only 16 basic sounds. It's newer brother has 64 sounds. The
>controls are identical. The display is identical. The preamp and EQ identical.
>Far as I can tell the only difference between the two is that one single
>board in the middle which deals with the digital core of things, and the
>action of the keyboard itself which has some changes also.
>
>But I'm thinking I could drop the main board of a 9500 striaight in this
>baby and make myself a 9000/9500 hybrid... a 9250 if you will.
>
>What's more there is a new MP-4 just released, once again with the same controls,
>but more sound upgrades, better polyphony, but without the wooden keys. And
>there are rumours another MP model is on the way to replace the 9000 series
>which may have possibly even more sounds, or better sounds, or who knows
>what.
>
>I'm thinking of buying service manuals for some of these boards and seeing
>if I think it's possible to swap out some of these parts between models.
>If I can build myself a keyboard with all the benefits of wooden keys, plus
>all the sounds of one of Kawai's newer keyboards...
>
>...or maybe I should just spend the money on a seperate MIDI sound module
>and be done with it... ;o) ...nah, ANYONE can do THAT. ;oP ;o)
>
>Cheers,
>Kim."Kim" <hiddensounds@hotmail.com> wrote:
>But I'm thinking I could drop the main board of a 9500 striaight in this
>baby and make myself a 9000/9500 hybrid... a 9250 if you will.
What hath Mr. Simplicity wrought?
:D"Neil" <OIUOI@IU.com> wrote in message news:42ecda19$1@linux...
>
> "Kim" <hiddensounds@hotmail.com> wrote:
>>But I'm thinking I could drop the main board of a 9500 striaight in this
>>baby and make myself a 9000/9500 hybrid... a 9250 if you will.
>
> What hath Mr. Simplicity wrought?
>
> :D
No doubt some rare form of gear slut insanity...
DonThe correct way to covert a 9000 and a 9500 into a 9250 is to saw both in
half at middle C and nail both halves back together.
g
"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>So I picked up a Kawai MP-9000 from Sydney over this weekend, along with
>a reasonable 50 watt keyboard amp too which I was planning to sell, but
am
>now considering keeping... anyhow...
>
>It has a little fault in the final preamp stage, where it does that thing
>that amp circuits do at times, where you get this crackly hiss happenning,
>or just crackling occassionally, and the hiss gets better and worse, and
>you get a bit of distortion on the channel at times... I'm sure some of
>you have heard this fault on gear before. I'm pretty sure it's just a transistor.
>Anyhow, I pulled it apart to see what the chances are of fixing it myself,
>and indeed fixing the bent key on my OTHER MP-9000...
>
>So I had a look around the internals, and I got to thinking...
>
>The thing is nicely laid out and divided up. Nice neat power supply on the
>left. A couple of PCB's mounted to the displays, I/O and controls. The basic
>digital end of things is taken care of by a single PCB in the middle, which
>is straddled on one side by a board which seems to help interface the main
>board with the controls and displays, and a board on the other side which
>takes care of the audio output, including the preamps and I think the EQ
>circuits which I think must be analog but controlled digitally, which is
>sensible enough.
>
>The basic MP-9000 itself though is a single board in the middle. The thing
>that makes the sounds and controls
>
>The MP-9000 has only 16 basic sounds. It's newer brother has 64 sounds.
The
>controls are identical. The display is identical. The preamp and EQ identical.
>Far as I can tell the only difference between the two is that one single
>board in the middle which deals with the digital core of things, and the
>action of the keyboard itself which has some changes also.
>
>But I'm thinking I could drop the main board of a 9500 striaight in this
>baby and make myself a 9000/9500 hybrid... a 9250 if you will.
>
>What's more there is a new MP-4 just released, once again with the same
controls,
>but more sound upgrades, better polyphony, but without the wooden keys.
And
>there are rumours another MP model is on the way to replace the 9000 series
>which may have possibly even more sounds, or better sounds, or who knows
>what.
>
>I'm thinking of buying service manuals for some of these boards and seeing
>if I think it's possible to swap out some of these parts between models.
>If I can build myself a keyboard with all the benefits of wooden keys, plus
>all the sounds of one of Kawai's newer keyboards...
>
>...or maybe I should just spend the money on a seperate MIDI sound module
>and be done with it... ;o) ...nah, ANYONE can do THAT. ;oP ;o)
>
>Cheers,
>Kim.rick <parnell68@hotmail.com> wrote:
>and....and....and....there's always that brother to take the fall when
>necessary.
I'm glad you mentioned that. I mean he was there when I came up with the
idea, so it was clearly his job to tell me if it wasn't going to work...
;oP"gene lennon" <glennon@NOSPmyrealbox.com> wrote:
>
>The correct way to covert a 9000 and a 9500 into a 9250 is to saw both in
>half at middle C and nail both halves back together.
>g
NOW we're talking! ;oP"Don Nafe" <dnafe@magma.ca> wrote:
>"Neil" <OIUOI@IU.com> wrote in message news:42ecda19$1@linux...
>> What hath Mr. Simplicity wrought?
>> :D
>No doubt some rare form of gear slut insanity...
>Don
Heheheheheheheww... ;oPI feel like I've found the son that I never had.
;o)
"Kim" <hiddensounds@hotmail.com> wrote in message news:42ece4fd$1@linux...
>
> "Don Nafe" <dnafe@magma.ca> wrote:
> >"Neil" <OIUOI@IU.com> wrote in message news:42ecda19$1@linux...
> >> What hath Mr. Simplicity wrought?
> >> :D
> >No doubt some rare form of gear slut insanity...
> >Don
>
> Heheheheheheheww... ;oP
>This is a multi-part message in MIME format.
---=_linux42ecfa21
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
"Kim" <hiddensounds@hotmail.com> wrote:
>
>"gene le
|
|
|
|
| Re: No I didn't !!!!! [message #56455 is a reply to message #56444] |
Sun, 31 July 2005 10:33 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
> >
> >> > >> > >Maybe I'll get finished with this sometime today.
> >> > >> > >
> >> > >> > >;o(
> >> > >> > >
> >> > >> > >
> >> > >> > >"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
> >> > >> > >news:42eb101e@linux...
> >> > >> > >> The NICE thing about Paris is that it totally doesn't matter
> >> > >> > >> which MEC is on what card... it is completely assignable in
> >> > >> > >> the global master window... you can literally shuffle your
> >> > >> > >> MEC's around then reassign them without losing anything in
> >> > >> > >> the way of routing.
> >> > >> > >>
> >> > >> > >> David.
> >> > >> > >>
> >> > >> > >> DJ wrote:
> >> > >> > >> > I've been working for about 6 months with 3 EDS cards which
> >are
> >> > >> hooked
> >> > >> > >up to
> >> > >> > >> > three MECs. The last MEC doesn't have any analog I/O cards,
> >just
> >> > >ADAT
> >> > >> > >cards.
> >> > >> > >> > I usually track to the first two MECs.
> >> > >> > >> >
> >> > >> > >> > Well, for some reason I can't fathom, suddenly MEC 3
stopped
> >> > >> > >> > sycing.........lots of digital hash. switching WC on and
off
> >> would
> >> > >> sync
> >> > >> > >it
> >> > >> > >> > back up. Then that stopped working. The switching the EDS
card
> >> on
> >> > >> Submix
> >> > >> > >3
> >> > >> > >> > in the global window to virtual and then back to card
worked.
> >> Now
> >> > >> that
> >> > >> > >has
> >> > >> > >> > stopped working. I thought it might be a bad cable so I
> >switched
> >> > >the
> >> > >> > >SCSI
> >> > >> > >> > cable from MEC 3 to Card B and attached the cable from MEC
2
> >to
> >> > >card
> >> > >> > C
> >> > >> > >> > figuring that if it was either a card or cable, I could
trace
> >> the
> >> > >> > >problem.,
> >> > >> > >> > Well, I found that that hooking this MEC #3 (which was
> >> previously
> >> > >> > >attached
> >> > >> > >> > Card C) to Card B and attaching Card C to MEC #2 (which was
> >> > >> previously
> >> > >> > >> > attached MEC #3) totlly solves the problem.
> >> > >> > >> > Rock solid, no sync problems and absolutely no discernable
> >> reason
> >> > >for
> >> > >> > >this
> >> > >> > >> > behaviour. However, I did add an RME multiface to my Cubase
SX
> >> > >system
> >> > >> > >> > yesterday and all of these devices are sharing a common
clock
> >so
> >> > >I'm
> >> > >> > >> > wondering if, by some cursed digital happenstance, this
might
> >> have
> >> > >> > >caused
> >> > >> > >> > the problem. I sort of doubt it though because the system
was
> >> > >> starting
> >> > >> > >to
> >> > >> > >> > act erratic before I hooked up the Multiface to the SX DAW.
> >> > >> > >> >
> >> > >> > >> > I've got project in the works here that has 12 songs with
lots
> >> of
> >> > >> tracks
> >> > >> > >on
> >> > >> > >> > each. There's still lots more tracking/dubs to do on this
> >> project
> >> > >and
> >> > >> > >I've
> >> > >> > >> > got a producer coming in tomorrow to discuss a label
project.
> >> I'm
> >> > >> going
> >> > >> > >be
> >> > >> > >> > jacking around with reconfiguring my patchbay presets
tonight
> >to
> >> > >> reflect
> >> > >> > >the
> >> > >> > >> > new MEC/Card assignments. Right now every %$#^&*%^#$%'ing
song
> >> on
> >> > >the
> >> > >> > >> > project I'm working on is playing back from the wrong
> >> > >&^$#^&^%&^&^%$
> >> > >> > >submix.
> >> > >> > >> >
> >> > >> > >> > This stuff pisses me off to no end. This same thing started
> >> > >happening
> >> > >> > >when I
> >> > >> > >> > was using 2 x MECs and a 442.
> >> > >> > >> >
> >> > >> > >> > I thought I had a bad EDS card yesterday and I sent
TheSoniq
> >the
> >> > >> money
> >> > >> > >for
> >> > >> > >> > another one. Then the system started working normally again
so
> >I
> >> > >> called
> >> > >> > >him
> >> > >> > >> > and told him to hold off. I don't know if this is a card
issue
> >> or
> >> > >> not,
> >> > >> > >but
> >> > >> > >> > I'm not gonna' get caught with my pants down so I'm going
to
> >> tell
> >> > >him
> >> > >> > to
> >> > >> > >> > send it on.
> >> > >> > >> >
> >> > >> > >> > Grrrrr...........
> >> > >> > >> >
> >> > >> > >> > ;o(
> >> > >> > >> >
> >> > >> > >> >
> >> > >> > >
> >> > >> > >
> >> > >> >
> >> > >>
> >> > >>
> >> > >
> >> >
> >>
> >>
> >
>After playing around a bit, I decided to buy Mackie's Tracktion 2 and use
it as a front end to Paris, sort of how some of you seem to be using Cubase.It's
really pretty inuitive as a songwriting tool if I can ever get what I'm trying
to do here to work. I'll be using Tracktion 2 mostly as a sequencer/VSTi
host for BFD, etc. to flesh out song ideas and then sum it through Paris
while doing any remaining true audio tracks in Paris.
I want to use Paris to control Tracktion. I'm using the Frontier Design Dakota/Sierra
configuration as the audio/midi card in the Tracktion machine and having
a hell of a time getting Sync to happen properly with my Paris rig. I can't
use the ADAT sync out of Paris v3 in Xp because of the known ADAT issues
in Paris Xpv3 (you can't even drive a regular ADAT with it) and it doesn't
appear that I have any other alternative but to stripe a SMPTE track in Paris
and use that to drive the Sierra/Dakota which converts the SMPTE to MTC which
Tracktion understands. My attempts at this approach are making me want to
buy an Sm-58, a 4 track Syncassette and a cheesey drum machine!
The Tracktion 2 MTC timecode set-up only has settings of 24, 25 or 30 fps
and no df or nd settings.Still I can get things to sync visually (frames
match in Paris and Tracktion interfaces) but get no audio until I hit stop
on the C16 and catch the tail of the last note(s) playing in Tracktion. If
I unlock Tracktion from Paris altogether Tracktion audio plays back fine
through Paris.(Sounds great actually - BFD is a great tool)
Anyway, any ideas as to what I am doing wrong here or what the problem might
be or even another approach I might take? I know I'm not worthy, but I almost
feel deej-like here in terms of my self imposed convolution!
Any help is greatly appreciated!
Cheers,
JonJon,
some thoughts below-
"Jon Jiles" <nospam@dude.com> wrote in message news:42ed4bfd$1@linux...
>
> After playing around a bit, I decided to buy Mackie's Tracktion 2 and use
> it as a front end to Paris, sort of how some of you seem to be using
Cubase.It's
> really pretty inuitive as a songwriting tool if I can ever get what I'm
trying
> to do here to work. I'll be using Tracktion 2 mostly as a sequencer/VSTi
> host for BFD, etc. to flesh out song ideas and then sum it through Paris
> while doing any remaining true audio tracks in Paris.
With you so far.
>
> I want to use Paris to control Tracktion. I'm using the Frontier Design
Dakota/Sierra
> configuration as the audio/midi card in the Tracktion machine and having
> a hell of a time getting Sync to happen properly with my Paris rig. I
can't
> use the ADAT sync out of Paris v3 in Xp because of the known ADAT issues
> in Paris Xpv3 (you can't even drive a regular ADAT with it)
The ADAT modules send ADAT timecode in Paris XP, the same as they do in Win
9x. The Paris SX driver doesn't recognize ADAT machines, but the module
sends timecode just fine.
I stopped having luck with the Dakota card once I upgraded from Cubase v1.6
to v2.0 because I was no longer able to match the buffer settings in the
Cubase SX application to the buffer settings in the Dakota control panel. My
theory is that for some reason, the Dakota ADAT sync input doesn't allow the
system to lock up properly to incoming Paris ADAT sync if the sync settings
can't be matched in the actual audio application and the Dakota control
panel. No clue why. I don't know about Traktion, but an RME card works
flawlessly with Paris ADAT sync in Cubase SX.
and it doesn't
> appear that I have any other alternative but to stripe a SMPTE track in
Paris
> and use that to drive the Sierra/Dakota which converts the SMPTE to MTC
which
> Tracktion understands. My attempts at this approach are making me want to
> buy an Sm-58, a 4 track Syncassette and a cheesey drum machine!
Brian T. posted a while back that he was using a pair of Steinberg MidEX
interfaces to lock Paris to Nuendo.This might be the ticket for you.
>
> The Tracktion 2 MTC timecode set-up only has settings of 24, 25 or 30 fps
> and no df or nd settings.Still I can get things to sync visually (frames
> match in Paris and Tracktion interfaces) but get no audio until I hit stop
> on the C16 and catch the tail of the last note(s) playing in Tracktion. If
> I unlock Tracktion from Paris altogether Tracktion audio plays back fine
> through Paris.(Sounds great actually - BFD is a great tool)
Yep, sounds like som sort of buffer issue you have there.
>
> Anyway, any ideas as to what I am doing wrong here or what the problem
might
> be or even another approach I might take? I know I'm not worthy, but I
almost
> feel deej-like here in terms of my self imposed convolution!
I heard rumors that he accidentally tripped behind his equipment rack and
was devoured by snakes.
>
> Any help is greatly appreciated!
>
> Cheers,
> Jon
If the card don't fit, you must quit.......RME=problem free
The snake eater.
;o)For some time I've been ranting and raving about the possibility of moving
to St Kilda, which, for those of you who don't live in or know Melbourne
(all but about 2 of you ;o) is an inner city suburb by the beach, full of
flats, pubs, bars, flats, cafes, bakeries, pubs, restaurants, bars, pubs,
lots of public transport, pubs and bars, oh, and did I mention pubs...
Last night however I went to another Melbourne suburb, being Northcote, and
went to a bar, and a pub. ;o) Northcote has been on the possibility list
for a while, but I think last night has nidged it up the list. Firstly, I
really liked the two places we went last night. At the second bar, for example,
a band was packing up, and I saw the guy packing up his double bass... and
a band with a double bass sounds promising to me... and meanwhile, as the
band was finished, some old 40's music was playing through the PA. The bar
before that had on one of my favourite CD's of the last few years, being
David Holmes "Come Get it. I Got it".
Plus, Northcote is only about 15 minutes from work, whereas St Kilda is more
like 45 minutes...
....but Northcote isn't near the beach! )o;
....mind you, in my price range, in St Kilda I'm likely to only get some
tiny little 2 bedroom flat in a multistory block, whereas in Northcote I
might actually get myself a small actual house, which would be good, and
have spaces to park more than one car... and, of course, not being a multistory
flat, I may be able to get away with actually doing some recording of loud
instruments.
I think I might have to change destinations...
Cheers,
Kim.In which area are you most likely to get laid, and by who?
;o)
"Kim" <hiddensounds@hotmail.com> wrote in message news:42ed6e0e$1@linux...
>
>
> For some time I've been ranting and raving about the possibility of moving
> to St Kilda, which, for those of you who don't live in or know Melbourne
> (all but about 2 of you ;o) is an inner city suburb by the beach, full of
> flats, pubs, bars, flats, cafes, bakeries, pubs, restaurants, bars, pubs,
> lots of public transport, pubs and bars, oh, and did I mention pubs...
>
> Last night however I went to another Melbourne suburb, being Northcote,
and
> went to a bar, and a pub. ;o) Northcote has been on the possibility list
> for a while, but I think last night has nidged it up the list. Firstly, I
> really liked the two places we went last night. At the second bar, for
example,
> a band was packing up, and I saw the guy packing up his double bass...
and
> a band with a double bass sounds promising to me... and meanwhile, as
the
> band was finished, some old 40's music was playing through the PA. The bar
> before that had on one of my favourite CD's of the last few years, being
> David Holmes "Come Get it. I Got it".
>
> Plus, Northcote is only about 15 minutes from work, whereas St Kilda is
more
> like 45 minutes...
>
> ...but Northcote isn't near the beach! )o;
>
> ...mind you, in my price range, in St Kilda I'm likely to only get some
> tiny little 2 bedroom flat in a multistory block, whereas in Northcote I
> might actually get myself a small actual house, which would be good, and
> have spaces to park more than one car... and, of course, not being a
multistory
> flat, I may be able to get away with actually doing some recording of loud
> instruments.
>
> I think I might have to change destinations...
>
> Cheers,
> Kim..........ummmm........errr......by whom?
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:42ed6f17@linux...
> In which area are you most likely to get laid, and by who?
>
> ;o)
>
> "Kim" <hiddensounds@hotmail.com> wrote in message news:42ed6e0e$1@linux...
> >
> >
> > For some time I've
|
|
|
|
Goto Forum:
Current Time: Wed Dec 04 17:17:30 PST 2024
Total time taken to generate the page: 0.02230 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
